Beli Donau Ersatzteile bekas (209)

Kondisi: baru, Suku cadang untuk mesin bor radial cepat Donau Donau DR Donau Danuflex Donau Danumeric Lhsdpfxsy Ri H Ij Aa Usg Donau Danusys Donauflex Donaumeric

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Dimensions and Travel Tool Holder: SK 40 Table dimensions: 4000 x 800 mm Number of T-slots: 6 T-slot spacing: 140 mm Distance, spindle lower edge (min.): 140 mm Distance, table top (max.): 740 mm Drilling radius (min.): 540 mm Drilling radius (max.): 1590 mm Travel U-axis: 2,600 mm Travel Y-axis: 1,050 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 400 mm Machining Capabilities Drilling capacity (solid material): St 60: 40 mm GG 22: 50 mm Tapping: St 60: M 36 GG 22: M 42 Lhodpfxsv If T To Aa Ueg Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm (constant from 15 – 200 rpm) Feed Drives X-Axis AC servo motor: 0.25 kW Y-Axis AC servo motor: 0.25 kW Z-Axis AC servo motor: 4.50 kW W-Axis AC servo motor: 2.50 kW U-Axis AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speeds (U/W): 7.5 / 3 m/min Infinitely variable feed rates: 5 – 2000 mm/min Feed force: 12,000 N Accuracy Positioning accuracy (X/Y axis) over 1,200 mm: ± 0.075 mm Repeatability (X/Y axis): ± 0.03 mm Positioning accuracy (Z axis): ± 0.05 mm Repeatability (Z axis): ± 0.03 mm Positioning accuracy (W axis): ± 0.05 mm Repeatability (W axis): ± 0.03 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Total connected load: 13.0 kVA CNC Control Axes: 5 (X, Y, Z, W, U), expandable Display: TFT flat screen, backlit, easily readable from all angles Position data: Cartesian or polar, absolute or incremental Units: mm or inch; angles in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on operation type, material-dependent cutting data recommendations Tool management: Max. 500 tools Sub-program technology: Yes Machining cycles: Centering, drilling, tapping, reaming, countersinking, boring, freely programmable cycle for special tools. Dwell time programmable for each cycle. Chip breaking / chip removal: Possible in drilling cycle Hole patterns: Linear, circular, matrix Basic software: Conversational programming, 38 zero point offsets, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering cast and flame-cut parts - Angle position detection of round parts by probing reference edges/faces Data interfaces: USB interface Painting (new paint) Standard 2-component structural paint Upper machine section: Light grey RAL 7035 Lower machine section: Signal blue RAL 5005 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Inspection certificate for mechanics, electrics, and safety devices

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 4.000 mm, panjang umpan sumbu Y: 1.050 mm, panjang umpan sumbu Z: 200 mm, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Dimensions and Travel Tool Holder: SK 40 Table dimensions: 4000 x 800 mm Number of T-slots: 6 T-slot spacing: 140 mm Distance, spindle lower edge (min.): 140 mm Distance, table top (max.): 740 mm Drilling radius (min.): 540 mm Drilling radius (max.): 1590 mm Travel U-axis: 2,600 mm Travel Y-axis: 1,050 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 400 mm Machining Capabilities Drilling capacity (solid material): St 60: 40 mm GG 22: 50 mm Tapping: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm (constant from 15 – 200 rpm) Feed Drives X-Axis AC servo motor: 0.25 kW Y-Axis AC servo motor: 0.25 kW Z-Axis AC servo motor: 4.50 kW W-Axis AC servo motor: 2.50 kW U-Axis AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speeds (U/W): 7.5 / 3 m/min Infinitely variable feed rates: 5 – 2000 mm/min Feed force: 12,000 N Accuracy Positioning accuracy (X/Y axis) over 1,200 mm: ± 0.075 mm Repeatability (X/Y axis): ± 0.03 mm Positioning accuracy (Z axis): ± 0.05 mm Repeatability (Z axis): ± 0.03 mm Positioning accuracy (W axis): ± 0.05 mm Repeatability (W axis): ± 0.03 mm Electrical Data Ledpoy Ttrtsfx Aa Ujhg Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Total connected load: 13.0 kVA CNC Control Axes: 5 (X, Y, Z, W, U), expandable Display: TFT flat screen, backlit, easily readable from all angles Position data: Cartesian or polar, absolute or incremental Units: mm or inch; angles in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on operation type, material-dependent cutting data recommendations Tool management: Max. 500 tools Sub-program technology: Yes Machining cycles: Centering, drilling, tapping, reaming, countersinking, boring, freely programmable cycle for special tools. Dwell time programmable for each cycle. Chip breaking / chip removal: Possible in drilling cycle Hole patterns: Linear, circular, matrix Basic software: Conversational programming, 38 zero point offsets, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering cast and flame-cut parts - Angle position detection of round parts by probing reference edges/faces Data interfaces: USB interface Painting (new paint) Standard 2-component structural paint Upper machine section: Light grey RAL 7035 Lower machine section: Signal blue RAL 5005 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Inspection certificate for mechanics, electrics, and safety devices

