Beli Cronosstech 2550X18 Mm - 3 Silinder Hidrolik Atas bekas (105.591)

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 18 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic cylinders * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Easy removal of bent parts thanks to hydraulically opening head * Very easy operation with mobile control panel * Lower roll positions easily read via two digital indicators * Welded steel construction body * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts Hjdpow Slf Usfx Al Iol * Conical bending with bearing system * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile/pipe bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) support for large diameter bending * Hydraulic lateral supports for large diameter bending * Ground and polished rolls for special applications * Profile bending rolls * Stepless hydraulic speed adjustment * Electronic balancing system for parallel shaft movement TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 12/16 mm Bending: 16/18 mm Upper & Lower Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4600 mm Width: 1500 mm Height: 1550 mm Weight: 8400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 15 mm, STANDARD FEATURES * Side rolls move up and down orbitally via hydraulic pistons * Protected against overload * All rolls are driven by hydromotors and planetary gearboxes * Foldable hydraulic head for easy removal of bent parts * Easy operation with a mobile control panel * Lower rolls' positions are easily read with two digital displays * Welded steel frame construction * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with roller bearings * Hydraulic balancing system for parallel movement of the rolls * Extended shaft ends for mounting profile and tube bending rolls OPTIONAL EQUIPMENT * Overhead crane (elevator) for supporting large diameter bending * Hydraulic side supports for assisting large diameter bending * Ground and polished rolls for special applications * Roll sets for profile bending * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of the rolls TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Hodpfx Ajw Sld Rsl Iol Pre-bending : 10/13 mm Bending : 13/15 mm Upper & Lower Roll : 300 mm Side Roll : 280 mm Motor Power : 11 kW Bending Speed : 5 m/min Length : 5150 mm Width : 1500 mm Height : 1550 mm Weight : 9050 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 300 mm, diameter rol atas: 300 mm, diameter roll samping: 280 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 22 mm, STANDARD EQUIPMENT * Side rolls move up and down orbitally by means of a hydraulic piston * Protected against overloading * All rolls driven by hydromotor and planetary reducer * Folded parts can be easily removed thanks to the hydraulically opening head * Very easy operation with movable control panel * Position of lower rolls easily readable via two digital indicators * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting section and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (lift) for support in large diameter bending * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Section bending rolls for profiles * Stepless hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16/20 mm Bending: 20/22 mm Top & Bottom Roll: 300 mm Side Roll: 280 mm Motor Power: 11 kW Bending Speed: 5 m/min Length: 4100 mm Width: 1500 mm Height: 1550 mm Hjdsw Slg Sopfx Al Iel Weight: 7400 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 1.550 mm, lebar kerja: 1.550 mm, ketebalan lembaran (maks.): 15 mm, ketebalan pelat baja (maks.): 15 mm, daya: 7,5 kW (10,20 hp), masa garansi: 12 bulan, STANDARD EQUIPMENT * Side rolls move up and down orbitally with hydraulic pistons * Protected against overload * All rolls are driven by hydromotor and planetary reducer * Folded pieces can be easily removed thanks to hydraulically opening head * Easy operation with movable control panel * Lower roll positions can be easily read with two digital indicators * Welded steel construction body * Induction hardened, hot-rolled steel shafts (SAE 1050 / CK45) * Conical bending system with bearings * Hydraulic balancing system for parallel movement of shafts * Extended shaft ends for fitting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Ground and polished rolls for special applications * Rolls for profile bending Hodpfxsxbzr Uj Al Isl * Infinitely variable hydraulic speed adjustment * Electronic balancing system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length: 1550 mm Pre-Bending: 10/12 mm Bending: 12/15 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Motor Power: 7.5 kW Bending Speed: 5 m/min Length: 3500 mm Width: 1200 mm Height: 1370 mm Weight: 3600 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls (up/down) Precision bending with braked main motor Hodpfjw Slctex Al Iel Cone bending and pre-bending system Lower and upper rolls driven via planetary gearbox Rear roll ball system to facilitate sheet movement Compliance with EU safety directives High-strength, forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) Operating manual OPTIONAL EQUIPMENT Overhead crane (elevator) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejection system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 550 mm, diameter rol atas: 550 mm, diameter