Beli Anko Pb-2 Double Tortilla Press bekas (88.744)

Kondisi: bekas, Doble press penyearah, dengan 2 meja berukuran 110 x 65 cm Hsdpfx Aaezb A N Ne Iep

Kondisi: hampir baru (bekas), JBT Double D 2-rakowy piec obrotowy. Mieści 2 wózki o wymiarach 18 x 30 (cal). Bardzo czysty i zadbany. Przeznaczony do zastosowań piekarniczych. Hedpfx Aashyuchj Isp

Kondisi: baru, Tahun pembuatan: 2025, Various models available! 1. Briquette diameter: Ø 200 mm 2. Capacity: 12,000 kg/hour (steel) Hjdpjgv I N Uofx Aa Iop 3. Preliminary compression force: 50 tons 4. Main compression cylinder pressure: 800 tons 5. Maximum operating pressure: 300 bar 6. Cycle time: 10 - 12 seconds 7. Electric motor power: 6x37=222 kW (main motors) 8. Machine dimensions: 11,000 mm x 10,000 mm 9. Machine weight: 60,000 kg 10. Screw-driven feed systems automatically fill the compression chamber, and the integrated vibrating hopper ensures chamber safety by preventing oversized material from entering. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is implemented. 13. Pumps and valves of the hydraulic system are from PARKER or BOSCH-REXROTH brands. 14. Machine is fully automatic via PLC control. 15. All electrical and electronic components are from SCHNEIDER or SIEMENS brands. 16. The machine is CE-certified. This marking certifies that the product complies with European directives regarding consumer safety, health, or the environment. 17. The machine is covered by a one (1) year or three thousand (3,000) operating hours warranty against manufacturing defects under AYMAS Makina San. Ve Tic. Ltd. Şti.

Kondisi: baru, Tahun pembuatan: 2025, Also available in various models! 1. Briquette diameter: Ø 120 mm 2. Capacity: 1,800 – 2,200 kg/hour (iron and steel) 3. Preliminary press force: 15 tonnes 4. Main compression cylinder force: 400 tonnes 5. Maximum operating pressure: 300 bar 6. Cycle time: 12 – 14 seconds 7. Electric motor power: 75 kW 8. Machine dimensions (width x length x height): 3,200 mm x 4,200 mm x 3,500 mm 9. Machine weight: 13,000 kg 10. Auger-driven feed units automatically fill the compression chamber, and the integrated vibrating hopper provides additional safety by preventing oversized material from entering the chamber. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is installed. Hodpodfc Ikofx Aa Ijp 13. Hydraulic system pumps and valves are of the PARKER or BOSCH-REXROTH brands. 14. Machine is fully automatic via PLC control. 15. All electrical and electronic components are from SCHNEIDER or SIEMENS. 16. The machine is CE-certified. The marking certifies that the product complies with European guidelines regarding consumer safety, health, and environmental protection. 17. The machine is covered by AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or two thousand five hundred (2,500) operating hours.

Kondisi: sangat baik (bekas), NOMOR KATALOG 7993 DATA TEKNIS - bidang muat: 2 - penekan samping yang dapat disetel manual: 2x4 unit - penekan vertikal pneumatik: 2x4 unit - panjang maksimum elemen yang direkatkan: 2500 mm - tinggi maksimum elemen yang direkatkan: 1330 mm - ketebalan maksimum elemen yang direkatkan: 110 mm - panduan untuk merekatkan elemen tipis - dimensi (P/L/T): 3000x1350x2000 mm - berat: 900 kg KEUNGGULAN – dua area kerja – panjang perekat 2500 mm – silinder pneumatik – panduan untuk merekatkan elemen tipis – tidak dicat – mobil – dilengkapi roda Hedpfx Aaszh H Egs Iop – press bekas, kondisi sangat baik Harga netto: 13.900 PLN Harga netto: 3.300 EUR Harga netto dihitung dengan kurs 4,2 PLN/EUR (dalam hal fluktuasi kurs yang signifikan, harga dapat berubah)