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, DONAU DANUMERIC 440, tahun pembuatan 1998 Data teknis: Ljdpfx Asy Txlrja Uehg - Meja 1800 x 600 mm, 4 alur-T - Jangkauan pengeboran 540 – 1590 mm - Dudukan spindel SK40 - Kecepatan putar 15 – 2800 rpm - Daya motor 5,5 kW - Berat sekitar 2.800 kg

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, gores kuas bulu: 190 mm, kecepatan spindel (min.): 41 rpm, kecepatan spindel (maks.): 1.800 rpm, berat keseluruhan: 1.920 kg, berat benda kerja (maks.): 17 kg, ketebalan pelat baja (maks.): 32 mm, torsi: 250 Nm, tinggi meja: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve the table frame) Technical Data: Drilling capacity in solid material: St 60/E335 mm Ø 32 (at feed 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Worktable height: mm 900 Quill stroke: mm 190 Column travel: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Torque at spindle: max. Nm 250 Boom ease of movement: Radial N 25 Boom ease of movement: Axial N 25 Clamping force: Radial Nm 3500 Clamping force: Axial N 5500 Feed force: N 7500 Lodpfx Aasrn Riqe Ushg Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the middle of the working surface

Kondisi: baru, Kartu Pengalih Transmisi SPS Baru sebagai pengganti lama Untuk pemasangan mandiri atau pemasangan oleh teknisi servis kami Lsdpfjy Rkkhox Aa Ujhg

Kondisi: hampir baru (bekas), Cocok untuk Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Anda Lhedpjy Ri Hnjfx Aa Uog

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), radialdrill-2018-cnc Lsdpjy Tn Ntefx Aa Ushg

Kondisi: baik (bekas), gs001 Ljdpfsy Tpq Eox Aa Ujhg

Kondisi: siap digunakan (bekas), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column stroke (W): 410 mm Arm travel: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to come by for an inspection. We can also arrange affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to view our other offers as well. Ledpjyrdc Sjfx Aa Uohg All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from the stated technical data as well as errors in the description of the item may occur and are subject to change.

