Beli Krauss Maffei Km 320-2000 Pa Cn bekas (24.298)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
Krauss MaffeiKM 320-2000 PA CN
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, KraussMaffei KM 320-2000 PA CN Injection Moulding Machine
Year of manufacture: 2025
Machine equipped with a five-point, double toggle clamp system (three-plate design) with a servo-electric drive for the clamping unit.
Injection unit fitted with servo-electric drives for injection, plasticizing, and unit movement.
Control system: MC P1 – industrial computer, real-time Ethernet.
Plasticizing system
Cgedpfxoyft Nzs Ag Dot
Complete system for thermoplastics
Screw diameter: 70 mm
Nozzle radius: 15 mm
Nozzle orifice: 6 mm
Clamping unit
Clamping force: 3,200 kN
Mould opening force: 480 kN
Platen dimensions (H × V): 1,084 × 1,034 mm
Tie bar clearance (H × V): 820 × 770 mm
Mould opening stroke: 650 mm
Mould height (min.–max.): 300–700 mm
Daylight: 1,350 mm
Ejector stroke: 240 mm
Ejector force: 63 kN
Ejector speed: 300 mm/s
Injection unit
Screw diameter: 70 mm
L/D ratio: 20.0
Injection pressure: 1,877 bar
Injection volume: 1,078 cm³
Shot weight: 981 g
Injection speed: 160 mm/s
Injection rate: 616 cm³/s
Screw rotation speed: 191 rpm
Plasticizing capacity: 65.9 g/s
Nozzle contact force: 57 kN
Electrical parameters
Connected load: 55.7 kW
Installed heater power: 29.2 kW
Number of heating zones (cylinder): 6
Dry cycle time (EUROMAP 6): 2.39 s / 574 mm
Weight and dimensions
Net weight with control cabinet: 23.2 t
Machine dimensions (L × W × H): 7.57 × 2.22 × 2.32 m
Machine in a modern servo-electric configuration, ensuring high precision, energy efficiency, and process repeatability.
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 420-2000 CX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX
Basic Information
Manufacturer: Krauss Maffei
Model: KM 420-2000 CX
Machine number: 61030600
Year of manufacture: 2018
Control system: MC6
Control panel: Colour monitor integrated with operator console
The machine is equipped with a fully hydraulic clamping system and a state-of-the-art MC6 control system.
Plasticising Unit
Complete plasticising unit dedicated to thermoplastics processing.
High-performance screw: HPS-UN
Screw diameter: 60 mm
Non-return valve: yes
Nozzle type: open
Nozzle radius: 15 mm
Nozzle orifice: 6 mm
Injection unit: SP 2000
Clamping Unit
Clamping force: 4200 kN
Mould opening force: 250 kN
Platen dimensions (horizontal × vertical): 1270 × 1230 mm
Tie bar clearance (horizontal × vertical): 800 × 800 mm
Maximum mould opening stroke: 1020 mm
Minimum mould height: 580 mm
Maximum platen opening stroke: 1600 mm
Ejector stroke: 250 mm
Ejector force (forward / return): 95 / 49 kN
Cgodpfx Agsyugkws Dot
Injection Unit
Screw diameter: 60 mm
L/D ratio: 23.3
Injection pressure: 2420 bar
Injection volume: 792 cm³
Shot weight (PS): 720 g
Injection speed: 130 mm/s
Injection flow rate: 368 cm³/s
Screw speed: 285 rpm
Plasticising capacity: 72.2 g/s
Nozzle contact force: 82 kN
Electrical and Hydraulic Equipment
Rated pump motor power: 75 kW
Installed heater capacity: 29 kW
Number of barrel heating zones: 6 (+1 extended nozzle)
Dry cycle time (EUROMAP 6): 3.0 s / 560 mm
Required hydraulic oil volume: 1000 l
Dimensions and Weight
Net weight (incl. control cabinet): 21.5 t
Machine dimensions (length × width × height):
6.90 × 2.49 × 2.38 m
Maximum mould weight: 6700 kg
Optional ESS Energy Saving System (Energy Saving Systems)
The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines.
The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed according to the current demand during the production cycle.
