Beli Gannomat Red Baron & Basica Variabel bekas (3.066)

Kondisi: baru, Tahun pembuatan: 2026, Gannomat mesin bor dan press otomatis bersifat independen dari produsen fitting dan dirancang untuk pengeboran serta pemasangan fitting yang presisi. Ketahanan, umur panjang, dan kemudahan pengoperasian menjadi ciri khas mesin bor engsel universal kami.\n\nGambaran singkat:\n• Tidak bergantung pada distributor dan produsen fitting\n• Gearbox bor presisi dengan roda gigi baja dan kopling baja\n• Penggunaan universal: engsel cangkir, pengeboran seri lubang, konektor, pengeboran gagang dan tembus, pengeboran untuk rel laci, dan lain-lain\n• Batas ayun yang kokoh dan stabil\n• Jarak antara bantalan depan dan spindel bor hingga 300 mm (Basica Variabel) Iedsdx Axuspfx Aa Djid

Kondisi: baru, Tahun pembuatan: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard configuration according to price list 01/19/D with: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed motor, 1400/2800 rpm, 1.5 kW - Line laser with holder - Boring unit, continuously rotatable from the front (65°-0°-65°) - Positioning adjustment via digital counter - Pneumatic two-level positioning adjustment (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm division, with central detent and cross adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for extra wide frames 1 stop bar approx. 850 mm, reversible from left to right 2 flip stops - Drop-down mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Dust extraction funnel, dust-tested, Ø 80 mm Double mitre stop, adjustable 0°-60° Pneumatic X-axis clamping with on/off switch on the indexing lever Iiodpfxexdttpj Aa Ded Pair of auxiliary workpiece supports, swiveling (left and right) Clamping column adjustable to the front Undercarriage with 4 wheels for easy movement of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Stair baluster drill bit Ø 25 mm made of chrome steel with centering point Available: at short notice

Kondisi: baru, Tahun pembuatan: 2026, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Iodpfx Aaow Sgnko Dsid Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella Body Press with Rapid Traverse Technical Data: Lamella body press from our showroom Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm, depth 700 mm - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with industry-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set via a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beam min. 500 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Includes option: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be switched off for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree carcasses. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is available for immediate delivery from our showroom. Iodpfx Aoy Egz Sja Deid Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, NEW - Manufacturer: Ganner Gannomat Model: SELEKTA 253 220 V, 1 Ph, 50 Hz Iisdpfx Aaodwi Rke Dsd Fully equipped in standard version with: - Fully automatic electronic control system with program selector switch: RINSING-GLUING-GLUING/INSERTING - Dowel feed via electronic vibratory feeder with potentiometer for stepless adjustment of dowel feed rate - Automatic dowel diameter and dowel length monitoring with Auto-DL-Select system (automatic ejection of incorrect dowel lengths +/- 5 mm into the collection container) - Closed glue system with 6 bar glue pressure via glue nozzle for adhesives with viscosity between 150 and 350 mPas - Stepless electronic glue quantity adjustment with potentiometer by time-preselection through electronic control - Selector switch GLUE/WATER for flushing/cleaning the glue system, with EasyClean function button (automatic cleaning program for the glue hose and glue nozzle via spray funnel and wastewater collecting tank) - Control lamp for glue level indicator in the glue container - 1 stainless steel container for 5 kg of glue, as well as 1 stainless steel container for 5 l of water for flushing/cleaning - 4 wheels for moving the machine Including 1 gun for dowels Ø 8 mm, dowel length 25–40 mm Driving projection 7–20 mm Air connection: 6 bar Price ex stock 54634 Bitburg - available immediately -