Kondisi: bekas, Tahun pembuatan: 2023, nomor mesin/kendaraan: H300SV23-17, gaya penekanan: 300 t, panjang langkah: 1.000 mm, lebar meja: 1.000 mm, panjang meja: 1.200 mm, berat keseluruhan: 21.000 kg, gaya bantalan cetakan: 130 t, langkah bantalan cetakan: 300 mm, Kontrol dan Data Dasar • Kontrol: SIEMENS PLC • Gaya tekan / Kapasitas: 300 t • Daya motor: 30 kW • Tahun pembuatan: 2023 • Nomor seri: H300SV23-17 Ruang Press • Diameter silinder: 380 mm • Langkah: 1000 mm • Ukuran alat (maks.): 1400 × 1200 mm • Berat alat (maks.): 5.000 kg Bantalan Tarik • Langkah bantalan tarik: 300 mm • Gaya bantalan tarik: 130 t Kecepatan • Kecepatan maju: 160 mm/dtk • Kecepatan mundur: 200 mm/dtk Hidraulik dan Nilai Koneksi • Kapasitas pompa: 103 l/menit • Kapasitas oli: 1100 l • Tekanan operasi: 243 bar Hsdpfezhlg Aex Aa Iop • Tegangan operasi: 380 V • Frekuensi: 50 Hz • Arus maksimum: 60 A Mesin tersedia segera, sudah dibongkar dan dapat diperiksa.

Kondisi: sangat baik (bekas), Perangkat yang terlihat pada foto adalah mesin press tuas manual yang kokoh dari merek ASTOR, model 52M. Press tipe ini digunakan untuk riveting, crimping, pemasangan ring, kancing tekan serta operasi perakitan lainnya pada produk kulit, galanteri, alas kaki dan tekstil. Deskripsi Produsen: ASTOR Model: 52M Jumlah: 2 unit Penggerak manual dengan tuas Konstruksi besi cor yang kuat Dapat dipasang berbagai alat kerja Dasar stabil untuk pengikatan ke meja Konstruksi sederhana dan andal Hsdpfx Ajzgtz Soa Iep Ideal untuk bengkel galanteri, alas kaki dan upholsteri

Kondisi: sangat baik (bekas), NOMOR KATALOG 8008 SPESIFIKASI TEKNIS - area pemuatan: 2 - penjepit samping yang dapat diatur secara manual: 2x6 buah - penjepit atas pneumatik: 2x2 buah - panjang maksimum elemen yang direkatkan: 3000 mm - tinggi maksimum elemen yang direkatkan: 1000 mm - ketebalan maksimum elemen yang direkatkan: 100 mm - dimensi (p/l/t): 3000x1300x1650 mm - berat: sekitar 600 kg KEUNGGULAN – dua area kerja – panjang pengeleman 3000 mm – tidak dicat – mobil – dengan roda – mesin press bekas, kondisi sangat baik Harga netto: 12.900 PLN Harga netto: 3.071 EUR (berdasarkan kurs 4,20 PLN/EUR) Hedpfxsy T Rdys Aa Iep (Harga dapat berubah tergantung fluktuasi kurs yang lebih besar)

Kondisi: sangat baik (bekas), For sale: a robust, double-station bookbinding/graphic press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. The machine was previously used by the public institution Stadt Fürth (Germany), guaranteeing its completeness and careful maintenance. Hjdpfsxzu Rqox Aa Iep The device features two independent working stations, a heavy-duty top beam, and pressure adjustment via lever mechanism. The lower chassis houses the mechanical and electrical systems; power is supplied via a CEE 16A (400V) connector. The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, graphic arts, model making, technical work, and all applications requiring uniform pressure over a larger surface area. It is ideal for book blocks, covers, laminates, paper and cardboard components, as well as other materials needing pressing or stabilization under pressure. Technical condition: – The equipment is complete – All levers and mechanisms operate correctly – 400V power supply, CEE 16A plug – Mobile, wheeled construction – Normal signs of use visible in the photos – Machine ready for immediate operation Manufacturer: Karl Tränklein K.G. Country of origin: Germany (Made in Germany)

Kondisi: bekas, Data teknis: Diameter maksimum mata gergaji: 300 mm Ketinggian potong maksimum: 110 mm Lebar potong maksimum: 2.800 mm Kemampuan pengaturan sudut mata gergaji hingga 45° Penjepit pneumatik Pengangkatan mata gergaji pneumatik Tekanan kerja: 6 bar Sakelar keselamatan Daya listrik: 400 V Daya motor: 2,5 kW Dimensi keseluruhan: Panjang: 1100 mm Lebar: 3600 mm Hsdpfxszhubie Aa Isp Tinggi: 1300 mm

