Beli Finiture Mesin Penyemprot Jendela bekas (77.742)

Kondisi: bekas, Tahun pembuatan: 2011, Länge 5000 mm Breite 100 mm Höhe 2800 mm Baujahr 2011 Range+Heine paint finishing line For the coating of individual wood window parts and frames Being sold on behalf of a customer Technical Manufacturer Description: Part dimensions: Length: 5,000 mm Height: 2,800 mm Width: max. 100 mm Coating system: Designed for use with coatings from the respective manufacturer with a low solvent content (VOC value), water-based and non-flammable. Capacity: min. 40 rails/shift, i.e. approx. 60 window units/shift (without forced drying) Process (one cycle is run through twice): - Flooding - Drying - Inspection, sealant application - Spraying - Drying Pos 1 Conveyor Technology 1 Power + Free circular conveyor Layout as per drawing 11-138-010a Essentially consisting of: 3 drives with geared motors for main chains with frequency-controlled speed (see layout). Various track rails, horizontal bends, chain tensioning stations, pneumatically/electrically controlled stop stations 50 rails, 5,000 mm long (max. load 250 kg) Automatic tilting of rails for drainage after the flooding unit 1 conveyor control system (Siemens S7-300 PLC) Programmable buffer stock Continuously variable drive units 1 lifting/lowering station for loading/unloading of workpieces (max. stroke 2,000 mm) 1 steelwork set for fastening the conveyor system Pos 2 Flooding Unit 1 flowcomat II-P 1 unit for clear priming Maximum workpiece width: approx. 180 mm Consisting of: 1 coating tunnel, 1 Flowcodrive swivel mechanism, 2 flooding lances, each equipped with max. 3 nozzles 1 cleaning accessories set 1 externally mounted stainless steel sieve 1 paint supply 1 control system Pos 3 Additions to Flooding Unit 1 drain channel and surface in the flash-off area behind the flooding unit After flooding, the rails move into a drip buffer. The dripping coating material is collected on the PP non-stick collection surface (and channel) and returned to the flooding unit. Rinse water is collected in the flooding unit and pumped out. The use of PP in paint-contact areas allows for easy cleaning of dried-on coatings. 1 humidification unit 1 control unit for the humidifier, complete with controller for humidification volume 1 hygrostat for detecting ambient humidity and activating humidification nozzles 3 humidification nozzles for the drip buffer 1 coagulation unit 1 R+H WACO 200 coagulator – 200 l collection tank Pos 4 Top Coat Spray Booths 2 spray booths for top coat application 2 extraction walls with sandwich panel cladding as per work area Fan: 16,000 m³/h Filter area: -3 sets of Ecola pre-separators -1 set Paintstop filters Gedpfx Ajy Ty E Hea Dsud -1 set bag filters Recirculating air distribution ceiling in tension frame design Volume: 12,000 m³/h approx. 75% recirculating air – 25% exhaust air operation (extracted from the production hall) Installed on site-specific foundation as per layout 2 Prolac overspray recovery columns Pos 5 Additions to Top Coat Spray Booths 3 humidification nozzles for the flash-off area after top coating

Kondisi: baru, Finiture lini pengecatan untuk jendela dan pintu ----- Deskripsi singkat: Pos. 1: 1x konveyor gantung rel ganda Pos. 2: 1x unit putar untuk traves dengan satu kopling Pos. 3: 1x "Superjet" sistem pencelupan Pos. 4: 1x humidifier bertekanan tinggi Pos. 5: 1x instalasi pemisah air limbah Gujdpjy D A Hhefx Aa Ded Opsional: Kanal pencelupan atau bak celup (5-6 bak) Deskripsi teknis lengkap dan tata letak, lihat lampiran PDF! ----- Harga lini pengecatan di atas tersedia atas permintaan! ----- (data teknis sesuai produsen - tanpa jaminan!) Semua harga tidak termasuk pajak. PPn berlaku sesuai hukum.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.100 kg, lebar benda kerja (maks.): 230 mm, tinggi benda kerja (maks.): 320 mm, Tanpa harga minimum - penjualan dijamin kepada penawar tertinggi! Instalasi hanya digunakan untuk tujuan demonstrasi dan pengujian, sehingga dalam kondisi sangat baik. DETAIL TEKNIS Jumlah satelit (tempat penyangga): 6 Jumlah nosel semprot: 6 Tinggi benda kerja maks.: 320 mm Lebar benda kerja maks.: 230 mm Gerakan: Gerak putar satelit, gerakan naik/turun horizontal Gedpfjzh Nggex Aa Doud Pengaturan: Pengaturan jumlah langkah, kecepatan, dan tinggi gerakan naik/turun DETAIL MESIN Kontrol: SPS-Siemens Berat total: 1.100 kg PERLENGKAPAN Sensor pengaman cahaya