Kondisi: baru, Tahun pembuatan: 2025, CNC-controlled boring, gluing, and dowel inserting machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal boring unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, gluing, and dowel inserting station for dowels Ø 8 mm, dowel length 25–50 mm Ijdow Sgm Hspfx Aa Deid - Fully automatic, electronically controlled central lubrication - X-axis controlled by NC, working length 700 mm, max. rapid traverse speed 95 m/min - Z-axis adjustable manually via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill bit length TL 70 mm) is automatically set with insertion projection - Closed glue system with 6 bar glue pressure through glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity continuously adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp indicating residual glue level in the glue container - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pc. start buttons for individual operation with 1 or 2 workpieces - 2 pc. pneumatic angled clamping cylinders 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC, incl. soft PLC type Beckhoff TWINCAT, operating temperature range 0–50°C, TFT industrial display 15" capacitive touchscreen, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, freely programmable boring distances with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and operation optimization, two work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point offset, programmable work lists, clear-text fault diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, item no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots before start of the operating program drilling/gluing/dowel insertion. E.C.S. for 1 pc. glue nozzle, item no. 0471-Z010 - 1 single-spindle vertical boring unit, drilling from above, 0.65 kW (3,000/5,000/8,000 rpm), position (Y) adjustable manually via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) item no. 0471-0830 - 4 vertical angled clamping cylinders 10° with holder, additionally, item no. 0470-0850 Available: at short notice

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration according to price list 01/22/D with: - Precision collet chuck for ER 40 collets, diameter 3-26 mm. Incl. collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic position adjustment for 2 levels (0-100 mm) - Max. drilling depth 150 mm - Precision indexing rail with 12 mm pitch featuring: - Center detent and 320 mm cross adjustment - 2 pneumatic safety clamping cylinders - Complete stop system consisting of: 1 center stop and 1 stop for oversize frames Isdpfexdttiox Aa Deid 1 stop rod approx. 850 mm long (can be mirrored from left to right) 2 flip stops - Lowerable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) Extraction funnel Ø 80 mm, tested for dust Central 45° mitre stop Pair of swiveling workpiece support arms (left and right) Drilling head mount 3-spindle drilling head, spacing 32 mm (can be rotated 90°) Chassis with 4 wheels for easy machine movement Available: Short notice - immediately -

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg Ijdpfxsiidm Ns Aa Deid - Immediately available -

Kondisi: bekas, Gearbox, bevel gearbox, worm gearbox, roller conveyor gearbox - Manufacturer: Düspohl, gearbox with rotary encoder - Gear ratio: i = ? - Hollow shafts: Ø 32 x 80 mm - Shaft center distance: 197 to 206 mm, for dimensions see technical drawing in photo Iedpfx Aot H Tqyea Dsid - Encoder: Red Lion Controls 4601200 - Dimensions: 1120/100/H155 mm - Weight: 28 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1990, Motors: 2 x 1.85A, 50Hz, 380V, 2800 rpm Operating air pressure: 6 bar 30 spindles, mount diameter 10 mm Combination foot switch Emergency stop switch Main switch Manual height adjustment Manual lateral adjustment Iedsv Nptmopfx Aa Dsid

Kondisi: baik (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, Power supply: 380V, 3.3A Motor output: 1.1 kW, 2800 rpm automatic pneumatic control with control panel Drilling head with 23 spindles, 32 mm pitch Adjustable drilling depth Drill shank: 10 mm Iodpfoq Auwtex Aa Djid Position adjustment: 5–60 mm Clamping height: 80 mm Pass-through width: 800 mm Dimensions: 1200 x 900 mm Weight: approx. 400 kg Includes: 1x adjustable gauge for line drilling 1x adjustable gauge for side stop 1x stop ruler, 1500 mm 1x stop ruler, 2000 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1982, Fungsionalitas: berfungsi sepenuhnya, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW air connection 6 bar fully automatic pneumatic control with foot pedal additional switch for chip removal program T-drilling head with 7+2 drilling spindles, 32 mm pitch shank diameter of drill bits 10 mm Iiedpfev Npw Ejx Aa Djd 90° swiveling with locking mechanism undercarriage/mobile base

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Drilling and press-in machine for all types of furniture fittings, line and group hole drilling machine in System 32. Power supply: 400V, 0.75kW Spindle speed: 2800 rpm Stop ruler: 960 mm 2x swivel stops For drill bits with 10 mm shank diameter Maximum workpiece thickness: 40 mm 1x 7-spindle drilling head for line boring with 32 mm pitch, with integrated positioning pins Manual feed Base frame included Ijdpeumw Sbjfx Aa Doid Available at extra cost: Olive drilling head: €450.00 Mepla drilling head with pressing die: €550.00 Hettich drilling head with pressing die: €550.00

