Beli Hydrauliköltank 420 Liter bekas (7.815)

Kondisi: baik (bekas), hydrauliktank-specs Kjdpfx Apshuk N Eo Eelt

Kondisi: baik (bekas), hydraulikoeltank_de_01 Kedpei Eg I Hsfx Ap Eelt

Kondisi: baik (bekas), Mesin Banding NM-420 W30 Mesin baru ini didasarkan pada desain Barat yang telah terbukti. Tahun pembuatan: 2025. Perangkat dapat beroperasi dalam mode manual atau otomatis. Setelah material dimasukkan, mesin akan membungkusnya dengan pita, memampatkan, dan menutupnya sehingga menghasilkan paket yang elegan. Ksdpoy Tu Rdofx Ap Eelt Ideal untuk membungkus kartu nama, selebaran, dan material lainnya. Spesifikasi teknis: Lebar pita: 30 mm Siklus per menit: 26 siklus/menit Dimensi produk terikat: 400 x 200 mm Paket sudah termasuk pita dan buku petunjuk.

Tahun pembuatan: 2025, Kondisi: baru, Multiple saw sumbu ganda tipe SQUALO 420 adalah mesin modern yang mudah dioperasikan, presisi, dan sangat andal. Motor utama 2x45kW, dijual karena proyek dibatalkan! Jangan ragu untuk menghubungi jika ada pertanyaan! Kjdpfx Asy Sw Euep Eolt

Kondisi: baru, 🧰 Fitur Produk • Kondisi: baru • Warna: abu-abu • Volume: 650 l • Kapasitas beban: 4000 kg (pada suhu ruangan 5°) • Berat sendiri: 43 kg • Panjang: 120 cm • Lebar: 100 cm • Tinggi: 78 cm • Dapat ditumpuk: Ya • Bentuk stabil: Ya • Keunggulan: cocok untuk penyimpanan rak, tahan cairan, katup pembuangan opsional 💰 Harga € 155,- netto belum termasuk PPN • Diskon jumlah: berdasarkan permintaan • Biaya pengiriman: seluruh Eropa atas permintaan • Waktu pengiriman: siap dikirim segera • Peninjauan dan pengambilan: dapat dilakukan kapan saja sesuai perjanjian Selalu tersedia lebih dari 5000 meter lari rak palet dari berbagai produsen di stok (Perubahan dan kesalahan pada data teknis, informasi, dan harga serta penjualan sementara dapat terjadi! Lihat S&K kami, semua harga belum termasuk PPN ex gudang.) Ksdpfx Apehvrk To Ejlt

Kondisi: baik (bekas), de-001 Kedpfx Apeyligvs Eslt

Kondisi: sangat baik (bekas), Microbox Simatic PC 420 Klsdpjim H Shjfx Ap Est 6AG4040-0AE10-0AB0 S VPTN 00 1726

Tahun pembuatan: 2002, Kondisi: bekas, EN-001 Kledjc Nkx Uopfx Ap Eet

Kondisi: sangat baik (bekas), Heraeus Vötsch Model: VCS 7018-5 Climatic Test Chamber with Humidity, Water-Cooled Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1775 mm Technical Data for Temperature Testing: Temperature Range: -70°C to +180°C Temporal tolerance: ± 0.1 to ± 0.5 K Spatial tolerance: ± 0.5 to ± 2.0 K Temperature gradient: 1 to 4 K Temperature change rate according to IEC 60068-3-5 Heating: 7.5 K/min Cooling: 7.5 K/min Technical Data for Climatic Testing: Temperature Range: +10 to +95°C Humidity range: 10 to 98% r.h. Temperature deviation (temporal): ± 0.1 to ± 0.3 K Kledpfx Asv N Hc Eep Eot Temperature deviation (spatial): ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Humidity fluctuation (temporal): ± 1 to ± 3% r.h. Dew point range: -3 to +94°C Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 10 kW Rated current: 21 A Fuse: 32 A slow-blow, on site Refrigerant: R-404A / R-23 Test chamber volume: approx. 190 liters Weight: approx. 460 kg For your peace of mind as a buyer, please note the following: The following procedures are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to changes and errors!) If you have any further questions, we are happy to answer them by phone.

