Beli Cronosstech 2550X10Mm 3 Silinder Hidrolik Atas Mesin Tekuk bekas (108.484)

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic opening top roll head Movable control panel Centrally driven rolls powered by motor Hydraulically operated rear roll and lower roll (up & down movement) Precision bending with braked main motor Cone bending and pre-bending system Upper and lower rolls driven by planetary reducer Rear roll ball system for facilitating sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator’s manual OPTIONAL EQUIPMENT Overhead crane support for large diameter rolling Hydraulic side supports for large diameter rolling Ground and polished rolls Wire grooves on shaft ends NC control unit Djdpfxow Slcgj Aiusch Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 9 mm, berat keseluruhan: 5.400 kg, STANDART EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by motor - Hydraulic up-down movement for rear and bottom rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Bottom and top rolls driven by planetary gearbox Dcsdpow Slbvefx Aiujh - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - Operating manual OPTIONAL EQUIPMENT - Top crane (elevator) for support in large diameter bending - Hydraulic side supports for support in large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 15 mm, STANDARD FEATURES * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotors and planetary gearboxes * Foldable hydraulic head for easy removal of bent parts * Easy operation with a mobile control panel * Lower rolls' positions are easily read with two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with roller bearings * Hydraulic balancing system for parallel movement of the rolls * Extended shaft ends for mounting profile and tube bending rolls Dcodpfxew Sld Ro Aiuoh OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for assisting large diameter bending * Ground and polished rolls for special applications * Roll sets for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the rolls TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 10/13 mm Bending : 13/15 mm Upper & Lower Roll : 300 mm Side Roll : 280 mm Motor Power : 11 kW Bending Speed : 5 m/min Length : 5150 mm Width : 1500 mm Height : 1550 mm Weight : 9050 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls (up/down) Precision bending with braked main motor Cone bending and pre-bending system Lower and upper rolls driven via planetary gearbox Rear roll ball system to facilitate sheet movement Compliance with EU safety directives High-strength, forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) Dcsdjw Slctspfx Aiueh Operating manual OPTIONAL EQUIPMENT Overhead crane (elevator) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejection system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with mobile control panel * Lower roll positions easily read via two digital indicators Djdpfx Aew Slf Uoiujch * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending with bearing system * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile/pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending * Hydraulic lateral supports for large diameter bending * Ground and polished rolls for special applications * Profile bending rolls * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Kondisi: bekas, Three-roll plate rolling machine, three-roll - sheet metal bending machine, bending machine, sheet metal rolling machine, 3-roll plate bending machine, section bending machine, three-roll sheet rolling machine -Spare part: upper roll -Drawing available in the images -Maximum sheet width: 2060 mm -Maximum sheet thickness: mm -Roll diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg Dedpfscx T E Rjx Aiuech

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 40 t, panjang langkah: 160 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 90 mm/dtk, kedalaman tenggorokan: 320 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB NC 40-1550 – 40 Ton NC Hydraulic Press Brake The HPB NC 40-1550 Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, has been designed for precise sheet metal bending applications with a bending force of 40 tons and a bending length of 1550 mm. Thanks to its compact design, NC-controlled axes, high-rigidity steel frame, and user-friendly control system, it offers an efficient solution for workshops, metalworking companies, and industrial manufacturers. Standard Features Stroke: 160 mm Daylight Opening: 380 mm Throat Depth: 320 mm Bending Length: 1550 mm Distance Between Columns: 1260 mm Double-cylinder top beam structure Steel frame and top beam provide high static and dynamic rigidity Adjustable fiber-slide supported top beam system Dodpfx Aszbq U Heiuoch High-strength balancing shaft and eccentric bearing system to support parallelism Motorized angle adjustment with in-cylinder mechanical stroke system Wide stroke and daylight opening for a variety of tooling Easy tonnage and bottom dead center adjustment via NC control Hydraulic safety system against overpressure Dual-speed operation (free fall, bending, fast return) Multi-functional foot pedal with emergency stop compliant with CE standards Top-mounted hydraulic power unit with HAWE or REXROTH components SIEMENS, PIZZATO, and BALLUFF electrical equipment LEUZE safety system and learning mode NC control unit with 500 programs and 200 lines per program storage USB data upload and backup capability Standard top and bottom tooling set NC-controlled motorized X-axis backgauge system 500 mm movement range 0.2 mm positioning accuracy Motorized Y-axis angle adjustment Movable control panel Front support arms with linear guides Lower die centering and fixing bolts Programmable precision return function Optional Features Motorized R-axis Special bending tools and dies Custom pedal system with dual hand + foot control DSP or FIESSLER safety systems Extended backgauge system Additional backgauge fingers Additional front support arm Manual crowning system Motorized crowning system Technical Specifications Bending Force: 40 Ton Bending Capacity*: 4 mm Working Length: 1550 mm Distance Between Columns: 1260 mm Stroke: 160 mm Bending Speed: 10 mm/s Fast Descent Speed: 90 mm/s Throat Depth: 320 mm Daylight Opening: 380 mm Table Width: 100 mm Bottom Table Height: 845 mm Main Motor Power: 5.5 kW X Axis Motor Power: 0.75 kW Y Axis Motor Power: 0.37 kW R Axis Motor Power (Optional): 0.25 kW Backgauge Distance: 600 mm Oil Tank Capacity: 120 L Machine Length: 2000 mm Machine Width: 1600 mm Machine Height: 2235 mm Machine Weight: 3450 kg This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: bekas, Tahun pembuatan: 1992, Technical details: Sheet width: 1550 mm Sheet thickness: 2.5 mm Frame opening: 1630 mm Blade length: 1550 mm Stroke adjustment, upper beam: 90 mm manual / 70 mm hydraulic Stroke adjustment, lower beam/bending beam: 105 mm manual Stroke adjustment, bending beam: 40 mm Maximum bending angle: 93° (L-/Z-bending) and 180° (folding) Back gauge: no Total power requirement: 4.5 kW Machine weight approx.: 1.8 t Machine dimensions approx. (LxWxH): 2.6 x 1.1 x 1.7 m Hydraulic unit dimensions: 1400 x 700 x 1480 mm Djdpfxou Ib Ans Aiuoch Bending capacity 2.5 mm at approx. 400 N/mm² strength Hydraulic unit OILTECH, approx. 200 liters

