Beli Gergaji Bundar Alu Manual bekas (20.768)

Kondisi: baru, Tahun pembuatan: 2026, Aluminum circular saw UK 350 M, manual The UK 350 M is a manual table circular saw with simple and safe operation! This machine allows for double miter cuts to the right and left up to 45°. The miter adjustment is achieved by rotating the fence jaw. The UK 350 M features a compact design with clear, user-friendly controls. The saw cut is performed manually from below into the workpiece. The material is clamped manually. A fixed guard protects the cutting area. Equipment Iodpjidqk Ssfx Afiear - Compact closed design with clear, straightforward controls - Manual clamping device - Fixed guard in front of the cutting area - Saw blade diameter: 350 mm Work sequence 1) Set the cutting angle 2) Insert material 3) Manually clamp the material 4) Press the start button to run the saw blade 5) Perform the saw cut manually using the hand lever 6) After completing the cut, switch off the machine! Supplied without stand (optionally available)! You are welcome to inspect the desired unit at any time in our production/demo hall. Please feel free to contact us. Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, Aluminium Circular Saw UK 300 M, manual The UK 300 M is a manual table circular saw featuring simple and safe operation. This machine enables double mitre cuts to the right and left up to 45°. Mitre adjustment is achieved by rotating the fence. The UK 300 M boasts a compact design with user-friendly controls. The cutting action is performed manually, moving the saw blade upward through the workpiece. Material clamping is manual. A fixed guard protects the cutting area. Equipment - Compact, fully enclosed design with intuitive operation Iedpfx Afsidqahsijar - Manual clamping device - Fixed guard in the cutting area - Saw blade diameter: 300 mm - Manual feed for cutting - Mitre adjustment: left 45°, 90°, right 45° - Integrated manual length stop - Ideally suited for mobile use - Optimal for profile cutting Working sequence: 1) Set the cutting angle 2) Place the material 3) Manually clamp the material 4) Press the start button to start the saw blade 5) Perform the cut manually using the hand lever 6) After completing the cut, switch off the machine! Supplied without base frame (optional accessory)! You are welcome to inspect the desired machine at any time in our production/demo hall. Please feel free to contact us. Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The UK-350-P is a manual table circular saw featuring straightforward and safe operation! This machine enables double mitre cuts to the right and left up to 45°. Mitre adjustment is made by rotating the stop jaw. The UK-350-P boasts a compact design with clear, user-friendly controls. Sawing is performed manually from below into the workpiece. The material is pneumatically clamped. A fixed guard protects the cutting area. Features • Precision aluminium circular saw • Two-hand safety control system • Mitre adjustment: left 45º / 90º / right 45º • Max. cutting height: 125 mm • Manual saw blade feed, adjustable • Includes 2 vertical pneumatic clamps • Ideal for profile cuts Iajdpogcbuwsfx Afisr • Includes maintenance unit with pressure regulator • Ergonomically positioned control panel • Adjustable stop rail for slotting operations Supplied without base frame (optional)! You are welcome to inspect the desired machine at any time in our production/demo hall. Please feel free to contact us to arrange an appointment. Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, UK 300 P – Manual Table Circular Saw with Pneumatic Clamping The UK 300 P is a compact, manually operated table circular saw equipped with a pneumatic clamping system for simple and safe operation. Thanks to the double mitre cut function, cuts to the right and left up to 45° are possible. Mitre adjustment is conveniently performed by rotating the fence tray. Features: ✔ Enclosed, compact design with user-friendly controls ✔ Two pneumatic clamping cylinders for secure material fixation Iedpfx Asidqbbofijar ✔ Fixed blade guard for the cutting area ✔ 300 mm saw blade for precise cuts ✔ Manual feed for maximum control ✔ Minimal quantity lubrication for clean cutting ✔ Mist spray system for air-oil cooling Work Process: Set the cutting angle Insert and pneumatically clamp the material Activate the saw using the start button Manually perform the cut using the hand lever Switch off the machine after cutting Technical Data: ✔ Motor power: 1.4 kW / 400 V / 50 Hz ✔ Cycle control: manual (pneumatic clamping) ✔ Rated speed: 3,000 rpm ✔ Saw blade dimensions: 300 x 32 mm ✔ Machine dimensions: 700 x 500 x 900 mm ✔ Weight: 80 kg Cutting Capacity: 90° Cut: max. 100 mm / 85 x 85 mm / 120 x 50 mm / 75 mm 45° R/L Cut: max. 80 mm / 60 x 60 mm / 75 x 45 mm / 65 mm Optional Accessories: 🔹 Machine base (Art. No. 30002) 🔹 Material roller conveyor 🔹 Length stop (MD 50 series) 🔹 Material roller stand (Art. No. 10002) 🔹 High-performance lubricant for aluminum (Art. No. 80004) The UK 300 P provides a simple, safe, and flexible solution for precise cuts in various materials. Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, Aluminum Circular Saw UK 352 P, manual The semi-automatic circular saw UK 352 P is an "upcut" machine, primarily used for cutting profile materials made of aluminum cast, copper, and hard plastics (solid materials to a limited extent). The machine is characterized by its user-friendly operation, quick and convenient material changing, and easy miter angle adjustment. The UK 352 P features a continuously adjustable miter range, left up to 45° and right up to 0°. Saw feed is automatic via push button, and material clamping is performed by two pneumatically controlled vertical clamping cylinders. As standard, the machine comes equipped with a minimum quantity lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are provided. Equipment: - Manual saw blade guidance - Dual miter 30° – 90° – 0°, large support plate Iasdpjidunvjfx Afier - Powerful drive motor - Clearly arranged control panel - Two vertical pneumatic clamping cylinders - Fixed material stop, can be moved backwards to increase cutting capacity - Large safety guard covering the entire working area - Minimum quantity lubrication system - Air gun for machine cleaning - Saw blade ø 350 mm Working Process: 1) Adjust the cutting angle 2) Insert the material 3) Move the clamping cylinders to within 20 mm of the material 4) Pneumatically clamp the material 5) Press the start button to start the saw blade 6) The cut must be made manually with the hand lever 7) After cutting, switch off the machine You are welcome to inspect the desired machine at any time in our production/demonstration hall. Please feel free to contact us for an appointment. We look forward to hearing from you! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, Aluminum Circular Saw UK 352 M, manual The manual circular saw UK 352 M is an “upcut” machine, primarily used for single cuts on aluminum, copper profiles, and hard plastics (limited suitability for solid material). The machine stands out for its straightforward operation, rapid and convenient material change, and easy mitre angle adjustment. The UK 352 M features a steplessly adjustable mitre range: up to 45° to the left and up to 0° to the right. Saw feed is performed manually via a hand lever; the material is clamped manually. Equipment • Double mitre 45° – 90° – 0° • Large support table • Powerful drive motor • Clearly arranged control panel • One manual clamping cylinder • Fixed material back jaw can be moved to the rear to increase cutting capacity • Large protective hood covering the entire work area • Saw blade diameter 350 mm Work Process 1) Set the cutting angle 2) Insert the material Iaodpjidunnefx Afier 3) Manually clamp the material 4) Start the saw blade by pressing the start button 5) The cut is made manually via the hand lever 6) After cutting, switch the machine off! You are welcome to inspect the desired machine at any time in our production/demonstration hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Kondisi: bekas, NC twin-blade multi-blade saw for light metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre circular saw For cutting to length and slotting aluminium profiles Saw blade stroke: 500 mm Maximum cutting height: 100 mm Saw blade speed: approx. 5,000 rpm Installed saw blade diameter: 300 mm Maximum saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table cut-out: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Multiple saw blades can be mounted on a single working shaft supported on both sides - The working shaft is an extended milling arbor SK40 - Belt drive between the drive motor and saw shaft - Table height adjustable via handwheel (for cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servo motor - Single-axis NC control for the cutting movement LENORD + BAUER Type GEL 7541.0000 - Separate control cabinet Ijdpfx Afedzp Snjiear Required space (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 117004, panjang total: 7.500 mm, lebar total: 1.200 mm, tinggi total: 2.000 mm, berat