Kondisi: baru, Tahun pembuatan: 2026, GANNOMAT "PROTEC 571" (Pengeboran, Alur, Penggilingan) Mesin dasar lengkap dengan konfigurasi standar untuk pengeboran dan pembuatan alur, termasuk: Tambahan perlindungan keselamatan melalui tirai lamella - Prasyarat untuk penggilingan horizontal Lamello P-System - Prasyarat untuk diameter penggilingan > Ø 16 mm, serta untuk penggunaan alat penggilingan multi-bagian Data teknis terperinci tersedia pada lembar data ProTec tipe 0571 Iisdpezgfwlefx Aa Ded Unit kerja dengan: PowerBlock dengan 21 spindle dan 1 mata gergaji alur - 13 spindle bor vertikal - 6 spindle bor horizontal di Y / 2 spindle bor horizontal di X - 1 unit alur di Y Sumbu pengeboran ke-4 di Y Ukuran dan berat benda kerja - Lebar benda kerja (X): min. 60 mm / maks. 1000 mm - Ketebalan benda kerja (Z): min. 6 mm / maks. 60 mm - Panjang benda kerja (Y): min. 250 mm dalam mode throughput maks. 5600 mm panjang benda kerja yang dapat diprogram di perangkat lunak - Berat benda kerja: maks. 75 kg 1 Unit penggilingan Profit HSK63F dengan majalah 3 posisi untuk pergantian alat otomatis, Motor 5,5 kW (S1), 1000-18000 rpm dengan inverter frekuensi, rotasi kanan dan kiri, untuk holder alat HSK63F dengan collet 462E/OZ25, panjang pisau hingga 130 mm Termasuk opsi 1 Meja rol 765 mm (sumbu Y), dapat dilipat, untuk bagian depan mesin, lebar 500 mm 1 Meja rol 765 mm (sumbu Y), dapat dilipat, untuk bagian belakang mesin, lebar 500 mm 1 Stopper bantu 600 mm dengan rol terintegrasi untuk meja rol 1 PERKAKAS: Set bor untuk ProTec 1 Mata alur HW Ø 125/30 mm, lebar alur (SB) 4 mm, Z=12, LI, dari Leitz 1 Perkakas untuk unit penggilingan Profit HSK63F dan HSK63F dengan majalah 3 posisi, dengan collet 462E untuk diameter tangkai hingga 25 mm, set HSK dan pisau 1 Set pemasangan HSK 1 Perangkat pemasangan HSK63F, pengoperasian sangat mudah dan sangat nyaman dengan sistem penjepitan rol, tidak perlu penjepitan atau penguncian, dipasang pada dasar yang kokoh atau di meja kerja, 1 Kunci kait untuk collet HSK63F 462E, 1 Distribusi ekstraksi Ø 160 mm / Ø 80-80-80 mm, jarak 196 mm 1 Perangkat tekanan terhadap atas 1 Pencahayaan LED di ruang kerja mesin 1 Perkakas untuk penggilingan vertikal Lamello P-System Mesin dengan perlengkapan sangat baik termasuk banyak bor dan perkakas Mesin baru dengan garansi penuh. Mesin dapat dilihat dan didemonstrasikan di showroom kami. Harga khusus dapat diberikan untuk mesin pameran kami!!!!!

Kondisi: bekas, Tahun pembuatan: 2000, Jumlah spindle baris lubang: 11 Iodpfxjxc Hi Uo Aa Djid Jumlah spindle horizontal: 3 Kepala bor engsel cangkir: ya, Blum Jarak bor: 32mm Daya listrik: 2,2kW Unit bor: dapat diputar

