Beli Crecon Dimter 2004 bekas (1.070)

Kondisi: baik (bekas), Tahun pembuatan: 1992, Fully automatic, programmable cross-cutting with additional defect marking detection for error removal via LUT system. Csdol H E Taepfx Aiuerc Infeed conveyor length: 6 m 6 ejection stations, total length 12 m Currently, the infeed conveyor is not operating; the issue is likely due to the frequency inverter.

Kondisi: baik (bekas), Tahun pembuatan: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Infeed table: automatic / throughfeed system Csdpjt Ir Nqjfx Aiujrc Outfeed table 3 ejectors on the left outfeed table. Total length: 15.50 m Optimization with automatic defect detection and automatic cut pattern programming. Available immediately. Spare parts and documentation included.

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood Cedpfx Aiew Sy T Hsuerc System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, lebar kerja: 230 mm, berat keseluruhan: 2.500 kg, kecepatan spindel (maks.): 6.000 rpm, 5-spindle WEINIG DIMTER PROFIMAT 23 E ini diproduksi pada tahun 1998. Mesin ini memiliki lebar kerja 230 mm dan kisaran tinggi kerja 8-120 mm. Mesin bekerja dengan kecepatan spindle 6000 rpm dan kecepatan feeding 5-24 m/menit. Jika Anda mencari mesin pengolahan kayu berkualitas tinggi, pertimbangkan WEINIG DIMTER PROFIMAT 23 E yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. Crjdpfjzaq Tasx Aiusc • Deskripsi kondisi: Tidak direkondisi - tanpa garansi • Tinggi kerja: 8-120 mm • Jumlah spindle: 5 (atas, kanan, kiri, bawah, atas) • Kecepatan feeding: 5-24 m/menit • Daya total terpasang: sekitar 25 kW • Panjang meja feeding: sekitar 2000 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 89257, gaya penekanan: 60 t, tegangan masuk: 380 V, tinggi total: 2.000 mm, jenis arus masuk: tiga fasa, tinggi kerja: 2.000 mm, panjang total: 9.500 mm, lebar kabinet kontrol: 1.000 mm, lebar total: 2.000 mm, tahun perombakan terakhir: 2026, tekanan: 100 batang, tegangan kontrol: 12 V, tinggi benda kerja (maks.): 120 mm, kecepatan rotasi (maks.): 6.000 rpm, tekanan udara: 8 batang, Kami menawarkan lini finger jointing WEINIG Dimter HK200 siap pakai ini, tahun pembuatan 1996. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami. Crodpfozatztjx Aiuec

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 450 mm, ketinggian potong (maks.): 250 mm, kedalaman pemotongan: 200 mm, lebar pemotongan (maks.): 250 mm, panjang total: 25.000 mm, tahun perombakan terakhir: 2025, Latvijas kokapstrādes uzņēmums piedāvā pārdošanai Weinig Dimter OptiCut 304 L optimizācijas šķērsgriešanas līniju. Iekārtai ir bijuši tikai divi īpašnieki – abi labi zināmi uzņēmumi Latvijā. Pēdējos 8 gadus iekārtu esam darbinājuši paši. Crodpfx Aieza Iadsujc Pārdošanas iemesls – nesen iegādāta jauna Weinig tehnika. Iekārta ir pilnā darba kārtībā, šobrīd uzglabāta apsildāmās telpās un gatava nodošanai nākamajam īpašniekam. Iekārta strādājusi tikai vienā maiņā. Aprīkota ar 5 šķirošanas cilindriem, taču šķirošanas konveijeru iespējams pagarināt un uzstādīt papildu cilindrus, ja nepieciešams. Iekārtu iespējams apskatīt un demonstrēt darbībā mūsu ražotnē. Visa iekārtas ekspluatācijas laikā veikta regulāra apkope un remonti, lai nodrošinātu maksimālu ražīgumu, rentabilitāti un optimizācijas kvalitāti. Iekārta darbojas ar izcilu precizitāti. Oriģinālā rūpnīcas komplektācija nav mainīta. Rezerves daļas regulāri iegādātas no oficiālā Weinig dīlera Latvijā. Iekārta skatāma un testējama Kuldīgā, Latvijā. Pieejamas arī dažas rezerves daļas šai iekārtai. Pieejama visa Weinig ražotāja oriģināldokumentācija. Pārdodam arī Weinig pirkstsavienojumu līniju, kas iegādāta kopā ar šo iekārtu. Sīkāka informācija atsevišķā sludinājumā. Sīkākai informācijai lūdzam sazināties pa tālruni vai e-pastu – sniegšu visu tehnisko informāciju, kā arī varu sagatavot papildus attēlus vai video.

