Beli Ibix Peralatan Bubuk bekas (26.508)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.700 mm, lebar total: 2.490 mm, de Lodpfszarzlsx Aarert

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, panjang total: 44.860 mm, tinggi total: 5.250 mm, lebar total: 17.100 mm, jenis arus masuk: tiga fasa, berat benda kerja (maks.): 80 kg, frekuensi input: 50 Hz, kapasitas pemanasan: 350 kW (475,87 hp), sambungan udara terkompresi: 8 batang, tinggi benda kerja (maks.): 2.000 mm, panjang benda kerja (maks.): 800 mm, jarak antara tiang: 3.000 mm, bahan bakar: gas rumah tangga H, bahan isolasi: PUR, ketebalan isolasi: 80 mm, lebar benda kerja (maks.): 800 mm, Perlengkapan: kabin, pencahayaan, Dijual: bagian aplikasi dari pabrik pengecatan powder tahun 2021. Teknologi aplikasi NORDSON ENCORE HD, kaskade pengisian dengan tegangan hingga 100 kV, sistem kontrol POWDER PILOT, pusat pemberian SPECTRUM HD II, pistol semprot ENCORE HD (16 unit) + 2 unit manual, pompa tipe HDLV (18 unit). Lredowhbnlspfx Aarjt

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Lini Pelapisan Bubuk Industri Lengkap untuk Dijual Kami menawarkan lini pelapisan bubuk industri lengkap dalam kondisi kerja yang baik. Instalasi ini telah dirawat secara profesional dan cocok untuk melapisi berbagai macam produk baja dan logam. Peralatan meliputi: Sistem pra-perlakuan Oven pengering Ruang pelapisan bubuk Peralatan penyemprot bubuk Oven pematangan Sistem konveyor Sistem kontrol elektrik Lredpfx Aaozqur Hjrot Lini lengkap ini tersedia untuk dijual segera dan dapat diperiksa sesuai perjanjian. Kondisi: Dirawat dengan baik Berfungsi penuh sebelum dibongkar Cocok untuk produksi industri Pistol Pelapisan Bubuk GEMA OptiStar CG07

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang total: 24.000 mm, tinggi total: 4.200 mm, jenis arus masuk: AC (pendingin udara), masa garansi: 12 bulan, berat benda kerja (maks.): 9.500 kg, daya: 48 kW (65,26 hp), tegangan masuk: 380 V, suhu: 20 °C, frekuensi input: 50 Hz, kapasitas pemanasan: 6 kW (8,16 hp), panjang dalam: 24.000 mm, lebar dalam: 4.200 mm, tinggi benda kerja (maks.): 1.500 mm, panjang benda kerja (maks.): 3.000 mm, sambungan air limbah: 100 mm, panjang umpan sumbu Y: 16.000 mm, konsumsi energi: 42 kWh, bahan isolasi: Steinwolle, ketebalan isolasi: 50 mm, daya nominal: 48 kW (65,26 hp), tegangan keluaran: 380 V, ketebalan pelat baja (maks.): 3 mm, jenis arus keluaran: AC (pendingin udara), kapasitas tangki: 4.000 l, jumlah pemilik sebelumnya: 1, Jumlah ruang: 4, Perlengkapan: pencahayaan, Ini adalah unit pra-perlakuan di mana bagian logam dibersihkan secara otomatis dengan metode penyemprotan. Ljdozd Sm Iepfx Aarsrt

