Beli Frech Daw 80S bekas (9.725)

Kondisi: bekas, Tahun pembuatan: 2000, Clamping force: 900 kN Clamping plate: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.5 t Clamping stroke: 280 mm Ejector force: 60 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Injection force: 75 kN Injection stroke: 130 mm Injection plunger diameter: 50, 55, 60 mm Casting volume (DIN 24480): 119, 163, 214 cm³ Specific injection pressure: 380, 315, 265 kp/cm² Corresponding parting surface: 236, 285, 340 cm² Core pull stroke: 150 mm Completely overhauled die casting machine DAW 80 GO with DataLogic control for processing zinc alloys. Partial extract of the general overhaul: • Upgrade of the machine with a new control cabinet and new operator panel, including replacement of all electrical wiring • Renewal of hydraulics (blocks and valves) • Overhaul of the clamping unit (Detailed list available on request) The machine is equipped with the following options: • Motorised safety door, injection side left • Discharge chute cover on base frame (straight) • Standing operator panel • Discharge chute cover on base frame • Multi-chamber holding and melting furnace with TOC pump • Furnace control cabinet for furnace type Z • Use of water-glycol • Side GO • Wired signal interface for part removal (DISPO10) Ncsdpsyzt D Eefx Aa Ujt • RSD equipment package with switch • Spraymotion 611 E with servo drive, single-circuit • Release agent container TD 20 • Spray bar CR 275 Additional options are available on request.

Kondisi: bekas, Tahun pembuatan: 1992, translate-001 Nedpfjfrvzvsx Aa Uect

Kondisi: bekas, Tahun pembuatan: 1995, Clamping force 2200 kN Clamping plate 755 x 755 mm Tie bar spacing 500 x 500 mm Machine weight approx. 8 t Clamping stroke 430 mm Ejector force 110 kN Ejector stroke 100 mm Mould height 250–600 mm Tie bar diameter 85 mm Injection force 130 kN Injection stroke 175 mm Injection plunger diameter 70, 80, 90 mm Injection volume (DIN 24480) 450, 636, 856 cm³ Specific injection pressure 335, 260, 203 kp/cm² Corresponding parting surface 656, 846, 1078 cm² Decompression stroke 230 mm Used die casting machine DAW 200 S with Datavario control system for use with zinc alloys. Ncjdpovxlufefx Aa Uot Available upon agreement Recommendation from the manufacturer: a general overhaul at an authorized overhaul facility is advised. The scope of refurbishment can be agreed upon as required.

Kondisi: bekas, Tahun pembuatan: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Distance between tie bars: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Injection plunger diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Demolding stroke: 150 mm Ncsdpfetuxmyox Aa Uot Used machine DAW 50 as a basis for complete refurbishment, without control cabinet, furnace, or furnace housing. A general overhaul can be carried out at the manufacturer’s overhaul facility. The scope of the overhaul can be defined as required.

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: fungsi terbatas, Used Oskar Frech DAW 125 with control cabinet and crucible Ncjdpfowywn Eex Aa Ust

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2001, Fungsionalitas: tidak berfungsi, FRECH DAK 720-71 RC Mesin Die Casting, bekas Nomor mesin 440403, gaya penjepit 8000 kN, langkah penjepit 825 mm, gaya ejeksi 364 kN, langkah ejeksi 180 mm, tinggi cetakan 350 hingga 1000 mm, pelat penjepit 1300 x 1300 mm, jarak antar kolom 825 mm, diameter kolom 180 mm, gaya pengecoran maks. 713 kN, langkah pengecoran 600 mm, diameter piston pengecoran 70 hingga 120 mm, volume pengecoran 1539 hingga 4523 cm³, tekanan operasi 160 bar, motor penggerak 45 kW, dengan furnace dosing MELTEC AVDF 1200/5000, tahun 2017, nomor seri sistem, Ncjdpowc Tdzjfx Aa Uot sebagai donor suku cadang Spesifikasi teknis dimensi (p x l x t) kira-kira 8000 x 7500 x 3500 mm berat kira-kira 36000 kg tahun pembuatan 2001

Kondisi: bekas, Tahun pembuatan: 2017, werkstueckgewicht-2000g-waage-giessmaschine-produktion-geprueft- instandgesetzt Nsdpfx Aaey Diaue Uect