Key Benefits
- Reduction of electricity consumption by up to 30%
- Servo drive technology for hydraulic pump
- World-class quality and proven industrial technology
- Reduced energy losses during idle operation
- Lower heating of the hydraulic system
- Extended lifespan of hydraulic components
- Can be installed on existing hydraulic injection moulding machines
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 1300-12000 MX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX
Control system: MC5
Year of manufacture: 2012
Clamping unit:
Clamping force [kN]: 13,000
Tie bar distance (H x V) [mm]: 1,570 x 1,270
Platen dimensions (H x V) [mm]: 2,210 x 1,910
Min./Max. mould height [mm]: 700–1,400
Max. daylight opening [mm]: 3,050
Max. ejector stroke [mm]: 350
Injection unit:
Screw diameter [mm]: 105
Injection volume [cm³]: 5,195
Shot weight PS [g]: 4,728
Injection pressure [bar]: 2,296
Max. injection speed [g/s PS]: 186
Electrical & hydraulic equipment:
Pump motor rated power [kW]: 132
Screw drive motor rated power [kW]: 145
Heater capacity [kW]: 71
Cgedpsy Hqwyefx Ag Det
Dimensions and weight:
Net weight incl. control cabinet [t]: 70
Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82
Additional equipment:
Parallel movements: Independent hydraulic screw drive
Hot runners: 12 integrated temperature control zones
Cores: 3 hydraulic circuits (2 on the moving platen, 1 on the fixed platen)
Pneumatics: 2 air valves (blow-off) + 1 valve for hot runner shut-off nozzle
Hydraulic accumulator
Cooling: 20 rotameter cooling circuits (10 for fixed platen + 10 for moving platen)
Interfaces: Euromap 67 and Euromap 18
Insulation: BluePower – barrel thermal insulation

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 1100-12000 MX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Injection Moulding Machine KRAUSS MAFFEI KM 1100-12000 MX
Basic Specifications
Manufacturer: Krauss Maffei
Model: KM 1100-12000 MX
Year of manufacture: 2008
Control system: MC5
Control panel: colour screen integrated with the operator console
Interfaces: 3 USB ports
The machine is equipped with a fully hydraulic clamping system and a complete plasticising unit for thermoplastics processing with abrasion protection.
Clamping Unit
Clamping force: 11,000 kN
Mould opening force: 770 kN
Codpfx Ajyugfzjg Dogt
Platen dimensions (horizontal × vertical): 2210 × 1910 mm
Tie bar spacing (horizontal × vertical): 1550 × 1250 mm
Mould opening stroke: 2000 mm
Minimum mould height: 600 mm
Maximum mould height: 1200 mm
Platen stroke: 2600 mm
Ejector stroke: 300 mm
Ejector force: 220 / 110 kN
Injection Unit
Screw diameter: 120 mm
Maximum injection pressure: 1758 bar
Injection volume: 6786 cm³
Shot weight (PS): 6175 g
Screw speed (standard / option): 103 / 145 rpm
Injection rate (standard): 1118 cm³/s
Injection rate (with accumulator): 1696 cm³/s
Electrical and Hydraulic Equipment
Rated pump motor power: 132 kW
Installed heating power: 82 kW
Number of barrel heating zones: 7
Dry cycle time (EUROMAP): 802 cycles/h
Hydraulic oil tank capacity: 2440 l
Machine Dimensions and Weight
Net weight (incl. control cabinet): 73 t
Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m
Optional ESS (Energy Saving Systems)
The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines.
The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor speed to current demand throughout the production cycle.
Key Benefits
- Reduction of electricity consumption by up to 30%
- Hydraulic pump servo drive technology
- Globally recognized, proven technology applied in plastics processing industry
- Decreased energy losses during idle operation
- Lower heating of the hydraulic system
- Extended service life of the motor and hydraulic components
- Can be retrofitted to existing hydraulic injection moulding machines
The ESS system enables significant reduction of operating costs while maintaining full production performance parameters.