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Το σύστημα αφορά έναν βιομηχανικό φούρνο με συνολικές διαστάσεις 5000 × 2500 × 3200 mm, σχεδιασμένο για υψηλής απόδοσης θερμική επεξεργασία με μέγιστη αποδοτικότητα και αξιοπιστία. Η μονάδα είναι εξοπλισμένη με σύστημα αερίου λέβητα, ενσωματωμένο με τρεις ηλεκτροκινητήρες υψηλής απόδοσης που διασφαλίζουν ιδανική παροχή ισχύος και σταθερή λειτουργία υπό απαιτητικές συνθήκες. Αυτά συνδυάζονται με τρεις πτερωτές Ø452 mm, οι οποίες έχουν επιλεχθεί προσεκτικά για την επίτευξη άριστης ροής αέρα και τη μέγιστη μηχανική αποδοτικότητα σε όλο τον θάλαμο. Η κατασκευή του φούρνου είναι πλήρως κλειστή, με πάνελ μόνωσης υψηλής αντοχής 180 mm, σχεδιασμένα ειδικά για ελαχιστοποίηση θερμικών απωλειών, εξοικονόμηση ενέργειας και πλήρη στεγανοποίηση του θαλάμου. Αυτή η δομή εξασφαλίζει σταθερές εσωτερικές θερμοκρασιακές συνθήκες και βέλτιστο έλεγχο της διαδικασίας. Επιπλέον, το σύστημα περιλαμβάνει έναν προηγμένο πίνακα ελέγχου, παρέχοντας όλα τα απαραίτητα δεδομένα λειτουργίας και δυνατότητες ρύθμισης. Η διεπαφή έχει σχεδιαστεί με έμφαση στη φιλικότητα προς τον χειριστή και την ευκολία στη χρήση, επιτρέποντας αποδοτικό χειρισμό από το τυπικό προσωπικό χωρίς συμβιβασμούς στην ακρίβεια ή την απόδοση. Lredpfxeyzw E Ho Aarst

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang total: 3.200 mm, tinggi total: 2.400 mm, lebar total: 1.700 mm, berat keseluruhan: 1.500 kg, OVEN LISTRIK TRANSPORTASI MUDAH TANPA PERLU PERAKITAN!!! Sistem ini terdiri dari oven listrik industri dengan dimensi internal 1700 × 3200 × 2100 mm, yang dirancang untuk memberikan pemrosesan termal yang konsisten dan andal untuk aplikasi yang menuntut. Keunggulan utama oven ini adalah kemampuannya untuk dipindahkan dalam kondisi terpasang tanpa perlu perakitan ulang. Oven ini ditenagai oleh unit boiler listrik berperforma tinggi (2200 × 2100 × 300 mm), dilengkapi dengan 3 blok elemen pemanas (total 9 elemen pemanas), dengan total daya terpasang 27 kW. Konfigurasi ini memastikan distribusi panas yang seragam dan menyediakan energi yang cukup untuk operasi yang stabil dan efisien dalam beban kerja berkelanjutan. Untuk mengoptimalkan sirkulasi udara internal dan kinerja termal, sistem ini dilengkapi dengan 2 impeller Ø350 mm, digerakkan oleh 2 motor listrik berdaya 1,5 kW masing-masing (2 HP). Konsep ini menjamin dinamika aliran udara yang optimal, berkontribusi pada distribusi suhu yang homogen di seluruh ruang oven. Oven ini sepenuhnya terinsulasi menggunakan panel termal berdensitas tinggi setebal 180 mm, secara signifikan mengurangi kehilangan panas sekaligus memastikan efisiensi energi maksimum dan penyegelan ruang total. Konstruksi ini mendukung kondisi operasi yang stabil dan meminimalkan konsumsi energi. Selain itu, unit ini dilengkapi dengan panel kontrol canggih, dengan semua fungsi esensial dan parameter operasional. Antarmuka dirancang dengan fokus tinggi pada kemudahan penggunaan serta fleksibilitas operasional, memungkinkan operator untuk melakukan penyesuaian dan kontrol sistem dengan mudah sesuai kebutuhan produksi spesifik. Mengapa sistem ini unggul: - Output daya tinggi (27 kW) - Sistem aliran udara teroptimasi (motor ganda + impeller) - Isolasi tugas berat (panel 180 mm) - Sistem kontrol yang ramah pengguna dan lengkap Lrsdpfeyzw Ihsx Aarot - Dibangun untuk keandalan, efisiensi, dan kinerja industri

