Beli Frech Daw 200S bekas (11.576)

Kondisi: bekas, Tahun pembuatan: 1995, Clamping force 2200 kN Clamping plate 755 x 755 mm Tie bar spacing 500 x 500 mm Machine weight approx. 8 t Clamping stroke 430 mm Ejector force 110 kN Ejector stroke 100 mm Mould height 250–600 mm Tie bar diameter 85 mm Injection force 130 kN Injection stroke 175 mm Injection plunger diameter 70, 80, 90 mm Injection volume (DIN 24480) 450, 636, 856 cm³ Specific injection pressure 335, 260, 203 kp/cm² Corresponding parting surface 656, 846, 1078 cm² Decompression stroke 230 mm Itjdpfxjvxlufj Akpjh Used die casting machine DAW 200 S with Datavario control system for use with zinc alloys. Available upon agreement Recommendation from the manufacturer: a general overhaul at an authorized overhaul facility is advised. The scope of refurbishment can be agreed upon as required.

Kondisi: bekas, Tahun pembuatan: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Distance between tie bars: 300 x 300 mm Machine weight: approx. 4.5 t Itodpfx Ajtuxmyskpoh Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Injection plunger diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Demolding stroke: 150 mm Used machine DAW 50 as a basis for complete refurbishment, without control cabinet, furnace, or furnace housing. A general overhaul can be carried out at the manufacturer’s overhaul facility. The scope of the overhaul can be defined as required.

Kondisi: bekas, Tahun pembuatan: 1992, translate-001 Iodpfxofrvzvj Akpjth

Kondisi: bekas, Tahun pembuatan: 2000, Clamping force: 900 kN Iedeyzt D Eopfx Akpjth Clamping plate: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.5 t Clamping stroke: 280 mm Ejector force: 60 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Injection force: 75 kN Injection stroke: 130 mm Injection plunger diameter: 50, 55, 60 mm Casting volume (DIN 24480): 119, 163, 214 cm³ Specific injection pressure: 380, 315, 265 kp/cm² Corresponding parting surface: 236, 285, 340 cm² Core pull stroke: 150 mm Completely overhauled die casting machine DAW 80 GO with DataLogic control for processing zinc alloys. Partial extract of the general overhaul: • Upgrade of the machine with a new control cabinet and new operator panel, including replacement of all electrical wiring • Renewal of hydraulics (blocks and valves) • Overhaul of the clamping unit (Detailed list available on request) The machine is equipped with the following options: • Motorised safety door, injection side left • Discharge chute cover on base frame (straight) • Standing operator panel • Discharge chute cover on base frame • Multi-chamber holding and melting furnace with TOC pump • Furnace control cabinet for furnace type Z • Use of water-glycol • Side GO • Wired signal interface for part removal (DISPO10) • RSD equipment package with switch • Spraymotion 611 E with servo drive, single-circuit • Release agent container TD 20 • Spray bar CR 275 Additional options are available on request.

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: fungsi terbatas, Used Oskar Frech DAW 125 with control cabinet and crucible Itedpfx Akjwywn Espjh

Kondisi: sangat baik (bekas), Uncoiler FRECH 2 ton x 650 mm, diameter dalam coil 240 - 270 mm, diameter luar coil 1500 mm Ijdpfx Akszd R Ttepoth

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1996, de-hu-001 Itsdpfx Akoza E Rmepeh

Kondisi: baru, Tahun pembuatan: 2018, Crucible capacity 420 kg As-new and unused machine furnace suitable for DAW20A or DAW20S. The Metec furnace, model Z20/120C, is equipped with a durable stainless steel crucible. The crucible holds 420 kg, with a melting capacity of 120 kg/h at a connected load of 21.5 kW. Itodpfx Akjtv Rlzepsh A suitable control cabinet can be custom-built upon request.

Kondisi: bekas, Tahun pembuatan: 2007, Used electric sprayer Spraymotion 411 E for use on die casting machines. The device is function-tested by the manufacturer. Includes spray and blow bar (SR system with adjustable nozzles) and stand Itedpfxstwfkno Akpoh Connection: 24-pin plug Drive module: 400 mm stroke

Kondisi: bekas, Tahun pembuatan: 1999, Clamping force: 3150 kN Clamping plate: 900x900 mm Tie bar distance: 550x550 mm Machine weight approx. 15.5 t Clamping stroke: 500 mm Ejector force: 159 kN Ejector stroke: 120 mm Mould height: 300-700 mm Tie bar diameter: 110 mm Injection force: 158 kN Injection stroke: 250 mm Injection piston diameter: 70, 80, 90, 100 mm Injection volume (DIN 24480): 514, 791, 1105, 1455 cm³ Specific injection pressure: 410, 316, 249, 201 kp/cm² Corresponding parting surface: 768, 996, 1265, 1597 cm² Release stroke: 300 mm Used die casting machine DAM 315 S with Datacontrol control system for processing magnesium alloys. Available from used machinery stock. Iedpfovfhrtox Akpjth The machine is equipped with an electric furnace from Rauch, type MMO 315E. No spraying device included. Manufacturer recommends repair/overhaul at the reconditioning plant; scope of work can be determined by mutual agreement.