Kondisi: bekas, Tahun pembuatan: 1988, de-techdetails-bendingmachine Dedpfx Aiju Ib Dfsusch

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, 1 Dodpfszab Emox Aiujch

Kondisi: baru, Tahun pembuatan: 2026, jenis kontrol: Kontrol NC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, daya: 22 kW (29,91 hp), Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, CRONOSSTECH PKH 160 Profile Bending Machine The CRONOSSTECH PKH 160 model delivers maximum efficiency in heavy-duty profile bending applications thanks to its robust construction and powerful hydraulic system. With all three rolls driven, it ensures stable and precise bending without slippage. Key Advantages - All three rolls are driven by hydraulic motors - High-strength, long-lasting structure - Horizontal and vertical operation capability - Digital indicators for precise bending - Heavy-duty industrial use Areas of Application Djdey Hgwispfx Aiujch - Steel construction manufacturing - Pipe and profile bending applications - Machinery and equipment production - Shipyard and maritime industry - Automotive and related industries Standard Features - Welded steel construction body - All three rolls driven by hydraulic motors and planetary gearboxes (separate planetary gearbox for each roll) - Shafts made of specially hardened and ground high-strength material - Hardened standard rolls - Mobile control panel independent from the frame - Horizontal and vertical working positions - Dual-speed operating system - Digital indicators (2 units) - Three-way hydraulic side supports Optional Features - Special rolls, bending, and reducing attachments - NC control system Technical Specifications – PKH 160 - Roll diameter: Ø160 mm - Roll bearing diameter: Ø500 mm - Working speed: 3 – 6 m/min - Motor power: 22 kW - Machine length: 2500 mm - Machine width: 2350 mm - Machine height: 2600 mm - Weight: 10,700 kg Production Note: This machine is manufactured in Turkey by CRONOSSTECH. It is designed according to high-quality standards and is suitable for industrial use.

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter rol atas: 150 mm, diameter roll samping: 130 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 6 mm, ketebalan pelat baja (maks.): 6 mm, Perlengkapan: alat pembengkok kerucut, dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, ENGLISH_TRANSLATION_STANDARD_EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by motor - Hydraulic up-down movement of rear roll and bottom roll - Precision bending with braked main motor - Conical bending and pre-bending system - Bottom and top roll driven by planetary gearbox - Rear roll ball system for easy sheet movement - Compliance with EU safety directives Dcedpfxjxw D Ude Aiueh - High strength forged steel rolls made from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - Operating manual OPTIONAL EQUIPMENT - Top crane (elevator) for large diameter bending support - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves on shaft ends - NC control unit - Dual speed operation - Stepless speed adjustment - Extractor system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 MM Pre-Bending: 3/4 mm Bending Capacity: 4/6 mm Top & Bottom Roll: 150 MM Side Roll: 130 MM Min. Bending Diameter: 225 / 750 MM Motor Power: 2.2 + 1.1 KW Bending Speed: 6 m/min Tank Capacity: 25 L Length: 3800 MM Width: 950 MM Height: 1100 MM Weight: 2250 KG