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Το σύστημα αποτελεί μια πλήρως ολοκληρωμένη, αυτόματη βιομηχανική γραμμή βαφής με πούδρα, σχεδιασμένη για παραγωγή υψηλής απόδοσης, σταθερότητα διεργασίας και άριστη ποιότητα τελικής επιφάνειας. Συνδυάζει πολυβάθμιο χημικό πλυντήριο προεπεξεργασίας, θάλαμο ηλεκτροστατικής βαφής πούδρας υψηλής απόδοσης, ελεγχόμενο θερμικό κλίβανο ωρίμανσης και εναέριο σύστημα μεταφοράς με ράγες για συνεχή ή κατανεμημένη προώθηση τεμαχίων. Το χημικό πλυντήριο προεπεξεργασίας είναι σχεδιασμένο ως πολυσταδιακή μονάδα προετοιμασίας επιφανειών, που περιλαμβάνει στάδια απολίπανσης, ξεβγάλματος, φωσφάτωσης και παθητικοποίησης. Είναι κατασκευασμένο από ανοξείδωτο χάλυβα υψηλής ποιότητας (AISI 304/316), διασφαλίζοντας μακροχρόνια αντοχή στα χημικά και δομική ανθεκτικότητα. Φυγοκεντρικές αντλίες υψηλής πίεσης σε συνδυασμό με βελτιστοποιημένες διατάξεις ακροφυσίων εξασφαλίζουν πλήρη και ομοιόμορφη κάλυψη ακόμη και πολύπλοκων γεωμετριών. Το σύστημα ενσωματώνει κλειστό κύκλωμα ανακυκλοφορίας χημικών, προηγμένες μονάδες φιλτραρίσματος και αυτόματη παρακολούθηση pH, αγωγιμότητας και θερμοκρασίας λουτρού, διασφαλίζοντας σταθερή ενεργοποίηση της επιφάνειας με ελάχιστη κατανάλωση χημικών και παραγωγή αποβλήτων. Ο θάλαμος ηλεκτροστατικής βαφής πούδρας έχει σχεδιαστεί για μέγιστη απόδοση μεταφοράς και ελάχιστη απώλεια υλικού. Διαθέτει σύστημα ανάκτησης πούδρας υψηλής απόδοσης (τύπου κυκλώνα ή φίλτρων κασέτας), επιτυγχάνοντας ποσοστά ανάκτησης άνω του 95%, μειώνοντας σημαντικά το κόστος λειτουργίας. Ο θάλαμος φέρει αντιστατική κατασκευή για την αποτροπή συσσώρευσης πούδρας και τη διασφάλιση σταθερής κατανομής ηλεκτροστατικού πεδίου. Είναι πλήρως συμβατός με χειροκίνητα και αυτόματα συστήματα ψεκαστικών πιστολιών, επιτρέποντας ευέλικτη ενσωμάτωση ανάλογα με τις απαιτήσεις της παραγωγής. Ο κλίβανος ωρίμανσης αποτελεί υψηλής απόδοσης θερμικό σύστημα, σχεδιασμένο ώστε να παρέχει ομοιόμορφη κατανομή της θερμότητας σε όλο το θάλαμο με απόκλιση θερμοκρασίας εντός ±2°C. Λειτουργεί με υποχρεωτική κυκλοφορία αέρα χρησιμοποιώντας βιομηχανικούς ανεμιστήρες υψηλής απόδοσης, εξασφαλίζοντας ομοιογενείς συνθήκες ωρίμανσης για όλα τα βαμμένα τεμάχια. Το σύστημα θέρμανσης μπορεί να διαμορφωθεί για φυσικό αέριο, πετρέλαιο ή ηλεκτρικές αντιστάσεις, ανάλογα με την ενεργειακή υποδομή. Πάνελ υψηλής πυκνότητας μόνωσης ελαχιστοποιούν τις θερμικές απώλειες, ενώ ο PLC αυτοματισμός επιτρέπει ακριβή διαχείριση προφίλ ωρίμανσης και επαναληψιμότητα διαδικασίας, εξασφαλίζοντας άριστη διασταύρωση πολυμερούς και επιφάνειες χωρίς ελαττώματα. Το εναέριο σύστημα μεταφοράς με ράγες προσφέρει συνεχή ή βηματική προώθηση τεμαχίων καθ’ όλη τη διάρκεια των διεργασιών. Είναι κατασκευασμένο με αλυσίδες βαρέος τύπου και εξαρτήματα ανθεκτικά σε υψηλές θερμοκρασίες, κατάλληλα για απαιτητικά βιομηχανικά περιβάλλοντα. Διαθέτει μεταβλητό έλεγχο ταχύτητας για βέλτιστο χρονισμό παραμονής σε κάθε ζώνη επεξεργασίας, βελτιώνοντας την απόδοση και συγχρονισμό της παραγωγής. Η εργονομική σχεδίαση του ελαχιστοποιεί τη χειροκίνητη διαχείριση και μεγιστοποιεί τη σταθερότητα της ροής παραγωγής. Lrsdpfx Asy Htg Djarst Από μηχανολογικής άποψης, η γραμμή είναι σχεδιασμένη για μέγιστη επιχειρησιακή αποδοτικότητα, μειωμένο κόστος ζωής και υψηλή αξιοπιστία διαδικασιών. Ενεργειακά βελτιστοποιημένα θερμικά συστήματα, κυκλώματα ανάκτησης χημικών και τεχνολογίες υψηλής απόδοσης βαφής μειώνουν σημαντικά τα συνολικά λειτουργικά έξοδα, διατηρώντας σταθερή ποιότητα επικάλυψης. Η αρθρωτή αρχιτεκτονική επιτρέπει μελλοντικές επεκτάσεις και προσαρμογές, καθιστώντας το σύσ