Kondisi: bekas, Tahun pembuatan: 2007, de2en_machineseeker_20240627_01 Csdpfey Tpqfex Aiujrc

Kondisi: bekas, Tahun pembuatan: 2005, de-001 Crjdpfx Ajy S Di Tjiujc

Kondisi: bekas, Tahun pembuatan: 2004, OC700-20240625-1 Crodex Eblvjpfx Aiusc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 142 mm, produsen pengendali: SIEMENS, model controller: WS 400-20, CNC machining center from 1997. This WEINIG / DIMTER Unicontrol 10 offers a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It features a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking for high-quality CNC processing solutions, you should consider the WEINIG / DIMTER Unicontrol 10, which we are offering for sale. Contact us for further details. • Max. workpiece height: 100 mm • Min. workpiece height: 40 mm • Min. workpiece width: 40 mm • Max. workpiece width: 140 mm • Max. workpiece length with CNC stop: 3,500–3,600 mm • X-axis travel: 3,000–3,500 mm (depending on version) • Cross-cut saw motor power: 3.7 kW • Cross-cut saw spindle speed: 2,800–3,000 rpm • Cross-cut saw max. tool diameter: 400 mm • Cross-cut saw spindle diameter: 40 mm • Number of tenoning/grooving spindles: 2 units • Tenoning spindle diameter: 50 mm • Clamping length of tenoning spindle: 400–640 mm • Tenoning spindle max. tool diameter: 400 mm • Tenoning spindle 1 motor power: 11 kW • Tenoning spindle 2 motor power: 15 kW • Tenoning spindle speed: 2,900–3,250 rpm • Number of profiling spindles (vertical): 2–3 units • Profiling spindle diameter: 50 mm Cedpfx Ajy Ixpaeiuerc • Clamping length of profiling spindle: 320–400 mm • Profiling spindle max. tool diameter (swing circle): 232 mm • Profiling spindle motor power: 11 kW (each) • Profiling spindle speed: 6,000 rpm • Motor power of horizontal profiling unit (top): 3 kW • Spindle diameter of horizontal profiling unit: 40 mm • Horizontal profiling unit max. tool diameter: 130 mm • Horizontal profiling unit speed: 5,850 rpm

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan WEINIG Dimter OPTICUT S75-4 bekas ini untuk optimalisasi jalur gergaji melintang, tahun pembuatan 2004. Crodpfx Aiey S T Uxeujc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 1.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8135.44, ketinggian potong (maks.): 100 mm, kedalaman pemotongan: 300 mm, Gergaji hebat, selalu memotong hingga 0,5 mm; untuk usianya, jarang digunakan. Crjdsyngnispfx Aiusc