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: listrik, jumlah rol: 3, diameter roller (bawah): 190 mm, diameter rol atas: 190 mm, lebar kerja: 2.550 mm, ketebalan lembaran (maks.): 6 mm, ketebalan pelat baja (maks.): 6 mm, daya: 4 kW (5,44 hp), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty jobs. It is particularly suitable for rolling materials up to 10 mm in thickness. Common applications include working with aluminum materials, manufacturing ventilation ducts, advertising panels, machine bodywork and sheet metal components, among many other similar tasks. All models are driven by planetary gearbox High-strength shafts made from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable upper roll Movable control panel Cone bending roll Centralized lubrication system Dedpfex D Dfvsx Aiuech Precise bending capability with braked motor and planetary gearbox Motorized rear roll with vertical up/down movement Upper roll support system Compliant with EU Safety Directives (CE Certificate) Operating manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for fitting profile and pipe bending rolls Profile and pipe bending roll set Motorized bottom roll with vertical movement Delrin-sleeved upper roll for Alucobond bending Adjustable speed in steps NC Control TECHNICAL SPECIFICATIONS Bending Length : 2550MM Pre-bending : 4/5MM Bending Capacity : 5/6MM Upper & Lower Roll Diameter : 190MM Min. Bending Diameter : 285MM Main Motor Power : 4 KW Rear Motor Power : 1.5 KW Length : 4700MM Width : 950MM Height : 1300MM Weight : 3400KG

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 550 mm, diameter rol atas: 550 mm, diameter roll samping: 450 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 70 kW (95,17 hp), masa garansi: 12 bulan, Perlengkapan: henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, en_STANDART EQUIPMENT * The lower, upper, and side rolls perform linear up-and-down movement by pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically upward-moving shaft enable easy removal of the bent workpiece * Very easy operation with a mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large-diameter bending support * Hydraulic side supports for large-diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Dcedpexbzptefx Aiujh Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Ideal for rolling round and various diameter materials Bottom and side rolls move vertically with direct hydraulic linear action Protected against overload Dcodpjw Slxzofx Aiush Top roll driven by electric motor and planetary gearbox; bottom roll driven by universal joint coupling system; two rolls powered rotation Roll positions easily read via three digital displays Hydraulically opening head for easy removal of rolled parts User-friendly with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of shafts Compliant with EU safety standards and CE certified Operator’s manual OPTIONAL EQUIPMENT Remote assistance with NC control Upper crane support for large diameter rolling Hydraulic side supports for large diameter rolling Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Ejector system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending Capacity: 8/10 mm Bending Capacity: 10/12 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 350 mm, diameter rol atas: 350 mm, diameter roll samping: 260 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 25 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Positions of the rolls can be easily read by three digital position indicators * Hydraulic drop-end and automatically upward-moving shaft ensure easy removal of the bent part * Easy operation via a movable control panel * Welded steel frame construction * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system Dcedew Smb Ropfx Aiush OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll Diameter: 350 mm Side Roll Diameter: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, daya: 8 kW (10,88 hp), PERALATAN STANDAR Dodpfsw Smi Isx Aiuech Bodi konstruksi baja las Tiga rol digerakkan oleh motor Poros yang dikeraskan dan diasah, terbuat dari bahan kekuatan tinggi khusus Posisi kerja horizontal dan vertikal Rol standar yang telah dikeraskan Papan kontrol bergerak terpisah dari bodi mesin Penahan samping mekanis manual bergerak ke 3 arah Pembengkokan presisi dengan motor rem Dua indikator digital PERALATAN OPSIONAL Rol pembengkok pipa dan profil Penahan samping hidrolik dua sumbu opsional Otomatisasi dengan kontrol NC SPESIFIKASI TEKNIS Diameter poros rol: 100 mm Diameter rol: 315 mm Kecepatan kerja: 7 m/menit Daya motor: 7,5 kW Panjang: 2000 mm Lebar: 1450 mm Tinggi: 1700 mm Berat: 3650 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 320 mm, diameter rol atas: 320 mm, diameter roll samping: 240 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, STANDARD EQUIPMENT * The lower, top, and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overload * Top roll and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Easy to read roll positions thanks to three digital displays * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system Dsdpfsxw Eblex Aiujch OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16 / 20 mm Bending: 20 / 25 mm Top & Bottom Roll Diameter: 320 mm Side Roll Diameter: 240 mm Motor Power: 20 kW Bending Speed: 1.5 - 5 m/min Length: 4350 mm Width: 1800 mm Height: 1950 mm Weight: 10,500 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 460 mm, diameter rol atas: 460 mm, diameter roll samping: 380 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 38,5 kW (52,35 hp), masa garansi: 12 bulan, STANDARD EQUIPMENT * Lower, upper, and side rolls are moved up and down by pistons hydraulically connected to the machine frame * Protected against overload Dcjdpfx Aisxd S T Ueueh * Upper and side rolls are driven by hydromotors and planetary reducers (3-roll drive system) * Positions of the rolls can be easily read with three digital displays * Easily removable bent workpiece thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with the movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC controller for automation * Top crane (elevator) for supporting large diameter bending * Hydraulic side supports for supporting large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19,800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, lebar kerja: 3.100 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, STANDARD EQUIPMENT * The lower and side rolls move up and down linearly via pistons hydraulically connected to the frame Dsdpfx Asxw Ecvoiuoch * Protected against overload * The upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * The positions of the rolls can be easily read via three digital displays * Easy part removal with a hydraulically opening head and automatically rising shaft * Very easy operation with movable control panel * Welded steel construction body * Forged or rolled SAE 1050 (CK 50) steel shafts, induction-hardened * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 16/20 mm Bending : 20/25 mm Upper & Lower Roll : 380 mm Side Roll : 300 mm Motor Power : 31.5 kW Rolling Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, cs_hu_001 Dodpfsy Sz Erjx Aiuech