Kondisi: baru, Tahun pembuatan: 2026, el-to-en Lrodpfxsyaqt Te Aarjt

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, berat benda kerja (maks.): 500 kg, suhu: 250 °C, kapasitas pemanasan: 105 kW (142,76 hp), kebutuhan udara: 7.000 m³/jam, tinggi benda kerja (maks.): 1.600 mm, panjang benda kerja (maks.): 3.000 mm, Perlengkapan: pencahayaan, Sistem Pelapisan Bubuk Kompak (Sistem Lengkap) – Kabin, Oven Pemanggangan, Sistem Konveyor & Teknologi Gema Sistem lengkap untuk pelapisan bubuk manual pada komponen hingga panjang 3.000 mm dan beban berguna 500 kg per pembawa barang. Komponen merek terbaik (Gema, Siemens, Schneider Electric, Donaldson, Riello), termasuk pemasangan, uji coba, dan pelatihan operator. Ikhtisar & Konsep Dijual adalah sistem lengkap pelapisan bubuk manual baru untuk benda kerja hingga panjang 3,0 m. Sistem ini menggabungkan kabin pelapisan dengan sistem penyedotan yang efisien, oven pemanggangan gas berkinerja tinggi, serta sistem konveyor rel fleksibel termasuk konstruksi baja (desain/perencanaan sistem pelapisan bubuk individual sesuai permintaan dimungkinkan!). 1. Kabin Pelapisan Bubuk (Pelapisan Manual Dua Sisi) - Dimensi luar (P x L x T): 3.400 x 1.100 x 2.150 [mm] - Dimensi bukaan benda kerja: 500 x 1.600 [mm] - Sistem penyedotan & filter: 2x kipas radial @ 4.500 m³/h (versi ATEX, masing-masing 3 kW); 2 unit filter dengan total 6 filter Teflon antistatis (Donaldson, 325 x 660 [mm]) - Pembersihan: Pembersihan impuls udara terkompresi otomatis/manual (6 katup) - Keamanan/perlengkapan: Penerangan internal yang sesuai ATEX, peredam suara di area kipas, kontrol melalui panel kontrol dinding Siemens/Schneider Teknologi Pelapisan Bubuk Elektrostatik (Gema) (berdasarkan permintaan, produsen lain juga dapat disediakan) - 2x pistol genggam: Gema OptiSelect Pro dengan teknologi PowerBoost®, bersertifikat ATEX - 2x unit kontrol: Gema OptiStar 4.0 CG20 dengan kontrol arus presisi DVC dan PCC, 250 program memori, konektivitas aplikasi Lsdpfx Ajzu Imrearsrt - 2x injektor: Gema OptiFlow IG07 dengan kartrid pelepas cepat & anti lengket Oven Pemanggangan Konveksi (Oven ruang dengan pintu ganda) - Dimensi internal (P x L x T): 3.500 x 2.000 x 2.300 [mm] - Suhu maks. / suhu pengoperasian: hingga 250°C / 180 - 200°C - Pemanasan: Blok termal tidak langsung dengan burner Riello/Ecoflam (sekitar 105 kW (90.000 kcal/jam)) - Bahan bakar: Gas alam atau gas cair (LPG) (pasokan energi lain, misalnya listrik, dimungkinkan berdasarkan permintaan) - Sirkulasi udara: 2 x kipas sirkulasi udara 3.500 m³/jam (ditambah kipas pembuangan otomatis) - Isolasi: Isolasi wol batu 150mm Sistem Konveyor Manual termasuk konstruksi baja Kapasitas beban: Maks. 500 kg per pembawa barang Perlengkapan: 5 rel oven, 15 pembawa barang (masing-masing 3m), 3 troli pemindah silang Troli: Dilengkapi dengan bantalan tahan suhu tinggi Lingkup Pengiriman & Layanan / Poin Komersial Termasuk dalam harga: - Kabin dengan sistem penyedotan & unit filter - 2x peralatan pelapisan bubuk Gema - Oven pemanggangan termasuk blok termal & burner - Sistem konveyor termasuk konstruksi baja & troli - Pemasangan, uji coba & pelatihan operator di lokasi