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 1300-12000 MX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en001
Cgodoyrrwkepfx Ag Dot
Iklan kecil
Łódź
10.400 km
Mesin cetak injeksi
KraussMaffeiKM 250-2000 CX Blue Power
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans
Year of manufacture: 2019
Injection unit:
Screw diameter: 70 mm
Shot weight: 980 g
Injection pressure: 1877 bar
Metering volume: 1077 ccm
Clamping unit:
Clamping force: 250 t
Tie bar spacing: 630x630 mm
Platen size: 995x1050 mm
Ejector: hydraulic
Clamping unit: hydraulic
Control system: MC6 - touchscreen
Additional equipment:
Very good technical condition
Operating hours: approx. h in automatic mode
Euromap 67
Robot interface
Air valve with vacuum measurement x 1
Air valve x 1
Hydraulic core pull x 3
Pneumatic core pull x 1
Controller with 16 hot runner zones
Injection unit hardened – bimetallic
Energy-efficient machine – features a system with 3 variable output hydraulic pumps
Parallel movements
Cgodpfx Aoy Dqiwjg Det
Proportional valve on the injection unit – for precise injection
Additional oil cleaning pump
Robot: Sepro Industrial Robot SR S5-35HL S4 Trans
Year of manufacture: 2015
5-axis robot: 4 axes powered by servo motors (electric): X, Y, Z, B; axis C
Touch panel controller
Robot safety package
Robot with adapter, conveyor belt, and safety enclosure
Purchase of robot and conveyor at additional cost
Dimensions:
Weight: 20,100 kg
Length/width/height: 6.50x2.20x2.30 m
All machines offered are put into operation by our service technicians prior to sale.
It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź.
Price: On request
Iklan kecil
Cantabria
12.280 km
Mesin cetak injeksi
KraussMaffeiKM 420-2000 CX
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 6.200 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.200 kN, diameter sekrup: 75 mm, Krauss-Maffei KM 420-2000 CX
Injection molding machine from Krauss-Maffei with 420 tons clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control unit. Screw diameter: 75 mm. Extras: 8 hot runner zones, 2 core pulls on the fixed platen, 2 core pulls on the moving platen, 1 pneumatic valve on the moving platen. The machine is delivered RE-Conditioned by the technical expert team of UK Transitus. Optionally, we can offer on-site commissioning at the customer's facilities, ensuring reliable operation upon installation completion.
Technical Details
SCREW DIAMETER: 75 mm
INJECTION PRESSURE: 1635 BAR
INJECTION VOLUME: 1237 cm³
SHOT WEIGHT: 1126 g
MAX. PLATEN DISTANCE: 1400 mm
MIN. MOLD HEIGHT: 380 mm
OPENING STROKE: 1020 mm
TIE BAR DISTANCE: 900 x 800 mm
PLATEN DIMENSIONS: 1270 x 1230 mm
Cedpfxewq D Efe Ag Djgt
SCREW DIAMETER: 75 mm
CLAMPING FORCE: 4200 kN
YEAR OF MANUFACTURE: 2008
OPERATING HOURS: 6,282
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 80 / 380 PA G01
Hubungi
Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036679, gaya penjepit: 1.600 kN, diameter sekrup: 40 mm, volume langkah: 393 cm³, tekanan injeksi: 1,892 batang, berat injeksi: 358 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 500 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 9.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer!
As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines:
The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, allowing you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine is suitable for diverse applications, such as packaging, electrical and electronics industries, medical technology, and automotive sector.
Your advantages:
– Optimised price-performance ratio for a wide range of applications
– High energy efficiency due to the all-electric machine concept
– Ability to meet demanding delivery deadlines thanks to a base machine concept with a broad spectrum of options
TECHNICAL DATA:
KM 160 / 750 PA G01 (Order 38670011)
(Machine No.: 61036683, new, YOM 2013)
CONTROL SYSTEM
■ MC P1 with 15” TFT colour display, multitouch functionality
CLAMPING UNIT
■ Clamping force: kN 1600
■ Max. mould opening force: kN 120
■ Clear space (H x V): mm 570 x 520
■ Mounting platen size (H x V): mm 770 x 720
■ Mould installation height min. - max.: mm 200 - 500
■ Max. opening width: mm 950
■ Max. mould opening stroke: mm 450
■ Ejector drive: electric
■ Ejector stroke: mm 100
■ Ejector force fwd/back: kN 33 / 33
■ Ejector speed fwd/back: mm/s 300 / 300
■ Max. mould weight: kg 1200
INJECTION UNIT
■ Screw diameter / type: mm 50 / standard
■ Effective L/D ratio: 20.2
■ Injection pressure: bar 1892
■ Shot volume: cm³ 393
■ Shot weight at max. stroke for PS: g 358
■ Injection speed: mm/s 200
■ Injection flow rate: cm³/s 393
■ Screw drive/speed: rpm 267
■ Plasticising capacity (standard screw): g/s 36.5
■ Nozzle contact force: kN 42
ELECTRICAL SPECIFICATIONS
■ Connected load: kW 31.2
■ Installed heating capacity: kW 15.5
■ Power supply: V / Hz 400 / 50, 3 phases with neutral
DIMENSIONS & WEIGHT
■ Net weight incl. electrical cabinet: t 9.7
■ Length x width x height: m 5.65 x 1.82 x 1.95
ADDITIONAL EQUIPMENT
■ Wear-resistant plasticising unit
■ BluePower full insulation of plasticising cylinder
■ Open nozzle
■ Air valve 1-fold (BWAP)
■ Pneumatic hot runner shut-off control 1-fold
■ Electrical interface for pneumatic cascade 4-fold
Cgsdpfx Aoyzz Irjg Dot
■ Euromap handling interfaces E18 + E67
■ Euromap interface (central computer) E67, E77
■ Water manifold 4-fold
■ Electrical pre-wiring for hydraulic auxiliary unit
■ Automatic central lubrication
■ Adaptive Process Control (APC)
■ Injection compression moulding circuitry
■ Graphic analysis package
■ Swivelling device for injection unit
The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request.