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, AMADA matriks/alat bawah segmen sebagian sistem UKB 415 mm V16 R2 85° V22 R2,5 85° V35 R3 85° Dedjyqyc Sopfx Aiujch V50 R4 85° Segmen alat atas UKB sistem AMADA 415 mm, 150 mm, 35 mm, 15 mm dan tanduk kiri/kanan 100 mm R 0,8 / 85° H 66,5 Selain itu, kami menawarkan matriks 835 mm (produsen Eurostamp), identik dengan matriks UKB yang ditawarkan. Matriks ini sedikit rusak, namun sepenuhnya berfungsi dan tersedia seharga €70,00 jika berminat.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 180 t, Press force: 180 t Bending length: 3100 mm Distance between uprights: 3100 mm Control: Cybelec CybTouch 15 Stroke: 250 mm Installation height: 470 mm Rapid downward speed: 180 mm/s Bending speed: 0-10 mm/s Rapid return speed: 165 mm/s Total power requirement: 15 kW Machine weight approx.: 14,000 kg Dcodpfx Aswz Et Sjiujh Dimensions: 4255 x 2390 x 3030 mm Standard equipment: - CNC control unit Cybelec CybTouch 15 Windows - 4 + 1 axes: Y1, Y2, X, R, C - Mechanical crowning system: B-CM - Backgauge system model GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Additional equipment: - 2 x front support arms - 2 x backgauge fingers - Upper tool clamping Wila Style, hydraulic - Die clamping Wila Style, hydraulic - CE conformity

Kondisi: hampir baru (bekas), Tahun pembuatan: 1991, tegangan masuk: 200 V, gaya penekanan: 3 t, kecepatan operasi: 47 mm/dtk, lebar meja: 410 mm, panjang meja: 320 mm, kedalaman tenggorokan: 125 mm, kapasitas tangki oli: 6 l, panjang total: 735 mm, lebar total: 505 mm, tinggi total: 987 mm, ATSUGI 3 Ton Hydraulic Press for sale in like-new condition Atsugi Model AP-3-M Usable Load Range: 6-30 kN Stroke: 150 mm Operating Speed: 46.7 mm/s Acceleration Speed: 56.7 mm/s Two-hand operation Mobile workbench Specification area: Open height: 250 mm Open depth: 125 mm Dcjdpfx Aev Sd Ansiujh Table size: 410 x 320 mm Motor specification: 3-phase AC 200 V, 4-pole, 1.5 kW Two-hand operation Mobile workbench Hydraulic fluid / Capacity: 6 liters Total weight (kg): 200 Overall dimensions ​ Height (mm): 987 Width (mm): 505 Depth (mm): 735

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 3 t, Perlengkapan: penghadang cahaya keselamatan, For sale: As-new HYUNDAE CETTA HHP-3 hydraulic press "Multiple units available" Manufacturer: HYUNDAE (Korea) Model: HHP-3 Year of manufacture: 2018 Load range: 1–3 tons Dcsdpfjvbd U Aex Aiush Stroke [mm]: 150 Working height: 250 mm Safety light curtain Two-hand operation Movable worktable Hyundae press control system Ram closing speed: 178 mm/s Ram pressing speed: 54 mm/s Opening speed: 79 mm/s Table size: 450 x 360 mm Max. working pressure: 60 kg·f/m² Hydraulic motor: 1.5 kW, 3-phase/4-pole, 200 V Weight: 350 kg Machine height (without table): 1415 mm Machine length: 950 mm Machine width: approx. 700 mm Worktable with rollers or leveling screws