Beli Gannomat Protec 570 T2 Bk6 bekas (3.214)

Kondisi: baru, Tahun pembuatan: 2026, GANNOMAT "PROTEC 571" (Pengeboran, Alur, Penggilingan) Mesin dasar lengkap dengan konfigurasi standar untuk pengeboran dan pembuatan alur, termasuk: Tambahan perlindungan keselamatan melalui tirai lamella - Prasyarat untuk penggilingan horizontal Lamello P-System - Prasyarat untuk diameter penggilingan > Ø 16 mm, serta untuk penggunaan alat penggilingan multi-bagian Data teknis terperinci tersedia pada lembar data ProTec tipe 0571 Unit kerja dengan: PowerBlock dengan 21 spindle dan 1 mata gergaji alur - 13 spindle bor vertikal - 6 spindle bor horizontal di Y / 2 spindle bor horizontal di X - 1 unit alur di Y Sumbu pengeboran ke-4 di Y Ukuran dan berat benda kerja - Lebar benda kerja (X): min. 60 mm / maks. 1000 mm - Ketebalan benda kerja (Z): min. 6 mm / maks. 60 mm - Panjang benda kerja (Y): min. 250 mm dalam mode throughput maks. 5600 mm panjang benda kerja yang dapat diprogram di perangkat lunak - Berat benda kerja: maks. 75 kg 1 Unit penggilingan Profit HSK63F dengan majalah 3 posisi untuk pergantian alat otomatis, Motor 5,5 kW (S1), 1000-18000 rpm dengan inverter frekuensi, rotasi kanan dan kiri, untuk holder alat HSK63F dengan collet 462E/OZ25, panjang pisau hingga 130 mm Termasuk opsi 1 Meja rol 765 mm (sumbu Y), dapat dilipat, untuk bagian depan mesin, lebar 500 mm 1 Meja rol 765 mm (sumbu Y), dapat dilipat, untuk bagian belakang mesin, lebar 500 mm 1 Stopper bantu 600 mm dengan rol terintegrasi untuk meja rol 1 PERKAKAS: Set bor untuk ProTec Itsdpszgfwljfx Aa Dsi 1 Mata alur HW Ø 125/30 mm, lebar alur (SB) 4 mm, Z=12, LI, dari Leitz 1 Perkakas untuk unit penggilingan Profit HSK63F dan HSK63F dengan majalah 3 posisi, dengan collet 462E untuk diameter tangkai hingga 25 mm, set HSK dan pisau 1 Set pemasangan HSK 1 Perangkat pemasangan HSK63F, pengoperasian sangat mudah dan sangat nyaman dengan sistem penjepitan rol, tidak perlu penjepitan atau penguncian, dipasang pada dasar yang kokoh atau di meja kerja, 1 Kunci kait untuk collet HSK63F 462E, 1 Distribusi ekstraksi Ø 160 mm / Ø 80-80-80 mm, jarak 196 mm 1 Perangkat tekanan terhadap atas 1 Pencahayaan LED di ruang kerja mesin 1 Perkakas untuk penggilingan vertikal Lamello P-System Mesin dengan perlengkapan sangat baik termasuk banyak bor dan perkakas Mesin baru dengan garansi penuh. Mesin dapat dilihat dan didemonstrasikan di showroom kami. Harga khusus dapat diberikan untuk mesin pameran kami!!!!!

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: 390.829, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 6.700 h, tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, panjang benda kerja (maks.): 5.600 mm, lebar benda kerja (maks.): 1.000 mm, tinggi benda kerja (maks.): 60 mm, berat benda kerja (maks.): 75 kg, jumlah sumbu: 1, jumlah slot dalam magazin alat: 1, jenis aktuasi: listrik, tinggi total: 1.409 mm, panjang total: 1.484 mm, lebar total: 2.325 mm, lebar meja: 1.000 mm, Perlengkapan: Penandaan CE, Due to the acquisition of a new machine, our Gannomat Protec 571 CNC machine, purchased new in 2018, is now for sale. The Gannomat Protec CNC machining center is a high-precision woodworking machine designed for efficient drilling, milling, and grooving operations. Engineered for versatility and accuracy, it is ideal for processing furniture components and panels. With its advanced automation and robust construction, it delivers repeatable results and time savings in production. This machining center is particularly suitable for workshops aiming to optimize productivity and achieve seamless machining processes. Technical data: Workpiece width X: 60 - 1000 mm Workpiece length Y: 250 - 5600 mm Workpiece height Z: 6 - 60 mm Workpiece weight: 75 kg Itsdpfxjzhrdze Aa Dji High-speed processing: 21 drilling spindles Stable grooving unit: 8.3 mm saw blade width Powerful milling unit: 5.5 kW (S1), with reversible rotation Compact footprint: Less than 3.3 m² Included with the machine: - Drilling tools and 1 HSK63 chuck, plus tool for machining required in a modern joinery workshop. Optional software: - Gannomat Editor office software: EUR 1,000 (installation and activation by Gannomat, subject to an additional charge) - DXF postprocessor for efficient workflow: EUR 1,000 (installation and activation by Gannomat, subject to an additional charge) ATTENTION: Low operating hours The price of the machine does not include VAT.