Tahun pembuatan: 2020, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C116353, Perlengkapan: Penandaan CE, Siap Digunakan Kembali Setelah Direkondisi! Kode Ref: 1014 Emmegi Classic Magic Mesin pemotong ganda elektronik Mesin gergaji dengan dua kepala untuk profil aluminium dan PVC, dengan motor DC yang dikendalikan NC untuk menggerakkan pergerakan kepala yang otomatis. Semua sudut dapat diatur secara pneumatis hingga 22°30’ (sudut luar). Fitur Utama Godpfjy U Tczsx Aa Doud Mata pisau: Mata pisau karbida semen Ø 450 / 500 mm Panjang pemotongan: 5 m (panjang pemotongan yang efektif) Rentang sudut: 90° hingga 22°30’ (sudut luar, kemiringan pneumatik) Penentuan posisi: Sistem pengukuran langsung dengan strip magnetik Kontrol: Tampilan fluoresen alfanumerik (2 × 40 karakter) Memori: 99 nilai korektif profil (perhitungan sudut otomatis) 20 daftar pemotongan (masing-masing 50 baris) melalui keyboard 10 daftar pemotongan (masing-masing 100 baris) melalui USB (PC) Konektivitas: Port USB, kartu jaringan RJ45; siap untuk printer label Penjepit: Penjepit pneumatik horizontal/vertikal dengan perangkat tekanan rendah Keamanan: Pelindung penuh pneumatik untuk area pemotongan Pelumasan: Semprotan kabut air (emulsi oli atau oli dalam jumlah minimal) Spesifikasi Teknis Motor: 2 × 2,2 kW (400 V); total 5,3 kW Kecepatan mata pisau: 2.800 rpm Tekanan operasi: 6–8 bar; konsumsi udara 15 NL/siklus Dimensi (versi 5 m): 9.400 × 1.080 × 1.840 mm (P×L×T) Berat: Sekitar 1.500 kg Aplikasi Pemotongan presisi tinggi profil aluminium / PVC untuk jendela, pintu, dinding tirai, dan pemrosesan paduan ringan.

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C111707, Siap Digunakan Kembali untuk Produksi! Nomor Referensi: 1026 Emmegi Comet T5 Pusat kerja CNC dengan 3 sumbu yang dikendalikan, digunakan untuk memproses batang atau aluminium, PVC, paduan ringan secara umum, dan potongan baja. Mesin ini memiliki dua metode operasi: hanya satu area kerja untuk batang hingga panjang 7,7 m atau dua area kerja independen dengan pemuatan/pengosongan potongan saat mesin sedang bekerja. Mesin ini memiliki tempat penyimpanan alat sebanyak 8 unit pada poros X, yang mampu menampung 2 unit sudut dan satu cakram frais, untuk melakukan pekerjaan pada 5 sisi potongan. Mesin ini juga memiliki permukaan kerja yang dapat dipindahkan, yang memudahkan operasi pemuatan/pengosongan potongan dan secara signifikan meningkatkan luas permukaan kerja. Gusdpfx Aajzlat So Dod

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MZBF04, Perlengkapan: Penandaan CE, Mesin pengisian cairan ini adalah mesin profesional terintegrasi untuk pengisian, penutupan, dan penyegelan vial, botol infus kaca, atau botol serupa. Mesin ini dikembangkan oleh perusahaan kami berdasarkan pengenalan dan adopsi teknologi asing yang maju. Mesin ini dapat melakukan beberapa tindakan secara simultan, termasuk menata botol, pengisian kuantitatif, pemasangan sumbat (dengan Butyl Rubber Stopper), penutupan, dan penyegelan. Guodpfxjxunh Nj Aa Dod