Kondisi: bekas, Tangki baja tahan karat 145.000 liter Diameter: 4,95 m Tinggi tangki: 7,60 m Tinggi struktur baja di bawah tangki: 80 cm Kljdpfx Asxrtcmjp Eot Total tinggi: 8,40 m Tangki memiliki dasar datar dan dipasang pada struktur baja setinggi 80 cm.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat kosong: 8.220 kg, berat muatan maksimum: 24.780 kg, berat keseluruhan: 33.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 10/1986, Tahun pembuatan: 1986,

Kondisi: baru, Tahun pembuatan: 2025, Our SAPI pressure blasting unit, type "Mammut," with a 100-liter vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit is also equipped with a water separator, which removes moisture from the compressed air and prevents the blasting media from clumping due to excess moisture. For safe operation, our safety shut-off is included. This starts and stops the blasting process when the hand lever mounted on the blasting hose is engaged. The pressure blasting unit is delivered fully operational, space-savingly mounted in a mesh box. Only the compressed air supply must be connected and filled with blasting media. Transport can be carried out conveniently by forklift or pallet truck. A lockable aluminum box is provided for storing protective clothing, spare parts, etc. Scope of delivery: - SAPI pressure blasting unit "Mammut 100 L" - 1" pressure regulator, permanently mounted - 1" water separator, permanently mounted - SAPI safety shut-off - Blasting media sieve - Cover - 10 m blasting hose, ø 25x7 mm, completely assembled - Silicon carbide venturi long nozzle, diameter 6 mm, 8 mm, or 10 mm (selectable) - RED 2 sandblasting helmet - Sandblasting overall, nylon/cotton - 1 pair of leather blasting gloves - 10 m breathing air hose, fully assembled Klodpjwc Ri Iofx Ap Ejt - Breathing air filter/activated carbon filter SAF - Wear part set consisting of: * 100 tear-off foils for RED 2 * 10 inner lenses for RED 2 * 1 blasting hose coupling 25x7 mm nylon * 2 rubber seals for hose coupling * 1 nozzle holder 25x7 mm - Mesh box with hose holder - Lockable aluminum box Technical Data for Pressure Blasting Unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Permanent 1" pipework (internal & external) - Rubber-coated metal cone with gasket - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common media) - Capacity: 100 liters - Total height: 1,130 mm - Vessel diameter: 490 mm - Overall diameter: 900 mm - Weight: approx. 75 kg Mesh Box Dimensions: - Length: 1,460 mm - Width: 840 mm - Height: 1,400 mm - Total weight including all accessories: 260 kg

Kondisi: baru, Tahun pembuatan: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter pressure vessel is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar using the integrated pressure regulator. The unit is also equipped with a built-in water separator, which removes moisture from the compressed air to prevent the blasting media from clumping due to excess humidity. For safe operation, our safety shut-off system is included. This starts and stops the blasting process with the actuation of the hand lever, which is mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 200 L" - Pressure regulator 1 1/4", permanently installed - Water separator 1 1/4", permanently installed - SAPI safety shut-off system Technical data - Pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-tested with certificate - Fixed piping 1 1/4" internal and external - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosage valve (suitable for all common media) - Capacity: 200 liters - Total height: 1,420 mm - Vessel diameter: 600 mm - Total diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off: Klodpswc Rk Eefx Ap Ejt - Fastest shut-on and shut-off times in compliance with trade association regulations (VBG 48) - Pressure can be precisely set before blasting – continuously adjustable from 0.1 to 12.0 bar - Lower media consumption, as the pressure vessel remains constantly pressurized and no unnecessary run-on is required - Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up required → less consumption & less hose wear - No condensate formation in the vessel, as it remains constantly pressurized → no venting or aeration required at each start/stop - Optimum blasting media dosing through hardened fine dosing valve - Reduced compressed air requirement → noticeably lower diesel consumption - One-man operation, as the pressure can be displayed and adjusted directly at the manometer – also possible without starting the machine - No sensitive components such as control valves, membranes, or seals → low-maintenance and reliable - Only the blasting hose at the safety shut-off requires regular inspection and replacement if necessary