We look forward to your enquiry.
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 80 / 380 PA G01
Hubungi
Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036946, gaya penjepit: 800 kN, diameter sekrup: 40 mm, volume langkah: 201 cm³, tekanan injeksi: 1.860 batang, berat injeksi: 183 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.850 mm, berat keseluruhan: 5.600 kg, kapasitas pemanasan: 11,5 kW (15,64 hp), jenis penggerak: Vollelektrisch, bentang bebas: 735 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer!
As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines:
The precisionMolding base injection moulding machine offers the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. This machine can be used in a wide variety of application areas such as packaging industry, electrical and electronics industry, medical technology, and automotive industry.
Your benefits:
– Optimised price-performance ratio for a broad range of applications
– High energy efficiency thanks to an all-electric machine concept
– Fast delivery times through a base machine concept with a wide range of options
TECHNICAL DATA:
KM 80 / 380 PA G01 (Order 38670023)
CONTROL UNIT
- MC P1 with 15” TFT colour display with multi-touch functions
CLAMPING UNIT
- Clamping force: kN 800
- Max. mould opening force: kN 120
- Tie bar spacing (h x v): mm 470 x 420
- Platen size (h x v): mm 610 x 560
- Min. – max. mould height: mm 150 – 400
- Opening stroke: mm 750
- Max. mould opening stroke: mm 350
- Ejector drive: electric
- Ejector stroke: mm 100
- Ejector force forward/backward: kN 22 / 22
Cjdpfoud H Dmox Ag Dogt
- Ejector speed forward/backward: mm/s 300 / 300
- Max. mould weight: kg 600
INJECTION UNIT
- Screw diameter/type: mm 40 / Standard
- Effective L/D ratio: 20.0
- Injection pressure: bar 1860
- Shot volume: cm³ 201
- Shot weight at max. stroke for PS: g 183
- Injection speed: mm/s 200
- Injection flow rate: cm³/s 251
- Screw drive/speed: rpm 334
- Plasticising rate (standard): g/s 24.7
- Nozzle contact force: kN 34
ELECTRICAL PARAMETERS
- Connected load: kW 20.6
- Installed heating capacity: kW 11.5
- Power supply: V / Hz 400 / 50 3-phase with neutral conductor
WEIGHT AND DIMENSIONS
- Net weight with control cabinet: t 5.6
- Length x width x height: m 4.75 x 1.67 x 1.85
ADDITIONAL EQUIPMENT
- Low-wear plasticising unit
- BluePower full insulation of plasticising cylinder
- Open nozzle
- Air valve 1-fold (BWAP)
- Pneumatic control for hot runner shut-off 1-fold
- Electrical cascade interface 4-fold
- Euromap interface for handling E18, E63
- Euromap interface (central computer) E67, E77
- Water battery 4-fold
- Automatic central lubrication
- Adaptive Process Control (APC)
- Injection-compression control
- Graphic analysis package
The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request.
We look forward to your enquiry.
