Beli Gildemeister 9.635.839 High Board 25-355 bekas (34.944)

Kondisi: siap digunakan (bekas), Gildemeister 9.635.839 high board 25-355, serial number as per photo, used, normal signs of wear, 100% functional. Dcsdpfx Aisi D U Tgoueh

Kondisi: bekas, Hydraulic power unit, hydraulic pump - Hydraulic power unit from a Gildemeister lathe - Drive power: 1.1 kW - Speed: 1410 rpm - Max. pressure: 25 bar - Flow rate: l/min - Filter - Hydraulic tank - Dimensions: 500/680/H660 mm Dodpfx Aisb Uht Eouoch - Weight: 98 kg

Kondisi: baru, The AE-400 SERVO edger is designed for longitudinal edging and cutting of side boards supplied to the machine at high speeds (100-400 m/minute). The machine interfaces directly with feeding and receiving conveyors for boards, operating in fully automatic mode. The machine is equipped with a board scanner from above and below. The maximum temporary output of the edger, up to 50 boards/min, can be achieved when cutting 2.5m boards to the same width without altering the saw blade spacing. Any adjustment of the edger’s components to the board’s width changes the throughput. Depending on the operational configuration, the average machine output ranges from 35-48 boards/min. Technical data: No. | Parameter | Value --- | ----- | ----- 1. Main saw spindle drive motor power: 55 kW 2. Saw spindle rotation speed: 3550 rpm 3. Saw blade diameter: 400 mm 4. Maximum cutting height: 50 mm 5. Number of saw blades: 2 to 3 pcs (2 floating saws) 6. Minimum board length: 2000 mm 7. Maximum raw material length: 6200 mm 8. Maximum number of boards after cutting 1 board: 2 pcs 9. Feed rate: 100-400 m/min Cutting into 1 board – with two saw blades (2 floating blades): - Minimum saw blade spacing (board width after cutting): 75 mm - Maximum outer blade spacing (board width after cutting): 300 mm Cutting into 2 boards – with three saw blades (2 floating blades): - Spacing of blades on fixed coupling (board width after cutting): 50-100 mm - Spacing between floating blades (board width after cutting): 50-100 mm - Minimum width for cutting into 2 boards: 2 x 50 mm Djdsnygvrjpfx Aiuoch - Maximum width for cutting into 2 boards: 2 x 100 mm Other machine configurations are available upon request. Machines are custom-built. We also manufacture other sawmill lines: log sorting lines, board sorting lines, board stackers, conveyors.

Kondisi: bekas, High-Speed-Zähler 25/500 kHz, PLC-Steuerung, Zählermodul, Zählerbaugruppe - Hersteller: Siemens, Simatic S5 High-Speed Counter 25/500 kHz Dcodpjh Db H Dsfx Aiuoh - Typ: 6ES5 385-8MB11 - Stückzahl: 2 Module verfügbar - Preis: pro Stück - Abmessungen: 100 x 45 x H135 mm - Gewicht: 0,2 kg pro Modul

Kondisi: sangat baik (bekas), High Speed Counter 25/500 kHz, PLC control, counter module, counter assembly Dcjdpfx Aisb Nkuhoujh -Manufacturer: Siemens, Simatic S5 High Speed Counter 25/500 kHz, original packaging -Type: 6ES5 385-8MB11 -Quantity: 3x High Speed Counters available -Price: per package -Box dimensions: 140/110/H60 mm -Weight: 0.3 kg/unit.

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 300 h, Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.160 mm, panjang total: 1.350 mm, tinggi total: 1.700 mm, tekanan: 2.500 batang, tekanan kerja: 2.500 batang, bahan bakar: diesel, berat keseluruhan: 1.850 kg, kecepatan rotasi (maks.): 1.800 rpm, panjang selang tekanan tinggi: 20.000 mm, berat kosong: 1.850 kg, kapasitas tangki bahan bakar: 140 l, jenis pendinginan: air, daya: 120 kW (163,15 hp), tekanan air: 2.500 batang, kapasitas pompa: 25 l/menit, Perlengkapan: Pelat tipe tersedia, derek, cd160-2500-pump-technical-translation Djdpsxufbtsfx Aiuech

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, 25m_stow_pal_rack Dsdpfx Ajya D Aheiuoch

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, 25m-stow-pal-rack Dedpfxsya Dt Hs Aiuech