Kondisi: baru, Tahun pembuatan: 2024, Clamping force 2200 kN Clamping plate 755x755 mm Tie bar distance 500x500 mm Machine weight approx. 8 t Iedpfevvx Hcjx Akpjth Clamping stroke 430 mm Ejector force 110 kN Ejector stroke 100 mm Mould height 250-600 mm Tie bar diameter 85 mm Injection force 130 kN Injection stroke 175 mm Plunger diameter 70, 80, 90 mm Injection volume (DIN 24480) 450, 636, 856 cm³ Specific injection pressure 335, 260, 203 kp/cm² Associated parting surface 656, 846, 1078 cm² Knockout stroke 230 mm Machine equipment 1.1.1 Motor-driven safety door on the right (in casting direction) 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Energy efficiency equipment package 2.0.1 Ejector assistance packages 2.1.2 Core pull unit M2 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1 Casting assistance packages 3.0.1.2 Casting assistance package Technology 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-fill casting system 3.4.5 Simplified plunger removal 3.5.2 Electric nozzle and casting container heating 3.5.3 Plug-in connectors for electric nozzle and casting container heating 4.3.1 Additional heat exchanger 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.4 Integrated water circuit control 2+8 circuits 5.1.1 Machine control DATADIALOG – Shot Stop 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for part removal 6.1.4 Serial interface for 4 heating-cooling circuits 6.1.5 Interface for vacuum equipment 6.1.7 Frech interface for gatekeeper function 6.5.2 Equipment package RSD with switch 7.2.3.3 Spraymotion 811 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent container TD 20 7.4.0.6 Spray bar CR 458

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2001, Fungsionalitas: tidak berfungsi, FRECH DAK 720-71 RC Mesin Die Casting, bekas Nomor mesin 440403, gaya penjepit 8000 kN, langkah penjepit 825 mm, gaya ejeksi 364 kN, langkah ejeksi 180 mm, tinggi cetakan 350 hingga 1000 mm, pelat penjepit 1300 x 1300 mm, jarak antar kolom 825 mm, diameter kolom 180 mm, gaya pengecoran maks. 713 kN, langkah pengecoran 600 mm, diameter piston pengecoran 70 hingga 120 mm, volume pengecoran 1539 hingga 4523 cm³, tekanan operasi 160 bar, motor penggerak 45 kW, dengan furnace dosing MELTEC AVDF 1200/5000, tahun 2017, nomor seri sistem, sebagai donor suku cadang Spesifikasi teknis dimensi (p x l x t) kira-kira 8000 x 7500 x 3500 mm Ijdpfx Akjwc Tdzepoth berat kira-kira 36000 kg tahun pembuatan 2001

Kondisi: bekas, Tahun pembuatan: 2017, werkstueckgewicht-2000g-waage-giessmaschine-produktion-geprueft- instandgesetzt Itedjy Diauepfx Akpsh

Tahun pembuatan: 1988, Kondisi: bekas, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer - Industrial trailer with: single-axle turntable steering - 4 roller tracks, rollers: Ø 65 x 365 mm - Load capacity: max. 6800 kg - Tyres: solid rubber - Trailer coupling - External dimensions: 4760/2730/H585 mm Itedpfsfk Smuox Akpeh - Dead weight: 1100 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, An aluminium die-casting machine is available. Clamping force: 2,200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking: toggle system, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1,990 bar, projected area min./max.: 110 cm²/338 cm², performance: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar spacing: 500 mm/500 mm, mold height min./max.: 250 mm/600 mm, min. mold dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, air blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Iedpsucfwpsfx Akpsth

