Beli Singer bekas (54)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mesin jahit industri Singer 191 D300AA untuk dijual Crjdpezkr Ekofx Akajh Dijual mesin jahit industri Singer 191 D300AA yang kokoh dan andal. Mesin ini dirancang untuk pekerjaan menjahit yang berat dan unggul dalam konstruksi yang stabil serta kinerja tinggi dalam penggunaan sehari-hari. Ideal untuk bengkel, penjahitan, atau penggunaan profesional. Mesin ini sangat cocok untuk jahitan lurus dan pekerjaan yang presisi pada berbagai jenis bahan. Dengan desain industri, mesin ini tahan lama, bertenaga, dan sangat cocok untuk penggunaan rutin. Penjualan dilakukan sesuai dengan kondisi yang terlihat pada gambar. Catatan: Penjualan pribadi. Tidak ada garansi, tidak ada jaminan, dan tidak ada pengembalian. Penjualan dilakukan dengan pengecualian segala bentuk tanggung jawab atas cacat produk.

Kondisi: baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 665182, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 500 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, tinggi total: 2.850 mm, panjang total: 3.300 mm, lebar total: 2.400 mm, berat keseluruhan: 9.000 kg, kecepatan spindel (maks.): 42.000 rpm, jumlah slot dalam magazin alat: 40, Perlengkapan: dokumentasi / manual, MESIN OPS INGERSOLL SPEED HAWK 650 CNC Codpfxjy Tvcus Akajrh - Catatan Penting: Spindel diganti pada tahun 2025 dengan biaya sekitar 40.000 EUR, sehingga jumlah jam penggunaan spindel sangat sedikit! - Dimensi palet: sekitar 320 x 320 mm - Palet dipasang pada meja putar - Dudukan: HSK-E 40 - Untuk data teknis lebih lanjut, lihat gambar - Dilengkapi dengan dokumentasi teknis - Dilengkapi dengan dudukan alat HSK-E 40 dan tiga palet Perhatian: Barang harus diambil pada tanggal antara 21 Juli dan 23 Juli 2026 pada tanggal yang akan disepakati. FCA D-73529 Schwäbisch Gmünd - dimuat di truk

Kondisi: baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 665001, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 450 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, berat benda kerja (maks.): 2.000 kg, tinggi total: 2.300 mm, panjang total: 3.300 mm, lebar total: 2.300 mm, lebar meja: 700 mm, panjang meja: 850 mm, beban meja: 2.000 kg, berat keseluruhan: 7.700 kg, kecepatan spindel (min.): 3.000 rpm, kecepatan spindel (maks.): 40.000 rpm, jumlah slot dalam magazin alat: 40, Perlengkapan: dokumentasi / manual, PUSAT PEMESINAN CNC OPS INGERSOLL OPS 650 - Jumlah alur-T pada meja: 5 - Dimensi alur-T: 18H12 - Jarak antara dudukan HSK dan meja: 550 mm - Dudukan spindel utama: HSK-E 40 - Akurasi pemosisian TP sesuai DIN ISO 230-2: 0,005 mm - Akurasi pengulangan: 0,002 mm - Untuk data teknis lebih lanjut, lihat data yang difoto Cedpey Tu Ddjfx Akaerh - Dilengkapi dengan dokumentasi teknis - Dilengkapi dengan meja kerja dan aksesori, seperti dudukan HSK-E 40, lengkap dengan perkakas - Dimensi meja kerja: sekitar 1500 x 900 x 1100 mm Perhatian: Barang harus diambil pada tanggal antara 21.07 dan 23.07.2026 pada tanggal yang akan disepakati. FCA D-73529 Schwäbisch Gmünd – dimuat di atas truk.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 18.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 574525, jarak pergerakan sumbu X: 420 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 400 mm, panjang total: 3.500 mm, lebar total: 2.100 mm, beban meja: 500 kg, Gantry Eagle 400 termasuk sistem penanganan MultiChange Light, tahun pembuatan 2024. Cedpfxjz Dazds Akajrh Nomor Seri: 574525 Nomor Seri Sistem Penanganan: 583328 Berat total sekitar 6000 kg, termasuk sistem penanganan. Tanggal mulai digunakan: 04/2024 Aksesori: Sistem penanganan MultiChange Light, 70 elektroda, dan 8 palet. Mesin ini dijual atas nama pemilik. Penawaran menarik – fleksibel & tanpa khawatir Kami tidak hanya menawarkan produk berkualitas tinggi, tetapi juga opsi pembiayaan yang disesuaikan dengan kebutuhan Anda. Baik itu pembayaran uang muka, pembayaran cicilan, atau model pembiayaan individual – bersama-sama, kami akan menemukan solusi yang tepat. Jika diminta, kami juga akan mengurus seluruh pengaturan transportasi. Mulai dari perencanaan hingga pengiriman yang andal, kami memastikan proses yang lancar dan tepat waktu, sehingga Anda tidak perlu khawatir tentang apa pun. 