Beli Hylatechnik Kolom Ganda Presse bekas (14.210)

Tahun pembuatan: 1978, Kondisi: bekas, Press force 2000 / 1000* t Column distance 2650 mm Stroke 500 mm Side opening between columns 500 x 1000 mm Plunger diameter 710 mm Number of pressure cylinders 2 Distance table / ram 1000 mm Operating pressure 130 / 230 bar Overall height 800 mm Table length 2500 mm Table width 1600 mm Table height 250 mm Return force 500 kN Number of T-slots 8 Spindle speed 1500 rpm Rapid traverse speed 120 - 140 mm/min Closing speed max. 120 - 140 mm/sec Ram return via small separate cylinder 100 - 110 mm/sec Hydraulic ram locking Noise suppressor 300 t Cushion force 200 t Cushion stroke 250 mm Cushion speed 100 mm/sec Frequency 50 Hz Voltage 380 V Oil volume 2000 l Total power requirement 93 kW Machine weight approx. 100 t Ledod Ih Ncopfx Afieaa Space requirement approx. 5000 x 2500 x 7200 mm Transport dimensions approx. 6500 x 3750 x 2190 mm *Conversion: 1991 installation of a drawing cushion, new nameplate due to pressure reduction – PO 1000: Machine is currently limited to 1000 tonnes (Reason: tools were only rated for 1000 tonnes) The press ran flawlessly until it was dismantled and replaced by a press line. Important for accident prevention regulations (UVV): The press is equipped with a hydraulic ram locking system!

Kondisi: bekas, Pressing force 200 t Distance between uprights 1600 mm Maximum ram stroke 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm Ram surface area 1600 x 1300 mm T-slots DIN 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Lasdjg S R Twjpfx Afija Pressing speed 42 mm/s at 40% Pressing speed 20 mm/s at 100% Drawing cushion force 800 kN Drawing cushion stroke 150 mm Drawing cushion speed up 68 / down 225 mm/s Retrofit year 2001

Tahun pembuatan: 1984, Kondisi: bekas, Pressure: 100 t Upright gap: 1000 mm Stroke: 150 mm Table area: 1000 x 700 mm Lodsfn Apzepfx Afijaa Distance table/ram: 500 mm Drawing cushion stroke: 180 mm Ram area: 1000 x 700 mm Ram boreholes x depth: 50 mm Strokes per minute: 85 spm Pin hole (depth x diameter): 85 x 50 mm T-slot: 22 DIN 650 Shape: diagonal Number of T-slots: 2 Sheet width: 400 mm Sheet length: 1000 mm Space requirement (approx.): 3.0 x 3.0 x 3.0 m Machine weight (approx.): 8 t Total power requirement: 30.2 kW - Fine stroke adjustment - Stroke shock absorption - Oil extraction - 2 cylinders - Roller feed by Dreher, type WAV, control PMS3000 by Dreher - Soundproof cabin - Machine was overhauled in 2001 and equipped with new control SIEMENS SIMATIC OP17

Tahun pembuatan: 1981, Kondisi: bekas, Translation: Lodjb U Hw Topfx Afioaa Pressing force: 40 t Upright spacing: 600 mm Stroke: 160 mm Table size: 560 x 400 mm Installation height: 360 mm Ram bore: 40 H 7 DIN 810 mm Oil capacity: 500 l Return speed: 200 mm/sec Hydraulic cushion pressure/stroke: 60 Ejector force: 25 t Total power requirement: 15 kW Space requirement approx.: 1.44 x 0.95 x 2.54 m Pressing speed: 27 mm/sec Return speed: 200 mm/min With hydraulic draw cushion, speeds: Rapid advance speed: 240 mm/s, steplessly adjustable

Tahun pembuatan: 1980, Kondisi: bekas, Press capacity 100 t Frame gap - mm Stroke 350 mm Table dimensions 1150 x 700 mm Total power requirement 11 kW Machine weight approx. t Lasdodlxctspfx Afisa Space requirements approx. m with ram shock absorber and drawing cushion Machine without control cabinet