Kondisi: bekas, Data teknis: Diameter maksimum mata gergaji: 300 mm Lebar potong maksimum dengan dua mata gergaji: 2700 mm Lebar potong minimum dengan dua mata gergaji: 250 mm Hedszht Tqjpfx Aa Ijp Kemampuan pemotongan sudut Daya motor: 2 x 2,2 kW Daya listrik: 380 V Dimensi: Tinggi: 1300 mm Panjang: 3600 mm Lebar: 1000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, EXNER Press EXSBZRD 500/100 Kekuatan tekan 5.000 kN Hsdpfxjzhtmqo Aa Iep Ukuran alat 1.800 x 1.200 mm Panjang langkah maks. 600 mm Kecepatan kerja 16/30 mm/dtk Kecepatan gerak cepat 400 mm/dtk Termasuk sistem pengumpanan dan transfer

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Helmerding Press Tipe: KDH 315/2100/2 Gaya tekan: 3.150 kN Ketinggian langkah: 40-200 mm Jumlah langkah: 20-100 1/menit Penyesuaian ram: 120 mm Tinggi pemasangan: 500 mm Ukuran meja: 2.000 x 1.200 mm Ukuran ram: 2.000 x 1.100 mm Berat mesin: 44.000 kg Helmerding Roller Feeder Tipe: EWH 800/150 Lebar strip: 100 - 800 mm Ketebalan strip: 0,5 - 6,0 mm Helmerding Straightening Machine Tipe: R-70/800/9-S Lebar strip: 100 - 800 mm Ketebalan strip: 0,5 - 5,0 mm Diameter roll pelurus: 70 mm Jumlah roll pelurus: 9 buah Hodpjzhtl Tsfx Aa Ijp Helmerding Decoiler Tipe: HE-4/800/MOT/HYD Lebar strip: 100 - 800 mm Berat coil maks.: 4.000 kg Diameter dalam coil: 508 mm Diameter luar coil: 1000 – 1.600 mm

Kondisi: bekas, Tahun pembuatan: 1950, de2hu-it-lt-lv-nb-nl-pl Hsdpex Sr Evjfx Aa Iep

Kondisi: bekas, Tahun pembuatan: 1978, Zulässige Hubzahl in Relation zum Mat.-vorschub bei 300 mm = 40-60 Hübe 150 mm= 120 Hübe Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Type AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, ohne Grube). Blechband führt über die Abrollhaspel hinweg zum einseitigen Zangenvorschubapparat und dann in die Maschine. • HEILBRONN Coilabwickelgerät Type HAEMH 4000/500 S #204753 mit Coilablage- Platz, in welchem das Coil aufgegriffen und gespannt wird und dann wieder in Zurück in Position fährt, max. Coilgewicht 4000 kg, Coil-Ø max. 1500 mm, max. Bandbreite 500 mm, • angebauter Richtapparat für maximale Blechbreite 400 mm, die Blechführung ist In der Breite verstellbar, Blechstärke verstellbar 1-3 mm • automatische Öl-Umlaufschmierung mit Überwachung, • hydr. Überlastsicherung, motorische Stößelverstellung 125 mm • Förderband für die fertigen Pressteile, separater Schaltschrank -1990 modernisiert- Admissible number of strokes in relation to material feed: 300 mm = 40–60 strokes, 150 mm = 120 strokes. Accessories/Special Equipment: • FREI / WEINGARTEN straightening unit, type AMR 04 So, with subsequent overhead loop control (space-saving, no pit required). The strip runs over the decoiler to a single-sided gripper feed unit and then into the machine. • HEILBRONN coil unwinder, type HAEMH 4000/500 S #204753, with coil storage station, where the coil is picked up, clamped, and then moved back into position. Max. coil weight 4,000 kg; max. coil diameter 1,500 mm; max. strip width 500 mm. • Integrated straightening device for max. sheet width 400 mm, adjustable sheet guide width, thickness adjustable 1–3 mm Hjdst Hwz Nepfx Aa Ijp • Automatic oil circulation lubrication with monitoring • Hydraulic overload protection, motorized ram adjustment 125 mm • Conveyor belt for finished pressed parts, separate control cabinet – modernized 1990.