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: 390.829, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 6.700 h, tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, panjang benda kerja (maks.): 5.600 mm, lebar benda kerja (maks.): 1.000 mm, tinggi benda kerja (maks.): 60 mm, berat benda kerja (maks.): 75 kg, jumlah sumbu: 1, jumlah slot dalam magazin alat: 1, jenis aktuasi: listrik, tinggi total: 1.409 mm, panjang total: 1.484 mm, lebar total: 2.325 mm, lebar meja: 1.000 mm, Perlengkapan: Penandaan CE, Due to the acquisition of a new machine, our Gannomat Protec 571 CNC machine, purchased new in 2018, is now for sale. The Gannomat Protec CNC machining center is a high-precision woodworking machine designed for efficient drilling, milling, and grooving operations. Engineered for versatility and accuracy, it is ideal for processing furniture components and panels. With its advanced automation and robust construction, it delivers repeatable results and time savings in production. This machining center is particularly suitable for workshops aiming to optimize productivity and achieve seamless machining processes. Iijdpfx Aajzhrdze Djd Technical data: Workpiece width X: 60 - 1000 mm Workpiece length Y: 250 - 5600 mm Workpiece height Z: 6 - 60 mm Workpiece weight: 75 kg High-speed processing: 21 drilling spindles Stable grooving unit: 8.3 mm saw blade width Powerful milling unit: 5.5 kW (S1), with reversible rotation Compact footprint: Less than 3.3 m² Included with the machine: - Drilling tools and 1 HSK63 chuck, plus tool for machining required in a modern joinery workshop. Optional software: - Gannomat Editor office software: EUR 1,000 (installation and activation by Gannomat, subject to an additional charge) - DXF postprocessor for efficient workflow: EUR 1,000 (installation and activation by Gannomat, subject to an additional charge) ATTENTION: Low operating hours The price of the machine does not include VAT.

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.670 mm, panjang total: 5.000 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 2.750 kg, tinggi benda kerja (maks.): 50 mm, Gannomat Matrix 250/70 We are offering this used NC-controlled multi-spindle drilling, gluing, and dowel-inserting machine, year of manufacture 2003. Manufacturer: Gannomat Model: Matrix 250/70 Year of manufacture: 2003 - Flat side processing possible up to diameter 35 mm - End face processing possible: drilling 6, 8, 10, 12 mm; gluing and dowel insertion with diameter 8 mm - Dowel length from 25 to 60 mm - X-axis length: 2,500 mm Y-axis length: 700 mm - Maximum workpiece thickness: 50 mm Isdpfxezcf Udo Aa Djid - Including mitre stop - With center stop, a 4-field configuration is possible - Including 16 vacuum cups and 8 clamps as shown in the pictures - Including vacuum pump - Simple programming directly at the machine; drilling left and right parts is easily possible without the need for extra programming – just position the workpiece against the relevant stop during operation. The machine is currently still in use. However, we utilize it only as a drilling machine and do not use the dowel inserting or gluing functions. Inspection is possible by appointment. If you have any questions or need further information, feel free to send us a message.

Kondisi: bekas, Tahun pembuatan: 2017, Jumlah spindel bor: 21 buah Jarak antar spindel: 32 mm Pemasangan mata bor: Permukaan penjepit dia. tangkai bor: 10 mm Pengoperasian: pedal kaki Peralatan: Ya Arah pengeboran: dari bawah & dari sisi depan Pengayunan: manual Sudut pengayunan: hanya 0° atau 90° Tinggi bebas maks.: 80 mm Iodpfx Aasihghre Djid Lebar bebas maks.: 750 mm Jumlah penjepit material: 3 buah Jenis penjepitan material: pneumatik Desain: stasioner Sistem pembatas: hanya untuk seri konstruksi Berat sekitar: 400 kg Daya motor: 1,5 kW Diameter saluran hisap: 120 mm Lokasi penyimpanan: di pelanggan