keseluruhan: 2.500 kg, KALTENBACH SKL 400 H Cold Circular Saw (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontally 45°: 220 x 60 mm - Profiles vertically 45°: 80 x 120 mm - Saw motor: 3.7/4.5 kW - Cutting speed: 1,750/3,500 m/min - Saw blade feed: 0 - 3,700 mm/min - Saw blade rapid return: 4,500 mm/min Additional equipment: - Workpiece clamping with short-stroke vice: stroke 8 mm - with hand crank for pre-setting - Machine overhauled and newly painted - Front horizontal clamping cylinder per piece - Minimal lubrication in place of coolant mist spraying system - Infeed roller conveyor T3 with rollers 60 x 289 mm - one lead-in section: 2,000 mm, with 5 rollers, one stand, one mounting bracket - one extension section: 2,000 mm, with 4 rollers, one stand, one stop roller, adjustable as a guide for material bars - Length measuring device including outfeed roller conveyor T3 Iajdey Dcu Espfx Afier Note: The item must be collected on an agreed date between 07 and 09 July 2026, binding collection required. FCA D-71263 Weil der Stadt – loaded onto truck

Kondisi: baru, Tahun pembuatan: 2026, jam operasional: 818 h, nomor mesin/kendaraan: S-MD 315, diameter mata gergaji: 315 mm, panjang pemakanan sumbu X: 100 mm, panjang umpan sumbu Y: 100 mm, panjang umpan sumbu Z: 80 mm, tebal plat aluminium (maks.): 100 mm, tinggi total: 100 mm, Rentang pemotongan baja bulat pada 45°: 80 mm, ketinggian potong (maks.): 315 mm, berat keseluruhan: 350 kg, tegangan masuk: 380 V, tahun perombakan terakhir: 2026, Rentang pemotongan baja persegi pada 45°: 80 mm, Kisaran pemotongan baja persegi pada 90°: 100 mm, diameter pemotongan: 315 mm, lubang pisau gergaji: 32 mm, daya: 380 kW (516,66 hp), Perlengkapan: Penandaan CE, Mesin Pemotong Profil dan Logam dengan Ragum Ganda Pneumatik Iaedpey Aw Spofx Afijr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1587 / 1588, diameter mata gergaji: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw Unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching Unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. Punching is performed vertically from above, with punch tool cassettes accommodating up to 8 profiles simultaneously. Material Feed: The material is fed via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per stroke. Ijdpfxoyyz Txs Afijar Control System: Modern versions are often equipped with a Siemens S7 control unit featuring a touch display for intuitive operation and precise programming. The machine is built for continuous industrial use and offers the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on equipment). Dimensions (Saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also customized financing options tailored to your needs. Whether down payment, installment plan, or individual financing models – together we will find the right solution. Upon request, we will also handle the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and on-schedule process so you don’t have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding offer. We will advise you personally and professionally. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1589 / 1590, diameter mata gergaji: 500 mm, Fully automated sawing and punching machine for aluminum and plastic profiles The Profilma 502 ST-V combines precision sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex operations, and processing bundled materials. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Up-cut saw motion, motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round shaft guidance - Minimum offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punching unit (discharge side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2–3 seconds - Punch scrap ejection into frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2 × 3-liter tanks and fill level indicator - Soundproofing package: hood and saw blade guard insulated inside - Roller conveyor (740 mm) with reach-in guard on feed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety cover - Saw blade housing below tabletop Max. cutting capacity: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: Ijdpfx Afjyyz Eboioar - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailored financing options designed to suit your needs. Whether down payment, installments, or individual financing models—we will find the right solution together. On request, we also handle complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process, so you do not need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1591 / 1592, diameter mata