Kondisi: bekas, Tahun pembuatan: 2020, Maximum workpiece length: 3740 mm Milling spindle: 1 unit Main motor: 15 kW Control system: CNC Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of client ----- - From a timber window manufacturing operation. - Machine still connected and ready for demonstration - Sold without machining tools Technical Description (Summary, see PDF for full details): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depends on clamping system, see layout. Travel distances: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speeds: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 – 24,000 rpm - Additional locking system for the C-axis - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in X direction, 5 spindles in Y direction, grooving saw in X direction) Horizontal drilling unit with 6 spindles, 4 spindles in X direction and 2 spindles in Y direction. 1 grooving saw in X direction, max. diameter 120 mm - Disc tool changer with 24 tool positions on the right of the machine frame Max. tool diameter 240 mm Max. tool height 370 mm - Tool change station for circular saw blade mounted on the cantilever/tool changer, Max. saw blade diameter 350 mm - Tool changer on the left of the machine frame with 10 tool positions. Max. tool diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - Disc tool changer with 24 tool positions mounted on the cantilever, travelling in the X direction Max. tool diameter 240 mm Max. tool height 370 mm - Moving pick-up position for chip deflector - 6 workpiece supports, s-motion, position controlled - 2 machining fields for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved element machining - Includes all existing solid wood clamps and vacuum suction pads - Automatic central lubrication - CE safety equipment - “WoodFLash” software Lamello Clamex P Macro Cut-out Macro - “Greenline package” for reduced energy consumption ----- Price for the above machine on request! ----- Optional new Oppold tool set for H500: Gsdjyq Sztopfx Aa Dsud -Windows Timber windows IV 68, 78, and 88 inward-opening, with changeable rebate at the sides and top. Glass rebate 20 mm, frame and sash side 20° beveled with loose and pre-machined glazing bead Old building timber windows IV 68, 78, and 88 inward-opening, without rain rail, with changeable rebate at the sides, top, and bottom. Glass rebate 20 mm, frame & sash side 15° beveled Removable weather board Timber-aluminium window (System supplier: Gutmann Mira, bevel rebate system) HA IV 68, 78, and 88, inward-opening, 2 sash variants: square and bevelled, Changeable rebate at the bottom, sides, and top -Entrance door Timber HTIV 68, 78, and 88 with single rebate in the frame and double rebate in the sash inward-opening, 1 sash variant, glass rebate, without changeable rebate Offset construction Timber-aluminium IV 68, 78, and 88 with single rebate in the frame and double rebate in the sash -Lift and slide door Timber HS IV 68, 78, and 88, without frame production Timber-aluminium HS IV 68, 78, and 88, without frame production Execution...

Kondisi: baru, de-hu-it-lt Gsdpfeyrtyyox Aa Deud

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: A 07-01-003, Data Teknis: - Produsen: Venjakob - Tipe: VEN SPRAY Comfort - Retrofit 2026 (Tahun Pembuatan 2007) Gujdpfx Aaozia Nuo Ded - Lebar kerja: 1.300 mm - Sisi pengoperasian: kanan - Harga untuk mesin yang telah direkondisi - Kondisi saat ini, belum diperbaiki - Penggerak pistol semprot model Duo - Ekstraksi kering - Kapasitas udara buangan: 7.000m³/jam - Diameter saluran ekstraksi: 500 mm - Sistem transportasi sabuk - Kecepatan maju sekitar 3 - 7 m/menit - Dengan sistem pembersihan sabuk - Dengan sistem pemulihan cat melalui V-Band - Deteksi bagian otomatis dengan tirai cahaya - Kontrol pistol semprot dengan layar sentuh - Sirkuit warna terpasang: 1 buah - 4 unit alat semprot airless, Krautzberger KAA1300 - 1 unit pompa HD-Airless - Plafon filter udara masuk - Cocok untuk cat berbahan dasar air - Cocok untuk cat berbasis pelarut - Panel kontrol listrik terintegrasi di dalam mesin - Total daya terpasang sekitar 23 kW - Panjang: - Lebar: 3.690 mm - Tinggi: 2.520 mm (2.360 + 440 mm) - Voltase, frekuensi: 400 V / 50 Hz - Warna: Abu-abu muda 7035 + hitam - Lokasi: tidak tersedia di stok, tersedia mulai Agustus 2026 - Fluktuasi tegangan maks. +/- 5 % Beberapa gambar merupakan contoh mesin semprot yang telah direkondisi dengan tipe yang sama. _____ Sebagai opsi tambahan, kami dapat memberikan penawaran untuk pemasangan dan pengoperasian mesin, serta pelatihan karyawan. Atas permintaan, kami juga menyediakan layanan perawatan dan pemeliharaan rutin mesin. Untuk informasi lebih lanjut, silakan hubungi kami!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), frekuensi input: 50 Hz, Tersertifikasi DGUV hingga: 08/2027, Perangkat Spritzkuchen Putih Elektrik Gusdpfey H Ur Uex Aa Ded Mesin Spritzkuchen dengan tenaga listrik Model: ESFG dengan dudukan dinding diperiksa sesuai DGUV V3 pengaturan tanpa langkah Koneksi 230V, siap pakai Mesin bekas Opsi: Bola keju quark Spritzkuchen Donat cincin

