Beli Idra Mesin Die Casting bekas (79.459)

Kondisi: bekas, Tahun pembuatan: 2017, Heating capacity: 2 x 12 kW Cooling capacity: 2 x 35 kW Used heating and cooling unit from Robamat, designed for use with die casting machines. This dual-circuit unit is intended for temperature control of die casting moulds using water. The unit has been inspected, serviced, and repaired by the manufacturer’s authorized service partner. Bdodpey H Ra Ujfx Am Isb Available from stock Number of circuits: 2 Operating temperature up to max. 160°C Heating capacity: 2x 12 kW Cooling capacity: 2x 35 kW Voltage: 3x 400V / 50Hz Mould cycle stop RS485 interface Pump protection filter housing (new)

Kondisi: baru, Tahun pembuatan: 2020, elektro-ofen-meltec-zc50-uebersetzung Bdsdpjy E Tynefx Am Isb

Kondisi: baru, Tahun pembuatan: 2023, de-hu-1 Bedjy E Tyhjpfx Am Iedb

Kondisi: baru, Tahun pembuatan: 2022, de-hu-1 Bjdpfxey E Tybe Am Isdb

Kondisi: bekas, Tahun pembuatan: 2017, werkstueckgewicht-2000g-waage-giessmaschine-produktion-geprueft- instandgesetzt Bdsdpfxsy Diauo Am Iob

Kondisi: bekas, Tahun pembuatan: 2000, Clamping force: 900 kN Clamping plate: 540 x 540 mm Tie bar distance: 350 x 350 mm Machine weight: approx. 5.5 t Clamping stroke: 280 mm Ejector force: 60 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Injection force: 75 kN Injection stroke: 130 mm Injection plunger diameter: 50, 55, 60 mm Casting volume (DIN 24480): 119, 163, 214 cm³ Specific injection pressure: 380, 315, 265 kp/cm² Corresponding parting surface: 236, 285, 340 cm² Core pull stroke: 150 mm Completely overhauled die casting machine DAW 80 GO with DataLogic control for processing zinc alloys. Partial extract of the general overhaul: • Upgrade of the machine with a new control cabinet and new operator panel, including replacement of all electrical wiring • Renewal of hydraulics (blocks and valves) • Overhaul of the clamping unit (Detailed list available on request) The machine is equipped with the following options: • Motorised safety door, injection side left • Discharge chute cover on base frame (straight) • Standing operator panel • Discharge chute cover on base frame • Multi-chamber holding and melting furnace with TOC pump • Furnace control cabinet for furnace type Z • Use of water-glycol Bsdjyzt D Eepfx Am Iedb • Side GO • Wired signal interface for part removal (DISPO10) • RSD equipment package with switch • Spraymotion 611 E with servo drive, single-circuit • Release agent container TD 20 • Spray bar CR 275 Additional options are available on request.

Kondisi: siap digunakan (bekas), Frech mesin die casting seng ruang panas, berfungsi dengan baik. Bdsdoykvinjpfx Am Ijb

Kondisi: sangat baik (bekas), Mesin die casting seng ruang panas FRECH DAW 200T Bedpfxsyxkw Ds Am Ijdb

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 450 h, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 56.000 kg, Klemkraft: 11.168 kN Klemkraft: 1,138 Tonnen Auswerferkraft: 433 kN Max. Werkzeughöhe: 1.050 mm Min. Werkzeughöhe: 450 mm Plattengröße HxV: 1.620 x 1.620 mm Bjdpfx Aeu Svacjm Iedb Holmabstand: 1.000 x 1.000 mm Holmdurchmesser: 200 mm Beweglicher Plattenhub: 960 mm Auswerferhub: 230 mm Arbeitsdruck: 180 bar Trockentakt: 2,5 Zyklen/min Pumpenmotorleistung: 45 kW Maschinengewicht: 56 t Abmessungen der Maschine: 10,8 x 4,5 x 4,3 m