gergaji: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic pass-through process. Based on the Profilma 502 model, it is specially optimized for high-volume applications and combined operations—including the processing of entire profile bundles. Control is via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnostics. An IXON router allows secure remote access via VPN. Up to 10 punching positions can be programmed per job. The horizontal punching unit can be deactivated as required. Saw range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Continuously variable speed adjustment - Saw cut from below, motorized feed - Material feed: 3–800 mm, reversing up to 4,000 mm - Ball screw with servo drive and round shaft guide - Offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical and horizontal hydraulic punching unit (output side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke continuously adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punching scrap is discharged laterally from the machine frame - Conveyor belt 250 × 800 mm for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free connection for extraction control - Minimum quantity lubrication system with two 3-liter tanks and fill-level display - Noise protection package: hood and internal blade guard sound-insulated - Roller conveyor (740 mm) with reach-in protection on feed side - Robust stationary frame, working height: 960 mm - Manually opening protective hood - Saw blade housing under the table Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available. ---- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailored financing solutions to suit your needs. Whether it's a down payment, installment plan, or custom financing models—together we'll find the right solution. On request, we can also take care of the entire transport organization. From planning to reliable delivery, we ensure smooth and timely handling so you don’t need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We will be happy to provide you with personal and competent advice. Subject to prior sale, changes, and errors! Isdpfxsyyzxhj Afijar

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 500 mm, Gergaji aluminium circular sudut ganda dalam versi semi-otomatis. Rentang sudut potong: 90° hingga -45° kanan/kiri, -60° kiri. Daya penggerak: 4,0 kW, 400 V, 50 Hz. Kecepatan mata gergaji: 50 m/detik. Ukuran mata gergaji: Ø 500 x 30 x 4,0 mm. Dimensi: 1488x960x1540 mm. Tinggi meja: 1067 mm. Berat: 500 kg. Aksesoris: Iaodpfx Afjy Av T Eeisr - Roller conveyor masukan 5 m lebar 230 mm - Roller conveyor keluaran 3 m lebar 230 mm dengan penghenti ukur digital

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 520 mm, CNC-controlled double-head mitre circular saw machine with electronic saw unit swivelling A high-performance circular sawing machine for the precise and efficient cutting of profiles made from aluminium, non-ferrous metals, and various plastics. The machine can be used for single cuts—using both saw heads simultaneously to cut the profile—or in automatic mode, where the double-head saw operates as a single-head saw automaton. Electronic mitre adjustment of the saw heads. Mitre angles are infinitely programmable between 20° and 135° Saw blade drive power: 2 x 2.2 kW Iajdpfx Afoy Afvieier Saw blade diameter: Ø 520 mm Maximum cutting length with both saw heads simultaneously: 4,000 mm or 5,000 mm Maximum / minimum cutting length in automatic mode: unlimited (the profile is pushed and pulled) Length of the accompanying roller conveyor: 2,300 mm Maximum space required: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with touchscreen and colour graphics on a movable control panel - Import and export of CSV / LTE files (for loading cutting lists from external CAD software) - Graphical profile display Optionally equipped with a label printer.

Kondisi: baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 600 mm, Rentang pemotongan baja bulat pada 90°: 220 mm, For sale: Iedpsuyyhasfx Afiear 1 used CNC aluminium circular saw automatic including extraction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC Year of manufacture: 2015 TECHNICAL DATA • Cutting range round: 220 mm, box: 300 x 90 mm, square: 175 mm • Drive power: 4.1 kW / 400 V / 50 Hz • Speed: 3,000 rpm • Cutting speed: 55 m/sec • Blade dimensions: 600 x 50 mm • Max. cutting height: 220 mm • Dimensions: 2020 x 1510 x 975 mm • Weight: 650 kg The machine comes complete with a 6 m infeed roller conveyor and matching extraction unit. The saw can be viewed at our warehouse in 09599 Freiberg.