Kondisi: baru, Tahun pembuatan: 2025, Clamping force 240 kN Clamping plate 380x380 mm Distance between tie bars 250x250 mm Machine weight approx. 3.0 t Clamping stroke 180 mm Ejector force 28 kN Ejector stroke 50 mm Mould height 120–300 mm Tie bar diameter 45 mm Injection force 43 kN Injection stroke 85 mm Injection plunger diameter 36, 40, 45 mm Iodpfox Hp E Aox Akpjth Injection volume (DIN 24480) 47, 63, 87 cm³ Specific injection pressure 420, 340, 270 daN/cm² Corresponding parting surface 56, 70, 88 cm² De-moulding stroke 150 mm Machine equipment: 1.0.2 Clamping unit cover at machine base with scales / chute 1.0.3 Small parts cover in machine base 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – Energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1.2 Injection assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling injection system 3.4.5 Simplified injection plunger removal 3.4.6 Injection plunger stop on return stroke 3.5.2 Electric nozzle and injection pot heating 3.5.3 Plug-in connections for electric nozzle and injection pot heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction device DISPO10 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Control unit with visualization on support arm 6.5.2 Equipment package RSD with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.1 Spray bar CR 155

Kondisi: baru, Tahun pembuatan: 2020, en Itsdpfxeiu Smbe Akpsh

Kondisi: baru, Tahun pembuatan: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar spacing: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Casting force: 78 kN Casting stroke: 130 mm Plunger diameters: 50, 55, 60 mm Casting volume (DIN 24480): 147, 191, 241 cm³ Specific casting pressure: 396, 327, 275 daN/cm² Corresponding parting surface: 226, 274, 326 cm² Ejector stroke: 220 mm Itsdsr Hwf Aepfx Akpeh Machine Equipment 1.0.2 Clamping unit cover on base frame with integrated scale/slide 1.1.0 Motorized safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector Advantage Package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of the clamping unit 3.0.1 Casting Assistance Advantage Package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified casting plunger removal 3.4.6 Casting plunger stop on return stroke 3.5.2 Electric nozzle and casting chamber heating 3.5.3 Plug-in connections for electric nozzle and casting chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control, 2+6 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operator unit with visualization on support arm 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.3 Spray bar CR 275

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 234 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 625 mm, produsen pengendali: MAZATROL, model controller: Mazatrol SmoothG CNC, diameter benda kerja (maks.): 695 mm, This 4-axis Mazak QUICK TURN COMPACT 200 MSY L was manufactured in 2018. It features a maximum swing diameter of 695 mm and a machining diameter of 380 mm. Equipped with a Mazatrol SmoothG CNC control system, it ensures precision and efficiency. The main spindle supports speeds of up to 5,000 rpm, while the sub-spindle reaches up to 6,000 rpm. This is a great opportunity to purchase the Mazak QUICK TURN COMPACT 200 MSY L lathe. Contact us for further details. Machine Advantages Technical Advantages: 1. Capacity: - Maximum swing: 695 mm - Maximum machining diameter: 380 mm - Maximum bar capacity: 65 mm 2. Spindle: - Main spindle chuck size: 8 inches - Maximum main spindle speed: 5,000 rpm - Sub-spindle chuck size: 6 inches - Maximum sub-spindle speed: 6,000 rpm 3. Turret: - Number of tool stations: 12 - Maximum speed: 5,000 rpm 4. Axis travel: - X-axis: 234 mm - Y-axis: 100 mm - Z-axis: 625 mm - W-axis: 585 mm 5. Control system: - Mazatrol SmoothG CNC Additional Information: Fully equipped version with C-axis / Y-axis / sub-spindle / long bed Machine is still powered and under operation Ijdpfx Akoyk Tg Rjpoth

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), gaya penekanan: 204 t, Hydraulic press, tahun pembuatan 1995. EXNER EX SBR 200 ini memiliki gaya tekan 2000 kN dan daya penggerak 78 kW. Dengan volume oli 1.400 liter dan bobot 52.000 kg, mesin ini dirancang untuk kinerja yang tangguh. Jika Anda mencari kekuatan pres berkualitas tinggi, pertimbangkan hydraulic press EXNER EX SBR 200 yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. - Gaya tekan: 2000 kN - Daya penggerak: 78 kW Itsdpfxjzd Ewgs Akpoh - Kapasitas oli: 1.400 l - Langkah lanjutan: 56 mm - Berat: 52.000 kg - Jarak aman: 235 mm - Waktu lanjutan: 147 ms