Kondisi: baru, Tahun pembuatan: 2025, Clamping force 240 kN Clamping plate 380x380 mm Distance between tie bars 250x250 mm Machine weight approx. 3.0 t Clamping stroke 180 mm Ejector force 28 kN Ejector stroke 50 mm Mould height 120–300 mm Tie bar diameter 45 mm Injection force 43 kN Injection stroke 85 mm Injection plunger diameter 36, 40, 45 mm Injection volume (DIN 24480) 47, 63, 87 cm³ Specific injection pressure 420, 340, 270 daN/cm² Corresponding parting surface 56, 70, 88 cm² De-moulding stroke 150 mm Machine equipment: 1.0.2 Clamping unit cover at machine base with scales / chute 1.0.3 Small parts cover in machine base 1.1.0 Motorized safety door in casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – Energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1.2 Injection assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling injection system 3.4.5 Simplified injection plunger removal 3.4.6 Injection plunger stop on return stroke 3.5.2 Electric nozzle and injection pot heating Bodpfx Aox Hp E Ajm Iodb 3.5.3 Plug-in connections for electric nozzle and injection pot heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for extraction device DISPO10 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Control unit with visualization on support arm 6.5.2 Equipment package RSD with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.1 Spray bar CR 155

Kondisi: baru, Tahun pembuatan: 2020, en Bdsdoiu Smbjpfx Am Isb

Kondisi: baru, Tahun pembuatan: 2018, Crucible capacity 420 kg As-new and unused machine furnace suitable for DAW20A or DAW20S. The Metec furnace, model Z20/120C, is equipped with a durable stainless steel crucible. Bodpfxetv Rlzs Am Isdb The crucible holds 420 kg, with a melting capacity of 120 kg/h at a connected load of 21.5 kW. A suitable control cabinet can be custom-built upon request.

Kondisi: bekas, Tahun pembuatan: 1995, Clamping force 2200 kN Bjdpfx Amovxlufe Iodb Clamping plate 755 x 755 mm Tie bar spacing 500 x 500 mm Machine weight approx. 8 t Clamping stroke 430 mm Ejector force 110 kN Ejector stroke 100 mm Mould height 250–600 mm Tie bar diameter 85 mm Injection force 130 kN Injection stroke 175 mm Injection plunger diameter 70, 80, 90 mm Injection volume (DIN 24480) 450, 636, 856 cm³ Specific injection pressure 335, 260, 203 kp/cm² Corresponding parting surface 656, 846, 1078 cm² Decompression stroke 230 mm Used die casting machine DAW 200 S with Datavario control system for use with zinc alloys. Available upon agreement Recommendation from the manufacturer: a general overhaul at an authorized overhaul facility is advised. The scope of refurbishment can be agreed upon as required.

Kondisi: bekas, Tahun pembuatan: 2007, Used electric sprayer Spraymotion 411 E for use on die casting machines. The device is function-tested by the manufacturer. Bdodpfx Aotwfknsm Isb Includes spray and blow bar (SR system with adjustable nozzles) and stand Connection: 24-pin plug Drive module: 400 mm stroke

Kondisi: bekas, Tahun pembuatan: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Distance between tie bars: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Injection plunger diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Bdodpfx Amotuxmyj Ijb Associated parting surface: 174, 214, 260 cm² Demolding stroke: 150 mm Used machine DAW 50 as a basis for complete refurbishment, without control cabinet, furnace, or furnace housing. A general overhaul can be carried out at the manufacturer’s overhaul facility. The scope of the overhaul can be defined as required.

Kondisi: baru, Tahun pembuatan: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Tie bar spacing: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mould height: 160–400 mm Tie bar diameter: 65 mm Casting force: 78 kN Casting stroke: 130 mm Plunger diameters: 50, 55, 60 mm Casting volume (DIN 24480): 147, 191, 241 cm³ Specific casting pressure: 396, 327, 275 daN/cm² Corresponding parting surface: 226, 274, 326 cm² Ejector stroke: 220 mm Machine Equipment 1.0.2 Clamping unit cover on base frame with integrated scale/slide 1.1.0 Motorized safety door on casting side, left 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector Advantage Package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of the clamping unit 3.0.1 Casting Assistance Advantage Package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified casting plunger removal 3.4.6 Casting plunger stop on return stroke 3.5.2 Electric nozzle and casting chamber heating 3.5.3 Plug-in connections for electric nozzle and casting chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control, 2+6 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit Bodpfxer Hwf Ae Am Iedb 6.3.1.1 Operator unit with visualization on support arm 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.3 Spray bar CR 275