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), this WEINIG Unimat 500 was manufactured in 2005. The robust woodworking machine features a working area of 230 x 120 mm and five spindles, ensuring efficient operation with variable feed speeds ranging from 4 to 30 m/min. The spindle power is 4 kW for infeed and outfeed, and 7.5 kW for the right/left and top spindles. Take advantage of this opportunity to purchase the WEINIG Unimat 500 woodworking machine. Contact us for further information about this machine. Credpeyaihpsfx Aiuec • Groove guidance and hydraulic nuts • Working area (W x H): 230 x 120 mm • Number of spindles: 5 • Variable feed speed: 4 - 30 m/min • Spindle power: bottom (infeed): 4 kW / right / left: 7.5 kW each / top: 7.5 kW / bottom (outfeed): 4 kW Additional equipment • Includes approx. 70 Z4 cutterheads • Several hundred new blank knives with toothed backs It is possible to purchase the WEINIG Unimat 500 alone (without the Weinig Rondamat 931 profile knife grinder and additional tools) at a price of €37,000.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Konveyor, sabuk pengangkut, belt conveyor. Dimensi: P 7600 x L 350 x T 900 mm. Lebar sabuk: 240 mm. Motor magnet permanen 3 fase Rexroth. Telah dibersihkan, diperbaiki & diuji fungsinya. Cjdpfxjvn Sk Ss Aiuorc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Weinig Dimter Profipress C 2800 P - 6 m Gluing Press, year 2009 Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of laminated timber panels and components from softwood. The machine is engineered for efficient production using PVAC glue in class D2 / D3 and can process materials within defined width, thickness, and input length parameters. According to the documentation, this model can accommodate materials with a width of 30 to 80 mm, thickness of 15 to 40 mm, and input lengths from 2100 to 2800 mm. The machine allows for the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. Capacity is up to 10–15 cycles per minute, depending on the input width. The Profipress C 2800 P - 6 m is intended for softwood processing. The permissible curvature of the material is max. 5 mm per meter. The documentation also specifies the recommended operating conditions, including an ambient temperature of 15 to 30 degrees Celsius and relative humidity of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Output: max. 10–15 cycles/min, depending on input width - Wood width: 30–80 mm - Wood thickness: 15–40 mm - Input wood length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Type of wood: softwood - Permissible curvature: max. 5 mm/m Credpjyvgiasfx Aiusc - Adhesive type: PVAC D2 / D3 - Recommended working temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press intended for laminated panel production - Machine from renowned manufacturer Weinig Dimter - Capacity up to 10–15 cycles per minute - Capability to produce panels with variable widths - Suitable for softwood processing - Compatible with standard PVAC D2 / D3 adhesives - Industrial application in joineries and production facilities

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Optimizator Grecon Dimter OptiCut 304R Panjang kayu masuk minimum: 900 mm dengan pemuatan pada konveyor rantai melintang Lebar kayu min./maks.: 40-200 mm Tebal kayu min./maks.: 15-80 mm Penurunan, pemotongan dan percepatan: 0,5 – 1 detik Akurasi pemotongan: min. 0,8 mm, maks. 1,5 mm Penampang kayu maksimal: 200×25 mm, 170×50 mm, 80×80 mm, 140×60 mm Diameter mata gergaji: 400 x 30 mm Kecepatan putaran mata gergaji: 4200 rpm Kecepatan maju maks.: 170 m/menit Crjdoyxltyspfx Aiusc Konveyor sabuk pengeluaran material dengan 6 pendorong Mode pemotongan: 1. Pemotongan dengan panjang tetap 2. Optimasi panjang papan untuk memaksimalkan hasil 3. Penghapusan cacat kayu dengan penandaan kapur Panjang total lini: 21 m Tahun produksi: 2000

Kondisi: hampir baru (bekas), Spare parts & accessories Dimter + GreCon + REX + Kupfermühle + Cook Bolinders Various items in stock for planing machines and finger jointing lines: Kupfermühle Rex Crjdpolifbdofx Aiusc Cook Bolinders Dimter GreCon Simply inquire

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 700 mm, penggerak gergaji: 15.000 W, daya motor servo: 11.000 W, Mesin direkondisi total / seperti baru dengan sistem kelistrikan baru kontrol Siemens S7 baru Penyelesaian setelah pemesanan Pemotong otomatis dengan deteksi garis kapur Penampang kayu 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Diameter mata gergaji 650/700 mm Kecepatan pengumpan 120 m/menit Motor gergaji 15 kW Penggerak servo SEW 11,00 kW dengan konverter penyesuaian ketebalan elektrik Cjdpev Diy Aofx Aiusrc