Kondisi: bekas, Tahun pembuatan: 1985, Pressing force: 63 t Passage width: 1350 mm Stroke: 300 mm Total power requirement: 16 kW Machine weight approx.: 10 t Space requirement approx.: 2.0 x 1.8 x 3.4 m HYDRAP Hydraulic double-column press (embossing press with sliding table) Type: HPDb 63 Year of manufacture: 1985 Serial no.: H 40/5273 Pressing capacity of upper ram: 63 t Return force: 7 t Stroke approx.: 300 mm Table size: 1200 x 500 mm Ram plate: 1200 x 500 mm Max. installation height (without tool changer): approx. 400 mm Stroke speeds up/down / full load: 400/400 or 16 mm/sec Clearance between uprights (front): 1350 mm Clearance between uprights (side): 350 mm Ejector in ram pressure/stroke: 1.2 t / 19 mm Pump drive: 11 kW Hodpfxet Hwxus Aa Iop Total drive approx. 16 kW - 380 V - 50 Hz Weight approx.: 10,000 kg Machine dimensions (W x D x H): 2.0 x 1.8 x 3.4 m (+ shuttle table) Accessories / Special equipment Stable double-column frame press with adjustable quadruple prism guides, equipped with: • Hydropneumatic sliding table (approx. 625 mm transverse stroke) with two clamping surfaces, which accommodate the pressed parts and the lower tool, position them under the ram, and after the pressing operation transport them to the rear onto a stacking device. The table then returns to the starting position. This system can be easily removed or modified. • CNC press controller (Siemens S5) with monitor for input of all relevant process data or for saving tooling data, allowing for easier and faster machine setup and for monitoring part transport. Shuttle table holder. • SICK light barriers fitted at the front press area/ loading station. • The ram is equipped with an electromechanical depth stop (300 mm stroke) and hydraulic tool clamping device, as well as integrated hydraulic ejector. • Displays for pressure and oil temperature, part counter, foot switch, two-hand release, central lubrication, hydraulic oil flow cooling, free-standing electrical cabinet, etc. The machine was used for pressing edge trims on cylinder head gaskets. Condition: Good to very good – demonstration ready, under power Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1987, Pressure 125 t Upright distance 1050 mm Stroke 250 mm Total power requirement 40 kW Machine weight approx. 8.5 t Space requirement approx. m DUNKES CNC control system type CNC 1000, controlled drawing cushion, 4-fold prism guide, SICK light curtain, contact pressure gauge, Hjdpfot Hwuiox Aa Iep Cutting impact damping

Kondisi: bekas, Tahun pembuatan: 1990, Pressing force: 3 t Reach: 0 mm Stroke: 200 mm Total power requirement: 15 kW Machine weight approx.: 4 t Space requirement approx.: m JENNY – Switzerland, automatic double-column straightening press Type RZ-205/3-600, Year of manufacture 1990, Serial no. 86 596 Upper ram pressing force 3 t Ram stroke approx. 200 mm Maximum installation height: 500 mm Maximum clamping length of workpiece: 600 mm Height of center above table approx.: 210 mm Ram speed up: 0.17 mm/sec Ram speed down: 0.02 – 0.17 mm/sec Pump drive: 15 kW Total drive: approx. 20 kW – 380 V – 50 Hz Weight approx.: 4,000 kg Accessories / Special equipment: Machine without automatic workpiece feed, the parts (shaft-shaped) are inserted manually, in front of the working area there is a Plexiglas sliding cover, manually operated Currently equipped with 1 straightening punch and 4 pneumatic measuring points, but connection options for up to 7 measuring points. These are longitudinally adjustable on the lower press table over a range of approx. 500 mm, the straightening punch is adjustable on the upper ram in a prism guide 2 tailstocks adjustable on the press table up to a maximum clamping length of 600 mm, left side motor-driven with clamping quill, right side with indexing disc Workpiece rotation via stepper motor from 10 to 100 rpm 2 workpiece supports (prisms) left and right, for supporting the workpiece The workpiece is measured at predetermined points and straightened accordingly, the straightening process is monitored and controlled with the measuring device Hjdot Hw Amepfx Aa Ijp Straightening stroke control for preset ram stroke Left tailstock motorized Original JENNY cycle control (FMS) in separate control cabinet with monitor and keyboard, parameter input,