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: A1711012, Pos. 1 VEN CLEAN Smart Dust Removal System Compressed air dust removal system for cleaning workpieces prior to painting, specifically designed for removing dust from profiled workpiece surfaces. Five rotating air nozzles/blower stars are installed, which remove dust from the surface. The detached dust is extracted from both sides via suction ducts. An external extraction system is required on-site. Technical Data: - Roller conveyor length: 2,060 mm - Roller spacing: 85 mm - Working width: 1,300 mm Guedpfjvv Hryex Aa Ded - Total width: 1,800 mm - Drive power: 0.25 kW - Exhaust air volume: 4,000 m³/h (to be provided by customer) - Compressed air consumption: 980 Nl/min - Ionization as a nozzle bar, non-EX, with compressed air nozzles - Compressed air consumption for ionization: 840 Nl/min Pos. 2 VEN SPRAY Comfort Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY Comfort CNC 7000 - Year of manufacture: 2017 - Working height: approx. 930 mm ±20 mm - Working width: 1,300 mm - Operator side: left - Price for refurbished machine - Current condition: machine unrefurbished - Dual gun drive system - Dry extraction system - Extraction socket diameter: 500 mm - Exhaust capacity: 7,000 m³/h - Conveyor belt transport system - Feed speed infinitely adjustable ~ 2–6 m/min - With belt cleaning system featuring tungsten carbide scraper - Gun control, Touch Screen CNC7000 - Installed paint circuits: 1 unit (further options available) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Free-standing control cabinet - Voltage, Hz: 400 / 50 - Color: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% Image shows an example of a refurbished spray machine.

Kondisi: bekas, Tahun pembuatan: 2005, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm +/- 20 mm - Operator side: Right - Price for refurbished machine - Spray gun drive: dual-system - Height-adjustable spray units - Dry extraction system - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: approx. 6,500 m³/h - Paper tape transport system Gusdpfexnbhvex Aa Djd - Continuously variable feed speed: 1.5 – 7 m/min - PLC control with touch screen - Number of spray units installed: 0 - Number of paint pumps: 0 - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,300 mm - Width: 3,360 mm + 1,850 mm - Height: 2,700 mm - Total connected load: approx. 7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 - Location: In stock - Voltage fluctuations max. +/- 5 % ----- Optionally, we can also provide you with a quote for installation and commissioning of the system, as well as operator training. Upon request, we also offer regular maintenance and servicing for the machine. For further information, please do not hesitate to contact us!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, W&VE Icing Spraying Machine - used - year of manufacture: 2025 - technical condition: excellent Gusdpfezi A Akjx Aa Djd - 6-month warranty - collection from warehouse / shipping option available - price on request

Kondisi: baru, Tahun pembuatan: 2026, panjang benda kerja maks. 3.800 mm Spindel frais 1 unit Motor utama 15 kW Pengontrol Maestro active windoor SCM Windor NT 1 PUSAT PEMESINAN SUDUT UNTUK PEMBUATAN JENDELA DAN PINTU ----- Deskripsi singkat dari produsen: Windor NT1 adalah pusat pemesinan sudut untuk pembuatan jendela dan pintu. Dengan dimensi yang ringkas, mampu menjalankan semua langkah kerja seperti pemotongan, pembuatan lubang pasak, pengeboran, frais, dan pembentukan profil. Sepenuhnya terlepas dari konsep desain, jenis sambungan, penampang, dll. ----- Deskripsi teknis dari produsen: Gusdoy T R S Ropfx Aa Djd Posisi "1": Unit gergaji potong Fitur: - Daya motor: 4 kW (5,5 HP) - Kecepatan: 3000 rpm - Diameter alat maks.: 400 mm - Lubang bilah gergaji: 80 mm / Diameter flens: 100 mm - Pemosisian vertikal pneumatik HIDUP/MATI - 1 koneksi penyedot debu, diameter: 160 mm Posisi "2": Unit pasak dan alur Fitur: - Spindel berkinerja tinggi, diameter: 50x320 mm - Daya motor: 7,5 kW (10 HP) - Kecepatan: 3500 rpm - Diameter alat maks.: 320 mm - Kedalaman pasak maks.: 105 mm - Gerakan aksial di bawah meja kerja: +15/-300 mm - Perangkat pelindung serpihan otomatis Jolly - Sudut pasak maksimum: ± 60° - Pemosisian vertikal melalui motor brushless M.C. - Rotasi searah jarum jam - 1 koneksi penyedot debu, diameter: 200 mm Posisi "3": Unit frais profil Fitur: - Spindel berkinerja tinggi, diameter: 50x320 mm - Daya motor: 7,5 kW (10 HP) - Kecepatan: 6000 rpm - Diameter alat min.-maks.: 130-240 mm - Gerakan aksial di bawah meja kerja: +15/-300 mm - Pemosisian vertikal melalui motor brushless M.C. - Pemosisian horizontal pneumatik HIDUP/MATI dengan penahan revolver 5 arah (Standar, jika opsi 99.06.62 tidak ditentukan) - Rotasi searah jarum jam / berlawanan arah jarum jam - Fungsi menyelam simultan untuk fungsi pelindung serpihan saat membalik Posisi "4": Unit frais profil Fitur: - Spindel berkinerja tinggi, diameter: 50x320 mm - Daya motor: 7,5 kW (10 HP) - Kecepatan: 6000 rpm - Diameter alat min.-maks.: 130-240 mm - Gerakan aksial di bawah meja kerja: +15/-300 mm - Pemosisian vertikal melalui motor brushless M.C. - Pemosisian horizontal pneumatik HIDUP/MATI dengan penahan revolver 5 arah (Standar, jika opsi 99.06.62 tidak ditentukan) Posisi "5": Unit "DUO" Unit alur bayangan, lengkap dengan: - Diameter spindel: 50 mm - Panjang spindel: 3 mm - Kecepatan: 9000 rpm - Diameter alat: 154 mm Unit untuk memotong profil kaca dan/atau frais fitting dengan: - Diameter spindel: 30 mm - Panjang spindel: 35 mm - Kecepatan: 6000 rpm - Diameter alat maks.: – Bilah gergaji untuk memotong profil kaca: 200 mm – Alat untuk frais fitting: 240 mm Fitur umum: - Rotasi sudut pneumatik dengan 2 posisi: 0°-90° - Pemosisian pneumatik dalam/luar HIDUP/MATI dengan penahan revolver 5 arah - Pemosisian aksial manual - 1 koneksi penyedot debu, diameter: 160 mm ----- Maestro active windoor Pengontrol mesin diatur pada dua level. Level pertama terdiri dari pengontrol numerik industri dari BECKHOFF, yang menjalankan semua fungsi kontrol CNC. Level kedua adalah komputer industri, konsol “eye-M evo”, yang berfungsi sebagai antarmuka antara manusia dan mesin. ----- Harga o....