Kondisi: bekas, Tahun pembuatan: 2024, New demonstration machine! List price: €32,665,- complete in standard configuration including: Sturdy, torsion-resistant steel frame, welded and bolted construction – Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements – Lamella pressure beams with proven gap compensation (Ganner system) for tightly compressed carcass joints – Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick, coated support plates – Continuous pressure surface with 95 mm height on the lower vertical pressure beam – Electromotoric adjustment of both pressure beams via precision trapezoidal lead screws (with increased lead and run-out accuracy) and high-performance travelling nuts with grease reservoirs – Pressing action performed electromotorically via 2 separate worm gear motors (2 x 0.75 kW) – Pressing force for the pressure beams is infinitely variable electronically via 2 potentiometers and regulated by a frequency inverter, making the pressing force control entirely wear-free – Horizontal pressure beam pressing force min. 500 daN (kg), steplessly up to max. 2200 daN (kg) – Vertical pressure beam pressing force min. 300 daN (kg), steplessly up to max. 2200 daN (kg) – Press and adjustment speed of the pressure beams with fine positioning selectable by three-stage switch: 5 / 10 / 25 mm/second – Extremely simple operation via 6 separate push buttons, 8 motion sequences selectable via controller – Freely adjustable pressing time preselection with automatic opening, 0-30 min (switchable to seconds or hours) – Working height/loading height: 300 mm – Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm; Weight: approx. 1800 kg net; Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m – Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: Rapid-traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid-traverse speed 50 mm/sec. Sensors can be disabled for special components. 1 set of machine feet (working height 500 mm) Location: Iiodeuf Hx Hopfx Aa Dod

Kondisi: bekas, Tahun pembuatan: 2023, New demonstration machine! List price: €86,567 net Base machine, complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the ProTec Type 0571 data sheet. Machining unit equipped with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1,000-20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for HSK63F tool holder with 462E/OZ25 collet, cutter length up to 130 mm Information: MultiUnit machining head with PowerBlock 21/23 spindles, grooving saw, and optional Profit milling unit Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Power supply TN or TT Pneumatic connection 7 bar (102 psi) On machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory side To machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side Supply line, hose inner diameter min. 12 mm Compressed air consumption: continuous: approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction connection 3x extraction ports Ø 80 mm Extraction speed 30 m/sec - measured at extraction port Extraction requirement min. approx. 2500 m³/h Machine weight approx. 1650 kg (with options!) Machine installation location: The ProTec can generally be anchored to the floor. A concrete floor (or foundation) is required (at least at the four corners/feet of the machine). Equipment: Protec 571 Profit HSK63F with 3-position magazine Folding roller table 765 mm (Y-axis), for machine front, width 500 mm Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm Auxiliary stop 600 mm with integrated rollers for roller tables Additional safety equipment via slat curtain Precondition for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill bit set for Protec, shank Ø 10 mm with clamping surface (JSO) 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L 3 HW dowel drill 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW dowel drill 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW dowel drill 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW dowel drill 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW dowel drill 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R HW grooving cutter Ø 125/30 mm Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and by arrangement Tool holder HSK63 F 3.00 pcs For 462E/OZ25 collet Collet 462E/OZ25 for shank 25 mm, 3.00 pcs. Indexable insert end mill Z1+1 1.00 pc HW with indexable insert spiral drill Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert spiral drill, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (the adapter 0571WAB10 must be ordered separately). Decorative grooving cutter HW indexable inserts Z1 1.00 pc D Ø 17 mm, d Ø 10 mm, L1 Iedpfx Aow Tfzfea Dsid

Kondisi: bekas, Tahun pembuatan: 2019, Machine construction type: Throughfeed/return feed Working dimensions in X direction: 1,300 mm Working dimensions in Y direction: 5,600 mm Working thickness (Z dimension): 60 mm Number of main spindles: 1 unit Main spindle power: 5.5 kW Main spindle speed: 1,000-20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool storage positions: 3 units Back wall groove unit: fixed in Y direction Vertical drilling spindles – in X direction: 3 units Vertical drilling spindles – in Y direction: 10 units Horizontal drilling spindle in X direction: 2 units Horizontal drilling spindle in Y direction: 6 units Iodpoymp N Tsfx Aa Doid Control type: PC control Operating system: Windows QWERTY keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Online connectivity available: Yes Table design: fixed, smooth table Central lubrication: automatic Tools: Various tools Operating hours: 920 h Weight approx.: 1,800 kg Extraction diameter: 3 x 80 mm Machine has been modernized at the factory, pressure beam and control technology from model 0572! Storage location: Customer