📞 Jangan ragu untuk menghubungi kami untuk informasi lebih lanjut atau penawaran tanpa kewajiban. Kami akan memberikan konsultasi secara pribadi dan profesional. Penjualan, perubahan, dan kesalahan dapat terjadi!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 520 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 1.000 kg, OPS Ingersoll Gantry Eagle 500 mesin EDM sinker dalam kondisi sangat baik. Sistem penahan 3R. Tahun pembuatan 2017. Dapat dilihat dalam keadaan sedang beroperasi. Cedpox Htfysfx Akaerh

Kondisi: bekas, Tahun pembuatan: 2000, VOLLSTÄNDIGE AUTOMATISCHE ANLAGE ZUM UMSÄUMEN, FALTEN UND VERPACKEN VON BETTWÄSCHE RÄUMUNGSVERKAUF, VERSAND IM JUNI Automat zum Umsäumen von Bettlaken: AKAB AK 244 2437..748 kurze Seite / 132 2438 lange Seite Baujahr 1991 Maximale Stoffbreite 240 cm, mit Singer Nähmaschine Leistung 170 Stück/h, Nähart Lockstich 6 Stück, Kettenstich- und Industrienähte Nähen in Längs- und Querrichtung Automat für Steppdeckennähte: AKAB Baujahr 1984, modernisiert 2005 mit moderner Omron-Steuerung mit Union Special Nähmaschine, AK 156 2009 kurze Seite, 188 2010 lange Seite Maximale Breite 180 cm Automat zum Umsäumen von Kissenbezügen: AKAB Baujahr 1983, modernisiert 2005 mit moderner Omron-Steuerung mit Falt- und Förderband Adler Nähmaschine Maximale Stoffbreite 240 cm, mit Faltstäben für 150 cm breite Stoffe AKAB AK: 198 1870 Nähen, 176 1871 Falten, 187 1874 Förderband Drehmaschine für Kissenbezüge: Supaturn SUP 3314 Baujahr 1999 Faltmaschine für Steppdeckenbezüge: Jentex Type 5*5, Maschine 42-103, Baujahr 2000 Maximale Artikelgröße 315 x 375 cm, minimale Größe 80 x 80 cm Falttisch für Faltmaschine Jomeks, Baujahr 2001 Faltmaschine für Kissenbezüge: JULIEN, Baujahr 1988 Für Kissenbezüge max. 110 x 120 cm Julien CT/708, Baujahr 1988 CT/707 Packstation für Kissenbezüge Packstation für Kissenbezüge mit Förderband und Rollen – siehe Bilder Packstation für Steppdeckenbezüge mit Förderband und Rollen – siehe Bilder Manuelle Nähmaschinen: Juki Lockstitch DLN-415-4 Yamato Overlock AZ 8003-04 DF Yamato Overlock YA AZ8003G-04DF/K2/SC10, Baujahr 2001 Global Ylisyrjäys OV-704-050 Hubwagen PV-12-3350 Crodpjy Hvaaefx Akaoh

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 1.703 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 2.000 kg, kapasitas tangki: 800 l, OPS INGERSOLL Gantry Eagle 800 tahun pembuatan: 2011 perpindahan: x, y, z 550 x 850 x 450 mm kontrol: Eagle Power Tec penukar elektroda: 20 unit sensor 3D Codpfx Aezgt Rmokaerh sensor 3D di atas meja magnet: 400 x 200 mm sumbu C penjepit erowa instalasi pemadam kebakaran remote control pendingin (chiller) termasuk sekitar 600/700 liter dielektrik termasuk lemari laci beserta isinya dokumentasi mesin dalam keadaan terhubung listrik untuk inspeksi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 152 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 665182, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 500 mm, kecepatan spindel (maks.): 42.000 rpm, jumlah slot dalam magazin alat: 40, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Penawaran mengikat untuk pengambilan tepat waktu antara tanggal 21 September dan 1 Oktober! Penggantian spindel seharga 40.000 € pada tahun 2025! Sejak saat itu, hanya sekitar 150 jam penggunaan spindel! RINCIAN TEKNIS Rentang perjalanan sumbu X: 650 mm Rentang perjalanan sumbu Y: 550 mm Rentang perjalanan sumbu Z: 500 mm Kecepatan umpan Kecepatan umpan sumbu X: 30 m/menit Kecepatan umpan sumbu Y: 30 m/menit Kecepatan umpan sumbu Z: 30 m/menit Spindel Pemasangan spindel: HSK-E 40 Kecepatan spindel: 42.000 RPM Waktu operasional spindel: 151 jam 20 menit 08 detik Penggantian spindel: 2025 Biaya penggantian spindel: sekitar 40.000 EUR Majalah perkakas Jumlah posisi perkakas: 40 Sistem palet Dimensi palet: sekitar 320 × 320 mm Penegangan palet: Meja putar RINCIAN MESIN Cedpfxez Aplxo Akajrh Tegangan listrik: 400 V Frekuensi listrik: 50 Hz Tegangan kontrol: 24 V DC Sekering maksimum: 63 A Daya sambungan: 38 kVA Dimensi dan berat Tinggi keseluruhan: 2.850 mm Panjang keseluruhan: 3.300 mm Lebar keseluruhan: 2.400 mm Berat mesin: 9.000 kg PERLENGKAPAN - Dokumentasi teknis - Buku panduan - Pemasangan perkakas HSK-E 40 - 3 palet Referensi eksternal: Demo - Lot 5