Kondisi: bekas, Tahun pembuatan: 2007, Drilling capacity in steel (diameter): 40 mm Throat depth: 1050 mm Spindle speed: 15 – 2800 rpm Feed range: 0.075 – 0.45 mm/min Dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Equipment: Machine Features • Worktable 1800 x 600 mm with 4 T-slots • Arm traverse: 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) at rear of machine base • 2 T-slots (18 mm) on left of machine base • Tapping device • Central lubrication system • Coolant system • Machine light • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table min.: 70 mm / max.: 680 mm Distance spindle nose – floor min.: 970 mm / max.: 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Data Drilling capacity solid: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping: St 60: M36 Lhsdpfxey Nd T Hs Aa Usg GG 22: M42 Main Spindle Drive AC motor, frequency-controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servomotor: 0.25 kW Y-axis – AC servomotor: 0.25 kW Z-axis – AC servomotor: 4.50 kW W-axis – AC servomotor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis over 1200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) with 1800 x 600 mm table: 2800 kg CNC Control Axes: 3 (X, Y, Z) Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all angles, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental, unit: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining operation, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram technology: yes Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Any clamped rectangular parts - Any clamped round parts - Aligning cast and flame-cut parts - Angle position detection of round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Kapasitas pengeboran St 60/GG 22: 40/50 mm Pengeboran berulir St 60/GG 22: M 36/M 45 Luas meja penjepitan: 600 x 1800 mm Penyesuaian tinggi lengan: 450 mm Radius pengeboran kecil/besar: 305/1305 mm Lhodpfxjy I Ua Is Aa Uog Pemasangan spindel: SK 40 Langkah pinol: 200 mm Kecepatan spindel tanpa langkah: 15 - 2800 rpm Feed tanpa langkah: 5 - 2000 mm/menit Penggerak spindel, dikontrol frekuensi: 5,5 kW Koneksi listrik: 400 V, 14 kVA Berat: 3400 kg Kebutuhan tempat: 3800 x 2000 x 2500 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Pabrikan: KNAPP-DONAU Model: UZFM Tahun Pembuatan: 1974 Kondisi: bekas Harga & Lokasi Lokasi: Rostock, Jerman: Panjang frais: 1800 mm Lebar frais: 260 mm Modul - maks: 10 mm Dimensi meja inkl. saluran air: 460 x 2100 mm Luas penjepitan meja: 250 x 1850 mm Lebar cutter maksimum: 100 mm Feed stepless meja mesin frais: 0 - 500 mm/menit Pergerakan cepat: 3000 mm/menit Ljdoy Rgmrepfx Aa Ujhg Kepala frais dapat berputar + / - 30° Rentang kecepatan spindle frais, 9 tingkat: 29 - 178 rpm Kepala frais dapat dimiringkan kedua sisi untuk penggerindaan miring 30° Berat mesin sekitar 35 ton Persyaratan ruang sekitar 4 x 1,85 x 1,85 m Perlengkapan/aksesori: - 11 ragum - Roda gigi pengganti - Perlengkapan penjepit - Dokumentasi

Kondisi: diremajakan ulang (bekas), Perbaikan papan kecepatan putar Lhodpfx Aaey Rfzuj Usg

Kondisi: bekas, kapasitas pengeboran: 23 mm, Perlengkapan: Pelat tipe tersedia, Radial drilling machine cepat – Mesin bor berdiri Donau Werkzeugmaschinen DR23 radial drilling machine Nomor seri: 2062-4 Tegangan operasi: 380 V dengan netral, 50 Hz, 3 fase Kapasitas bor: hingga sekitar Ø 50 mm Rentang kecepatan: 58 - 1275 rpm Perangkat tapping ulir, overhang 920 mm Lampu mesin Dimensi meja plat dasar sekitar 1100x400 mm Daya motor sekitar 1,5 kW, tanpa pendingin 2 slot-T di kiri belakang Berat: sekitar 1.200 kg Inspeksi dengan daya dapat dilakukan dengan janji temu terlebih dahulu. Kesalahan pengetikan atau kekeliruan pada data teknis bisa terjadi. Harga atas permintaan Penjualan hanya di negara-negara UE. Lodpfx Aajwybqqo Ujhg

Kondisi: baru, We sell spare parts for the following milling machines: FN20, FNGJ20/30, FNGJ32, FNGJ40, FNGJ50, FNGP, FNG CNC FB3, FB4, FB5, FB6 as well as for S32 lathes. Ledpfxeufgb Ij Aa Uohg

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Likuidasi stok aksesori industri khususnya suku cadang untuk mesin perkakas, pusat pemesinan CNC Siemens 8m, 850, 840C, 840D, Motor NC Siemens Rexroth hidrolik dan teknologi pemandu Festo pneumatik, Herion pneumatik Parker hidrolik Brinkmann pompa, pompa dari berbagai produsen Heidenhain sistem pengukuran, ROD dan sistem pengukur panjang Coax katup pendingin dan sensor Balluff saklar dan sensor Phoenix Contact Römheld penjepit Gerwah kopling HSK100, HSK63 holder alat Renishaw ABB Seal O-ring, gasket Turcon Glyde Sekering Wickmann + Siemens Saklar Euchner, saklar akhir Honeywell Lhodpfx Asy Ibgzja Ujg dan masih banyak lagi... (tidak semua terlihat di gambar) meja kerja, lemari laci, rak beban berat Harga penjualan akhir dengan penawaran harga moderat: €950.000 Hanya pengambilan sendiri