Tahun pembuatan: 1988, Kondisi: bekas, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer Ncedefk Smuopfx Aa Uot - Industrial trailer with: single-axle turntable steering - 4 roller tracks, rollers: Ø 65 x 365 mm - Load capacity: max. 6800 kg - Tyres: solid rubber - Trailer coupling - External dimensions: 4760/2730/H585 mm - Dead weight: 1100 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1989, An aluminium die-casting machine is available. Clamping force: 2,200 kN, opening force: 71 kN, max. opening stroke: 430 mm, mold locking: toggle system, shot chamber: cold chamber, orientation: horizontal. Plunger diameter min./max.: 40 mm/70 mm, shot chamber fill volume min./max.: 293 cm³/898 cm³, casting pressure: 1,990 bar, projected area min./max.: 110 cm²/338 cm², performance: 780 cycles/h. Platen dimensions X/Y: 755 mm/755 mm, tie bar spacing: 500 mm/500 mm, mold height min./max.: 250 mm/600 mm, min. mold dimensions X/Y: 296 mm/296 mm. Includes crucible furnace, air blow-off unit, dosing unit, and 4x control cabinets. Documentation available. Njdpfx Aasucfwpj Usct

Kondisi: baru, Tahun pembuatan: 2018, Crucible capacity 420 kg Nedpstv Rlzsfx Aa Uect As-new and unused machine furnace suitable for DAW20A or DAW20S. The Metec furnace, model Z20/120C, is equipped with a durable stainless steel crucible. The crucible holds 420 kg, with a melting capacity of 120 kg/h at a connected load of 21.5 kW. A suitable control cabinet can be custom-built upon request.

Kondisi: baru, Tahun pembuatan: 2020, en Ncjdpfx Aaeiu Smbj Ust

Kondisi: baru, Tahun pembuatan: 2025, Clamping force 240 kN Clamping plate 380x380 mm Distance between tie bars 250x250 mm Machine weight approx. 3.0 t Clamping stroke 180 mm Ejector force 28 kN Ejector stroke 50 mm Mould height 120–300 mm Tie bar diameter 45 mm Injection force 43 kN Injection stroke 85 mm Injection plunger diameter 36, 40, 45 mm Injection volume (DIN 24480) 47, 63, 87 cm³ Specific injection pressure 420, 340, 270 daN/cm² Corresponding parting surface 56, 70, 88 cm² De-moulding stroke 150 mm Machine equipment: 1.0.2 Clamping unit cover at machine base with scales / chute 1.0.3 Small parts cover in machine base 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – Energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1.2 Injection assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling injection system 3.4.5 Simplified injection plunger removal Ncjdpfx Aaox Hp E Ae Ust 3.4.6 Injection plunger stop on return stroke 3.5.2 Electric nozzle and injection pot heating 3.5.3 Plug-in connections for electric nozzle and injection pot heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction device DISPO10 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Control unit with visualization on support arm 6.5.2 Equipment package RSD with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.1 Spray bar CR 155

Kondisi: bekas, Tahun pembuatan: 2007, Used electric sprayer Spraymotion 411 E for use on die casting machines. The device is function-tested by the manufacturer. Ncodpotwfknofx Aa Uot Includes spray and blow bar (SR system with adjustable nozzles) and stand Connection: 24-pin plug Drive module: 400 mm stroke

Kondisi: baru, Tahun pembuatan: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar spacing: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Casting force: 78 kN Casting stroke: 130 mm Plunger diameters: 50, 55, 60 mm Casting volume (DIN 24480): 147, 191, 241 cm³ Specific casting pressure: 396, 327, 275 daN/cm² Corresponding parting surface: 226, 274, 326 cm² Ejector stroke: 220 mm Machine Equipment 1.0.2 Clamping unit cover on base frame with integrated scale/slide 1.1.0 Motorized safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector Advantage Package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of the clamping unit 3.0.1 Casting Assistance Advantage Package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified casting plunger removal Nsdpfxsr Hwf As Aa Uect 3.4.6 Casting plunger stop on return stroke 3.5.2 Electric nozzle and casting chamber heating 3.5.3 Plug-in connections for electric nozzle and casting chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control, 2+6 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operator unit with visualization on support arm 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.3 Spray bar CR 275

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 800 kN, 1 Nedpfjy Uffusx Aa Uect

Kondisi: sangat baik (bekas), Dijual satu set holder alat profesional SK40 AD/B 6×80 sesuai standar DIN 69871. Holder berada dalam kondisi teknis yang baik, lengkap – sebagian sudah terpasang mata bor VHM/HSS dengan berbagai diameter. Diameter penjepitan: Ø6 mm. Panjang: 80 mm. Tipe penguncian: SK40, standar DIN 69871 AD/B. Kondisi: bekas, berfungsi baik, terlihat bekas pemakaian (perubahan warna akibat suhu). Ideal untuk pusat permesinan CNC, mesin milling, dan bor presisi. Ncodpfx Aaexcx Uve Ujt

Kondisi: baru, Dijual: motor listrik berkualitas tinggi merek ternama ATB Austria Model SNB 80 4C 11R Motor satu fase dengan kapasitor, siap pakai, kondisi sangat baik, stok lama. Ideal untuk pompa, kipas angin, mesin, dan aplikasi bengkel. ⚙️ Spesifikasi Teknis Nedpfjyvam Uex Aa Usct Produsen: ATB Model: SNB 80 4C 11R Daya: 0,55 kW Kecepatan: 1370 rpm Tegangan: 230 V Frekuensi: 50 Hz Arus: 4,10 – 4,40 A cos φ: 0,93 Perlindungan: IP55 Kelas isolasi: F Tipe pemasangan: IMB3 (mounting kaki)