Kondisi: perlu perbaikan (bekas), Fungsionalitas: belum diuji, Keilzinkenanlage dimter HK 400 Mesin finger joint untuk paket kayu Panjang input: 800–6.000 mm Tinggi frais: 285 mm, opsional 300 mm Warna: Biru Terdiri dari: Pos. 01 Pengemasan Pos. 02 Konveyor rol untuk paket Pos. 03 Mesin frais sentral Pos. 04 Konveyor rol untuk paket Pos. 05 Unit pemisah paket Pos. 06 Konveyor lintas rantai Pos. 07 Konveyor rol pemasukan Crsdpfx Aisvi Hw Njusc Pos. 08 Press langkah Pos. 09 Unit pengumpan Pos. 10 Gergaji pemotong panjang Termasuk panel kontrol Mesin memerlukan perbaikan dan dijual dalam kondisi apa adanya. Mesin sudah dibongkar dan disimpan di Achern. Semua dokumen teknis tersedia. Untuk pertanyaan mengenai mesin dan informasi teknis, kami selalu siap membantu. Kami akan memberikan konsultasi dalam proses perbaikan dan instalasi.

Kondisi: siap digunakan (bekas), Glue application unit with 2 rollers Adhesive application - Glue application for package heights up to 300 mm 1 application roller and 1 dosing roller - 1 unit left - 1 unit right - suitable for DIMTER HK200 + HK400 + HK800 + HK1000 Codpfx Aioht Rtaeuorc Dimter spare parts Dimter accessories

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, diameter pemasangan: 50 mm, jenis arus masuk: tiga fasa, diameter alat: 50 mm, panjang alat: 330 mm, frekuensi input: 50 Hz, Alat Prasetel Alat WEINIG Opticontrol Codpfjxwnvrox Aiusrc Diameter lingkar luar: 0 - 300 mm Panjang alat: 0 - 330 mm Diameter batang: 50 mm

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), daya motor spindle: 11.000 W, kecepatan spindel (maks.): 6.000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. It is a robust pre-owned window production machine with a working width of 40-220 mm and a motor power of up to 15 kW for various processing units. The machine is equipped with advanced features such as a synchronization device, electronic height adjustment, and an automatic reversing system for efficient single-operator control. If you are looking for a high-quality profiling machine, you should consider the Weinig Unicontrol 10-5 we have for sale. Contact us for further details. • Capacity • Working width: 40-220 mm • Working height (longitudinal processing): 40-100 mm • Working height (cross processing): 40-100 mm (crossgrain height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross processing) • Motor power: 0.3 kW • Feed speed: 3-25 m/min • Workpiece clamping: 2 pressure pads • Length stop: with scale and magnifier for frame or sash outer dimensions • Counter: pneumatically indexed, 4 positions (not for studio-type windows), up to a max. wood height of 80 mm • Double-part package: single or double-part feeding, with cross separation and retention system • 1st piece (on the stop) wood width: 55-90 mm • 2nd part wood width: 130 mm • Feed (longitudinal processing) • Motor power: 2.2 kW • Feed speed: 4-18 m/min (infinitely adjustable via frequency inverter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Processing units • Cross-cut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool stroke: max. 400 mm • Axial adjustment: pneumatic, via 4-position turret • 1st spindle with tenoning and slotting • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool stroke: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero-point swing-circle: 130-140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero-point circle: 130-140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For cross-cut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of the last profiling spindle) • Radially switched: 2 positions • Axially switched: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm Crsdpfjx S Sk Esx Aiujc • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at the end of the machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool stroke: 210 mm • Tool clamping length: 160 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Optimizing crosscut saw from 2018. This WEINIG DIMTER Opticut S90 features a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for input lengths from 400 to 6,300 mm and widths from 20 to 300 mm. If you are looking for a high-quality cutting machine, the WEINIG DIMTER Opticut S90, which we offer for sale, should be considered. Contact us for further details. • Saw blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency inverter • Workpiece capacity • Input length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm Csdpeylmmmsfx Aiusrc • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible wood curvature: max. 2 mm/m or 8 mm over the full length • Table incline: 10° • Movement and accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and power • Pusher motor output: 5.1 kW • Saw motor output: 7.5 kW • Total electrical power: approx. 15 kW • Control and interface • Control unit: OptiCom Pro with 18.5" touchscreen • Screen resolution: 1366 x 768 pixels • Protection rating (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating parameters and environment • Voltage: 400 V / 50 Hz • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction port: diameter 125 mm • Required extraction capacity: velocity approx. 30 m/s; volume approx. 1,300 m³/h • Noise level (idling): ≤ 85 dBA