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 1.500 mm, panjang benda kerja (maks.): 7.000 mm, en-sr-15-2024 Lrodpfewvaaiex Aarot

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. Lredpfx Aajfz Apqorst 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, de Ljdpfxsvlwkxe Aarjrt

Kondisi: baru, Tahun pembuatan: 2026, powder_coating_booth_kpp_desc Lrjdpfx Ajfy T Tbearet

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Lodpsfz U Tiefx Aarsrt Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. Lsdpfofz Dt Nex Aarjrt The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. Lodpfx Ajfz Dubsarsrt All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Ljdpfxsfz I Edj Aarjrt Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information about Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate fuel consumption and the overall operating costs. USB Memory Lrsdpfx Aaofzkrnsrst Every firing process is logged, and the process data can be transferred to a USB stick for evaluation on a PC. Each file is automatically created and corresponds to a single firing process, recording peak temperatures and exact times. The file is saved in *.csv format (Excel spreadsheet). This option is free for all buyers until the end of 2016; with other manufacturers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Problem with a batch? Not enough components coming out of the oven? Now you can review the precise parameters of the firing process—such as duration or potential issues. New! Timer Function You can set the start time so that the oven powers up automatically before the workday begins. Built by professionals for professionals. Automatic Exhaust System The exhaust system can be programmed to open a few minutes before the firing process ends, allowing the smoke to be removed from the chamber. The exhaust system can be controlled via the touch panel. Process Duration Timer Heating dynamics are used to calculate the process duration. The display shows when the firing process will end. Self-Closing Doors To open, simply pull the door. To close, just push gently—the door will close automatically. Exhaust Hood Above the Door (optional) To minimize heat loss in the production hall when opening the door, an exhaust hood above the door extracts hot air. Partition (optional) The partition is suitable for large ovens when you want to use only parts of the oven. The oven is equipped with a movable divider and special control system. 2-in-1 (optional) It's possible to use both chambers independently—for example, running the firing process in the first chamber while drying occurs in the second.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. Lrsdpfx Ajfz I D Djarjt In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Lrjdpfeflmdwox Aarot Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application Lredpfxjfz Nb Tj Aarst The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: bekas, Item; LC-01336-APV-PencampurBubuk Pencampur Bubuk APV PM+2 – Pencampur Bubuk/Cairan Baja Tahan Karat Produsen: APV Tipe: PM+2 Jenis mesin: Pencampur Bubuk / Sistem Pencampuran Bubuk-Cairan Bahan: Baja tahan karat Kondisi: Bekas Lokasi: Denmark Deskripsi Pencampur Bubuk APV Tipe PM+2 bekas, untuk pencampuran dan penggabungan bubuk ke dalam produk cair secara efisien. Bubuk dimasukkan melalui corong baja tahan karat dan dicampurkan ke dalam cairan yang bersirkulasi, memberikan pencampuran yang cepat dan efisien serta membantu menghasilkan produk yang homogen. Cocok untuk digunakan dalam industri susu, makanan, dan minuman untuk mencampurkan bubuk dan bahan kering ke dalam cairan. Contoh aplikasi meliputi: Ljdpez Epvmefx Aarort Bubuk susu Gula Penstabil Bahan makanan Bubuk larut dan bahan kering lainnya Unit ini diproduksi dari baja tahan karat dan dirancang untuk aplikasi pengolahan makanan yang higienis. Mesin ini tersedia dari stok kami di Denmark. Kondisi Peralatan bekas, dijual DALAM KONDISI APA ADANYA. Pengiriman EXW Denmark Pengiriman ke seluruh dunia dapat diatur dengan biaya ditanggung oleh pembeli. Silakan hubungi kami untuk harga, gambar tambahan, dimensi, dan informasi teknis yang tersedia.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 4.000 mm, panjang total: 40.000 mm, lebar total: 6.000 mm, Perlengkapan: dokumentasi / manual, Lini pelapisan listrik nikel–krom otomatis untuk dijual di Türkiye. Lini ini telah direkondisi sepenuhnya pada tahun 2025 dan berfungsi sebelum dibongkar. Seluruh peralatan sekarang telah dibongkar dan siap untuk dimuat. Ledpjz Ei Ngsfx Aarert Lini ini dilaporkan memiliki luas permukaan pelapisan 400–450 dm², kapasitas beban rak maksimum 1.000 kg, dan kapasitas produksi 8.000 dm² per jam. Luas area yang ditempati adalah 40 × 6 m (240 m²), dengan konsumsi listrik yang dilaporkan sebesar 80 kWh per jam operasi. Penjualan mencakup tangki proses, filter, penyearah arus, boiler air panas, sistem air murni, dan pompa dosis. Daftar peralatan mencakup enam penyearah arus nikel 1.300 A, dua penyearah arus krom 4.500 A, dan satu penyearah arus 3.000 A untuk penghilangan lemak elektrolitik. Pembeli bertanggung jawab atas transportasi dan pemasangan. Daftar peralatan terperinci dan presentasi tersedia berdasarkan permintaan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 642, Kami menjual mesin pemoles yang digunakan untuk memoles dan menghaluskan tepi potong pada perkakas pemotong presisi. Mesin ini terutama dirancang untuk perkakas karbida, baik untuk berbagai jenis mata bor maupun pahat. Mesin ini memungkinkan penggantian wadah yang mudah untuk pemolesan kasar atau halus. Mesin ini digunakan secara rutin, mudah dioperasikan, dan selalu berfungsi dengan baik. Ljdpfjz Eib Nex Aarsrt

Kondisi: bekas, Tahun pembuatan: 1989, Langkah-x 400 mm Langkah-y 400 mm Langkah-z 400 mm Luas permukaan penjepit meja 700 x 460 mm Dudukan spindel SK 40 Kecepatan putar spindel 31,5 - 5000 rpm Motor spindel 5,5 kW Langkah pinol 80 mm Kepala vertikal dapat diputar +/- 90° Lrjdoz Ekzkepfx Aarot Pengendali DIALOG 11 Kecepatan umpan x/y/z - variabel 3000 mm/min Kecepatan cepat 6 m/min Total kebutuhan daya 13,8 kVA Berat mesin sekitar 2 ton Dimensi mesin P x L x T 2,73 x 2,0 x 2,0 m Aksesori: meja tetap, kepala vertikal dengan penjepit alat hidrolik dan pinol yang dapat diperpanjang, pembagi indeks HOFFMANN, RW/NC 125 L, sistem pendingin