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 80 / 250 PA G01
Hubungi
Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036936, gaya penjepit: 800 kN, diameter sekrup: 35 mm, volume langkah: 135 cm³, tekanan injeksi: 1.837 batang, berat injeksi: 123 g, tinggi cetakan (min.): 150 mm, gaya ejektor: 22.000 N, lintasan ejektor: 100 mm, langkah pembukaan: 750 mm, tinggi pemasangan: 400 mm, panjang total: 4.750 mm, lebar total: 1.670 mm, tinggi total: 1.820 mm, berat keseluruhan: 5.900 kg, kapasitas pemanasan: 8,9 kW (12,10 hp), jenis penggerak: Vollelektrisch, bentang bebas: 470 mm, berat alat: 600.000 g, Plastics injection moulding machines directly from the manufacturer!
As the manufacturer KraussMaffei, we offer you our inspected and versatile stock machines:
The precisionMolding base injection moulding machine provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. The machine can be utilised in a wide range of applications, such as packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits:
– Optimised cost-performance ratio for a broad spectrum of applications
– High energy efficiency through an all-electric machine concept
– Fast lead times thanks to the base machine concept with a wide range of options
TECHNICAL DATA:
KM 80 / 250 PA G01 (Order 38670013)
(Machine no.: 61036936, new, YOM 2023)
CONTROL SYSTEM
MC P1 with 15” TFT colour display featuring multi-touch functionality
CLAMPING UNIT
Clamping force kN 800
Max. mould opening force kN 120
Daylight (h x v) mm 470 x 420
Platen size (h x v) mm 610 x 560
Mould installation height min.-max. mm 150 - 400
Max. opening stroke mm 750
Max. mould opening stroke mm 350
Ejector drive electric
Ejector stroke mm 100
Ejector force fwd/rev kN 22 / 22
Ejector speed fwd/rev mm/s 300 / 300
Max. mould weight kg 600
INJECTION UNIT
Screw diameter / type mm 35 / standard
Effective L/D ratio 20.0
Injection pressure bar 1837
Shot volume cm³ 135
Shot weight at max. stroke for PS g 123
Injection speed mm/s 200
Injection flow cm³/s 192
Screw drive / speed rpm 382
Plasticizing rate (standard screw) g/s 19.5
Nozzle contact force kN 30
ELECTRICAL PARAMETERS
Connected load kW 17.8
Cjdpeuggb Dsfx Ag Djgt
Installed heating power kW 8.9
Power supply V / Hz 400 / 50 3 phases with neutral
WEIGHT AND DIMENSIONS
Net weight with control cabinet t 5.9
Length x width x height m 4.75 x 1.67 x 1.82
ADDITIONAL EQUIPMENT
Wear-resistant plasticizing system
BluePower full insulation for plasticizing cylinder
Open nozzle
1-fold air valve (BWAP)
1-fold pneumatic control for hot runner shut-off
4-fold electric interface for cascade control
Electrical pre-installation for hydraulic auxiliary unit
Euromap interface for handling E18, E63
Euromap interface (host computer) E67, E77
4-fold water manifold
Automatic central lubrication
Adaptive Process Control (APC)
Injection compression moulding switch
Graphic analysis package
Swing-out injection unit
The machine is located at our plant in Parsdorf and is available at short notice. Additional optional features can be offered on request.
We look forward to your enquiry.
Iklan kecil
Vaterstetten
10.982 km
Mesin cetak injeksi
KraussMaffei Technologies GmbHKM 650 / 2000 / 2000 GXW G06
Hubungi
Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer!
As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines:
The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining.