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.500 mm, jarak lintasan sumbu Y: 1.750 mm, jarak gerak sumbu Z: 1.000 mm, model controller: Siemens NCU 840 W Serie 2, jumlah sumbu: 5, TECHNICAL DETAILS Travel X-axis: 2,500 mm Travel Y-axis: 1,750 mm Travel Z-axis: 1,000 mm Lajdpfx Asyz Abtefija A-axis: 20 arcseconds C-axis: 30 arcseconds Rapid traverse X-axis: 17 m/min Rapid traverse Y-axis: 17 m/min Rapid traverse Z-axis: 10 m/min Rapid traverse A-axis: 9 rpm Rapid traverse C-axis: 80 rpm Stepless feed X and Y-axis: up to 15,000 mm/min Feed Z-axis: up to 4,000 mm/min Table plate: St 52-3 Table dimensions (L x W): 3,631 x 1,200 mm Milling head: FK 115 - SK40 Spindle speed: 14–1,000 rpm Bearing: A9 LC8 CNC A-axis: Tilting spindle axis A-Axis Swivel angle: ±120 degrees Torque: 450 Nm Speed: 8 rpm Resolution: 20 arcseconds Clamping: Hydraulic C-Axis Rotation angle: 365 degrees Torque: 580 Nm Speed: max. 8 rpm Resolution: 30 arcseconds Clamping: Hydraulic MACHINE DETAILS Control: Siemens NCU 840 W Series 2 CNC controlled axes: 5 Voltage: 400 V 50 Hz Power: approx. 35 kW Weight: 18,500 kg EQUIPMENT Swarf conveyor Sliding door Side window Stationary tool changer in the centre of the machine/rear cross traverse Disc magazine with 16 stations SK40 Heidenhain length measuring system Note: The seller can arrange for an external service provider for the removal of the machine.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Produsen: Line Tipe: Seramill 240 Kontrol: NUM 750 Perjalanan sumbu X: 6000 mm Perjalanan sumbu Y: 2500 mm Perjalanan sumbu Z: 950 mm Lasdpfx Ajyf A H Njfiea Jarak kolom: 2400 mm Meja: 6000 x 2100 mm Kepala frais otomatis: 2,5° Kecepatan spindle: 3200 rpm Kecepatan pengumpanan: 10 m/menit Berat mesin: sekitar 35 ton

Kondisi: bekas, Tahun pembuatan: 1979, Press force: 60 t Column gap: 650 mm Stroke: 220 mm Distance between table and ram, large stroke at top, adjustment at top: 410 mm Table surface: 600 x 525 mm Die cushion force in table: 5 t Die cushion stroke in table: 80 mm Table height above floor: 900 mm Lateral column clearance: 200 mm Ram surface: 560 x 490 mm Space requirement (W x D x H): 1.9 x 1.3 x 2.7 m Approved for manual loading operations according to German accident prevention regulations (UVV) with oil-hydraulic drive, light curtain (Sick FGS 600), hydraulic die cushion in table, two-hand and foot control No foundation pit required Ljdpfevuk Nmjx Afioaa Can be offered as-is, with or without commissioning

Kondisi: bekas, Tahun pembuatan: 1980, Pressing force: 50 t Column spacing: 1,750 mm Stroke: 500 mm Distance table/ram, max. stroke up, adjustment up: 800 mm Table surface: 1,700 x 750 mm Table height above floor: 800 mm Lateral column opening: 650 x 750 mm Ram surface: 1,700 x 750 mm Drive power: 11.0 kW Weight: 11.0 t Space requirements (LxWxH): 2.1 x 1.15 x 3.4 m Approved for manual loading/unloading in accordance with German accident prevention regulations (UVV) With electro-hydraulic drive, pressure/time and position dependent control No foundation pit required Laodpjvuk Ngjfx Afioa Can be offered either as-is (not commissioned) or alternatively with new Siemens S7-1500 F control.