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, This DIMTER PROFIPRESS L2500 was manufactured in 2007. This robust used gluing press features a pressing table of approximately 2500 x 1300 mm and a stable base frame. It is equipped with a motorized multifunction pusher and an automatic gluing station with a precision glue applicator head. The press is suitable for both softwood and hardwood, ensuring uniform pressure distribution and high vertical pressure for minimal offset. Contact us for further information regarding this machine. • Workpiece capacity: • Lamella widths (for panels): 30–150 mm • Thicknesses: 11–60 mm • Input lengths: 800–2500 mm • Panel width: variable, up to max. 1300 mm • Feed width per stroke: min. 650 mm / max. 1300 mm • Max. filling area per cycle: 3.25 m² • Note: The maximum usable pressing width depends on the individual lamella widths • In multi-lane operation, filling widths can vary by max. 15 mm • Minimum contact area per press filling: ≥ 100 cm² • Press performance: • Specific pressing pressure (at 2500 x 60 mm): up to 1.6 N/mm² • Pressing table and construction: • Pressing table area: approx. 2500 x 1300 mm • Sturdy base frame with lower pressing table made of stainless steel (polished electrode) • Upper pressure plate with hydraulic "Anti-Reb" motor for high vertical pressure and low offset • Special hydraulic pressure elements ensure even pressure on the joint and compensate for tolerances • Quick-change stop rule sets for panel thicknesses 19–40 mm; hydraulically adjustable to current filling width • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Rated electrical power for the press (without options): 7 kW • Rated electrical power for 40 kW HF generator: 56 kW • Controls and safety: • Control cabinet and operator panel • Safety cover Additional equipment Crsdpfx Aiox D I Nrsuoc • Extended collecting table to 3700 x 1300 mm (with stainless steel wooden support) • Motor-driven multifunction pusher • Additional individual pressure elements from above • Automatic gluing station with precision glue applicator head • Feed system for varying widths • Camera • Washing and rinsing unit for the glue head • Modem with software for online connectivity

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Leistungsstarke Optimierkreissäge GRECON DIMTER OptiCut S75-4 mit Defekterkennung. Diese Maschine ist ideal für präzises Ablängen von Massivholz und bietet eine automatische Erkennung und Aussonderung von Materialfehlern. Technische Daten: Cedpfxoyxwyro Aiuorc Maximale Eingabelänge: 6300 mm (Schieber) Minimale Schnittlänge: 50 mm Maximale Schnittbreite: 360 x 30 mm / 240 x 160 mm Maximale Vorschubgeschwindigkeit: 60 m/min Hauptantrieb (Säge): 7,5 kW Sägeblattdurchmesser: 400 mm Baujahr: 2001 Drehstrom: 400 V / 50 Hz Steuerspannung: 230 VAC / 24 VDC Nennleistung: 11 kW Sicherungsabsicherung: 25 A Maschinenmaße: Zuführung: L 7600 x B 800 x H 1100 mm / Säge: L 1400 x B 1200 x H 1650 mm / Auslauf: L 5200 x B 600 x H 900 mm Gesamte Arbeitshöhe: 850 mm Defekterkennung: Automatische Identifizierung und Aussonderung von Holzfehlern (Astlöcher, Risse etc.) Ertragsoptimierung: Softwaregestützte Berechnung zur bestmöglichen Ausnutzung des Rohholzes. Bedienungsanleitung auf Englisch und Deutsch / Elektroschaltplan enthalten. Maschine kann im laufenden Betrieb besichtigt werden. WHATSAPP-Video auf Anfrage.