TECHNICAL DATA:
KM 650 / 2000 / 2000 GXW G06 (Order 38618339)
CONTROL SYSTEM
- MC 6 with 24” TFT color screen, multitouch functionality
CLAMPING UNIT
- Clamping force kN 6500
- Maximum mold opening force kN 455
- Daylight (H x V) mm 1110 x 960
- Mounting platen (H x V) mm 1540 x 1440
- Mold height (min. - max.) mm 1550 (without center platen)
- Maximum opening stroke mm 3200
- Maximum mold open distance mm 1650
- Maximum mold weight kg 22000
INJECTION UNIT 1 SP2000
- Screw diameter / type mm 60 / Thermoplastic
- Effective L/D ratio 23.3
- Injection pressure bar 2420
- Shot volume cm³ 792
- Shot weight (max. stroke, PS) g 720
- Injection speed mm/s 140
- Injection flow rate cm³/s 396
- Screw drive speed 1/min 285
- Plasticizing throughput g/s 72.2
- Nozzle contact force kN 82
INJECTION UNIT 2 SP2000
- Screw diameter / type mm 70 / Thermoplastic
- Effective L/D ratio 20
- Injection pressure bar 1877
- Shot volume cm³ 1078
- Shot weight (max. stroke, PS) g 981
- Injection speed mm/s 140
- Injection flow rate cm³/s 539
- Screw drive speed 1/min 285
- Plasticizing throughput g/s 98.3
- Nozzle contact force kN 82
ELECTRICAL PARAMETERS
- Connected load kW 341
- Power supply V / Hz 400 / 50 3-phase with neutral conductor
WEIGHT AND DIMENSIONS
- Net weight t 43.5
- Length x width x height m 11.89 x 3.22 x 2.77
ADDITIONAL EQUIPMENT
- Wear-resistant plasticizing unit
- BluePower full insulation for plasticizing cylinder
- Open nozzle
- BluePower ServoDrive
- Pneumatic valve 1-fold (BWAP), 1-fold (FWAP)
- Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP)
- Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP)
- Mold heating 96-fold (3.5 kW each)
- Euromap interface for handling E18
- Euromap interface (central computer) E67, E77, E78, E63, E82.1
- Adaptive Process Control (APC+)
- Graphics analysis package
- Sliding table with servo-driven turning unit
- Vertical center platen
- Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen
- ColorForm interface: signal interface for connection of an RPM system
- Electrical interface for HRS-Flexflow system
- Electrical interface and hydraulic valves for “1-K Dummy Operation”
- Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation
The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request.
Cgsdsw U N Ixspfx Ag Dst
We look forward to your inquiry.
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 420-2700 C2
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2002, wtryskarka-krauss-maffei-km-420-2700-c2
Cgsdsy I Tq Ejpfx Ag Det
Iklan kecil
Trenčianske Stankovce
10.519 km
Krauss Maffei KM 1150/4300 MX (2014)
KraussMaffeiKM 1150/4300 MX
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2014, 1
Cjdpfxoy Epp As Ag Dogt
Iklan kecil
Eschweiler
11.315 km
Mesin cetak injeksi
Krauss MaffeiKM 300 - 1400 C1
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 66.160 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, volume langkah: 679 cm³, Clamping force 3000 kN
Maximum tool opening force 160 kN
Moving platen opening force 86 kN
Moving platen closing force 68 kN
Mounting platen (H x V) 995 x 1050 mm
Clear width (H x V) 630 x 630 mm
Mold opening stroke 820 mm
Minimum mold installation height 330 mm
Opening width: 1150 mm
Ejector stroke 200 mm
Ejector force forward/backward 58 kN
Injection unit:
Screw diameter 60 mm
L/D ratio 21
Injection pressure 2000 bar
Shot volume 679 ccm
Shot weight (PS) 618 g
Injection flow rate 325 ccm/s
Screw speed 259 rpm
Plasticizing rate 58 g/s
Nozzle contact force 110 kN
Electrohydraulic equipment:
Nominal power of pump motor 45 kW
Installed heating power 23 kW
Temperature control zones for barrel heating 6
Oil capacity 720 liters
Dimensions and weights:
Space requirement approx. 6.20 x 2.20 x 2.40 m
Total weight 12500 kg
Maximum mold weight 3430 kg
Cedpfxoy Nk Uqs Ag Degt
Accessories:
- Oscillation elements
- 10-fold water manifold
Additional equipment:
- 1 x air valve
- 3 x core pulls
- 3 x hot runner controllers
- Robot interface compliant with Euromap 67
Iklan kecil
Cantabria
12.280 km
Mesin cetak injeksi
KraussMaffeiKM 1150/4300 MX
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2014, jam operasional: 35.000 h, Fungsionalitas: berfungsi sepenuhnya, Krauss-Maffei KM 1150/4300 MX
Codjy Efkropfx Ag Djgt
Mesin Injeksi Horizontal dari Krauss-Maffei dengan gaya penutupan 1150 ton. Tahun pembuatan 2014. Jam kerja: 35.640. Kontrol MC6. Fitur tambahan: Robot ABB 6 sumbu, 24 zona Hot Runner, sekuensial 10 pneumatik + 10 hidrolik. Dapat diperlihatkan dalam produksi.
