Mesin semprot otomatis Venjakob VEN SPRAY Duo 2007

Venjakob VEN SPRAY Duo

Kondisi: bekas, Tahun pembuatan: 2000, nomor mesin/kendaraan: A 00 12 006 / 0100, New, ASCOM gun control system, PLC, light curtain, and touch panel, mounted at the infeed of the spray machine. - Manufacturer: Venjakob - Model: VEN SPRAY Duo - Retrofit scheduled for 2026 (Year of construction: 2000) - Working width: 1,300 mm - Operator side: right - Price for refurbished machine - Current status: in overhaul phase - Dual gun drive system - Dry extraction - Exhaust air capacity: 10,000 m³/h - Extraction nozzle diameter: 500 mm - Conveyor belt transport system - Feed speed: approx. 2–8 m/min - Equipped with belt cleaning system - With paint recovery via V-belt system - Gun control unit with touch screen - Installed paint circuit: 1 unit - Supply air filter ceiling - Suitable for water-based coatings - Suitable for solvent-based coatings - Control cabinet integrated in the machine - Total connected load: approx. 19 kW - Length: 6,066 mm - Width: 3,450 mm - Height: 2,330 + 440 mm - Voltage, Frequency: 400 V / 50 Hz - Colour: Light grey RAL 7035 + black - Location: in stock - Voltage fluctuations max. +/- 5% Dsdpfxox Ihvpo Ahaouw The images shown are examples of an overhauled spray machine. _____ Optionally, we can also provide you with a quotation for installation and commissioning of the unit, as well as staff training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Komplette Parkett-Lackieranlage Hersteller – SORBINI/VIET Dsdpfxordgrvo Ahajuw Baujahr – 2001 Leistung – 800 m²/Schicht Zyklusdauer – 8 Min. Linienlänge – 42 m

Kondisi: baru, Glazing Bead Stapler "2 P Jumbo automatic E.C." - new - Duedpfjvnh T Nox Ahaow Your advantages: - Corner joints are closed - No open glazing bead joints - No color differences during painting - Glazing bead frames are easy to assign 2P Jumbo Automatic E.C. Stapler for Glazing Bead Frames Choice between automatic and manual operation mode; Equipped with angle stop, clamping device from top and front Pressure can be adjusted separately. Insertion of parallel and stacked staples is possible via electronic programming control. Stapler can be mounted on a suitable work table, Operation via foot pedal. ----- Price in this version on request! Plus statutory VAT as well as packaging/shipping ----- Pictures show the 2P Staple Corner Joining Machine with option movable work table (see details under additional charges) Additional Charges: ----- Movable Work Table Height-adjustable from 700 - 1000 mm, 2 removable support rails, 1000 mm long, 2 swiveling and laterally adjustable support rails, 1000 mm, support rails covered with felt, 4 swivel castors, 2 with locking function. ----- Additional charge: EUR 1,311.00 net Staples: Packages 15 mm staples (pack of 2,000 pcs.): Price EUR 22.00 12 mm staples (pack of 3,000 pcs.): Price EUR 32.00 10 mm staples (pack of 3,000 pcs.): Price EUR 32.00 Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical specifications according to manufacturer – subject to change!)

Kondisi: bekas, Tahun pembuatan: 2004, nomor mesin/kendaraan: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm +/- 20 mm - Operator side: left - Spray gun drive: single version - Dry extraction - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h - Paper belt conveyor system - Feed speed steplessly adjustable: 1.5 – 7 m/min - PLC control with touchscreen - Number of installed spray units: 0 pcs - Height-adjustable spray units - Number of paint pumps: 0 pcs - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,450 mm - Width: 3,360 mm + 1,000 mm - Height: 2,600 mm - Total connected load: approx. 7.1 kW / 28.6 A Djdpfsv N D Ewjx Ahasuw - Voltage, frequency: 400 V / 50 Hz - Location: in stock - Voltage fluctuations max. +/- 5 % ----- Optionally, we can also provide you with a separate quote for installation and commissioning of the system, as well as training of your personnel. Upon request, we also offer regular maintenance and servicing of the machine. For more information, please do not hesitate to contact us!

Tahun pembuatan: 2026, Kondisi: baru, AL-KO sanding table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table range. It is certified according to GS-HO-11 and carries the "Wood Dust Tested according to BGI 739-1" seal. This makes it suitable for manual sanding work as well as for processing workpieces with handheld machines. The sanding table is made of galvanized steel sheet. The extraction tray is aerodynamically optimized. The funnel-shaped design of the tray with an integrated air duct directs airflow efficiently to the extraction nozzle. Connection to the on-site extraction system can be made, depending on the required extraction capacity, via either a 140 mm or 160 mm diameter connection nozzle. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grilles are air-flow optimized towards the suction port, ensuring optimal extraction performance. For cleaning the inside of the sanding table, the beech wood slatted top can be removed and the air duct can be detached by loosening a few screws. The sanding table is delivered pre-assembled; only the legs need to be mounted and adjusted to the desired working height. Your benefits: • Accessible from all four sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long edges for edge sanding Dedofyadbspfx Ahajuw • Workpiece-protecting removable beechwood slatted top • Funnel-shaped airflow to the extraction nozzle Technical data: • Extraction nozzle: 140 / 160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the nozzle at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Working height adjustable: 735 – 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), WEINIG window production line consists of: Unirex 3000 machining centre Dujdpfx Aheh H Iyxoaew Univar 15 Unitex 15

Kondisi: baru, Tahun pembuatan: 2025, Suction nozzle diameter: 1 x 200 mm, 3 x 100 mm Nominal air flow rate: 1,760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Dodpehpmawjfx Ahaeuw Filter cleaning: motorized Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1,340 mm Machine width: 900 mm Machine height: 2,170 mm Weight: 178 kg

Kondisi: baru, Saw blade diameter 350 x Ø 30/40 mm Cutting diameter 135 mm Cutting length 430 mm Saw blade dimensions 350x3.0/2.4x40 mm Speed 3800 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 100 kg Space requirement approx. 1300 x 800 x 1600 mm - Crosscut and mitre circular saw for crosscuts - Mitre adjustment to both sides (60° / 45°) with fixed stop - Mitre cut on one side up to 45°, with fixed stop - Robust cast iron construction - Precision ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Saw blade height infinitely adjustable - Connection for optional extraction Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x carbide-tipped circular saw blade 350 x 3.0/2.4 x 40 mm * Z = 108 FTZ negative for aluminium and plastic - Steplessly adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: 2 vertical clamping cylinders, adjustable with hand lever valve Dujdpexabqzefx Ahasw - 1x machine stand - More powerful drive motor (3.0 kW)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, hecht-es-350-glasleistensaege-de Dodevpr N Rspfx Ahasuw

Kondisi: baru, Working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- Base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800mm – 1000mm) - Conveyor system for timber lengths from 300mm to 4200mm - Conveyor system for timber widths up to 240mm Roller conveyor – infeed - Infinitely variable driven roller conveyor approx. 5 - 25 m/min - Drive via geared motor 0.37 kW, line shaft and PU round belt - Roller diameter 50mm, 240mm roller length with PVC coating - Transfer to cross conveyor by lifting/lowering the roller conveyor - Roller covers according to HBG Cross conveyor - Cross conveyor with 6 traverses - PVC-coated conveyor belts (green), 50mm wide, guided in plastic tracks Dsdpfji Hmpiex Ahaouw - Infinitely variable driven cross conveyor approx. 5 – 20 m/min - Drive via geared motor 0.37 kW - Approx. 1750mm between stops Roller conveyor – outfeed - Infinitely variable driven roller conveyor approx. 5 - 25 m/min - Drive via geared motor 0.37 kW, line shaft and PU round belt - Roller diameter 50mm, 240mm roller length with PVC coating - Transfer to cross conveyor by lifting/lowering the roller conveyor - Roller covers according to HBG ----- Transport belt approx. 320mm x 3500mm Base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable support stands (approx. 800mm – 1000mm) - Conveyor belt for timber lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt mounted on castors with brake Belt - Infinitely variable drive approx. 5 - 25 m/min - Driven by geared motor 0.37 kW - Belt PVC-coated, 260mm wide - Stops on both sides approx. 15mm ----- Control: - Ready to connect, with dedicated control system and logic - Siemens PLC, 24 V DC - Siemens frequency inverter - Optical limit switches and emergency-stop loop - Fully pre-wired with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatics: 6-8 bar, consumption approx. 16 NL/min Colour: RAL 7035 light grey Basic EU Directive 2006/42/EC in accordance with 2006/95/EC Low Voltage Directive as well as 2004/108/EC EMC Directive ----- Price for the above configuration ex works: on request! Plus packing and transport costs ----- (Technical data according to manufacturer, subject to change!)