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force: 10 t Throat width: 500 mm Stroke: 200 mm Total power requirement: 10 kW Hjdpfx Aet Hwwdja Isp Machine weight: approx. 4,500 kg Space requirement: approx. m M A E Automatic double-column straightening press with microprocessor control Model: ADS F 10 RH Year of construction: 1984 Serial No.: 5 002 84 00 Straightening force - Upper ram pressing capacity: 10 t Return force: 7.5 t Ram stroke: 200 mm Stroke speed: 100 mm/s Distance between table and ram (max.): 160 mm Workpiece clamping length, approx.: 600 mm Max. installation height: 600 mm Pump drive: 5.5 kW Total drive approx.: 10 kW – 380 V – 50 Hz Weight approx.: 4,500 kg Machine height approx.: 3,300 mm Accessories / Special Features: • FEINPRÜF measuring and sequence control MILLITRON P 2070 with display screen for fully automatic straightening process: load workpiece, measure the “bend,” position the workpiece at “maximum bend at the top,” straightening process, control measurement (and if necessary re-straightening), eject workpiece. • Machine equipped with a short workpiece feed using a lift beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points for one workpiece; 2 workpiece supports on the left and right, as well as 1 pneumatically adjustable straightening anvil. • The straightening punches are individually pneumatically controlled. • Gripper for scrap parts that are no longer straightenable, mounted at the rear. Condition: good to very good – will be available for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Further straightening presses in stock – please contact us for details.

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force 500 t Clear width 750 mm Stroke 120 mm Total power requirement 57 kW Machine weight approx. 16 t Space requirement approx. ... m HYDRAP CNC press control and Siemens Simatic S5 control, continuously adjustable workpiece transport unit around the right column, table size 400 x 740 mm, max. installation height 200 mm Hedot Hwpyopfx Aa Iop

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 200 t, Mesin Press Tekuk – 200 T – Lebar Terbuka 1.600 mm Untuk dijual: Mesin press tekuk hidrolik buatan DURENDUS dengan kapasitas tekanan maksimum 200 ton. Mesin ini memiliki lebar terbuka 1.600 mm, tinggi pemasangan maksimum 1.200 mm, serta langkah kerja 1.000 mm, sehingga sangat cocok untuk pekerjaan tekuk, pembentukan, dan pelurusan dalam aplikasi industri. ##### Data Teknis + Informasi: Mesin Press Tekuk – 200 T – Lebar Terbuka 1.600 mm ==== Keterangan Umum - ID Referensi: ME-2026-A-180_DE-2026-ME-215-01 - Tipe: Press rangka 2-tiang - Produsen: DURENDUS - Tekanan kerja: 200 T (dapat diatur) - Lebar terbuka: 1.600 mm - Tinggi terbuka: 1.200 mm - Luas kerja ram: 1.500 mm - Tinggi meja dari lantai: 850 mm - Dimensi keseluruhan (L × P × T): sekitar 1.300 × 2.700 × 3.900 mm - Bobot total: sekitar 5.300 kg ==== Silinder Hidrolik - Langkah: 0–1.000 mm - Tekanan kerja: 270 bar - Diameter silinder: Ø 220 mm - Diameter batang piston: Ø 130 mm - Diameter panduan tiang: Ø 160 mm - Kecepatan kerja: 3 mm/detik - Kecepatan pendekatan: 9 mm/detik - Kecepatan balik: 20 mm/detik ==== Hidrolik & Penggerak - Pompa hidrolik: ASC - Kapasitas aliran: 40 l/menit - Daya motor: 7,5 kW - Akurasi tekanan: ±5 bar - Volume tangki: 160 l - Oli hidrolik: HLP46 (tidak termasuk dalam pengiriman) ==== Kontrol Hsdpfszg Nu Uox Aa Iep - Pengoperasian: pedal kaki - Pengaturan tekanan: manual melalui rotary knob - Pembatas langkah: manual menggunakan sensor - PLC keamanan - Panel kontrol dengan indikator peringatan dan status ==== Keamanan - PLC keamanan - Desain sesuai standar CE - Pemantauan keamanan pada semua proses ==== Sambungan Listrik - Catu daya utama: 400 V AC - Tegangan kontrol: 24 V DC - Frekuensi: 50 Hz - Daya terpasang motor utama: 7,5 kW - Daya terpasang total: sekitar 11 kW - Derajat perlindungan panel listrik: IP54 ##### Bidang aplikasi: pembengkokan, pembentukan, pengerjaan pelat, pengerjaan logam, konstruksi baja, fabrikasi tangki, manufaktur mesin, produksi job order, produksi batch kecil (Mesin press tekuk, mesin press tekuk hidrolik, mesin press hidrolik, mesin press hidrolik, mesin press 200 T, mesin press 200 ton, mesin press bending, mesin tekuk, mesin tekuk pelat, mesin press pembentuk, mesin press industri, mesin press roll, mesin press baterai) Anda mencari mesin press hidrolik yang disesuaikan dengan kebutuhan aplikasi Anda? Hubungi kami untuk penawaran khusus. Mesin press hidrolik kami diproduksi sesuai dengan standar direktif mesin Jerman, serta direktif mesin Eropa (Direktif 2006/42/EC), standar EC, dan ketentuan keselamatan UE. Selain itu, mesin kami melampaui standar keselamatan Kanada dan Eropa karena juga memenuhi semua persyaratan standar keselamatan nasional Brasil NR 12 yang didasarkan pada standar tersebut. Kekuatan utama kami adalah pembuatan mesin khusus dan otomasi mesin press. Kami menawarkan mesin press hidrolik yang dirancang khusus dengan harga yang sangat kompetitif. Komponen hidrolik utama menggunakan produk dari produsen terkemuka Eropa.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, daya: 3 kW (4,08 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, gaya penekanan: 16 t, panjang langkah: 100 mm, lebar meja: 440 mm, panjang meja: 320 mm, jarak antara tiang: 500 mm, kapasitas tangki oli: 60 l, panjang total: 1.040 mm, lebar total: 1.030 mm, tinggi total: 2.000 mm, Dijual: Mesin press hidrolik 16 ton dalam kondisi baik. HANS SCHOEN TES 16, mesin press hidrolik dua kolom Tahun pembuatan: 1986 Gaya tekan: 160 kN Daya motor: 3 kW, 380 V, 50 Hz Pengoperasian dua tangan Tinggi pemasangan: 280 mm Jangkauan stroke: 100 mm Lebar meja: 440 mm Kedalaman meja: 320 mm Dimensi mesin: Tinggi: 200 cm Lebar: 103 cm Hjdezf Ilcjpfx Aa Ijp Panjang: 104 cm Berat: 1000 kg.