Kondisi: bekas, Tahun pembuatan: 1968, Radial drill cepat Donau tipe DR 32 Kecepatan putar: 60 - 1800 rpm Jangkauan lengan: 600 mm Lodpfx Aex Hgkvoa Uehg Pelat dasar: 100 x 1400 x 110 mm Perangkat tapping ulir Sistem pendingin cairan Lampu mesin Pemegang quick-change dengan insert Ragum mesin

Kondisi: bekas, Tahun pembuatan: 1971, Milling length: 1750 mm Milling width: 260 mm Module - max.: 10 Table dimensions incl. coolant channel: 460 x 2100 mm Clamping area of the table: 250 x 1850 mm Maximum cutter width: 100 mm Feed rate of milling slide, stepless: 0 - 500 mm/min Rapid traverse: 3000 mm/min Milling head - swivelling: +/- 30° Spindle speed range, 9 steps: 29 - 178 rpm Milling head swivels on both sides for helical gearing: 30° Lhsdpfxsy Ayrrs Aa Uog Total power requirement: 4 kW Machine weight approx.: 4 t Space required approx.: 4 x 1.85 x 1.85 m Equipment/Accessories - 7 vices - Change gears - Clamping tools - Documentation

Kondisi: baru, The manufacturer Zambelli Metalltechnik GmbH & Co. KG will discontinue support for all paternosters and storage lifts as of 31 December 2023. The company will no longer provide either support or spare parts for these units. Ledjiy Dw Hopfx Aa Ushg LTG Lagertechnik Gerschütz GmbH will continue to offer spare parts, modernization kits, and support for these devices. Please feel free to contact us at any time.

Kondisi: bekas, Tahun pembuatan: 1987, Kami menawarkan mesin bor radial cepat Donau DR 40-Z bekas ini, tahun produksi 1987. Produsen: Donau Tipe: DR 40-Z Nomor seri: 1146-3 Ledpfxoy Dn E Ne Aa Ushg Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami. Lokasi mesin berada di Osterode/Harz. Mesin dapat dilihat berdasarkan perjanjian. Ini adalah mesin bekas, oleh karena itu dijual tanpa jaminan apa pun.

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm on the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Tapping device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety enclosure • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose - table surface min. mm 70 table surface max. mm 680 Distance spindle nose - floor min. mm 970 floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Data Drilling capacity (solid material): St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting: St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant torque speed range: min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Screen: TFT flat display, backlit, easily readable from all angles, 215 x 160 mm Position display: Cartesian or polar, dimensioning absolute or incremental Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining method, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Lhsdpfxoyxw Ddj Aa Usg Processing Cycles Standard software options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - centering of cast and flame cut parts - angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Kondisi: bekas, Tahun pembuatan: 1994, Radial drilling machine Donau Danuflex 145 Lsdpfxswtq Dyj Aa Ushg

Kondisi: bekas, Tahun pembuatan: 1989, bohrleistung-maschinendaten Ledsy Aa H Njpfx Aa Uohg

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of machine base • 2 T-slots 18 mm on the left of machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety device Dimensions and travel distances Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle lower edge - Table top min. mm 70 max. mm 680 Distance spindle lower edge - Floor min. mm 970 max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Machining values Drilling capacity solid St 60 ø 40 GG 22 ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 - 2800 Torque Nm max. 250 Lsdpfxjyuqmie Aa Uehg constant from rpm 15 – 2000 Feed drives X-axis AC servo motor kW 0.25 Y-axis AC servo motor kW 0.25 Z-axis AC servo motor kW 4.50 W-axis AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis at 1200 mm mm ± 0.075 Electric data Operating voltage/frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, clearly legible from all angles 215 x 160 mm Position indication: Cartesian or polar, displayed as absolute or incremental values, units: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions based on operation type, cutting data suggestions based on material Tool management: up to 500 tools Subroutine feature: yes Control cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable start options Zero point determination: Cycles for establishing zero points by manually probing the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - centering of cast and flame-cut parts - angular position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns