Beli Famad Paczków Dcfc 600 bekas (12.009)

Kondisi: bekas, Tahun pembuatan: 2016, The PDFD line consists of two primary components: the DFC 60 tenoning and profiling machine (where the ends of the slats are machined) and the PHSL longitudinal finger-jointing press, which joins elements into slats up to 6.6 meters in length with the option to program up to eight intermediate cuts, dividing the slat into sections of operator-defined length. Between these main machines, there are transport units that also perform initial tenoning. The presented line configuration allows for a productivity rate of approximately 8,500 to 10,500 linear meters per shift. The machine has undergone a complete overhaul and comes with a one-year warranty. A microprocessor-based control system enables flexible adjustment of work parameters to suit user requirements. The machine can process both ‘calzing’-type elements and components for the production of edge-glued panels (‘line-jointed’). The implementation of a receiving table with automatic feeding of slats onto the PHSL press infeed conveyor allows for operation of the line by a single operator handling material input. The receiving table is equipped with a buffer shield, which increases efficiency and smooth workflow. The line operates in an automatic cycle with manual material feeding. The line’s components can be assembled in various configurations (to be agreed with the buyer), allowing the machine to be adapted to user’s facility layout. Technical Specifications: - Maximum input package width (tenoning and profiling machine): 650 mm - Width of glued elements: 30 – 155 mm - Length of glued elements: 170 – 900 mm - Thickness of glued elements: 20 – 70 mm - Operating air pressure: 0.6 MPa - Compressed air requirement: approx. 25 m³/h - Operating efficiency: up to 4 cycles/min (6,600 mm slat) - Length of glued element: 4,500 – 6,600 mm Chjdpfx Anoc U Txkezsb - Operating voltage: 3/N/PE 400 V 50 Hz - Control voltage: 24 V DC - Power requirement: max 100 kW Operating process: Wooden slats are placed by the operator onto the cart of the first tenoning and profiling machine. Feeding the pieces initiates the machining cycle. The first machine evens up the ends of the package and then cuts the finger-joint pattern. The package then moves to the table of the second machine, where the opposite side is machined and glue is applied. Elements from the DFC-60 D tenoner are transported via a chain conveyor to the preliminary tenoning unit, where a set of rollers and a pressure device apply initial pressure to the finger-joint profile on the scantlings prior to entering the press. The pre-tenoned scantlings are conveyed onto the press table; once the target length is achieved, they are cut. Then, using a pusher bar and clamping strip, they are transferred into the press bed area for pressing. The glued and pressed, finished slat is pushed onto the press's outfeed table. While the scantlings are moved to the press bed, the process of feeding elements onto the press table is carried out simultaneously, maintaining continuous press operation for higher gluing productivity.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, HYDRAULIC SCISSOR LIFT TABLE DHP - 1.5t The DHP hydraulic scissor lift table is designed for stepless lifting and lowering of materials at assembly, loading, and machining workstations. The lift table dimensions correspond closely to EUR pallet size, allowing the operator to maintain a consistent working height during material loading or unloading. Lifting movement is achieved by two hydraulic cylinders powered by a compact electro-hydraulic power unit controlled via a pendant control. The pendant is equipped with “Lift”, “Lower”, and “EMERGENCY STOP” buttons. Maximum lifting capacity: 1500 kg Standard table dimensions: 900 x 2000 mm Cedpot Ubn Nefx Anzshb Height in collapsed position (standard): ~230 mm Maximum lift stroke: 1100 mm Lifting time: approx. 30 s Hydraulic system pressure: max 16 MPa Noise level: approx. 72 dBA Installed power: 1.1 kW Electrical supply: 3/N/PE, 400V 50Hz AC Control voltage: 24 V DC Unit weight: ~450 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, HYDRAULIC PRESS FOR EDGE GLUING OF WOODEN ELEMENTS HSKG Category: VI – Hydraulic presses for gluing wooden elements The HSKG device is designed for high-pressure gluing of wooden components cut in thickness, using hydraulic cylinders. The compression force range per cylinder is 5-11 kN (horizontal) and 25-55 kN (vertical). Gluing takes place in a stack within the loading field dimensions. The stack is formed by hydraulic pressing between movable vertical beams and vertical slats of the cross cylinders. Both stack-forming elements are equipped with wooden or metal inserts matching the profile of the slat stack. Edge-gluing of wooden elements improves frame quality, reduces machining costs, and decreases wood waste. Technical and operational data (standard HSKG – 6m version): Number of loading fields: 4 pcs Cedpstrl R Asfx Anzshb Dimensions of a single loading field: - loading height: 1,140 mm - slat length per field: 1,530 mm Maximum slat width: 150 mm Maximum length of glued elements: 3,120 mm Installed power: 3 kW Power supply: 3/N/PE, 400V 50Hz Control voltage: 24 V DC Number of cylinders per field: - Ø 50x100 – 3 pcs - Ø 80x100 – 3 pcs External dimensions (L x W x H): 8,120 x 1,000 x 2,300 mm Machine weight: 4,800 kg Upon customer request, we also manufacture alternative clamping cylinder control configurations depending on the envisaged length of the glued elements, as well as different lengths and numbers of individual working fields per press set, and a maximum working width of up to 220 mm with increased pressing force.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Window scantling glue applicator. Roller width: 250 mm. Includes dosing troughs. The applicator is equipped with a glue tank and top-mounted doser. Machine after refurbishment. Applicator rollers are new. The machine features an infeed and outfeed conveyor. Fully functional, complete, and overhauled. Chjdpfxet N H R Eo Anzjb

Kondisi: sangat baik (bekas), Nomor katalog 7268 DATA TEKNIS - ukuran hopper atas panjang/lebar: 1000x600 mm - ukuran hopper bawah panjang/lebar: 650x600 mm - lebar rotor: 570 mm - motor: 15 kW - saringan: 16x12 mm - ukuran pisau: 40x70 mm - jumlah pisau: 18 buah - auto-reverse - laci penekan - motor pompa: 0,75 kW - dimensi panjang/lebar/tinggi: 1900x1450x1450 mm - berat: 1040 kg KEUNGGULAN Chodpfx Aozxhh Dsnzjb – produk buatan Jerman – belum dicat ulang – kondisi sangat baik – mesin cacah bekas Foto asli Video pengoperasian mesin: youtube.com/watch?v=fSKMkMPlp-8 Harga netto: 29.900 PLN Harga netto: 7.120 EUR sesuai kurs 4,2 EUR (Harga dapat berubah sesuai fluktuasi nilai tukar)

Kondisi: hampir baru (bekas), panjang talang 2,7 m Chsdpfxozxzmtj Anzjb lebar talang 440 mm tinggi 1430 mm saklar pengaman

Kondisi: baik (bekas), de Chodpfx Anszvgi Uszjb

Kondisi: bekas, Welding positioner, 600 kg load capacity, electrically tiltable Immediately available Model: KT 600 / 380 V Connection: AC 380V, frequency controlled Load capacity (horizontal/vertical): 600 kg / 300 kg Chedpfx Ao Tic Ronzeb Rated center of gravity: 250 mm Rated eccentricity: 150 mm Table diameter: 1000 mm Speed: 0.1 to 1.2 rpm Rotation motor: 370 W Tilt motor: 550 W Dimensions: 1200 x 1100 x 850 mm

Kondisi: baru, KT 500 welding positioner, with 100mm through-hole Horizontal load capacity: 600 kg, tilted: 300 kg Power supply: AC 380V, 50 Hz Rotation motor: AC 400W Table diameter: 700mm Height: 700mm, Width: 800mm, Length: 800mm Weight: 155 kg Infinitely variable electric tilt range: 0 – 90° Rotation speed: 0.3 – 2.5 rpm Welding current transmission max. 500 A Includes: hand remote control, foot remote control Csdpfxscat H Nj Anzshb Optional at extra charge: Quick-release chuck Diameter: 400mm, €550 CE mark/certification

Kondisi: baik (bekas), Technical Data for the Pallet Racking System: Racking System: SSI Schäfer Model: PR 600 Installation Details: Number of Racking Aisles: 01 unit Length per Aisle: 14,040 mm Number of Bays per Aisle: 05 units Number of Levels plus Ground Level: 02 units Volume Specifications: Pallet Positions per Bay: 09 units Pallet Positions per Aisle: 45 units Total Pallet Positions: 45 units Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height including Pallet: n.d. Max. Weight per Pallet: 1,100 kg Scope of Supply: 06x Pallet Rack Uprights, used Material finish: Sendzimir galvanized Upright type: P73 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, upright protectors, and base plates Uprights are pre-assembled (bolted framework) Height: 3,600 mm Depth: 1,050 mm 20x Pallet Rack Beams, used Material color: RAL 4002 red-violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear width: 2,700 mm Bracket: 5 HK (hooks) Max. permissible load per beam pair: 3,300 kg (evenly distributed) Note: The functionality of the beams is not impaired by the holes – SSI project with heat shields, screwed on according to manufacturer specifications! 40x Safety Pins, used Material finish: Sendzimir galvanized For securing the cross beams against unintentional lifting 24x Anchor Bolts, new Manufacturer: Hilti Csdpeyapf Iefx Anzjhb Model designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shim Plates, used Design: fully galvanized For leveling uprights installed on uneven flooring 01x Load Capacity Sign Indicates bay and shelf loading capacities, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Your Contacts at our Company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about This Item: This article is available for collection only. Should transport or shipment of this item be required, additional costs will apply depending on the destination and/or scope of delivery; please inquire for a quote.

Kondisi: baik (bekas), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of racking rows: 01 unit Length per racking row: 27,990 mm Number of bays per racking row: 10 units Number of levels plus ground level: 03 units Technical data for capacity: Pallet positions per bay: 12 units Pallet positions per racking row: 120 units Total pallet positions: 120 units Basis: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack uprights, used Material finish: sendzimir galvanized Upright type: P95 Profile dimensions: 90 x 75 x 2.5 mm Incl. horizontal and diagonal bracing, upright guards and base plates Uprights are pre-assembled (bolted truss construction) Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear width: 2,700 mm Connector: 5 HK (hooks) Max. load per beam pair 3,300 kg, with evenly distributed load Note: Operational performance of the beams is maintained despite the holes (SSI project with heat protection plates bolted in place as per manufacturer's specifications!) 120x safety pins, used Material finish: sendzimir galvanized For securing the longitudinal beams against accidental lifting 44x wedge anchors, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Material: carbon steel, galvanized Approved for: cracked concrete 44x shims, used Finish: complete galvanized For leveling racking uprights on uneven floors 01x load sign With field and compartment load details, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Csdpfoyay D Iox Anzshb This item is only offered for collection. Any further requested transport or shipment of this item will incur additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Tahun pembuatan: 2018, Kondisi: baru, Here are your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a new column protector from the manufacturer Mecalux for purchase here. Chjdpfx Anod Rxyrezob The column protector is suitable for frame profile widths up to a maximum of 120 mm. Scope of delivery includes: 01x Column protector, new Material colour: orange For upright profile width: approx. 120 mm Overall height: approx. 600 mm Overall width: approx. 132 mm Internal width: approx. 126 mm Total depth: approx. 70 mm Deflector: approx. 55 mm Material thickness: approx. 3 mm Hole dimensions: approx. 9 x 14 mm Hole spacing (centre-to-centre): approx. 400 mm Weight per unit: approx. 4.298 kg 04x Hexagon bolt: M8 x 25 mm 04x Locking nut: M8 04x Washer: M8 Our services at a glance: (prices on request) Assembly and installation Our general assembly terms and conditions apply. Racking inspection Inspection according to DIN EN 15635, carried out as per requirements of BGR 234 visual checks for all racking systems. Delivery with our own fleet (unloading not included)

Kondisi: baik (bekas), Technical data for the pallet pull-out: Racking system: SSI Schäfer Type: PR 600 Scope of delivery includes: Cedpfoww Im Hjx Anzshb 01x pallet pull-out, used for rack depth: 800 mm Material color: blue Overall depth: approx. 810 mm Overall width: approx. 1,295 mm Height: approx. 265 mm Full extension: 100% = 740 mm Weight per unit: approx. 100 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipment is required, additional charges will apply, which can be requested based on the delivery location and scope.

Kondisi: baik (bekas), en-GB:Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR 600 Technical Data for Installation: Number of Racking Rows: 1 unit Length per Racking Row: 22,500 mm Number of Bays per Racking Row: 8 units Number of Levels plus Ground Level: 2 units Technical Data for Volume: Pallet Positions per Bay: 9 units Pallet Positions per Racking Row: 72 units Total Pallet Positions: 72 units Chedpeyaxmhefx Anzsb Based on the following: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n.d. Max. Weight per Pallet: 1,100 kg Items Included in Delivery: 09x Pallet Rack Uprights, used Material finish: Sendzimir galvanized Upright type: P113 Profile dimensions: 100 x 100 x 2 mm Including cross and diagonal bracing, upright protectors, and base plates The uprights are pre-assembled (bolted truss) Height: 4,000 mm Depth: 1,100 mm 32x Pallet Rack Beams, used Material colour: RAL 4002 Red Violet Box section: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg with uniformly distributed load Note: The beams' functionality is ensured despite the holes. SSI project with heat deflector plates, bolted as per manufacturer's instructions! 64x Safety Pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 36x Anchor Bolts, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Specification: Carbon steel, galvanized Approved for: cracked concrete 18x Shims, used Specification: fully galvanized For levelling rack uprights installed on uneven floors 01x Load Sign With details of bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about this Item: This item is only available for collection. Any transport or shipping beyond this is subject to additional costs, which can be provided separately depending on delivery location and scope upon request.

Kondisi: sangat baik (bekas), Included in the scope of delivery: 02x Workbench Stands, used Material color: Sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (bolted truss construction) 04x Workbench Beams, used Material color: RAL 7035 light grey Box profile: 80 x 40 mm Type: TRV1-240-084-30CE Clear span: 2,400 mm 08x Safety Pins, new Design: fully galvanized 01x Chipboard Panel, 2nd choice, used Thickness: 38 mm Width: 2,580 mm Depth: 600 mm Surface: possibly coated (may be two-piece) 01x Chipboard Panel, 2nd choice, used Thickness: 38 mm Width: 2,380 mm Depth: 600 mm Surface: possibly coated (may be two-piece) 16x Self-drilling Screws, new Finish: galvanized Dimensions: 6.3 x 70 mm Chodpfxsi Ewqke Anzob The photos are for illustrative purposes only. Colors may vary. The chipboard panels may be supplied coated or uncoated. - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - Standard production time is approx. 5 working days.

Kondisi: baik (bekas), Here are your contacts in our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are pleased to offer you a used column guard manufactured by Gemac for purchase. The column guard is suitable for a frame profile width of up to 90 mm. Scope of delivery includes: 01x Column Guard, used Material color: cream white Design: V-shape For upright profile width: approx. 90 mm Total height: approx. 600 mm Total width: approx. 113 mm Deflector height: approx. 60 mm Material thickness: approx. 4 mm Hole diameter: approx. 8 mm Leg dimensions: approx. 85 x 85 mm Weight per piece: approx. 4.888 kg 02x Mounting Plates, used Material color: cream white Dimensions: 130 x 91 mm (W x D) Material thickness: approx. 7 mm 04x Hexagon bolts: M10 x 35 mm 04x Serrated nuts: M10 04x Washers: M10 Our services at a glance: (Prices upon request) Chedpjfdqkajfx Anzob Assembly, installation Please note our general assembly conditions Racking inspection Racking inspections according to DIN EN 15635, performed in compliance with BGR 234 visual inspection requirements for all racking systems Delivery with our own fleet (unloading not included)

Kondisi: baik (bekas), bentang bebas: 2.700 mm, kapasitas angkut: 3.000 kg, Technical data for the pallet racking system: Racking System: SSI Schäfer Type: PR 600 Configuration Data: Number of rack rows: 1 unit Length per rack row: 16,900 mm Number of bays per rack row: 6 units at 2,700 mm each Chodpfx Anox Ebrpozsb Number of levels (plus floor level): 5 units Volume Specifications: Pallet spaces per bay: 18 units Pallet spaces per rack row: 108 units Total pallet spaces: 108 units Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Max. weight per pallet: 1,000 kg Scope of delivery includes: 07x pallet rack uprights, used Material finish: sendzimir galvanized Upright type: P113 Profile dimensions: 100 x 100 x 2 mm Including horizontal and diagonal bracing, upright protectors and base plates Uprights are pre-assembled (bolted lattice structure) Height: 8,000 mm Depth: 1,100 mm 60x pallet rack beams, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 hook claws Max. load per pair of beams: 3,000 kg, with evenly distributed load Note: The functionality of the beams is maintained despite holes resulting from the SSI project with heat deflector plates, as fastened according to the manufacturer’s instructions! 120x locking pins, used Material finish: sendzimir galvanized For securing the beams against unintentional removal 28x wedge anchors, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Design: carbon steel, galvanized Approved for: cracked concrete 14x leveling plates, used Design: fully galvanized For leveling rack uprights set up on uneven floors 01x load sign Indicating bay and shelf loads, manufacturer, and project number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transportation or shipment beyond this is subject to additional charges, which can be requested from us separately depending on the place of delivery or scope of delivery.

Kondisi: baik (bekas), Technical Data for Pallet Racking System: Racking System: SSI Schäfer Type: PR600 Technical Data for Installation: Number of Racking Rows: 01 unit Length per Row: approx. 25,500 mm Number of Bays per Row: 09 units at 2,700 mm each Number of Levels plus Ground Level: 02 units Technical Data on Capacity: Pallet Positions per Bay: 06 units Pallet Positions per Row: 54 units Total Pallet Positions: 54 units Based on: Load Carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total Height incl. Pallet: n/a Maximum Weight per Pallet: 500 kg Scope of delivery includes: 10x Pallet Racking Frames, used Material Finish: sendzimir galvanized Frame Type: P215 Profile Dimensions: 120 x 100 x 2.50 mm Incl. horizontal and diagonal struts, Base plates The frames are pre-assembled (bolted latticework) Cjdpfxezb U S Ae Anzshb 2,500 mm high 1,100 mm deep 36x Pallet Racking Beams, used Material Finish: yellow Box profile: 80 x 50 mm Beam Type: TRV1-270-085-30 CE Clear Width: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 1,500 kg, with evenly distributed load 72x Safety Pins, used Material Finish: sendzimir galvanized For securing the longitudinal beams against unintentional lifting 40x Anchor Bolts, new Manufacturer: Hilti Model: HST2 V3 M12x105 5-25 Version: carbon steel, galvanized Approved for: cracked concrete 20x Shim Plates, used Version: completely galvanized To level the racking frames placed on uneven floors 01x Load Sign with indication of bay and shelf loads, manufacturer, and order number Size: 420 x 297 x 3 mm Your contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for pickup only. If additional transport or shipping is required, extra costs will apply. These can be provided on request, depending on the delivery location and scope.

Kondisi: baik (bekas), Schneider Senator PL1 Q-600-H Pengangkat Tumpukan Kertas Mesin ini dalam kondisi sempurna, praktis baru. Penggerak hidrolik, unit hidrolik mutakhir. Daya: 400V. Siklus angkat otomatis dan manual, operasi cepat. Kapasitas beban: 600 kg. Cjdpfx Ajztz D Ionzehb Dimensi palet/lembar: 760 x 1090 mm.

Kondisi: sangat baik (bekas), Nomor katalog 7721 DATA TEKNIS - Lebar kerja: 1300 mm - Tinggi maksimum pass-through: 60 mm - Rol karet: 2 pcs - Diameter rol karet: 190 mm - Motor sekitar 1,1 kW - Dimensi (P/L/T): 2020x770x1260 mm - Berat: 500 kg KEUNGGULAN – mesin pengaplikasi lem bekas – kondisi sangat baik Codjzrlraopfx Anzjhb Harga netto: 14.900 PLN Harga netto: 3.540 EUR berdasarkan kurs 4,2 EUR (Harga dapat berubah sesuai fluktuasi yang signifikan)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Lini produksi untuk penyambungan profil PDFD dalam versi dengan satu mesin frais terdiri dari dua unit utama: mesin frais-pemotong ujung DFC 60M (tempat pemrosesan ujung profil dilakukan) dan mesin penekan untuk penyambungan memanjang PHSL, tempat elemen-elemen disambungkan menjadi profil dengan panjang hingga 6,6 meter. Lebar paket input mesin frais-pemotong ujung – 650 mm Lebar elemen yang direkatkan – 30 ÷ 155 mm Codpfx Aew Hrm Nsnzjhb Panjang elemen yang direkatkan – 170 ÷ 900 mm Ketebalan elemen yang direkatkan – 20 ÷ 70 mm Kebutuhan udara bertekanan 18 m³/jam Kapasitas kerja siklus/menit sekitar 2 (profil 6600) Panjang elemen yang direkatkan hingga 5500 mm Mesin dalam kondisi teknis yang sangat baik!!

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, panjang total: 8.120 mm, tinggi total: 2.300 mm, Press hidrolik vertikal FAMAD HSKG 6m – Jumlah area pemuatan: 3 Dimensi satu area pemuatan – Tinggi pemuatan: 1140 mm – Panjang bilah pada satu area: 1530 mm – Lebar maksimum bilah: 150 mm Codpfx Anjyuylnjzehb – Panjang maksimum elemen yang direkatkan: 3120 mm – Daya terpasang: 3 kW – Jumlah silinder per area: - 3 buah 50x100 mm - 3 buah 80x100 mm – Dimensi eksternal (p x l x t): 8120 x 1000 x 2300 mm – Berat mesin: 4800 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Alle unsere Produkte werden mit Sorgfalt hergestellt und sind mit einer 1-Jahres-Garantie abgedeckt! *Montage und Bedienerschulung KOSTENLOS* Cjdsy H Aizepfx Anzshb • Modell: FABO HY-600 • Typ: Doppelwendel-Schneckenwäscher • Kapazität: 60 Tonnen pro Stunde • Abmessungen: 1400 x 6650 x 1800 mm • Schneckengröße: Ø 600 x 6000 mm • Drehzahl: 22 U/min • Motor: 2 x 5,5 kW Schwerlast-Gamak • Wasserverbrauch: 55–205 m³ • Inklusive Fahrgestell, Motor und Schutzabdeckungen. FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE UNS GERNE!

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 32.615 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R7S017, lubang spindel: 65 mm, kecepatan spindel (maks.): 5.000 rpm, jenis arus masuk: tiga fasa, Colchester Tornado T8MSY, Pusat Pemesinan CNC HARGA TOTAL: £15.000 + PPN Produsen: Colchester / 600 Lathes Model: Tornado T8MSY Tahun Pembuatan: 2006 Kontrol: Kontrol CNC FANUC 18i-TB Nomor Seri: R7S017 Lokasi: Dynomec, Castleford, West Yorkshire Kapasitas Batang Maksimum: Diameter 65mm Ikhtisar & Spesifikasi Mesin • Konfigurasi: Pusat Pemesinan CNC dengan Alat Pemotong yang Diputar/Aktif, Spindel Tambahan, dan Sumbu Y • Kecepatan Spindel Maksimum: 5.000 RPM • Persyaratan Kelistrikan: 415V / 3 Fase / 50 Hz / 53 Amper • Jam Pengoperasian: ~32.615 Jam (lihat gambar layar kontrol untuk rincian yang tepat) • Jam Pemotongan: ~7.781 Jam (lihat gambar layar kontrol untuk rincian yang tepat) • Total Jumlah Komponen: 307.051 (seperti yang ditampilkan di layar kontrol) CATATAN TENTANG JAM PENGOPERASIAN & JUMLAH KOMPONEN MESIN: Pembacaan pada layar yang ditampilkan diambil sebelum daftar dibuat. Mesin dioperasikan selama beberapa hari setelah foto diambil, jadi jam pengoperasian, jam pemotongan, dan total jumlah komponen saat ini akan sedikit lebih tinggi dari yang ditampilkan. Paket yang Termasuk • Penyalur Batang: Tornado MBF1000T, Penyalur Batang dengan Majalah Pendek 1 Meter • Pegang Alat: Berbagai macam pegang alat VDI statis dan aktif (seperti yang ditampilkan dalam foto) • Collet: Berbagai macam collet termasuk • Rahang: Berbagai macam rahang chuck termasuk Codpfszr Ngnjx Anzjhb CATATAN PENTING TENTANG ALAT: Penjualan hanya mencakup pegang alat. Setiap sisipan pemotong, mata bor, frais, atau batang pembesaran yang ditampilkan terpasang di dalam pegang alat ditampilkan untuk keperluan demonstrasi dan tidak termasuk dalam penjualan. Ketentuan Pembayaran, Pengambilan, & Transportasi • Dana yang Telah Masuk: Mesin tidak akan diserahkan, dimuat, atau dibongkar sampai pembayaran penuh telah masuk ke rekening kami. • Transportasi & Perakitan: Pembeli sepenuhnya bertanggung jawab atas semua perakitan mesin, peralatan pengangkatan, transportasi, dan logistik pemuatan. • Jangka Waktu Pengambilan: Mesin harus diambil dan dipindahkan dari lokasi dalam waktu 14 hari (2 minggu) setelah pembelian. Ketentuan Tambahan & Pemeriksaan • Harga & PPN: Harga sudah termasuk PPN. Faktur PPN lengkap akan diberikan. • Kebijakan Pengembalian: Pengembalian tidak diterima. Dijual apa adanya. • Pemeriksaan: Pemeriksaan dengan mesin dalam kondisi menyala di lokasi di Dynomec Ltd, West Yorkshire, sangat disarankan sebelum memutuskan untuk membeli sehingga pembeli dapat sepenuhnya memeriksa dan memastikan kondisi mesin. Pemeriksaan hanya dilakukan dengan perjanjian sebelumnya. • Garansi: Dijual tanpa garansi tersirat atau diberikan. • Ketersediaan: Barang ini juga terdaftar di tempat lain; kami berhak untuk menghapus daftar ini kapan saja. Kontak: Untuk informasi lebih lanjut, silakan hubungi kami secara langsung. Faktur PPN dapat diberikan bersama dengan mesin.

Kondisi: sangat baik (bekas), Beragam holder/pemegang alat SK50/alat (sekitar 600 buah). Kondisi barang: Csdpoy U Ithofx Anzehb Kondisi bekas yang baik.