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, OPS INGERSOLL GANTRY EAGLE 800 Tahun Pembuatan 2022 Direkondisi Juli 2026 Kondisi prima, jam operasional sangat sedikit (1540 jam erosi) Sistem Kontrol EAGLE Powertec PC/NC 3060 Layar 22 inci dengan pengoperasian layar sentuh Pemrograman teknologi MultiProg Powertec pada PC/NC Pemrograman cepat Powertec Easy Burn Perangkat kendali genggam multifungsi Powertec Erosi manual dengan Powertec EAGLE Powertec - Generator pemolesan halus PT 60, 60 Ampere (Arus puncak 60 Ampere) Kecepatan tinggi (High Speed Jump) maks. 18.000 mm/menit Cedpfx Aozvctpjkajrh Rentang pergerakan (X, Y, Z) 550 x 850 x 450 mm Sistem pengukur linier pada semua sumbu Jarak antara meja dan penjepit elektroda min. 135 mm / maks. 585 mm Pengganti elektroda 20 posisi, majalah tipe piring Wadah kerja (P x L x T) 800 x 1.100 x 480 mm Meja kerja (P x L) 760 x 1.000 mm Kapasitas beban 2.000 kg Beban kepala 200 kg Dimensi mesin (P x L x T) 1.436 x 2.940 x 2.730 mm Sistem filter terintegrasi Aksesori: Erowa, Tipe UPC Production Chuck Sistem pemadam kebakaran CO2 24.09.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm Crjdomkixwspfx Akajh - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops Crsdpsmhhy Nsfx Akaeh = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 420 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 300 mm, beban meja: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Tahun pembuatan 2015 Direkondisi sepenuhnya pada bulan Agustus-September 2026 Sistem kontrol EAGLE Powertec PC/NC 3060 Layar 22 inci dengan pengoperasian layar sentuh Pemrograman teknologi MultiProg Powertec pada PC/NC Pemrograman cepat Powertec Easy Burn Perangkat kendali genggam multifungsi Powertec Erosi manual dengan Powertec EAGLE Powertec - Generator pemoles halus PT 60, 60 Ampere (60 Ampere arus puncak) Kecepatan lompat tinggi maks. 18.000 mm/menit Rentang pergerakan (X, Y, Z) 420 x 300 x 300 mm Sistem pengukuran linier pada semua sumbu Jarak antara meja / dudukan elektroda min. 135 mm / maks. 585 mm Pengganti elektroda 20 posisi, majalah berbentuk piring Wadah kerja (P x L x T) 650 x 500 x 340 mm Meja kerja (P x L) 550 x 470 mm Kapasitas beban 500 kg Beban kepala 200 kg Dimensi mesin P x L x T 1.436 x 2.940 x 2.730 mm Sistem filter terintegrasi Codpfxoz Azk He Akasrh Aksesoris: Sistem pemadam api CO2 Saat ini, mesin sedang dalam proses rekondisi. Gambar asli akan segera menyusul. 30.09.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level. Cjdpfxjh R Taqj Akaorh

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm Csdjmhhf Sepfx Akaerh - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Cedpfxsmhh Dts Akajrh - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, OPS INGERSOLL GANTRY EAGLE 800 Tahun pembuatan 2022 Direkondisi pada Juni 2026 Kondisi prima, sedikit digunakan (1540 jam waktu erosi) Pengontrol EAGLE Powertec PC/NC 3060 Layar 22 inci dengan pengoperasian layar sentuh Pemrograman teknologi MultiProg Powertec pada PC/NC Lobn Eozkftbe D T Uhorr Pemrograman cepat Powertec Easy Burn Perangkat kendali genggam multifungsi Powertec Erosi manual dengan Powertec Handheld EAGLE Powertec – Generator pemolesan halus PT 60, 60 Ampere (60 Ampere arus puncak) Kecepatan tinggi, lompatan maks. 18.000 mm/menit Jangkauan pergerakan (X, Y, Z) 550 x 850 x 450 mm Sistem pengukuran linier pada semua sumbu Jarak meja / dudukan elektroda min. 135 mm / maks. 585 mm Pengganti elektroda 20 posisi, majalah berbentuk piring Csdpsyzxd Dofx Akaorh Wadah kerja (P x L x T) 800 x 1.100 x 480 mm Meja kerja (P x L) 760 x 1.000 mm Kapasitas beban 2.000 kg Beban kepala 200 kg Dimensi mesin P x L x T 1.436 x 2.940 x 2.730 mm Sistem filter terintegrasi Aksesori: Erowa, Tipe UPC Production Chuck Sistem pemadam kebakaran CO2 30.09.