Kondisi: bekas, Tahun pembuatan: 1983, druk160t10 Lajdsvuk E Uepfx Afiea

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, gantry-2010 Lsdpsy Dvwyjfx Afijaa

Kondisi: bekas, Tahun pembuatan: 1979, de-to-hu-it-lt-001 Ljdpfovuk I Asx Afijaa

Kondisi: bekas, Tahun pembuatan: 2007, Table diameter: 2500 mm Max. swing diameter over bed: 2700 mm Turning height: 2500 mm Control: Siemens 840D CNC Max. workpiece weight: 30 t Workpiece diameter: 2500 mm Crossrail travel (increments of 100 mm): 1200 mm Ram stroke: 1500 mm Ram cross-section: 250 x 250 mm Travel speed: 8 m/min Max. vertical feed: 6000 mm/min Max. cross feed: 8000 mm/min Table speed: 180 rpm Tool change time: 1 min Cutting speed: 140 m/min Cutting depth: 14 mm Main drive power: 100 kW Machine weight: approx. 47 t Laodpfoy Dvlwjx Afija Footprint: approx. 12.5 x 8.0 x 6.7 m Equipment/Accessories: - Crossrail adjustable in 100 mm increments incl. locking mechanism - 2 rams with cross-section 250 x 250 mm; stroke 1500 mm - Both rams traversable over center (each 100 mm, i.e. both ballscrews offset from each other with collision protection) - ZF gearbox for main drive AC 100 kW / S1 Siemens, speed range 0–180 rpm - 2 tool changers with 16 stations each - Max. tool weight 50 kg; max. 800 kg in tool changer - 2 Renishaw touch probes with zero-point detection - Renishaw probe for workpiece measurement

Kondisi: bekas, Tahun pembuatan: 1987, b07ccce7cbedcde7 Laodsyz Db Uopfx Afija

Kondisi: baik (bekas), Tahun pembuatan: 1999, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.150 mm, Kontrol: Siemens 840 D Powerline Lasdsy Em Rgjpfx Afisa Pemegang alat: HSK-A63 Kecepatan maksimum: 16.000 rpm Perjalanan X: 3000 mm Perjalanan Y: 2500 mm Perjalanan Z: 1150 mm Sumbu A: +/- 100 mm Sumbu C: +/- 181,5 mm Ukuran meja: 3000 mm x 2500 mm Opsi: Udara tiup luar Kinematika: Kepala garpu

Kondisi: baik (bekas), Tahun pembuatan: 2004, Press KAISER KSTU 1600 - 15 - 3 PSR, gaya tekan 1.600 kN, jumlah stroke 20 - 260 per menit, penyesuaian stroke 20-120 mm, penyesuaian ram 120 mm, tinggi pemasangan 400 mm. Termasuk sistem pengumpan pita. Ledpfx Asy Ev Syofijaa

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Pengoperasian pertama: 2002 Kontrol: Heidenhain iTNC530 Jam mesin: menyusul Sumbu X: sekitar 6.000 mm Sumbu Y: sekitar 3.500 mm Sumbu Z: sekitar 1.100 mm Sumbu A: Sumbu C: Kepala frais 2-sumbu Kecepatan spindle: maks. 14.000 rpm Perlengkapan tambahan Ljdpfxoyzz R Hj Afijaa - Penutup samping ganda Kondisi mesin Berfungsi penuh, kondisi sangat baik. Mesin masih terpasang daya dan siap pakai segera.

Kondisi: baik (bekas), Tahun pembuatan: 1999, KAISER Press KSTU 3150 - 20 - 5 RK Gaya tekan 3.150 kN Lodpfx Afey El S Aeisaa Jumlah stroke 20-150 1/menit Pengaturan stroke 20-180 mm Pengaturan ram 150 mm Luas meja 2.000 x 1.250 mm Luas ram 2.000 x 1.000 mm Tinggi pemasangan 600 mm FECKER Line Pengumpan Strip Lebar strip 30-600 mm Tebal strip 0,3-8,0 mm Berat coil maks. 8.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2000, Kaiser Press KSTU 3500 - 25 - 6 P Tekanan tekan 3.500 kN Jumlah stroke 20-100 1/menit Penyesuaian stroke 40-250 mm Penyesuaian ram 200 mm Ukuran meja 2.500 x 1.250 mm Ukuran ram 2.500 x 1.100 mm Tinggi pemasangan 700 mm Unit jalur pita Dreher Lebar pita 30-600 mm Ketebalan pita 0,3-3,0 mm Berat coil maks. 3.500 kg Lsdpfx Afsy El Iqeijaa