Kondisi: bekas, Tahun pembuatan: 1978, press-description-001 Hsdpfxsvuk Ips Aa Ijp

Kondisi: bekas, Pressing force 200 t Distance between uprights 1600 mm Maximum ram stroke 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm Ram surface area 1600 x 1300 mm T-slots DIN 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% Pressing speed 20 mm/s at 100% Drawing cushion force 800 kN Drawing cushion stroke 150 mm Drawing cushion speed up 68 / down 225 mm/s Hodpfsg S R Twox Aa Iep Retrofit year 2001

Tahun pembuatan: 1978, Kondisi: bekas, Press force 2000 / 1000* t Column distance 2650 mm Stroke 500 mm Side opening between columns 500 x 1000 mm Plunger diameter 710 mm Number of pressure cylinders 2 Distance table / ram 1000 mm Operating pressure 130 / 230 bar Overall height 800 mm Table length 2500 mm Table width 1600 mm Table height 250 mm Return force 500 kN Number of T-slots 8 Spindle speed 1500 rpm Rapid traverse speed 120 - 140 mm/min Closing speed max. 120 - 140 mm/sec Ram return via small separate cylinder 100 - 110 mm/sec Hydraulic ram locking Noise suppressor 300 t Cushion force 200 t Cushion stroke 250 mm Hjdpfjd Ih Ncjx Aa Isp Cushion speed 100 mm/sec Frequency 50 Hz Voltage 380 V Oil volume 2000 l Total power requirement 93 kW Machine weight approx. 100 t Space requirement approx. 5000 x 2500 x 7200 mm Transport dimensions approx. 6500 x 3750 x 2190 mm *Conversion: 1991 installation of a drawing cushion, new nameplate due to pressure reduction – PO 1000: Machine is currently limited to 1000 tonnes (Reason: tools were only rated for 1000 tonnes) The press ran flawlessly until it was dismantled and replaced by a press line. Important for accident prevention regulations (UVV): The press is equipped with a hydraulic ram locking system!