Kondisi: baik (bekas), diameter mata gergaji: 400 mm, – Double mitre Isdpfsim Ezgjx Afisar – Minimum quantity lubrication system (MQL) – Protective cap – 400V

Kondisi: baru, Tahun pembuatan: 2026, 1686017643489 Ijdpofv T Anofx Afioar

Kondisi: baru, Tahun pembuatan: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is distinguished by its user-friendly operation and quick, convenient material changeovers. This model is designed exclusively for 90° cuts. The saw feed is actuated automatically at the push of a button, while material clamping is performed by two pneumatically operated vertical and horizontal clamping cylinders each. As standard, the machine comes equipped with a minimal lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are provided. Optionally, this saw can be fitted with a digital miter angle display, a marking laser, and a pneumatic guard lifting mechanism. Features - Large support table, powerful drive motor - Two-button control for initiating the sawing cycle (optionally available with single-button operation) - User-friendly control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be moved rearwards to increase cutting capacity - Large protection hood covering the entire working area - Minimal lubrication system with 2-liter reservoir - Adjustable saw blade and feed rate - Air pistol for cleaning the machine - Saw blade diameter: 600 mm Isdepa Nxdjpfx Afioar Work Sequence 1. Set the cutting angle 2. Insert the material 3. Adjust the feed speed 4. Position the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button to ready the machine 7. Press and hold both SAW buttons to start cutting 8. After the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material For technical data such as cutting range and performance, please refer to the data sheet attached to the email. We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, Aluminium Circular Saw UK 650 HA, Semi-Automatic The semi-automatic circular saw UK 650 HA is an upcut machine, primarily used for cutting profile materials made from cast aluminum, copper, and hard plastics (solid materials possible to a limited extent). This machine is characterized by its user-friendly operation, quick and convenient material changeover, as well as easy miter angle adjustment. The UK 650 HA offers stepless miter adjustment to both the left and right up to 20° (swivel range: two times 70°). Saw feed is triggered automatically at the push of a button, while material clamping is performed by two pneumatically controlled vertical and two horizontal clamping cylinders. As standard, the machine comes equipped with a minimal lubrication system and an air blow gun for cleaning. Connections for chip extraction systems are also provided. In addition, this machine can optionally be fitted with a digital miter angle display, a marking laser, and pneumatic lifting for the safety guard. Features - Double miter 20° – 90° – 20°, large support table - Powerful drive motor - Two-button control for initiating the saw cut (optional single-button control available) - Clearly arranged control panel - Adjustable blade and feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic blade lifting with oil level indicator - Fixed material stop can be moved backward to increase cutting capacity - Large safety guard covering the entire working area - Minimal lubrication system with a 2-litre reservoir - Air blow gun for machine cleaning - Saw blade Ø 650 mm Operating Procedure 1. Set the cutting angle 2. Insert the material Iodpoidun Defx Afijar 3. Adjust the stroke speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. Press the Start button to make the machine ready for operation 7. Press and hold both SAW buttons; material will be cut 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material You are welcome to view the desired equipment anytime in our production/demo hall. Please feel free to contact us to arrange a visit. We look forward to hearing from you! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The semi-automatic circular saw UK 352 HA is an 'upcut' machine, primarily used for cutting profile materials made of die-cast aluminum, copper, and hard plastics (also suitable for solid materials to a limited extent). The machine is distinguished by its ease of operation, quick and convenient material change, and simple mitre angle adjustment. The UK 352 HA features a continuously adjustable mitre range—up to 45° to the left and 0° to the right. Saw feed is automatic and activated by push button; material clamping is achieved via two pneumatically operated vertical clamping cylinders. A minimal lubrication system and an air spray gun for cleaning the machine are included as standard! Connections for a chip extraction system are provided on this machine. Equipment • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right 45° • Incl. 2 pneumatic (vertical) clamps • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop • Connection for chip extraction system Iaodpfx Afogwt Rrsisr • Mist spray device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically positioned control panel • Max. cutting height 125 mm • Saw blade 350 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at our production/showroom at any time. Please feel free to contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine primarily used for cutting profile materials made from cast aluminum, copper, and hard plastics (solid materials only to a limited extent). The machine is notable for its user-friendly operation, quick and convenient material