Tahun pembuatan: 2007, Kondisi: siap digunakan (bekas), Tersedia satu jalur perakitan untuk daun jendela kayu, yang terdiri dari tiga komponen utama. 1) Meja penempatan daun jendela dengan mesin pemotong dan obeng otomatis Powasert. 2) Gergaji untuk memotong bingkai kaca Max Striffler. 3) Mesin pengebor untuk engsel sudut dan lubang pegangan Ruchser RU-GOB-ES, tahun pembuatan: 2007. Dokumentasi tersedia. Pemeriksaan di lokasi dapat dilakukan. Hanya penjualan dalam bentuk paket yang dimungkinkan. Gedjzi Eimopfx Aa Dsud

Kondisi: bekas, Tahun pembuatan: 2023, The machine is ready for demonstration at our warehouse in Blomberg. The machine is prepared for painting and is already equipped with: - 1 unit HD pump, Binks Maple 8/25, up to 175 bar - 4 units Airmix spray guns, Sames-Kremlin AVX. The machine features a switching valve for rapid color changeover, and a lever that can be switched to a maximum of 3 color circuits and 1 cleaning solution pump (options). The machine is configured in explosion-proof (Ex) design. - Manufacturer: Ka-Ma - Model: KR BM 1000 B - Year of manufacture: 2023 - Working width: 1,200 mm (1,300 mm) - Single gun drive configuration - Dry extraction system - Conveyor belt transport system - Continuously adjustable feed speed: 2 - 8 m/min Gsdjzf N Thopfx Aa Deud - With paint recovery - SPS, LS gun control - Number of installed color circuits: 3 - Number of installed spray guns: 4 - Spray guns: Sames/Kremlin AVX, Airmix - Airmix spraying system - Height-adjustable spray guns: 150 mm - Pump manufacturer: Binks Maple 8/25, up to max. 175 bar - Including intake air filter ceiling - Suitable for water-based and solvent-based paints - Exhaust capacity: 12,000 m³/h - Length: 3,243 mm - Width: 3,482 mm - Height: 2,450 mm - Voltage/frequency: 400 V / 50 Hz - Color: RAL 7035, light grey - Weight: 3,100 kg _____ Optionally, we can provide you with an additional quotation for assembly and commissioning of the system, as well as staff training. On request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!