roll samping: 450 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 70 kW (95,17 hp), masa garansi: 12 bulan, Perlengkapan: henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, en_STANDART EQUIPMENT * The lower, upper, and side rolls perform linear up-and-down movement by pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically upward-moving shaft enable easy removal of the bent workpiece * Very easy operation with a mobile control panel Hsdpfsxbzptex Al Ijl * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large-diameter bending support * Hydraulic side supports for large-diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 350 mm, diameter rol atas: 350 mm, diameter roll samping: 260 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 25 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move up and down linearly via pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * Positions of the rolls can be easily read by three digital position indicators * Hydraulic drop-end and automatically upward-moving shaft ensure easy removal of the bent part * Easy operation via a movable control panel * Welded steel frame construction * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system Hodpfx Alew Smb Ro Isl * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll Diameter: 350 mm Side Roll Diameter: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 10 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic opening top roll head Movable control panel Centrally driven rolls powered by motor Hydraulically operated rear roll and lower roll (up & down movement) Precision bending with braked main motor Cone bending and pre-bending system Upper and lower rolls driven by planetary reducer Rear roll ball system for facilitating sheet movement Compliance with EU safety directives High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator’s manual OPTIONAL EQUIPMENT Overhead crane support for large diameter rolling Hydraulic side supports for large diameter rolling Ground and polished rolls Wire grooves on shaft ends NC control unit Dual-speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Hedpew Slcgsfx Al Iol Pre-bending: 6/8 mm Bending: 8/10 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 460 mm, diameter rol atas: 460 mm, diameter roll samping: 380 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 38,5 kW (52,35 hp), masa garansi: 12 bulan, STANDARD EQUIPMENT * Lower, upper, and side rolls are moved up and down by pistons hydraulically connected to the machine frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (3-roll drive system) * Positions of the rolls can be easily read with three digital displays * Easily removable bent workpiece thanks to a hydraulically opening head and an automatically lifting shaft Hjdpfsxd S T Uox Al Iel * Very easy operation with the movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * NC and CNC controller for automation * Top crane (elevator) for supporting large diameter bending * Hydraulic side supports for supporting large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 35 / 40 mm Bending: 40 / 50 mm Upper & Lower Roll Diameter: 460 mm Side Roll Diameter: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 2300 mm Height: 2350 mm Weight: 19,800 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, lebar kerja: 3.100 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, STANDARD EQUIPMENT * The lower and side rolls move up and down linearly via pistons hydraulically connected to the frame * Protected against overload * The upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * The positions of the rolls can be easily read via three digital displays * Easy part removal with a hydraulically opening head and automatically rising shaft * Very easy operation with movable control panel * Welded steel construction body * Forged or rolled SAE 1050 (CK 50) steel shafts, induction-hardened * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Hsdexw Ecvjpfx Al Iel Pre-bending : 16/20 mm Bending : 20/25 mm Upper & Lower Roll : 380 mm Side Roll : 300 mm Motor Power : 31.5 kW Rolling Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 3, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 9 mm, berat keseluruhan: 5.400 kg, STANDART EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by motor - Hydraulic up-down movement for rear and bottom rolls - Precision bending with braked main motor - Conical bending and pre-bending system - Bottom and top rolls driven by planetary gearbox - Rear Roll Ball System to facilitate sheet movement - Compliance with EU safety directives - High strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - Operating manual OPTIONAL EQUIPMENT - Top crane (elevator) for support in large diameter bending - Hydraulic side supports for support in large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll: 250 mm Hodpsw Slbvefx Al Ijl Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 liters Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Kondisi: bekas, Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram - Hydraulic cylinder comes from a Hitachi Seiki HC400 machining center - Piston diameter: approx. 35 mm - Piston rod diameter: 16 mm - Stroke: 370 mm - Dimensions: 44/44/H595 mm - Weight: 3.1 kg Hodpjd Al Hqofx Al Isl

