Membosankan dan penyisipan mesin

Gannomat Red Baron & Basica Variabel

Kondisi: sangat baik (bekas), Calibrating and Fine Grinding Machine with 1 Grinding Unit, 1 Motor, Processing from Above Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed speeds: 5.5 & 11 m/min Nkjdpfxjudxchs Aglet 1st Unit: Combination unit, grinding roller, rubber-coated, 90 Shore / pneumatically operated sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Approximate dimensions L x W x H: 1385 x 1980 x 1900 mm Weight: approx. 1800 kg Automatic workpiece thickness adjustment with digital display Abrasive belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 exit rollers Emergency stop button Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago MORE THAN 30 PCS WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical specifications subject to error and prior sale. • Prices quoted are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Nsdpfxolht Hzo Aglskt

Kondisi: baru, Tahun pembuatan: 2024, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Jointing unit Whispercut Corner rounding unit radius: R = 2 mm Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Njdpfx Agsg Tu Rkelskt Multi-radius scraper (R1/R2) Chassis Release agent spray unit Cleaning agent spray unit Edge protection spray Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: baru, Technical data: Nkodpfx Asgtm U Ajgljt Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: baru, Tahun pembuatan: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle shaft (milling spindle) Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Color: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed, one-sided tilting spindle for tilt range from -5° to +45.5° Positioning control for height and tilt adjustment with height zeroing and offset travel Electronic position and speed indicators 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Nedpfx Agjfpb Nmslskt Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick-clamping system for cutter arbor Finely planed cast iron table with rigid frame support Control panel mounted below on rigid frame support Cutter fence 216 with total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum chip deflector lips Machine socket outlet Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle shaft 30 mm, non-interchangeable CE compliant GS tested

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, nomor mesin/kendaraan: 248, (Fast and efficient drilling of series of holes thanks to the interchangeable 32 mm drilling gear system with continuous extension units) (5-spindle horizontal drilling head allows simultaneous drilling for fittings and wooden dowels) Year of manufacture: 2009 Machine number: 248 Maximum working pressure: 6 bar Depth adjustment up to 550 mm Vertical drilling head motor power: 1.6 kW Horizontal drilling head motor power: 0.75 kW Voltage: 380 V, 3-phase Feed pressure at 6 bar: 296 kg Weight without horizontal drilling device: 95 kg Weight with horizontal drilling device: 118 kg Chip extraction connection diameter: 100 mm Airflow rate: 141 m³/h Nkodpfet Ebibsx Agljt Air consumption: 1.2 liters per stroke Worktable: 800 x 970 mm Recommended base cabinet height: 950 mm Additional equipment: Extension rulers

Tahun pembuatan: 2021, Kondisi: siap digunakan (bekas), Panel saw Felder FORMAT 4 KAPPA 550 ini diproduksi pada tahun 2021. Fitur utama meliputi meja geser dengan diameter mata gergaji 250-550 mm, tinggi potong 202 mm pada 90° dan 140 mm pada 45°. Mendukung tiga kecepatan: 3000, 4000, dan 5000 rpm, serta lebar potong 1250 mm dan panjang 2800 mm. Mesin ini juga dilengkapi kontrol e-motion dan stop teleskopik untuk pemotongan melintang hingga 3200 mm. Silakan hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Pemotongan (Kayu) Nodpfx Ajx D Exqsglskt

Kondisi: baru, Tahun pembuatan: 2023, Veneer Press OMC PL 105 LC 30/13 Water-Based Working area: 3000x1300 mm Opening width: 400 mm 6 cylinders, diameter 85 mm Total pressure: 105T Maximum heating temperature: 85°C Logic control system Machine operation via touch panel Readouts: temperature, pressing force, shelf opening time, loading area calculator, adhesive process programming Power: 21 kW CE certificate Njdpfx Aoiypzleglokt Year of manufacture: 2023 Machine available on order Brand new machine

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Nksdpjg A D Anofx Aglot Width: 1656 mm Height: 2025 mm

Kondisi: baru, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table size: 1100 x 735 mm Sliding table: 3200 x 400 mm Ripping length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Main blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port Ø: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor intake power S6 40%: 7.5 kW (10.0 HP) Scoring unit motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Scope of delivery • Electrically adjustable saw blade height • Digital cutting height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence Nkodpfx Ajd N S T Dsglot • Longitudinal stop flaps • Support table with roller • Push stick • Independent scoring unit with dedicated motor • Operating tools Features • Powerful main drive motor (5.5 kW) with high torque, optimized for top cutting performance • Easy-running double roller carriage with central and end-position locking for precise cuts • Max. saw blade diameter 400 mm for cutting heights up to 125 mm • Support table with roller for easier handling of large workpieces • Fold-down rip fence with micrometric fine adjustment (advantage for large panels) • Standard independently driven scoring unit (motor power 0.75 kW) • Rigid saw assembly with double-sided guided tilt elements in cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously tiltable from 90° to 45°