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), berat keseluruhan: 12.500 kg, gaya penekanan: 204 t, panjang langkah: 400 mm, Pers Hidrolik 4-Tiang, tahun pembuatan 1997. Mesin tipe 4 SPY 200 SO dari August Luigart & Sohn GmbH & Co. KG (ALN) ini memiliki gaya tekan 2.000 kN dan langkah 400 mm. Area penjepitan tooling sebesar 1.460 × 890 mm dengan berat maksimum tooling atas sebesar 2.500 kg. Jika Anda sedang mencari kapasitas penekanan logam berkualitas tinggi, pertimbangkan mesin "August Luigart & Sohn GmbH & Co. KG (ALN) 4 SPY 200 SO" yang kami tawarkan. Silakan hubungi kami untuk informasi lebih lanjut. • Produsen: August Luigart & Sohn GmbH & Co. KG (ALN) • Tipe mesin: Pers hidrolik 4-tiang • Tekanan hidrolik: 285 bar Isdpfx Ajzd Efdjkpjth • Tinggi bukaan: 800 mm • Daya motor utama: 32,5 kW • Tegangan: 415 V • Frekuensi: 50 Hz • Area penjepitan tooling: 1.460 × 890 mm • Berat maks. tooling atas: 2.500 kg • Kapasitas oli: ca. 850 L

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, dokumentasi / manual, en-GB Iedpfx Aor Hbx Tekpeth

Kondisi: sangat baik (bekas), CTS Temperaturshock Test Cabinet TSS-70/350-A Equipment Data Manufacturer: CTS GmbH Model: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Cabinet Refrigeration Unit: Water-cooled Description Used temperature shock test cabinet from CTS. Suitable for shock and temperature cycling tests. Applications in industry, research, and quality assurance. Areas of Application - Material testing - Aging tests - Electronics and component testing - Temperature shock tests - Automotive and quality assurance Temperature Ranges Hot chamber: +50 °C to +220 °C Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Features - Touchscreen control - Microprocessor controller - Program operation - Digital setpoint/actual value display - 2-zone system - Transfer basket for rapid cycling - Viewing window - Integrated control cabinet - Chilled water connections Technical Design - Separate hot and cold chambers - Stainless steel test chamber - Industrial-grade construction Dimensions External dimensions (HxWxD): approx. 2450 x 2160 x 2200 mm Internal dimensions (HxWxD): approx. 610 x 850 x 680 mm Isdpfx Akey H Hk Aepoth Weight: approx. 2500 kg Documentation - Declaration of conformity - Test certificates - Operating manual - Circuit diagram and piping schematic - Spare parts list Service before delivery (optional) - Function test - Refrigerant service - Leak test - Test run with protocol Condition Used. Visual condition as per images. Scope of delivery Test cabinet TSS-70/350-A Documentation (if available) Inspection by appointment. Loading and transport can be organized on request. Subject to prior sale and changes. Please contact us if you have any questions.

Tahun pembuatan: 2008, Kondisi: bekas, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length for production and service. Accessories: - Full enclosure - Measuring probe for complete tool measurement - Workpiece holder adaptation A-axis from SK 50 to HSK 63 A - Loader for up to 6 sets of eroding wheels (tool changer) - Alphanumeric keyboard - Standard programs for measurement and eroding - Cooling and cleaning unit for dielectric fluid - Automatic fire extinguishing system - Extraction unit N183 - 1 interchangeable element - 1 flushing unit - 1 measuring arbor - 1 mounting flange for rotary electrodes Travel X-axis: 440 mm B-axis: +/- 15° Travel Y-axis: 876 mm Travel Z-axis: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° Workpiece carrier base: SK 50 Max. workpiece length: 200 mm Max. workpiece diameter: 250 mm Workpiece weight: 15 kg Connection rating approx.: 6.7 kW 400V/50 Hz Weight approx.: 7000 kg Dimensions W x D x H: 1987 x 3141 x 2275 mm Isdpfx Aezdinkokpeth Color: RAL 7047 Telegrey 4 / RAL 7045 Telegrey 1

Kondisi: baik (bekas), Tahun pembuatan: 1998, diameter luar chuck: 300 mm, lubang tembus: 70 mm, Aksesori Pemesinan MANDELLI - 200 MACH-ID 2998 Produsen: MANDELLI Tipe: 200 Tahun pembuatan: 1998 Diameter: 300 mm Chuck 4: x Itsdpfezdig Uox Akpsh Lubang spindle: 70 mm Harap diperhatikan: Informasi di halaman ini telah dikumpulkan sebisa mungkin oleh kami maupun dari produsen. Informasi diberikan dengan itikad baik, namun keakuratannya tidak dapat dijamin. Dengan demikian, informasi ini bukan merupakan pernyataan atau syarat kontrak. Kami sarankan Anda memeriksa semua detail penting.