Kondisi: bekas, Tahun pembuatan: 2023, New demonstration machine! List price: €86,567 net Base machine, complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the ProTec Type 0571 data sheet. Machining unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1,000-20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm Information: MultiUnit machining head with PowerBlock 21/23 spindles, grooving saw, and optional Profit milling unit Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Power supply TN or TT Pneumatic connection 7 bar (102 psi) On machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory side To machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side Supply line, hose inner diameter min. 12 mm Compressed air consumption: continuous: approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction connection 3x extraction ports Ø 80 mm Extraction speed 30 m/sec - measured at extraction port Extraction requirement min. approx. 2500 m³/h Machine weight approx. 1650 kg (with options!) Machine installation location: The ProTec can generally be anchored to the floor. A concrete floor (or foundation) is required (at least at the four corners/feet of the machine). Equipment: Protec 571 Profit HSK63F with 3-position magazine Folding roller table 765 mm (Y-axis), for machine front, width 500 mm Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm Auxiliary stop 600 mm with integrated rollers for roller tables Additional safety equipment via slat curtain Precondition for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec, shank Ø 10 mm with clamping surface (JSO) 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW dowel drill 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R HW grooving cutter Ø 125/30 mm Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and by arrangement Tool holder HSK63 F 3.00 pcs For 462E/OZ25 collet Collet 462E/OZ25 for shank 25 mm, 3.00 pcs. Indexable insert end mill Z1+1 1.00 pc HW with indexable insert spiral drill Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert spiral drill, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (the adapter 0571WAB10 must be ordered separately). Decorative grooving cutter HW indexable inserts Z1 1.00 pc D Ø 17 mm, d Ø 10 mm, L1 Iodpfxow Tfzfe Aa Doti

Kondisi: bekas, Tahun pembuatan: 2019, Machine construction type: Throughfeed/return feed Working dimensions in X direction: 1,300 mm Iodsymp N Tepfx Aa Deti Working dimensions in Y direction: 5,600 mm Working thickness (Z dimension): 60 mm Number of main spindles: 1 unit Main spindle power: 5.5 kW Main spindle speed: 1,000-20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool storage positions: 3 units Back wall groove unit: fixed in Y direction Vertical drilling spindles – in X direction: 3 units Vertical drilling spindles – in Y direction: 10 units Horizontal drilling spindle in X direction: 2 units Horizontal drilling spindle in Y direction: 6 units Control type: PC control Operating system: Windows QWERTY keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Online connectivity available: Yes Table design: fixed, smooth table Central lubrication: automatic Tools: Various tools Operating hours: 920 h Weight approx.: 1,800 kg Extraction diameter: 3 x 80 mm Machine has been modernized at the factory, pressure beam and control technology from model 0572! Storage location: Customer

Kondisi: baru, Tahun pembuatan: 2026, Gannomat ProTec - CNC Throughfeed Machine for Drilling, Grooving, and Milling Operations Itjdpfx Ajbiplrsa Dei Brief Description: • Compact footprint, less than 3.3 m² • Handles both large (1000 x 5600 x 60 mm) and small (60 x 250 x 6 mm) workpieces • Gentle material processing via air nozzles • High accuracy through dual laser measurement and workpiece alignment • Fast processing with 21/23 drilling spindles • 21/23 drilling spindles eliminate setup times • Robust grooving unit for saw blades up to 8.3 mm width • Powerful milling unit 5.5 kW (S1), optional • Automatic tool changer for milling unit, optional CNC-controlled DRILLING, GROOVING, MILLING on under 3.3 m² with high processing precision and zero setup time - that is the GANNOMAT ProTec. TECHNOLOGY: The solid processing unit comes equipped with 13 vertical drilling spindles, 8 double horizontal drilling spindles (6Y & 2X), 1 grooving saw on the Y-axis, and 1 milling unit. This tool configuration means all common drills/tools can be held in a single setup and simply selected as needed. This CNC machining center operates from below and can be run in both throughfeed and return-feed modes for operator convenience. Steel support tables with air nozzles are the standard for horizontal drilling, and, in combination with solid workpiece clamps and the additional fourth axis on the drill head, enable very precise drilling. A contactless laser sensor detects the actual workpiece edges (top and bottom), allowing for automatic correction/adjustment of the drilling program. APPLICATION RANGE: ProTec delivers high-tech engineering and application, designed both as a CNC entry-level model for small to medium-sized businesses and as a secondary machine to a standard machining center to prevent production bottlenecks. APPLICATION AREAS: Universal applicability and significant customer benefits through high profitability are the key advantages of the GANNOMAT ProTec. Specifically developed for maximum flexibility from batch size one and series production, as well as for high precision with zero setup time. The GANNOMAT ProTec is designed for complete machining of cabinet sides, cabinet bottoms, rails, back panels, furniture doors, drawer sides, drawer fronts, countertops, frame parts, tables, sliding doors, templates, and more. For example, dowel holes, line boring, holes for mounting plates, connectors, drawer runners, fittings, cabinet hangers, handle holes, lock bores, etc. can be drilled. With the grooving unit, back panel grooves (also rebates) or grooves in drawer fronts can be produced. The milling unit can perform diverse routing operations such as (examples): pockets of any kind, tambour door tracks, spot and cable apertures, handle recesses, plinth cut-outs, routing for shell handles and furniture locks, lock recesses, vent openings in doors, kitchen worktop joints, as well as partial pocket routings in kitchen worktops, furniture frame doors, and more. Another application of the ProTec is milling of standard contours that are conventionally produced with templates and manual routers. Material types such as particleboard, solid wood, multi-layer boards, lightweight panels, etc. can be efficiently processed with the ProTec.

Kondisi: baru, Tahun pembuatan: 2026, kapasitas angkut: 2.000 kg, Perlengkapan: kendali jauh kaki, Meja putar pengelasan 2000 kg, tinggi dapat disesuaikan secara hidraulis Kecepatan 0,05 hingga 0,8 putaran/menit Diameter meja 1200 mm Kemiringan 0 hingga 120° Penyesuaian tinggi total sekitar 700 mm Iodpfxszk Rkfj Aa Doti Penyesuaian tinggi pada posisi cakram vertikal hingga bagian tengah 960 mm ~ 1910 mm Dimensi pada posisi cakram horizontal 1200 mm hingga 1900 mm

Kondisi: baru, Tahun pembuatan: 2025, kapasitas angkut: 2.000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2000 kg Handheld remote control with digital display Double foot control Height approx. min. 800 mm tilted to center, max. height 1400 mm Minimum horizontal height: 1000 mm Faceplate diameter: 1200 mm Minimum tilt angle: 135° Rotation speed: 0.05 to 0.9 rpm Motor power: 3 kW Iedpfxoncfvhj Aa Doti

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 2.000 kg, Protec KT 2000 kg load capacity Capacity horizontal: 2000 kg Capacity tilted: 2000 kg Iedpfxjwk Hzpe Aa Dsti Clamping plate diameter: 1300 mm Height (horizontal): 1250 mm Height (tilted to center): 1080 mm Length: 1600 mm

Kondisi: baru, 2000 kg load capacity welding positioner, height-adjustable very robust construction Infinitely variable speed control from 0.05 to 0.7 rpm Turntable diameter: 1200 mm Tilting angle up to 120° Total height adjustment: 600 mm Height adjustment range: 1450 mm to 2050 mm Minimum height (horizontal): 1350 mm, tilted (up to center): 1200 mm Itodpfodvn E Eex Aa Dsi Maximum height (horizontal): 1850 mm, tilted (up to center): 1700 mm Hand and foot remote control