Kondisi: baru, ///// HARGA UNTUK 1 UNIT ///// Dijual pompa celup profesional KSB AmaDrainer B 80-40 S – alat berkualitas tinggi yang dirancang untuk bekerja di kondisi berat (air kotor, limbah, dewatering). ✔️ Kondisi: BARU ✔️ Pompa belum pernah digunakan ✔️ Kemasan asli / plastik / dokumentasi ✔️ Paket termasuk kabel + pelampung + pengendali ⚙️ Data teknis: Produsen: KSB (Jerman) Model: AmaDrainer B 80-40 S Daya: 4,0 kW Tegangan: 400V / 3~ / 50 Hz Arus: 8,5 A Ncsdey Abr Hjpfx Aa Uot Tingkat perlindungan: IP68 Kapasitas: hingga 100 m³/jam Putaran: 2800 rpm Kelas isolasi: B Suhu cairan maks.: 40°C Berat: sekitar 65 kg ✅ Aplikasi: dewatering konstruksi stasiun pemompaan air limbah dan air kotor industri sumur dan tangki 📦 Paket meliputi: ✔️ Pompa KSB ✔️ Kabel daya ✔️ Pelampung ✔️ Dokumentasi ✔️ Kemasan asli

Kondisi: bekas, Tahun pembuatan: 1985, Mesin bekas Tahun pembuatan: 1985 Perlengkapan dan data teknis: - Untuk pengeboran konstruksi secara horizontal dan vertikal - Untuk pengeboran deret lubang secara vertikal dengan pola 32 mm - Unit pengeboran vertikal dengan kepala bor poros ganda, dapat diposisikan bebas pada poros indeks - Motor 1,5 kW dengan 1400 rpm Ncodpfswka Hfjx Aa Ust - Motor 1,5 kW dengan 2800 rpm - Kepala bor dengan pengangkat pneumatik - Penjepit material pneumatik - Lebar buka sekitar 850 mm - Termasuk berbagai stop dan mata bor Ketersediaan: segera Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 1990, en-GB: Max. punching force: 600 kN Max. shearing force: 800 kN Punches 27 mm holes in 16 mm steel Shears flat steel up to 400 mm width and 16 mm thickness at the flat steel shear Hydraulic hold-down device at the flat steel shear Large support table on the punching side with stops Further technical data on request Supplied with a selection of punches and dies as required Weight: approx. 2,000 kg Njdpfx Aajtmyife Uoct

Kondisi: bekas, Tahun pembuatan: 1990, ms-001 Nodpfx Aaom T Amus Uoct

Kondisi: baru, Factory-new electric actuator by the renowned German company AUMA. Professional device designed for industrial automation, operation of gates, valves, dampers, and industrial fittings. The actuator is in storage condition – unused. Equipped with a manual emergency handwheel and a robust industrial enclosure with high ingress protection class IP67. Nameplate data – actuator: • Manufacturer: AUMA • Type: SAR 07.5-F10 • Order No.: 194452 • Serial No.: 0402ND90010 • Protection class: IP67 • Output speed: 45 rpm • Closing torque (T Zu): 30–60 Nm • Opening torque (T Auf): 30–60 Nm • Lubrication: F1 Nedpfjy Skm Ejx Aa Usct • Operating temperature: -25°C to +60°C Nameplate data – motor: • Motor type: AD0R 63-4/80 • Part No.: Z011.859 • Serial No.: 0402NM31789 • Power supply: 3~ 400V • Frequency: 50 Hz • Power: 0.37 kW • Current: Y 1.7 A • Cos φ: 0.58 • Operating mode: S4 – 25% ED 1200 c/h • Protection class: IP67 • Motor speed: 1400 rpm • Thermal protection: TH • Insulation class: F Applications: • industrial automation • industrial fittings • gates and dampers • water installations • power engineering • process systems Condition: new / stock Price is for 1 unit.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Nsdsy S Ru Aepfx Aa Uect Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, berat bal: 600 kg, Perlengkapan: dokumentasi / manual, dixi-80-sld-horizontalpresse Njdey Udwpspfx Aa Usct

Kondisi: siap digunakan (bekas), Säulenschwenkkran, Schwenkkran, 80 kg Kran, Gebrauchtmaschine Nodpfxsv R Du Uo Aa Ujct Tragfähigkeit: 125 kg Säulenhöhe: 3800 mm Auslegerlänge / Ausladung: 1650 mm Kettenzug: Demag PMV5-V2F6 Tragfähigkeit: 80 kg Elektrische Daten: 400 V; 0,3 kW; 1,5 A