Rincian Teknis
GAYA PENUTUPAN: 11500 kN
JAM KERJA: 35.600
DIAMETER SEKRUP: 90 mm
TEKANAN INJEKSI: 1839 BAR
VOLUME INJEKSI: 2290 cm3
BERAT INJEKSI: 2084 gr
LANGKAH PEMBUKAAN: 2000 mm
DIMENSI PLATEN: 2210 x 1910 mm
KETEBALAN CETAKAN MINIMUM: 600/1200 mm
TAHUN PEMBUATAN: 2014
Iklan kecil
Jerman
11.248 km
Krauss Maffei KM 350-3000
KraussMaffeiKM 350-3000
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, gaya penjepit: 3.500 kN, diameter sekrup: 70 mm, berat injeksi: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3,500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials such as PA, PP, PE, and ABS. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Please contact us for further details.
• Shot volume: 1,097 cm³
• Processed materials: PA, PP, PE, ABS
• Cylinder temperature: up to 450 °C
• Mold opening force: 220 kN
• Moving platen force: Opening 105 kN / Closing 95 kN
• Max. opening stroke: 920 mm
• Min. mould height: 380 mm
• Max. daylight: 1,300 mm
• Dimensions of mounting plates (H x V): 1,060 x 1,095 mm
• Tie-bar spacing (H x V): 710 x 710 mm
• Ejector stroke: 250 mm
• Ejector force (forward/backward): 95 / 49 kN
Cgodpfeyyxmvox Ag Dot
• Max. mould weight: 4,950 kg
Additional equipment
• Handling system: Wittmann with the following robot travel paths (X/Y/Z): 420 / 1,200 / 2,000 mm
Iklan kecil
Jerman
11.248 km
Krauss Maffei KM 800-6100MX
KraussMaffeiKM 800-6100MX
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, gaya penjepit: 8.000 kN, diameter sekrup: 85 mm, berat injeksi: 2.452 g, en
Cgodsyyxc Djpfx Ag Dot
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 350–2700 C2+
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+
🔹 Basic Information
Manufacturer: Krauss Maffei
Model: KM 350–2700 C2+
Year of Manufacture: 2004
Type: Hydraulic injection moulding machine
Control system: MC4 (colour monitor, integrated control panel, floppy disk station)
🔧 Clamping Unit
Clamping force: 3500 kN (350 tons)
Opening force: 220 kN
Movable platen force:
- Opening: 105 kN
- Closing: 95 kN
Platen dimensions: 1060 × 1095 mm
Tie bar spacing: 710 × 710 mm
Opening stroke: 920 mm
Max. daylight: 1300 mm
Min. mould height: 380 mm
Ejector:
- Stroke: 250 mm
- Force: 95 / 48 kN
💉 Injection Unit
Screw diameter: 80 mm
Injection pressure: 1829 bar
Shot volume: 1433 cm³
Shot weight (PS): 1304 g
Screw speed: 218 / 284 rpm
Injection rate:
- 1508 cm³/s
- 108 g/s (standard)
- 141 g/s (option – increased speed)
👉 Plasticising Unit:
- Version for thermoplastics with abrasion protection
- Check valve + open nozzle
⚡ Electro-hydraulic System
Cjdpfoyv E Nvsx Ag Dsgt
Pump motor power: 75 kW
Heater power: 36 kW
Number of heating zones: 7
Dry cycle time (Euromap): 1550 cycles/h
Oil tank: 720 l
👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%).