Kondisi: sangat baik (bekas), Gannomat Mesin Bor Lubang Panjang / Mesin Bor Dübel dengan Motor Leroy-Somer - Tipe motor: LS80L2 - Daya: 1,1 kW - Kecepatan putar: 2810 rpm - Tegangan: 220/380 V - Frekuensi: 50 Hz - Kelas perlindungan: IP54 3-fase penggerak - Meja kerja yang kokoh - Rel pemandu presisi - Pembatas yang dapat diatur - Konstruksi logam yang kuat - Ideal untuk pekerjaan seri dan sambungan kayu presisi – lengkap dengan mata bor dan mata bor cangkir Iisdpfx Aaey Saw He Ded - Tekanan udara harus ditutup secara manual

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), From insolvency: Model RRI 8460 Iedpfxsk T Av Rs Aa Dsid Serial no. 18/70139708 with Spitznas tensioning device with automatic feed, model 512089940 in original case

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, nomor mesin/kendaraan: L705226, Fungsionalitas: berfungsi sepenuhnya, DATOS TÉCNICOS Fabricante: Baron Max Modelo: KL-2680 Año: 2007 Número de serie: L705226 Unidad de control: Fagor 8055TC CAPACIDAD DE TRABAJO Diámetro de giro sobre bancada: 670 mm Altura de centro sobre bancada: 335 mm Altura de centro sobre carro transversal: 205 mm Diámetro de giro sobre carro transversal: 400 mm Distancia entre puntos: 2100 mm Ancho de bancada: 450 mm CABEZAL PRINCIPAL Morse del husillo: A1-11 Diámetro interior del husillo: 305 mm Capacidad de barra: Ø105 mm Rango de velocidades del husillo: 3 rangos, cambio automático de engranajes Rangos de velocidades: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Conicidad en el husillo: MT#6 Iodpfx Asvai Swea Djid CARRO Recorrido longitudinal (eje Z): 2000 mm Recorrido del carro transversal: 450 mm Dimensiones de portaherramientas: Herramienta de mandrinado Ø40 mm / Herramienta exterior y de refrentado 25 mm Husillo de bolas (Ø x paso): Eje X: Ø25 mm x paso 5 mm / Eje Z: Ø50 mm x paso 10 mm CONTRAPUNTO Diámetro de caña: Ø105 mm Recorrido de caña: 220 mm Conicidad de caña: MT#5 MOTORES Motor de husillo: 20 HP Motor de avance eje Z: 12 Nm (FKM 44.3) Motor de avance eje X: 6,3 Nm (FKM 42.3) Motor de bomba de refrigeración: 1/4 HP AVANCES EJE X, Z Avance rápido eje X: 6 m/min Avance rápido eje Z: 8 m/min DATOS GENERALES Potencia requerida: 20 KVA Dimensiones (L x A x H): 4090 x 1950 x 1820 mm Peso aproximado de la máquina: 4700 kg EQUIPAMIENTO Sistema de refrigeración Portaherramientas manual de 4 posiciones Plato autocentrante de 4 garras Ø12'' Luneta fija

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Gannomat Concept 70 Eco Carcase Press Year of Manufacture: 2025 including the following options: - Rapid traverse speed, adjustable movement speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections during carcase pressing, as well as for drawer manufacturing. Brief Overview: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for stepless adjustment of pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and movement speeds: 5 / 10 / 25 mm/sec (with fine positioning / crawl mode) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: extremely simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: extremely simple operation via LCD display Universal Application Range: • Carcases e.g. for furniture and cabinets • Mitre carcases • Carcases with overhanging top panels • Drawers • Pressing of multiple carcases/drawers simultaneously Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical carcase press with frequency-controlled geared motors • Independent vertical and horizontal pressure beams • Long service life due to tried-and-tested, high-quality components • Solid and robust construction • Space-saving design • Carcase pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Very simple operation thanks to a practical operating panel • Fast thanks to pressure beam positioning speeds of up to 50 mm/sec (option) • Efficient due to precise pressing of various carcase sizes • Flexible thanks to adjustable parameters such as pressing force, pressing time, and movement speeds • Precise thanks to angle-accurate pressing of furniture carcases and drawers • Professional production of carcases and drawers with a state-of-the-art carcase press Iedpfxevxgrro Aa Deid