change, and simple mitre angle adjustment. The UK-400 A offers a continuously adjustable mitre range to the left and right up to 20° (swivel range of twice 70°). Saw blade feed is automatic via push button, and the material is clamped by two pneumatically controlled vertical and horizontal clamping cylinders each. Standard equipment for this machine includes a minimum quantity lubrication system and an air blow gun for cleaning. Connections for a chip extraction system are provided. Optionally, this machine can be fitted with a digital mitre angle display, a marking laser, and pneumatic lifting for the safety hood. Equipment • Precision under-table circular saw • Stepless mitre adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Stepless adjustable saw blade feed Iaedpfsgwt Rnsx Afier • Two-hand safety control system • Adjustable rear material stop • Extraction device - chip extraction system • Mist spraying unit for air-oil cooling • Air blow gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically arranged control panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included! You are welcome to view the desired unit at any time in our production/demo hall. Please feel free to contact us to arrange a visit. We look forward to hearing from you! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material only conditionally). This machine is characterized by its ease of operation, quick and convenient material changes, and simple adjustment of the mitre angle. The UK 352 HA offers stepless mitre adjustment from 45° to the left and 0° to the right. The saw feed operates automatically at the push of a button, and the material is clamped by two pneumatically controlled vertical clamping cylinders. The standard configuration includes a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction system are also available on this machine. Iodpfsgwt Ryjx Afisar Features: • Precision under-table circular saw • Mitre adjustment: 45º left / 90º center / 45º right • Includes 2 pneumatic clamps (vertical) • Stepless adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device port • Mist lubrication device for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically positioned control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the delivery! We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, tekanan: 6 batang, The semi-automatic circular saw UK-600-A is an upcut machine, primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials possible within limits). The machine stands out for its user-friendly operation, quick and convenient material changeover, and easy mitre angle adjustment. The UK-600 A offers stepless adjustment of the mitre angle to the left and right up to 20° (total swivel range 2 x 70°). Saw feed is automatically initiated at the push of a button, while material clamping is provided by two pneumatically operated vertical and two horizontal clamping cylinders. Standard features of this machine include a minimum-quantity lubrication system and an air blow gun for cleaning. Connections for a chip extraction system are available. Optionally, the machine can be equipped with a digital mitre angle display, a layout laser, and pneumatic lifting for the safety guard. Equipment: • Precision under-table circular saw • Infinitely adjustable mitre setting 0º / 45º / 90º / -45º / -60º • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed Iaodsgcbwgspfx Afijr • Two-hand safety control • Adjustable rear material stop • Chip extraction facility • Minimum-quantity air-oil spray cooling system • Air blow gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically positioned control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our production/demo hall. Please feel free to contact us regarding this. We look forward to your enquiry! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The semi-automatic circular saw UK 500 HA is an "upcut" machine, predominantly used for cutting profile materials made of cast aluminium, copper, and hard plastics (solid materials to a limited extent). The machine stands out due to its ease of operation, quick and convenient material changeover, as well as straightforward mitre angle adjustment. The UK 500 HA features a continuously adjustable mitre range of up to 30° to the left and 0° to the right. Saw feed is automatic via push-button control, and material clamping is achieved through two pneumatically operated vertical and two horizontal clamping cylinders. As standard, the machine is equipped with a minimum-quantity lubrication system and an air blow gun for cleaning. Provisions for the connection of a chip extraction system are available on this machine. Equipment: • Precision under-table circular saw • Mitre adjustment 0º/ 45º/ 90º/ -45º / -60º, stepless • Incl. 2 pneumatic clamps (vertical) • Continuously adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction unit – chip extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 180 mm • Saw blade 500 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our production/showroom hall. Feel free to contact us to arrange this. We look forward to your inquiry! Plantec Maschinen GmbH Isdpegwt R Dofx Afioar

Kondisi: baik (bekas), Tahun pembuatan: 2012, diameter mata gergaji: 250 mm, panjang pemakanan sumbu X: 250 mm, panjang total: 1.400 mm, lebar total: 1.200 mm, tinggi total: 2.400 mm, kecepatan rotasi (min.): 1.400 rpm, kecepatan rotasi (maks.): 5.360 rpm, berat keseluruhan: 450 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, g_alusaegeprz2012 Ijdeyyl Hpjpfx Afijar