Kondisi: baru, Our SAPI pressure blasting unit, type "Mammut," with a 60-liter tank capacity, is suitable for all standard blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the built-in pressure regulator. A water separator is also permanently installed on the blasting unit, which removes moisture from the compressed air and prevents clumping of the blasting media due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off is included. This starts and stops the blasting process by actuating the hand lever mounted on the blasting hose. Scope of delivery: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off Technical data of pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV-certified with certificate - Fixed pipework 1" internal and external - Metal cone covered with rubber and rubber gasket - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 litres - Total height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off - Fastest switching times on and off, while complying with trade association regulations (VBG 48) - The pressure can be precisely set before the actual blasting process, infinitely adjustable from 0.1 to 12.0 bar - Reduced media consumption, as the pressure vessel remains permanently pressurized, preventing unnecessary media run-on - Upon restarting, full blasting pressure is immediately available at the nozzle without needing to build up slowly. This ensures significantly lower media consumption and considerably less wear on the blasting hose - No condensation forms in the vessel, as the tank remains continuously pressurised and is not repeatedly vented for each start and stop. This method also offers other advantages as follows: - Optimal blasting media dosing with hardened fine dosing valve - Reduced compressed air requirement, resulting in significantly lower fuel (diesel) consumption - One-man operation, as blasting pressure is constantly displayed by the vessel pressure and can easily be adjusted via the manometer without starting beforehand - No failure-prone components such as control valves, membranes or seals, making it low-maintenance and reliable. Only the blasting hose in the safety shut-off needs to be checked and replaced if necessary. Ksdpfowc Afhsx Ap Eslt

Kondisi: bekas, Tahun pembuatan: 1977, Roller diameter 420 mm Throat depth 410 mm Workpiece height 265 mm Saw blade width 3 - 25 mm Cutting speed 12 - 375 m/min Table surface 600 x 600 mm Klodpfx Apjy T Sdbj Eet Total power requirement 1.7 kW Machine weight approx. 0.6 t Space requirement approx. 1.0 x 0.9 x 1.9 m

Kondisi: sangat baik (bekas), memmert-forced-air-drying-oven-heating-cabinet-manufacturer-memm ert-gmbh-co-kg-type-ufp-800-for-sale-is-a-used-memmert-ufp-800-fr om-commercial-use-technical-data-type-ufp-800-protection-class-ip 20-standard-din-12880-ki-3-1-temperature-range-up-to-approx-250-c -connection-3n-400-v-50-60-hz-power-consumption-approx-4800-w-cur rent-consumption-approx-7-a-external-dimensions-approx-1190-x-750 -x-1620-mm-internal-dimensions-approx-1040-x-600-x-1200-mm-volume -approx-749-liters-weight-approx-170-kg-features-stainless-steel- interior-forced-air-circulation-digital-control-programmable-oper ation-possible-glass-viewing-doors-multiple-shelf-levels-mobile-o n-casters-condition-used-unit-from-commercial-use-cosmetic-condit ion-see-pictures-normal-signs-of-use-and-storage-present-scope-of -delivery-memmert-ufp-800-heating-cabinet-inserts-accessories-as- per-pictures-scope-of-delivery-exclusively-as-illustrated-notes-s ale-exclusively-to-business-customers-used-equipment-sold-without -warranty-or-guarantee-subject-to-change-errors-and-prior-sale-if -you-have-any-further-questions-we-will-be-happy-to-answer-them-b y-phone-or-message. Kodsy T Idwspfx Ap Eelt

Kondisi: bekas, Tahun pembuatan: 1979, Roller diameter 420 mm Throat depth 410 mm Bandsaw blade length 3150 - 3260 mm Bandsaw blade width 3–16 mm Weight approx. 600 kg with IDEAL butt welding machine Kjdpfxevg R U Hs Ap Eelt without table! Only a small, self-made table (hardwood) included Operating manual available