Kondisi: bekas, Tie rod cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram - Hydraulic cylinder sourced from a Hitachi Seiki HC400 machining center Hodpfx Aed Al Hrel Isl - Piston diameter: approx. 35 mm - Piston rod diameter: 16 mm - Stroke: 440 mm - Dimensions: 44/44/H610 mm - Weight: 3.6 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 400 mm, diameter rol atas: 400 mm, diameter roll samping: 300 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 30 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overload * The upper and side rolls are driven by a hydromotor and planetary gearbox (all 3 rolls are motor-driven) * The positions of the rolls can be easily read with three digital indicators * Easy removal of bent parts thanks to a hydraulically opening head and an automatically lifting shaft * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed working system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Upper crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special jobs * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Hedjw Sl T Sopfx Al Iol Pre-bending: 20/25 mm Rolling: 25/30 mm Upper & Lower Roll: 400 mm Side Roll: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 5850 mm Width: 2250 mm Height: 2350 mm Weight: 20,200 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 280 mm, diameter rol atas: 280 mm, diameter roll samping: 220 mm, panjang rol: 2.550 mm, ketebalan lembaran (maks.): 16 mm, STANDARD EQUIPMENT * The bottom and side rolls perform linear up-and-down movements via pistons hydraulically connected to the frame * Protected against overload * Top and side rolls are driven by hydromotors and planetary gear reducers (all 3 rolls driven by motors) * The positions of the rolls can be easily read with three digital displays * Hydraulic opening head and automatic lifting shaft allow for easy removal of the bent workpiece * Easy operation via mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for the parallel movement of the shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operation system OPTIONAL EQUIPMENT Hjdpjw Smfcjfx Al Iel * NC and CNC control for automation * Overhead crane (elevator) for support in large diameter bending * Hydraulic side supports for support in large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 250 mm, diameter rol atas: 250 mm, diameter roll samping: 200 mm, panjang rol: 2.050 mm, ketebalan lembaran (maks.): 12 mm, STANDARD EQUIPMENT Highly suitable for bending light and medium gauge sheet, aluminum, or stainless materials Ideal for rolling round and various diameter materials Bottom and side rolls move vertically with direct hydraulic linear action Protected against overload Top roll driven by electric motor and planetary gearbox; bottom roll driven by universal joint coupling system; two rolls powered rotation Roll positions easily read via three digital displays Hydraulically opening head for easy removal of rolled parts User-friendly with mobile control panel Welded steel construction body SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Conical bending system Hydraulic balancing system for parallel movement of shafts Compliant with EU safety standards and CE certified Operator’s manual OPTIONAL EQUIPMENT Remote assistance with NC control Upper crane support for large diameter rolling Hedpfew Slxzex Al Ijl Hydraulic side supports for large diameter rolling Ground and polished rolls Dual Speed Adjustment System Stepless speed adjustment Hydraulic motor-driven rotation Ejector system TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending Capacity: 8/10 mm Bending Capacity: 10/12 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 l Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 320 mm, diameter rol atas: 320 mm, diameter roll samping: 240 mm, lebar kerja: 2.050 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol yang dikeraskan, STANDARD EQUIPMENT * The lower, top, and side rolls move up and down linearly via hydraulic pistons attached to the frame * Protected against overload * Top roll and side rolls are driven by a hydromotor and planetary gearbox (3-roll motor-driven) * Easy to read roll positions thanks to three digital displays * The hydraulically opening head and automatically lifting shaft allow easy removal of the bent workpiece * Very easy operation with a movable control panel * Welded steel construction frame * SAE 1050 (CK 50) forged or rolled steel shafts, induction-hardened * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system Hsdsxw Ebljpfx Al Isl OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel roll movement (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 16 / 20 mm Bending: 20 / 25 mm Top & Bottom Roll Diameter: 320 mm Side Roll Diameter: 240 mm Motor Power: 20 kW Bending Speed: 1.5 - 5 m/min Length: 4350 mm Width: 1800 mm Height: 1950 mm Weight: 10,500 kg