Kondisi: bekas, Tahun pembuatan: 2018, Technical Data: Pos. 1 - VEN CLEAN Smart Dust Extraction System - Working width: 1,300 mm - Length: 1,060 mm - Roller conveyor: 1,000 mm - Extraction fan: 4,000 m³/h - Compressed air: 980 Nl/min - Dust extraction air nozzles - With ionization Pos. 2 - VEN SPRAY PERFECT Automatic Spraying Machine - Year of manufacture: 2018 - Working width: 1,300 mm - Working height: 940 mm ±20 mm - Part detection via light curtain - CNC 7000 control system - Operator side: right - Spray gun drive in Duo-design Z16 - Dry extraction with filter - Extraction port diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - External filter box, LxWxH: 3,500 x 1,280 x 2,740 mm - Paint recovery system via V-band - Continuously adjustable feed speed: 2 - 6 m/min - Installed spray circuits: 2 pcs. - Quick-change spray arm system, 1 pc. - Number of installed spray devices: 4 pcs. - Number of material pumps: 1 pc. - Supply air filter ceiling G5 - Length approx. 6,590 mm - Width: 3,666 mm (+1,152 mm) - Height: 2,500 mm - Total connected load: 21 kW - Voltage, Hz: 400 / 50 - Color: RAL 7035 - Location: from 01/2025 in stock - Voltage fluctuation max. +/- 5% _____ Optionally, we can also provide you with an offer for installation and commissioning of the system, as well as staff training. Gujdpfx Aaozf N Tbe Dsd Upon request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Kondisi: bekas, Tahun pembuatan: 2008, Spray Coating Machine CEFLA FINISHING EASY 2000 DUO D - Manufacturer: Cefla - Model: EASY-DUO - Year of manufacture: 2008 - Working width: 1300 mm - Operator side: left - Price applies to an overhauled machine - Current condition: machine not yet overhauled - Gun drive in DUO configuration - Dry extraction system - Exhaust air capacity: 12,000 m³/h - Conveyor belt transport system - Continuously variable feed speed: 2 - 8 m/min - Belt cleaning via roller cleaning system - With paint recovery system - Installed paint circuits: 2 pcs. - Number of installed spray units: 4 pcs. - Spray units type: Kremlin AVX Gedpjzf N N Nsfx Aa Djud - Airmix spray system - Height-adjustable spray units - Number of paint pumps: 1 pc. - Pump manufacturer: Kremlin 16-120 - Supply air filter ceiling - Explosion-proof design - Suitable for solvent-based coatings - Suitable for water-based coatings - Used machine, good condition - Length: approx. 6152 mm - Width: 3,700 mm - Height: 2,895 mm - Total connected load: 18 kW - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide you with a quote for installation and commissioning of the system, as well as employee training. On request, we also offer regular maintenance and servicing for the machine. For further information, please do not hesitate to contact us!

Kondisi: bekas, Tahun pembuatan: 2005, nomor mesin/kendaraan: A0407004, - Manufacturer: Venjakob - Model: VEN SPRAY DUO/C CNC 6000 - Year of manufacture: 2005 - Working width: 1300 mm - Operator side: right - Price for refurbished machine - Current condition: machine not refurbished - Gun drive in duo configuration - Dry extraction system - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system - Continuously adjustable feed rate approx. 2 - 7.5 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, Touch Screen CNC - Installed paint circuits: 1 pc. - Quick-change system for spray units - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine - Total connected load: approx. 29 kW - Voltage, Hz: 400 / 50 - Colour: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5 % Gedpfezf N H Ujx Aa Dsud The image shows an example of a refurbished spray machine. _____ Optional: We can also provide you with a quotation for installation and commissioning of the unit, as well as staff training. On request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Kondisi: bekas, Tahun pembuatan: 2001, nomor mesin/kendaraan: 5358, - Manufacturer: Elmag Superfici - Model: TWIN SPRAY - Year of manufacture: 2001 - Working width: 1,300 mm - Working height: 890 mm ± 20 mm - Operator side: right - Price for refurbished machine - Dual-drive spray gun system - Dry extraction - Exhaust air capacity: 8,000 m³/h - Conveyor belt transport system - Belt cleaning via roller cleaning system - Equipped with belt cleaning system - Belt cleaning located at the rear of the machine, in the direction of travel - With paint recovery system - Spray gun control system - Number of installed spray units: 4 pcs. - Spray unit type: Kremlin ATX - Airmix spray system - Intake air filter ceiling - Length: 5,950 mm - Width: 3,980 mm - Height: 2,790 mm - Total connected load: 21 kW, 40 A - Voltage, frequency: 400 V / 50 Hz - Location: in stock _____ Gujdpfxozf N Eqo Aa Ded Optionally, we can provide you with a quote for installation and commissioning of the unit, as well as staff training. On request, we also offer regular maintenance and servicing of the machine. For further information, simply contact us!