📐 Dimensions and Weight
Weight: 16.7 t
Dimensions (L × W × H):
6.91 × 2.04 × 2.41 m
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 160–1000 CX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Mesin injection Krauss Maffei KM 160–1000 CX
🔹 Informasi utama
Produsen: Krauss Maffei
Model: KM 160–1000 CX
Tahun produksi: 2012
Jam kerja: 57.654 jam
Kategori: Mesin injection hidrolik
🔧 Unit penutup
Gaya penekanan: 1.600 kN (160 ton)
Ukuran pelat: 820 × 845 mm
Jarak antar kolom: 520 × 520 mm
Tinggi minimum cetakan: 300 mm
Maks. langkah pembukaan: 950 mm
💉 Unit injeksi
Diameter screw: 50 mm
Volume injeksi: 432 cm³
Berat injeksi: 393 g
Tekanan injeksi: 2.304 bar
⚡ Sistem elektro-hidrolik
Daya motor pompa: 37 kW
Daya elemen pemanas: 18,7 kW
👉 Dapat dipasang sistem penghemat energi (ESS) – penghematan energi nyata hingga 30–60%
📐 Dimensi & berat
Berat mesin: 9 ton
Dimensi (P × L × T): 5,54 × 2,06 × 2,18 m
Csdoyv E E Depfx Ag Dsgt
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
KraussMaffeiKM 800-5000 MC
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, wtryskarka-krauss-maffei-km-800-5000-mc
Cgjdpfsxqh I Isx Ag Dst
Iklan kecil
Wrocław
10.574 km
Mesin cetak injeksi
Krauss MaffeiKM 420-3000 CX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Krauss Maffei Injection Moulding Machine KM 420-3000 CX
Year of manufacture: 2011
Control system: MC5
Clamping unit:
Clamping force: 4200 kN
Tie bar spacing (h x v): 900 x 800 mm
Codpeydbbvofx Ag Djgt
Platen dimensions (h x v): 1400 x 1250 mm
Min. mould height: 780 mm
Max. daylight between platens: 1400 mm
Ejector stroke: 250 mm
Ejector force (forward/back): 95.4 / 48.6 kN
Max. mould weight: 6700 kg
Injection unit:
Screw diameter: 80 mm
Injection pressure: 1856 bar
Injection volume: 1608 cm³
Injection weight (PS): 1464 g
Injection flow rate: 478 cm³/s
Screw speed: 220 / 285 rpm
Nozzle contact force: 129.4 kN
Additional equipment:
2 x hydraulic nozzle control (GK)
2 x hydraulic core pulls – moving platen
1 x hydraulic core pull – fixed platen
Dosing unit colourant control
14 GK zones
Electrical and general data:
Pump motor power: 75 kW
Installed heating capacity: 36 kW
Power supply: 400 V / 50 Hz
Oil volume: 1075 l
Machine weight: 23.7 t
Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Langenfeld (Rheinland)
11.262 km
Mesin cetak injeksi
KraussMaffeiKM 160-1000 PX
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, jam operasional: 9.585 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 55 mm, jarak antara tiang: 520 mm, volume langkah: 523 cm³, tekanan injeksi: 1.904 batang, panjang total: 6.700 mm, lebar total: 1.600 mm, tinggi total: 2.300 mm, berat keseluruhan: 10.900 kg, translate_01
Cjdpfx Agoy Aktmj Degt
Iklan kecil
Cantabria
12.280 km
Krauss-Maffei KM 160/380 CX
KraussMaffeiKM 160/380 CX
Hubungi
Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2006, Mesin cetak injeksi Krauss-Maffei 160 ton, tahun pembuatan 2006, dengan konveyor. Diameter ulir 35 mm, 2 penarik inti, 6 zona hot runner. Mesin ini diserahkan setelah direkondisi oleh kami dan dapat didemonstrasikan dalam kondisi terhubung listrik di tempat kami!
Cgsdpfxoh Dh Duo Ag Det
Iklan kecil
Hungaria
11.248 km
Krauss Maffei KM 200 CX 1400 MC5
KraussMaffeiKM 200 CX 1400 MC5
Hubungi
Tahun pembuatan: 2008, jam operasional: 3.200 h, Kondisi: siap digunakan (bekas), diameter sekrup: 60 mm, el
Cgedpfxjyaizve Ag Det
Iklan kecil
Trenčianske Stankovce
10.519 km
Krauss Maffei KM 1600 - 17200 MX (2013)
KraussMaffeiKM 1600 – 17200 MX
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001
Cgodpfx Aoyh I Emsg Dot
Kami memudahkan pencarian untuk Anda: "krauss maffei km 320-2000 pa cn"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan












































































































































































