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, panjang rol: 4.100 mm, ketebalan lembaran (maks.): 16 mm, STANDARD EQUIPMENT * The lower and side rolls are moved up and down linearly by pistons hydraulically connected to the frame * Protected against overloading * The upper and side rolls are driven by hydromotors and planetary gearboxes (3-roll motor drive) * The positions of the rolls can be easily read via three digital indicators * The hydraulically opening head and automatically lifting shaft allow for easy removal of the bent workpiece * Very easy operation with the movable control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC automation controls Hjdpew Smc Iefx Al Ijl * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for support during large diameter bending * Hydraulic plate release system * Induction hardened and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 10/12 mm Bending: 12/16 mm Top & Bottom Roll Diameter: 380 mm Side Roll Diameter: 300 mm Motor Power: 31.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2250 mm Height: 2350 mm Weight: 22,000 kg

Kondisi: baik (bekas), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram - Piston diameter: 110 mm - Piston rod: Ø 60 mm - Cylinder tube outer diameter: Ø 115 mm - Stroke: 1200 mm - Total length retracted (center to center of hole): 1465 mm - Piston rod mounting: Ø 30 mm - Cylinder mounting: Ø 30 mm - Universally applicable - Quantity: 2 cylinders available - Price: per piece Hjdpfx Ajdcpi Ujl Isl - Dimensions: 1530/115/H130 mm - Weight: 62 kg/piece

Tahun pembuatan: 2009, Kondisi: baik (bekas), 0812de82 Hedpsdq U S Iefx Al Isl

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, lebar kerja: 3.100 mm, sudut pemotongan (min.): 0,5 °, sudut pemotongan (maks.): 3 °, laju langkah (min.): 13 rpm, ketebalan lembaran (maks.): 10 mm, ketebalan pelat baja (maks.): 10 mm, Standard Features • ELGO P40T Touch NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade gap, stroke, and blade angle adjustment • 1,000 mm NC controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retraction movement • Backgauge lift-up function for parts longer than 1,000 mm • Adjustable cutting length from the control panel for increased cycle rates during short cuts • Ball transfer sheet support table • 2 cutting edges on upper blade / 4 cutting edges on lower blade • Special joint system reducing maintenance requirements • 1,000 mm front support arms with ruler, T-slot, and stopper • Front and side safety guards Hsdpfx Asx Npddjl Ijl • Cutting line illumination and shadow wire • 1,000 mm openable front finger safety guard • Foot pedal • Movable control arm and safety cabinet • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with front feeding (Type 2) • Adjustable angle gauge 0-180º • Front support arms in custom lengths • Special 500 mm throat depth • Full-length openable front finger safety cover • Front finger safety light curtain • Special blades • Laser cutting line • Oil heater or cooler • Automatic or manual central lubrication • Electrical cabinet with climate control • CNC front support sheet feed arms • CE-compliant rear light barrier • Lightweight safety guards TECHNICAL SPECIFICATION VALUE Cutting Capacity (450 N/mm²) 10 mm Cutting Capacity (700 N/mm²) 6 mm Cutting Length 3100 mm Cutting Angle 0.5 – 3° Cutting Speed / High Speed Mode 7 / 13 cpm (cycles per minute) Throat Depth 250 mm Backgauge Travel (X) 1000 mm Table Length 3600 mm Table Width 880 mm Motor Power 22 kW Weight 10.5 Ton

Kondisi: baik (bekas), Technical Data for Pallet Rack Beam: Manufacturer: SLP The scope of delivery includes: 01x Pallet rack beam, used Material color: blue Beam type: RTS 90 Box profile: 90 x 50 mm Connector: 3 HK (hooks) Clear span: 2,600 mm Max. load per pair of beams: 1,800 kg with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transportation or shipping of this item is required, this will incur additional costs, which can be inquired with us depending on the delivery location and scope. Hjdpfx Alenq A R Ho Iol

Kondisi: baik (bekas), Technical Data for Pallet Rack Beam: Manufacturer: SLP Included in delivery: Hodpenq A T Nefx Al Iol 01x Pallet rack beam, used Material color: blue Beam type: RT 100 Box profile: 100 x 40 mm Bracket: 3 HK (hooks) Clear span: 2,600 mm Max. load per pair of beams: 1,350 kg, with evenly distributed load 02x Locking pins, used Design: completely galvanized For securing the beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any desired transport or shipping of this item involves additional costs, which can be requested from us separately depending on delivery location and scope.

Kondisi: bekas, Steady a 3 punti Ø 350 mm per tornio SCULFORT Altezza del centro: 550 mm Diametro massimo: Ø 350 mm Distanza tra i fissaggi a V: 350 mm Larghezza: 1200 mm Spessore: 300 mm Altezza totale: 1300 mm Hsdpexxu Spefx Al Isl Peso: circa 250 kg

Kondisi: bekas, Touches 3 points pour lunette fixe pour tour SCULFORT Hauteur de pointe : 550 mm Diamètre maximal : Ø 800 mm Dimensions de la base : L 635 x l 300 mm Entraxe de fixation en V : 480 mm Largeur : 1600 mm Épaisseur : 350 mm Hauteur totale : 1500 mm Poids : env. 250 kg Hodpfx Ajxxu U Djl Iel