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 14.901 h, Fungsionalitas: berfungsi sepenuhnya, DMG MORI / GILDEMEISTER CTX beta 1250 TC 4A CNC Turning/Milling Center DMG CTX beta 1250 TC 4A, year of manufacture 2012. The machine is equipped with Siemens 840D / ShopTurn 3G and features main and counter spindle, B-axis, Y-axis, upper milling spindle as well as a lower star turret. Current operating hours approx. 14,901 h, current spindle hours approx. 5,000. The machine is still connected to power and utilities and can be inspected by appointment. Dcsdpfx Aijzbg Txsush Condition: Exceptional / Immaculately Maintained Technical Data Process: Turning / Milling / Complete Machining Machine type: CTX beta 1250 TC 4A Year of manufacture: 2012 Weight: approx. 16,000 kg Power rating: 85 kVA Control: Siemens 840D / ShopTurn 3G Main spindle / Counter spindle: each 1 x FNC 250, up to 5,000 rpm Main spindle: Hainbuch Spanntop nova Modular 80 Main spindle through-bore: 77 mm diameter Counter spindle partial through-bore: 67 mm diameter x 700 mm Coolant supply: 8 / 20 / 40 / 80 bar Short bar loader: IRCO ILS-RBK 100/16 Upper milling spindle: HSK-63A, 24-position disc-type tool magazine Upper unit travels: B-axis +/-110 degrees, Y-axis +/-100 mm, X-axis 450 mm, Z-axis 1,200 mm Lower star turret: VDI 40, 12 tool stations, X-axis 195 mm, Z-axis 1,200 mm Options: Turret-mounted steady rest SMW SLU-X-2-ZS 8-101 mm Installation footprint: approx. 9,200 x 2,600 mm including exhaust filter system, chip conveyor, and bar loader Video recordings and extensive photo collection available on request via WhatsApp.