Kondisi: baik (bekas), L1000-1460-1460-620 Ksdpfx Aey Ty Arop Eolt

Kondisi: bekas, Tahun pembuatan: 2015, lathe-specs-de-hu Klodpfxeyvkr Ao Ap Eet

Kondisi: bekas, Tahun pembuatan: 2004, Maximum turning diameter: 560 mm Turning length: 600 mm Control: Siemens 840D powerline Swing diameter over bed: 680 mm Swing diameter over cross slide: 565 mm Centre distance: 620 mm Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 25 / 37 kW Max. torque: 390 Nm Spindle nose: 170H5 Spindle bearing diameter: 120 mm Bar capacity diameter: 65 mm Max. chuck diameter: 250 mm C-axis: 0.025° / 360° Speed range - sub spindle: 20 - 7,000 rpm Drive power - sub spindle: 25 / 33 kW Max. torque: 213 Nm Spindle bearing diameter: 90 mm Spindle bore: 57 mm Spindle nose: 140H5 C-axis: 0.025° / 360° Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range - driven tools: max. 4,500 rpm Drive power - driven tools: 12.2 kW Tool holder VDI 40 DIN 69880 Kodswmf Tpopfx Ap Ejlt Tool shank: 40 mm X-axis: 185 mm Y-axis: 80 mm Z-axis: 620 mm Rapid traverse X: 60 m/min Rapid traverse Y: 15 m/min Rapid traverse Z: 45 m/min Total power requirement: 50 kVA Machine weight approx. 7 t Space requirement approx. 6.0 x 3.0 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX 420 linear V6 - Main and sub spindle - Tool drive - C-axis / Y-axis - Partial hollow clamping device - ShopTurn user interface - incl. 2x driven tools - incl. 4x double tool holders - incl. 4x tool holders - incl. 83x tools

Kondisi: bekas, Tahun pembuatan: 1988, bandsaw-mossner-rekord-sm420-2024 Ksdpfsxgu Iyox Ap Eelt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection Unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2020 bar Dosage volume: 231 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Klsdoy Smkmjpfx Ap Est Hot runner control Injection unit hardened - bimetallic Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are checked by our service technicians before sale. It is possible to receive a video showing the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection Unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosing volume: 168 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen dimensions: 600x600 mm Ejector: hydraulic Clamping system: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Klodpfx Aey Slzwjp Eet Injection unit hardened - Bimetal Main motor of the machine - Servo motor driven with inverter - Energy saving Built-in printer Machine has been regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servo motors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, protective enclosure Purchase of the robot at extra cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 44.858 h, gaya penjepit: 4.200 kN, diameter sekrup: 90 mm, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, Mesin cetak injeksi hidrolik dari tahun 2011. Krauss Maffei 420-4300 CX ini memiliki gaya penutup 420 t dan diameter screw Ø 90 mm. Mesin ini menawarkan bukaan maksimum cetakan sebesar 1400 mm dan jarak antara batang 800 × 800 mm. Jika Anda mencari mesin cetak injeksi berkualitas tinggi, Krauss Maffei 420-4300 CX yang kami tawarkan ini patut dipertimbangkan. Hubungi kami untuk detail lebih lanjut mengenai mesin ini. Kledpfoy S Tw Hsx Ap Est • Kapasitas injeksi (PP): 1,2 kg • Ukuran minimum cetakan: 380 mm • Jarak antar batang: 800 x 800 mm • Bukaan maksimum cetakan: 1400 mm • Jam operasi: 44.858 jam

Kondisi: bekas, 2-axis linear guide with linear motors – Slide Arm Pick and Place with linear guides for automation Loading unit similar to SCARA robots, manipulators, handling devices, handling systems, pick & place grippers, loading grippers for automation Manufacturer: SCHUNK – GEMOTEC – AFAG – LINMOT Type: PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of manufacture: approx. 2005 Horizontal axis with Gemotec linear motor, type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal travel: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeatability: +/- 0.05 mm Horizontal load capacity: max. 7000 g Guide column horizontal: Ø 20 mm Vertical axis with LinMot linear motor, type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical travel: 160 mm Nominal vertical force: 44 N Max. vertical force: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeatability: +/- 0.05 mm Guide column vertical: Ø 20 mm Power supply: LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame support columns: 4 pcs Ø 55 mm Support columns height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Travel possible in two axes - Mounting plate for tool holder: 66 x 56 mm - Integrated position measuring system - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Kledpfx Apou H R Iws Ejt Required space L x W x H: 1120 x 720 x 740 mm Net weight: approx. 65 kg Very good condition.