Kondisi: bekas, Tahun pembuatan: 2008, nomor mesin/kendaraan: 7281, - Manufacturer: Elmag Superfici - Model: Magnum 3.2.2 - Year of manufacture: 2008 (2010) - Working width: 1,350 mm - Working height: 900 mm +/- 20 mm - Operator side: right - Current condition: machine not overhauled - Gun drive in duo configuration - Spray gun arms individually controllable - Dry extraction system - Exhaust air capacity: 13,500 m³/h - Belt conveyor system - Continuously adjustable feed speed up to 18 m/min - 2 belt cleaning trolleys - Belt cleaning via roller cleaning system - Belt cleaning located at the rear of the machine, in the direction of travel - With paint recovery system - Gun control - PLC control with touchscreen - Installed paint circuits: 2 pcs - Supply air filter ceiling - Length: approx. 6,680 mm - Width: 4,455 mm - Total connected load: approx. 26.3 kW - Voltage, Hz: 400 / 50 - Location: not in stock Gjdpezf N Dtsfx Aa Djud - Voltage fluctuations max. +/- 5%

Kondisi: sangat baik (bekas), Here we offer you a Mega Electronics conveyor spray processing machine. Mega Electronics Conveyor Spray Processing Machine Model: FAPC 3000 The new FAPC units were developed to operate with the latest developer, etchant, and stripping chemistries for the production of printed circuits, metal signs, and chemically milled metal components. The FAPC 3000 can accommodate panels up to 300 mm wide. Process chamber: 450 mm Rinse chamber: 280 mm Spray bars – Top: 4 in the process chamber, 1 in the rinse chamber Spray bars – Bottom: 4 in the process chamber, 1 in the rinse chamber Nozzle type: Poly V-jet – ¼ turn, detachable Nozzles per pipe: 3 + 4 for processing, 4 for rinsing Nozzles: Precisely mounted for perfect alignment. Adjustable, compact manifold systems. Flow/pressure control: Adjustable throughout the upper and lower range. Conveyor speed control: High-torque AC drive motor system, powered by a precision inverter with digital displays for accurate operator reference. Speed range: 45 mm – 1.6 m/min Temperature range: Ambient to 50°C ±1°C Gjdpfjzdqbwex Aa Dsud Temperature controller: Digital Liquid level sensors: For heater and pump Manual reset high temperature cut-off Voltage: 220/240V 50Hz (13A plug) Dimensions: Height: 670 mm Depth: 670 mm Length: 1430 mm Including drip tray Type: FAPC 3000 Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and information!) For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), 7382 TECHNICAL DATA Tenoning carriage: - Electrically driven carriage feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450 mm, extendable to 1150 mm - Cross fence on carriage – cutting length on extendable telescope: 1860 mm - Rotating block in the cross fence - 2 pneumatic clamps Gsdpfxezcu Tcj Aa Dsud Cross-cut saw: - Max blade diameter: 380 mm - Max cutting height: 110 mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle height/stroke regulation via handwheels - Max tool diameter: 320 mm - Spindle diameter: 40 mm - Working spindle height: 220 mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle height/stroke regulation via handwheels - Max tool diameter: 200 mm - Working spindle height: 220 mm - Spindle diameter: 54 mm - Spindle lock - Extendable support from table - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200 mm - Blade bore diameter: 30 mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50 mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameter: 60 mm, 2x130 mm, 110 mm, 100 mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600 mm, weight approx. 2500 kg ADVANTAGES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Cross-cut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (depending on exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Tahun pembuatan: 2009, Kondisi: sangat baik (bekas), Elumatec SBZ 140 Panjang eksekusi: 7,6 meter Berat sekitar 5000 kg Penukar alat otomatis Sistem penjepit 2-bagian 2 stopper pneumatik Penutup keselamatan Tirai cahaya Deteksi penjepit otomatis Pelumasan terpusat Sistem semprot pendingin Keranjang serpihan Unit pengkondisian Kecepatan maksimal spindle: 24.000 rpm Koneksi alat: dudukan HSK-63F, Penukar alat 8 posisi. Diameter frais maksimum: 80 mm Diameter gergaji maksimum: 200 mm Udara bertekanan 7 bar SBZ 140 adalah pusat pemrosesan profil 4-sumbu (sumbu: X, Y, Z + A). Didesain untuk profil aluminium dan baja berdinding tipis. Pusat pemrosesan CNC 4-sumbu (X/Y/Z + sumbu putar/tilt A) Sumbu X: perpindahan sekitar 7900 mm Godezhg S Topfx Aa Dsud Sumbu Y: perpindahan sekitar 850 mm Sumbu Z: perpindahan sekitar 650 mm Sumbu A (rotasi / kemiringan): Sudut dapat diprogram bebas, –90° hingga +90° Kecepatan perpindahan sumbu: Sumbu X hingga sekitar 65 m/menit, sumbu Y dan Z hingga sekitar 60 m/menit (tergantung konfigurasi) Kontrol: sistem CNC 4-sumbu, dengan PC, layar warna, USB & jaringan. Perangkat lunak: eluCam. Penjepit material otomatis, pemposisian otomatis dengan pin indeks Operasi pendel/shuttle (dua zona kerja), meningkatkan efisiensi produksi. Selain milling dan bor, juga tapping, pemotongan/gergaji, dan pemrosesan profil – semua dapat dilakukan dengan profiling tetap. Catatan: Informasi pada halaman ini didapat dan disusun dengan sebaik-baiknya, namun akurasi tidak dapat dijamin. Oleh karena itu, ini bukan representasi atau kontrak dan kami menyarankan Anda untuk selalu memeriksa setiap detail yang relevan. Informasi keuangan PPN/margin: PPN: Harga yang tercantum belum termasuk PPN (PPN dapat dikreditkan untuk pelaku usaha).