Kondisi: bekas, Tahun pembuatan: 2010, 20240613-1 Dcodpfx Aoy T R Rmjiujh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 51.226 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan rotasi (maks.): 5.000 rpm, Kontrol: HEIDENHAIN Plus iT dengan Turn Plus Panjang pembubutan: 1175 mm (mesin dengan tailstock 1100 mm) Dcjdpfoy Niziox Aiujh Penjepit alat: HSK 63A (DIN 69893) Magasin alat: 1 x magasin cakram 36 posisi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 75.078 h, Fungsionalitas: berfungsi sepenuhnya, CNC Turning and Milling Center Gildemeister CTX gamma 1250 CT – Technically Excellent Condition (Year: 2016) Operating hours: 75,078 Spindle hours: 48,772 Available from: Week 47 / 2026 (Inspection under power during ongoing production possible) Basic Equipment Dodpfx Ajy A Hngsiujch Turning length: 1,250 mm Main spindle as integrated spindle motor (ISM102) Drive power: 35/45 kW (100/40 % duty cycle) Speed: up to 4,000 rpm Partial hollow clamping device (hydraulic) Draw tube internal diameter: 104 mm, 848 mm deep C-axis with hydraulic spindle brake Upper cross slide with turning/milling spindle as motor spindle Mounting: HSK-63A DIN 69893 Hydraulic clamping during turning Y-axis: ±200 mm B-axis: ±120° (torque motor) Disc-type tool magazine: 36 stations NC tailstock with mounted, hydraulically movable quill and fixed center point Absolute, direct path measuring systems in X, Y, and Z1 axes Coolant pump: 6 bar, 20 l/min, filter fineness 10 µm Cooling system for spindle motors, motor console, turning/milling spindle, and B-axis USB and Ethernet interfaces Control CNC control: Siemens Sinumerik 840D solutionline Operation: ERGOline Control Software: SINUMERIK Operate, ShopTurn 3G Operating system: Linux Extended Equipment Tool chain magazine: 120 stations (instead of 36 stations) Mechanical oil mist separator, filter class H13 Chuck flushing device at the main spindle Coolant supply through the spindle Tropical package (up to 40 °C ambient temperature) Workpiece probe BLUM TC60 incl. cycles package 3D data model of the workspace (STEP / IGES) Profibus interface Handheld control device with jog mode and emergency stop function Tailstock force increased to 20 kN Special tailstock design for twist-proof contact device Coolant & Chip System Coolant cleaning system: Filter unit FK 20 (20 l/min) Coolant tank 950 l Magnetic drum MW180 Process pumps: 5 bar / 20 bar Chip conveyor type 300 S-2 (wear-resistant design, XAR) Return pump: 1.2 bar Condition The machine has been regularly serviced by Gildemeister Service and is in technically flawless condition. Dimensions & Weight Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg Total weight incl. accessories: approx. 22,605 kg Number of packages: 11 Loading meters: approx. 21 Dismantling, loading, transport, and recommissioning can be organized Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Kondisi: sangat baik (bekas), CNC turning/milling center Gildemeister CTX gamma 1250 CT Year: 2016 Photos to follow… Available from March 2027 Basic machine CTX gamma 1250 CT with turning length of 1250 mm - Main spindle as integrated spindle motor, ISM102, drive power 35/45KW (100/40% duty cycle), 4000 rpm - Partial hollow clamping device (hydraulic), draw tube inner diameter 104 mm x 848 mm deep - C-axis and spindle brake (hydraulic) - Upper cross slide with turning/milling spindle as motor spindle with hydraulic clamping during turning, HSK-63A DNI 69893 interface - Y-axis ±200 mm - B-axis ±120°, torque motor - Disc-type tool magazine, 1x36 positions - NC tailstock with supported, hydraulically adjustable quill, fixed center - Absolute, direct position measuring systems in X-, Y-, and Z1-axes - Coolant pump 6bar; 20 l/min, plug-in sieve, filter fineness 10 microns - Cooling system for spindle motors, motor console, turning/milling spindle, B-axis torque motor - CNC control with ERGOline operating panel (make and type as per control description) - USB interface, Ethernet interface CNC control: SIEMENS Sinumerik 840D solutionline with ERGOline Control, SINUMERIK Operate and ShopTurn 3G, Linux operating system with no extra charge Tool chain magazine, 120 positions, replacing 36-position disc magazine, tool holder HSK-A 63 DNI 69893, -only with Siemens control- Mechanical oil mist separator, 100 m³/h, filter class H13 Chuck flushing device at the main spindle, external, Coolant supply through the turning spindle Tropical package for machine environment temperatures up to max. 40°C, consisting of control cabinet cooling unit (up to 40°) B-H7080 Workpiece measuring probe, BLUM, with Quickstart cycles package consisting of probe TC60 incl. transmitter and receiver unit, tool holder HSK 63A, 1 probe tip, measuring cycles B-Z0908 3D data model of the working area of the specified machine, data format Step and IGES. The 3D data model is supplied on CD. B-L7000 Electrical interface, standard Profibus Handheld control device The axes X1, Y, 1, Z1, C1, B1, X2, Z2, Z3, C3, C4 can be moved via the hand terminal in jog mode, slow mode, or incrementally via the handwheel. Emergency stop function and feed override are available on the hand terminal. The tailstock feed force is increased to 20 kN. SK-2014-3518 The tailstock is supplied without quill support, to allow the installation of a torque-resistant push device. If used as a tailstock, a revolving center must be used. Coolant cleaning unit: - Filter unit type: FK 20 * Filter capacity: 20 l/min * Filter medium: filter fleece PN100/100 - Coolant tank 950 l type: FKA/950 - Magnetic roller type: MW180 - Process pump 5 bar (50 l/min) - Process pump 20 bar (40 l/min) with DBV 20/40 - Control cabinet Chip conveyor type: 300 S-2: - Design wear-resistant (guides and base plates made from XAR) - Return pump 1.2 bar (100 l/min) etc. The complete equipment and further technical data can be found in the documentation, which we are happy to provide upon request. The machine has always been maintained by Gildemeister customer service and is in perfect technical condition. It can be inspected under power and during ongoing production. Dimensions & weight: (LxWxH) Machine CTX Gamma DL 125 - 580x280x285 cm, 20,000 kg Chip conveyor 670x125x160 cm, 1,000 kg Total weight including accessories 22,605 kg Number of packages 11 Loading meters: 21 Dismantling, removal, shipping, and re-installation can be organized. Djdpfx Aioy Axuxouoch