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) Cjdpfxomhh Dho Akajrh - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) Cedpfomhhx Iex Akaorh - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth Cjdpfx Akemhh Ansajrh - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (floor anchors not included) - With assembly instructions and load labels C4 according to DIN standard Crodpfxomhhyae Akaeh - Technical telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freighting with pre-delivery notification. Materials are packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchoring, and able to absorb the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the subfloor as well as any permits required by authorities. Rack uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, usable depth 1,000 mm - 12 cantilever arms, usable depth 1,000 mm, standard - Including horizontal and diagonal braces for 1,300 mm bay distance - Fastening material (bolts, nuts, and washers) Codpfx Aomhh Dzekaerh - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions possible at any time) - (*Offer available in larger quantity: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm bay distance - Rack length = 4,000 mm - Including fasteners (without floor anchors) - With assembly instructions and C4 load capacity labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance notification prior to delivery. The material is sensibly packed to facilitate easy unloading. If installed outdoors, the load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, and suitable for anchor fixing, and must support the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither required nor recommended. According to professional association guidelines, the top storage level should have at least a 500 mm overhang above the top of the upright.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jam operasional: 50.000 h, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan spindel (maks.): 40.000 rpm, 🔧 Technical Data Machine type: CNC milling machine Axes: 3 axes (X/Y/Z) Travel paths (X/Y/Z): 👉 approx. 550/400/400 mm (typical for this model, please confirm if required) Machine number: 655083 Year of manufacture: 2010 Power supply: 400 V / 3~ / 50 Hz Fuse: 63 A Power consumption: 32 kVA Machine weight: approx. 7,000 kg 🌬️ Extraction and filtration system (major advantage) Manufacturer: KELLER Lufttechnik Type: L-CUT-1-P3-B60-V Motor power: 3.3 kW Year of manufacture: 2010 👉 Integrated dust / fume extraction 👉 Significantly cleaner working environment 👉 Ideal for continuous operation in tool making 🧩 Features CNC control with operator panel 3-axis machining Codpfx Asyxyz Sjkasrh Compact and robust construction Complete system including extraction unit Made in Germany 📦 Condition Machine from ongoing production Fully functional Well maintained Inspection under power possible 🚛 Delivery Available at short notice Free loading onto truck 📌 Applications Mould making Electrode machining Precision processing 📞 Note Further pictures, videos and technical details on request. Subject to prior sale.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Cedpfx Akoh Ek Dajaerh Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.510 mm, jarak gerak sumbu Z: 650 mm, berat benda kerja (maks.): 7.500 kg, tinggi total: 3.900 mm, lebar total: 2.950 mm, panjang total: 3.430 mm, Perlengkapan: dokumentasi / manual, OPS Ingersoll Gantry 1200 EDM machine for sale, year of manufacture 2004, comprehensively overhauled in 2016. Cedpfjvwa Nbox Akaorh The machine was in perfect working order until recently and remains in excellent condition. On-site inspection is possible; however, please note that the machine is currently not connected to power.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Codpomidyfefx Akasrh Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.