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 2.000 kg, Protec KT, load capacity 2000 kg Capacity horizontal: 2000 kg Capacity tilted: 2000 kg Stepless speed adjustment from 0.05 to 0.5 rpm (can be modified upon request for an additional charge) Equipped with dual foot switch control Handheld remote control with digital display 380 V Clamping plate diameter: 1300 mm Height (horizontal): 1250 mm Height (tilted to center): 1080 mm Length: 1600 mm Itodpswtrpkefx Aa Dji

Tahun pembuatan: 2022, Kondisi: seperti baru (mesin pameran), 2,000 kg load capacity welding positioner, height-adjustable Complete set Itedpfsk Adhuex Aa Dei Continuously variable speed control from 0.05 to 0.7 rpm Turntable diameter: 1,200 mm Tilting range: 0 to 120° Height adjustment from 1,450 mm to 2,050 mm Hand and foot remote control

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Tank container: Kontainer kotak baja 20 kaki dengan tangki polietilen terintegrasi berkapasitas 25.700 liter (ketebalan dinding 1 cm). Hanya untuk produk non-berbahaya (air, minyak, alkohol, dll), bukan untuk bahan ADR. Suhu sampai -40°C. 1. Kondisi: baru, belum pernah digunakan, dengan plakat CSC yang masih berlaku 2. Volume: 25.700 liter 3. Katup dekompresi 4. Tekanan kerja penutup: 7 Bar 5. Suku cadang termasuk: katup dekompresi, katup keluar, penutup mangkuk 6. Warna pilihan sudah termasuk (jika pre-order) 7. Logo perusahaan sudah termasuk (jika pre-order) 8. Tangki bisa dilepas 9. Transportasi: Penawaran pengiriman gratis & tidak mengikat (termasuk unloading jika diinginkan) – cukup informasikan kode pos. 10. Foto asli 11. Pre-order Itjdpfjzmf Dfjx Aa Dsi Kami menantikan kontak Anda! NAUTEXA GmbH

Kondisi: baru, Tahun pembuatan: 2025, Protec KT 3000 HV, hydraulically height-adjustable Load capacity 3000 kg Handheld remote control with digital display Double foot pedal control Height approx. min. 700 mm tilted to center, max. height 1400 mm Faceplate diameter 1400 mm Isdpfoifw Hdjx Aa Doti Tilt angle min. 135° Speed 0.05 to 0.9 rpm Motor power 3 kW

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella Body Press with Rapid Traverse Technical Data: Lamella body press from our showroom Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm, depth 700 mm - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with industry-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set via a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beam min. 500 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Includes option: Isdpjy Egz Sofx Aa Dsti Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be switched off for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree carcasses. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is available for immediate delivery from our showroom. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process Itsdpjw Sgnksfx Aa Dei - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: baru, Tahun pembuatan: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard configuration according to price list 01/19/D with: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed motor, 1400/2800 rpm, 1.5 kW - Line laser with holder - Boring unit, continuously rotatable from the front (65°-0°-65°) - Positioning adjustment via digital counter - Pneumatic two-level positioning adjustment (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm division, with central detent and cross adjustment 320 mm Itjdpfx Aajxdttpe Dei - Complete stop system consisting of: 1 center stop and 1 stop for extra wide frames 1 stop bar approx. 850 mm, reversible from left to right 2 flip stops - Drop-down mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Dust extraction funnel, dust-tested, Ø 80 mm Double mitre stop, adjustable 0°-60° Pneumatic X-axis clamping with on/off switch on the indexing lever Pair of auxiliary workpiece supports, swiveling (left and right) Clamping column adjustable to the front Undercarriage with 4 wheels for easy movement of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Stair baluster drill bit Ø 25 mm made of chrome steel with centering point Available: at short notice

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Fully equipped in standard version with: - Fully automatic electronic control system with program selector switch: RINSING-GLUING-GLUING/INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length monitoring with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with viscosity between 150 and 350 mPas - Stepless electronic glue quantity adjustment with potentiometer by time-preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the glue system, with EasyClean function button (automatic cleaning program for the glue hose and glue nozzle via spray funnel and wastewater collecting tank) - Control lamp for glue level indicator in the glue container - 1 stainless steel container for 5 kg of glue, as well as 1 stainless steel container for 5 l of water for flushing/cleaning - 4 wheels for moving the machine Including 1 gun for dowels Ø 8 mm, dowel length 25–40 mm Driving projection 7–20 mm Air connection: 6 bar Itjdpfxedwi Rks Aa Dji Price ex stock 54634 Bitburg - available immediately -