Kondisi: bekas, Tahun pembuatan: 2004, tc_data_machines Ljdpfx Afjyqv Eioisaa

Kondisi: bekas, Tahun pembuatan: 1973, Pressing force 1000 t Lajdpfsyn R Elsx Afisa Column gap 4150 mm Stroke 1200 mm Distance table/blank holder, max. stroke up, adj. up 2100 mm Table area 4000 x 2200 mm Drawing cushion force in table 360 t Drawing cushion stroke in table 300 mm Drawing cushion force in slide 100 t Drawing cushion stroke in slide 150 mm Slide area 4000 x 2200 mm Side column opening 1300 mm Drawing cushion in table hydraulic, controlled Drawing cushion in slide hydraulic, controlled Shock damping hydraulic Machine weight approx. 280 t The machine was overhauled in 1999. Progressive press from a press line

Kondisi: bekas, Tahun pembuatan: 1972, Pressure: 800 t Column clearance: 3160 mm Stroke: 1100 mm Distance table/sheet holder, max. stroke up, upper crossbeam adjustable: 1900 mm Table area: 3100 x 1900 mm Cushion pressure in table: 300 t Cushion stroke in table: 400 mm Cushion pressure in ram: 80 t Cushion stroke in table: 150 mm Ram area: 3100 x 1900 mm Cushion in ram: hydraulic, controlled Lsdpfx Ajyn R Efjfijaa Cushion in table: hydraulic, controlled Follow-on press of a press line

Kondisi: bekas, Tahun pembuatan: 1973, Pressing force 1000 t Column gap 4150 mm Stroke 1200 mm Lsdpfx Afeyn R D Ueioaa Distance table/blank holder, max. stroke up, adj. up 2100 mm Table area 4000 x 2200 mm Drawing cushion force in table 360 t Drawing cushion stroke in table 300 mm Drawing cushion force in slide 100 t Drawing cushion stroke in slide 150 mm Slide area 4000 x 2200 mm Side column opening 1300 mm Drawing cushion in table hydraulic, controlled Drawing cushion in slide hydraulic, controlled Shock damping hydraulic Machine weight approx. 280 t The machine was overhauled in 1999. Progressive press from a press line

Kondisi: bekas, Tahun pembuatan: 1974, Pressing force 600 t Clearance between uprights 2,600 mm Stroke 900 mm Distance table/blank holder, max. stroke up, upper adjustable 1,600 mm Table size 2,500 x 1,730 mm Cushion force in table 250 t Cushion stroke in table 400 mm Cushion force in ram 63 t Cushion stroke in ram 150 mm Ram area 2,500 x 1,730 mm Lateral frame opening 1,100 mm Die cushion in table: hydraulic, controlled Die cushion in ram: hydraulic, controlled Lasdpfjyn R D Isx Afiea The machine was overhauled in 2005 Follow-on press in a press line

Kondisi: bekas, Tahun pembuatan: 1974, Pressing force 600 t Clearance between uprights 2,600 mm Stroke 900 mm Distance table/blank holder, max. stroke up, upper adjustable 1,600 mm Table size 2,500 x 1,730 mm Cushion force in table 250 t Cushion stroke in table 400 mm Cushion force in ram 63 t Cushion stroke in ram 150 mm Ram area 2,500 x 1,730 mm Lateral frame opening 1,100 mm Die cushion in table: hydraulic, controlled Lasdeyn R Dzspfx Afija Die cushion in ram: hydraulic, controlled The machine was overhauled in 2005 Follow-on press in a press line