Kondisi: bekas, Tahun pembuatan: 2020, Panjang maksimal benda kerja 6360 mm Spindel frais 1 unit Motor utama 13 kW Kontrol Maestro SCM CNC processing center ACCORD 40 FX untuk jendela dan pintu ----- OPSI tersedia dengan biaya tambahan: Perlengkapan alat untuk pembuatan jendela dan pintu yang lengkap, termasuk (potongan jendela atas permintaan!): Jendela kayu IV 68, 78, 92 Jendela kayu "stil" Gsdpfx Aoy Hl Iyea Djud Jendela kayu-aluminium Pintu masuk rumah Pintu geser angkat Jendela kotak Mesin masih dapat dipertontonkan dalam operasi! Ringkasan teknis (deskripsi detail atas permintaan!): ----- - Area kerja X-Y = 6360x1905 Z = 350 - Meja otomatis dengan 8 rel pembawa MATIC - L1825 - Spindel 5-sumbu MAXI - Prisma T, HSK 63 E, 13 kW - Pengaturan RTCP - Sistem kalibrasi otomatis untuk unit kerja Prisma - Alat pembuangan serpihan di elektrospindel, dapat disesuaikan - Persiapan untuk gearbox sudut "Prisma T-S" - Unit kerja BRC: pisau potong untuk pemrosesan ujung, 1 koneksi untuk pahat, vertikal 3 kepala bor vertikal independen, jarak antara sumbu 32 mm 3 kepala bor vertikal (tidak independen), jarak antara sumbu 21,5 mm, untuk pengeboran kunci 4 kepala bor horizontal (masing-masing 2 per sisi, tidak independen), jarak antara sumbu 21,5 mm 2 kepala frais horizontal (masing-masing 1 per sisi) - TRC 48 - Majalah alat belakang 48 tempat alat (tidak termasuk dudukan alat) Jarak antara tempat 104 mm Diameter alat maksimum 350 mm Panjang alat maksimum 320 mm Berat maksimum per alat 10 kg (15kg dengan spindel HSK 63 E) Berat total maksimum pada majalah 250 kg - MACH 5 - Alat ganti cepat: Memungkinkan penggantian alat pada elektrospindel hanya dalam beberapa detik. - Mode pendulum - Pelumasan otomatis untuk sumbu - Konsol operasi eye-M dengan PC terintegrasi - Panel kontrol tambahan tetap - TECPAD - remote control fungsi mesin - Persiapan rahang penjepit H145 untuk meja kerja dengan 8 rel pembawa - Baris pembatas depan H110 untuk meja kerja dengan 8 rel pembawa - Baris pembatas belakang H110 untuk meja kerja dengan 8 rel pembawa - Pengisap H110 145x145 mm - Pengisap H110 145x55 mm dapat diputar - Pengisap H110 180x65 mm dapat diputar - Baris pembatas samping pertama H145 untuk meja kerja dengan 8 rel pembawa - Baris pembatas samping kedua H145 untuk meja kerja dengan 8 rel pembawa - Penjepit H145 dengan basis bulat - Penjepit H145 dengan basis persegi - 6 unit pengangkat dengan double stroke H145 - Laser dan pembatas referensi H145 untuk lengkungan (kiri) - Sistem keamanan PRO-SPEED - Maestro cnc - antarmuka operator mesin dan pemrograman - Maestro pro view – perangkat lunak simulasi Penjualan peralatan sesuai dengan kondisi, jumlah, dan aksesori yang ada di stok kami. Catatan untuk potongan jendela, gambar alat, daftar sistem alat: PT Engelfried tidak memberikan jaminan bahwa alat yang tersedia sesuai dengan sistem yang disebutkan atau digambar. (data teknis menurut produsen - tanpa jaminan!)