Kondisi: bekas, Tahun pembuatan: 1994, Fungsionalitas: fungsi terbatas, Used Oskar Frech DAW 125 with control cabinet and crucible Bodswywn Eepfx Am Iodb

Kondisi: bekas, format-560x770mm Bdedjyxqupepfx Am Iob

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin perforasi Wire-o yang sangat bagus. Elektrik dengan pedal kaki, format maksimum 710 mm. Dapat mengebor hingga 20 lembar kertas 80 gram, lubang persegi. Tentu saja Anda dipersilakan untuk mencoba mesin ini di tempat kami. Kami dapat mengatur transportasi/pengemasan untuk Anda dan memuatnya ke dalam truk atau kontainer. Silakan minta harga sudah termasuk transportasi (lokasi: Belanda). Salam, Henk Hoos. Bjdpfsymn Hwsx Am Iedb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Sistem FEEDER PLUS Tim penjepit sisi operator yang dapat disesuaikan dengan referensi Centerline, dilengkapi kontrol kehadiran lembaran Tim pendorong di sisi berlawanan operator Detektor lembar ganda Sentralisasi dan penutupan peralatan die-cut Stasiun ekstraksi pemangkasan limbah dengan penguncian alat cepat Keluar tumpukan tinggi Bobst CUBE II Dinaikkan 35 cm Frame persiapan blank di luar mesin Format maksimum: 102x142 cm Format minimum: 50x70 cm Berat kertas minimum: 80 g/m² Berat karton maksimum: 2.000 g Ketebalan karton bergelombang maksimum: 4 mm Kecepatan maksimum: 7.000 lembar/jam Bdsdpfx Ajy D Ht Sjm Isb Tekanan maksimum: 600 ton Tersedia September/Oktober 2026

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), - BEKAS - CNC DIE SINKING EDM PERGERAKAN SUMBU X: 600 mm PERGERAKAN SUMBU Y: 400 mm Bsdoyy Th Ijpfx Am Iedb PERGERAKAN SUMBU Z: 500 mm MAKS BERAT ELEKTRODA: 50 kg MAKS BERAT BENDA KERJA: 2000 kg MAKS UKURAN BENDA KERJA: 1200 x 800 x 350 mm UKURAN TANGKI: 1280 x 850 x 390 mm UNIT KONTROL: VISION 5 BERAT: 5500 kg DIMENSI KESELURUHAN: 1800 x 2900 x 3200 mm AKSESORIS: SUMBU C CATATAN: OPSI PENAMBAHAN MAJALAH GANTI ELEKTRODA.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, jam operasional: 15 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MP.DBDO.00084, Ukuran 75 x 106 cm, Fungsi non-stop pada feeder dan delivery, Penyesuaian plat pemotong yang terintegrasi, Penyesuaian tekanan die-cutting bermotor, Konsep pengoperasian yang sederhana, Model dasar sudah dilengkapi dengan semua fungsi dan perlengkapan untuk mulai produksi, Waktu penyiapan singkat, Fleksibilitas tinggi berkat rentang material yang diperluas, Mendukung penggunaan alat die-cutting berukuran kecil. Bodpfxsyx Tp Aj Am Ijdb

Kondisi: bekas, Tahun pembuatan: 2015, de Bsdpfxjy Amnys Am Iedb

Kondisi: baik (bekas), Tahun pembuatan: 1966, Perangkat hot stamping foil Original Heidelberg Bdodpfxjy Ahmdj Am Ieb

Tahun pembuatan: 2000, Kondisi: baik (bekas), 1 Bedpfx Asyz Adnem Iedb