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 61.440 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 06800003891, kecepatan rotasi (maks.): 5.000 rpm, model controller: Siemens 840D powerline, Perlengkapan: dokumentasi / manual, konveyor serpihan, DETAIL TEKNIS Kecepatan putar maks.: 5.000 rpm DETAIL MESIN Kontrol: Siemens 840D powerline Data Listrik Daya tampak: 50 kVA Arus nominal: maks. 72 A Arus: 80 A Tegangan jaringan: 400 V Frekuensi: 50 Hz Tegangan kontrol: 230 V Dcsdpfxeyzqtko Aiush Tegangan: 24 V Jam operasi menyala: sekitar 76.300 jam Jam spindle: sekitar 61.440 jam PERALATAN Sistem rotasi palet Sabuk material untuk komponen yang telah diproses Konveyor serbuk sisa Dokumentasi/manual Catatan: Mesin dijual tanpa chuck, alat potong, dan dudukan benda kerja mentah. Penjual juga dapat menawarkan aksesori berikut secara tambahan: Chuck KNCS225 dari SMW seharga €1.500 Palet Ewab (palet dasar) 10 unit seharga €500 Perpanjangan sabuk konveyor untuk produk jadi €2.000 Set dudukan dasar VDI 40 sesuai mesin 10 unit €1.000

Kondisi: bekas, Tahun pembuatan: 2005, Technische Details: Umlaufdurchmesser: 320 mm Steuerung: 840 D SIEMENS Drehzahl: 5000 1/min Spindelmotor: 20 / 27 kW Dcedemcibwopfx Aiujh Futterdurchmesser: 250 mm Verfahrweg - x: 650 mm Verfahrweg - z: 300 mm Revolverkopf: 12 Pos. Werkzeughalter: VDI 40 Werkzeugdrehzahlen: 4000 1/min Werkzeugantriebsleistung: max. 11,7 kW Maschinengewicht ca.: 8 t CNC Vertikaldrehmaschine rechte Ausführung, Angetriebene Werkzeuge, C-Achse, Hochdruckpumpe 20 bar, 500l, Filter Spritzpistole, 3-Backenfutter, EWAB Beladestation rechts, Späneförderer Zählerstände: ca. 23.500 Einschaltstunden, ca. 8.000 Spindelstunden (gesamt) MASCHINE WIRD MIT ÜBERHOLTER SPINDEL GELIEFERT (0 STunden) *

Kondisi: baik (bekas), Tahun pembuatan: 2003, jam operasional: 41.852 h, spezifikationen-des-werkstücks:maximaler-schwingdurchmesser:ca.- 2.500-mm-maximale-drehhöhe:ca.-2.000-mm-maximales-werkstückgewich t:ca.-10.000-kg-(abhängig-von-der-konfiguration)spindelspezifikat ionen:spindelantriebsleistung:ca.-50-kw-(abhängig-vom-modell),spi ndeldrehzahlbereich:ca.-10-500-min⁻¹-(modellabhängig-variabel),sp indelaufnahme:große-spindelaufnahme-für-schwere-drehbearbeitungti schspezifikationen:tischaus-durchmesser:ca.-2.500-mm,tragfähigkei t-des-tisches:ca.-10.000-kgachsenverfahrwege:x-achse:ca.-2.000-mm ,z-achse:ca.-2.000-mmwerkzeugsystem:werkzeugaufnahme:typischerwei se-vdi-oder-ähnliche-schwere-werkzeughalter,anzahl-werkzeuge:je-n ach-revolverkopf-üblicherweise-12-oder-mehr-genauigkeit:positioni ergenauigkeit:ca.-0,01-mm,wiederholgenauigkeit:ca.-0,005-mmmaschi nenabmessungen-und-gewicht:maschinengewicht:ca.-30.000-kg,maschin enabmessungen:ca.-5.000-x-4.000-x-4.000-mmzusätzliche-ausstattung :hochdruckkühlsystem-für-effiziente-späneabfuhr-und-kühlung,optio nale-automatisierungssysteme-zum-be-und-entladen-der-werkstücke,f ortschrittliche-cnc-steuerung-für-komplexe-bearbeitungsaufgaben. Djdpjvy Ti Hjfx Aiuech

Kondisi: bekas, Tahun pembuatan: 2004, en-GB_001 Dcjdjtzyx Topfx Aiueh

Kondisi: sangat baik (bekas), CNC vertical turning lathe Gildemeister CTV 250 Working area: Chuck diameter: 250 mm X-axis travel: 800 mm Z-axis travel: 300 mm Spindle head: 170 h5 Dsdpovuqm Ssfx Aiuoch Spindle diameter at front bearing: 120 mm Spindle bore: 79 mm C-axis Number of tool stations: 12 Videos available!!