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration according to price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3-26 mm. Incl. collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic position adjustment for 2 levels (0-100 mm) - Max. drilling depth 150 mm - Precision indexing rail with 12 mm pitch featuring: - Center detent and 320 mm cross adjustment - 2 pneumatic safety clamping cylinders - Complete stop system consisting of: 1 center stop and 1 stop for oversize frames 1 stop rod approx. 850 mm long (can be mirrored from left to right) 2 flip stops - Lowerable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, tested for dust Central 45° mitre stop Pair of swiveling workpiece support arms (left and right) Drilling head mount 3-spindle drilling head, spacing 32 mm (can be rotated 90°) Iedpfexdttisx Aa Deti Chassis with 4 wheels for easy machine movement Available: Short notice - immediately -

Kondisi: baru, Tahun pembuatan: 2025, CNC-controlled boring, gluing, and dowel inserting machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal boring unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, gluing, and dowel inserting station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis controlled by NC, working length 700 mm, max. rapid traverse speed 95 m/min - Z-axis adjustable manually via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill bit length TL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure through glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp indicating residual glue level in the glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pc. start buttons for individual operation with 1 or 2 workpieces - 2 pc. pneumatic angled clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC, incl. soft PLC type Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, freely programmable boring distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and operation optimization, two work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point offset, programmable work lists, clear-text fault diagnosis - Integrated options: Itedpfxsw Sgm Ho Aa Dji - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, item no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before start of the operating program drilling/gluing/dowel insertion. E.C.S. for 1 pc. glue nozzle, item no. 0471-Z010 - 1 single-spindle vertical boring unit, drilling from above, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) adjustable manually via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) item no. 0471-0830 - 4 vertical angled clamping cylinders 10° with holder, additionally, item no. 0470-0850 Available: at short notice

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Iedsiidm Nspfx Aa Doti Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, kapasitas angkut: 3.000 kg, Meja putar pengelasan 3000 kg, ketinggian dapat disesuaikan secara hidraulis Kecepatan 0,05 hingga 0,8 putaran/menit Diameter meja 1200 mm Kemiringan 0 hingga 120° Rentang penyesuaian ketinggian total sekitar 700 mm Penyesuaian ketinggian pada posisi cakram tegak lurus hingga bagian tengah Itedezk Rhwopfx Aa Dji 960 mm hingga 1910 mm Dimensi pada posisi cakram horizontal 1200 mm hingga 1900 mm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 5.000 kg, Perangkat pemutar rantai 5 To, kapasitas angkut berfungsi penuh. Itodpfszk Rb Djx Aa Dji

Kondisi: baik (bekas), kapasitas angkut: 3.000 kg, Protec Reiss perangkat putar pengelasan, opsional dengan meja berlubang, ukuran sesuai permintaan Dapat diputar 360° Pengaturan sumbu sesuai keinginan Dapat digunakan tanpa meja berlubang untuk komponen pelanggan sendiri atau dengan meja berlubang Tinggi meja bagian atas: 1,16 m Itsdpoziyh Dsfx Aa Dei Kami memiliki beberapa perangkat putar ini dalam stok Biaya tambahan untuk meja berlubang baru: €2.600 (2,0 x 1,0 x 0,2 m)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Motors: 2 x 1.85A, 50Hz, 380V, 2800 rpm Operating air pressure: 6 bar 30 spindles, mount diameter 10 mm Combination foot switch Emergency stop switch Main switch Manual height adjustment Manual lateral adjustment Ijdsv Nptmepfx Aa Djti

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Power supply: 380V, 3.3A Motor output: 1.1 kW, 2800 rpm automatic pneumatic control with control panel Drilling head with 23 spindles, 32 mm pitch Adjustable drilling depth Drill shank: 10 mm Position adjustment: 5–60 mm Clamping height: 80 mm Pass-through width: 800 mm Dimensions: 1200 x 900 mm Weight: approx. 400 kg Includes: Iodpfjq Auwtjx Aa Deti 1x adjustable gauge for line drilling 1x adjustable gauge for side stop 1x stop ruler, 1500 mm 1x stop ruler, 2000 mm