Kondisi: bekas, Tahun pembuatan: 2011, Turning machines Travel X: 270 mm Travel Y: 120 mm Travel Z: 1200 mm Turning length: 1135 mm Max. swing diameter: 700 mm Max. turning diameter: 340 mm Max. torque: 680 Nm Speed range up to: 4000 rpm Control: DMG Driven spindles Driven tools: 50 Chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal unit Conveyor belt for removal of workpieces from the machine Dcedpfxewwv Ifo Aiujh Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extractor Control cabinet cooling unit (up to 40°) 4-color signal tower, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, spindle speed: 5000rpm, spindle power: 22kW, tool stations: 12, tool holder: VDI 40, main spindle bore: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection possible. Dcedpeubyy Nofx Aiujh

Kondisi: bekas, Tahun pembuatan: 2005, Swing diameter: 640 mm Turning length: 1,185 mm Control: SINUMERIK 840D Max. workpiece diameter: 640 mm Distance between spindle heads: 1,500 mm Slide I: X1 / Y1 / Z1 / B Travel X-axis: 550 mm Travel Y-axis: 180 mm Travel Z-axis: 1,185 mm B-axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00/11.00/7.50 kN Tool holder: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Number of tools in magazine: 46 Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free slots: 120 mm Max. tool weight: 6 / 10 kg Slide II: X2 / Z2 Travel X-axis: 180 mm Travel Z-axis: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (multi-station): 12 positions Tool holder DIN 69880 Ø40 Driven tool stations: 12 Driven tool speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm Slide III Z3 mm Travel Z-axis: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36.00 m/min Feed force Z-axis S6: 13.00 Nm Main spindle ISM90 Main spindle speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm Counter spindle speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm Total power requirement: 70.00 kW Machine weight approx.: 20.00 t Space requirements approx.: 8.50 x 4.50 x H3.10 m Machine features: SIEMENS SINUMERIK 840D control, main and counter spindle, chip conveyor, oil mist separator, DMG Automation WH10top. Main spindle ISM90: Hollow clamping device, C axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow clamping device, C axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Workpiece transfer device with integrated conveyor belt, automatic safety cover, differential pressure clamping. With pump skid for coolant: - Pump 1: 17 l/min at 80 bar - Pump 2: 20 l/min at 8 bar - Pump 3: 40 l/min at 20 bar Without coolant system, previously connected to central system. Accessories: Dsdpfxoydflls Aiujch Hainbuch collet chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece workpiece gripper for turret

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.185 mm, diameter pembubutan: 640 mm, kecepatan spindel (maks.): 4.000 rpm, diameter pembubutan di atas alas geser: 640 mm, torsi spindle sekunder (maks.): 5.000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between spindle noses: 1,500 mm SLIDE I X-axis travel: 550 mm Y-axis travel: 180 mm Z-axis travel: 1,185 mm B-axis: 240° Feed rate X-axis: 0 - 40,000 mm/min Feed rate Y-axis: 1 - 24,000 mm/min Feed rate Z-axis: 1 - 70,000 mm/min Feed rate B-axis: 1 - 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 - 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free spaces: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-axis travel: 180 mm Z-axis travel: 1,050 mm Feed rate X-axis: 1 - 24,000 mm/min Feed rate Z-axis: 1 - 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool interface: DIN 69880 Ø40 Driven tools - quantity: 12 Speed: 1 - 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-axis travel: 1,150 mm Feed rate Z-axis: 1 - 36,000 mm/min Rapid traverse Z-axis: 36 m/min Dcedpfx Aiewyvc Uouoh Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Space requirement: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: through-hole clamping system, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial through-hole clamping system, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pickup system with integrated conveyor belt Automatic safety hood Differential pressure clamping With pump station for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece gripper for turret

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5601-0106, panjang pembubutan: 320 mm, kecepatan spindel (maks.): 10.000 rpm, berat keseluruhan: 2.800 kg, saluran batang: 33 mm, dilengkapi dengan Iemca Boss 542 baru tahun 2000 – peralatan lengkap – Kontrol Ge Fanuc 18i-T Djdpsxn R N Asfx Aiujch

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Lathe Model: CTV 250 - R Manufacturer: DMG Gildemeister Dcedei Ewq Sjpfx Aiuoh Serial Number: 6860000451 Power-on hours: 46,491 Spindle hours: 30,748 Footprint: 4m x 3m Optional: Cooling unit available for connection to two CTV 250 machines

Kondisi: siap digunakan (bekas), lubang spindel: 36 mm, diameter putar di atas sled silang: 33 mm, panjang pembubutan: 320 mm, en-001 Dcsdpfx Asw Rcd Eeiujh