Beli Krauss Maffei Berstorff Kmc 85/2 bekas (79.008)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, diameter sekrup: 85 mm, Complete extrusion line. Individual components can also be offered upon request. The line has been used for the production of pipes made from PP filled with chalk and barium sulfate. Components: Pedpju Rda Isfx Al Ispr - 4-Component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws replaced in 2019) - Side feeder - Complete control system for dosing units and extruder - Single oil temperature control unit - Maag melt pump - KraussMaffei extrusion head 40 to 160 mm (with various sets) - Battenfeld V250VA vacuum tank - Battenfeld K250 VA spray bath - Sica C250-4 haul-off unit - Rollepaal CCM 32/170-2 saw - Battenfeld tilting table

Tahun pembuatan: 1998, Kondisi: baik (bekas), Bagian dari lini ekstrusi langsung lama untuk pipa (yang juga masih tersedia). Mesin ini dilengkapi dengan komponen berikut: - Dosing Colortronic 4 Komponen (kontrol baru pada tahun 2017) - Berstorff KMC 85/2 (sekrup diperbarui tahun 2019) - Sidefeeder - Kontrol lengkap untuk dosing dan extruder - Tempering oli tunggal - Pompa leleh Maag Ppodpfxjx S Rimj Al Ier

Tahun pembuatan: 2016, Kondisi: seperti baru (mesin pameran),

Tahun pembuatan: 1996, Kondisi: baik (bekas), Manufacturer: KRAUSS-MAFFEI KMD-2-50-KK Description: used, fully functional Model: KMD-2-50-KK Output capacity: max. approx. 140–180 kg/h for H-PVC pipes; output may vary depending on material and product Year of manufacture: 1996 Screw diameter: 50–103 mm (conical) Screw length: 1300 mm Screw rotation speed: max. 43 m/min Drive motor: DC motor 25 kW Ppodpfx Aloh Nmt Dj Ior Cylinder heating/cooling zones: 4/3 (oil cooling) Feed section heating zone: 1 Tool heating zones: 5 Equipment: dosing unit with hopper, vacuum pump for cylinder degassing, cylinder cooling unit, screw temperature control Gearbox: Gearbox was installed at 53,000 operating hours. Refurbished screws and barrel. Note: Current operating hours: 62,590

Kondisi: bekas, Tahun pembuatan: 1999, krauss-maffei-80-220-c2-1999 Ppsdpfx Alowufwqs Ior

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, de-to-hu-it-nl-pl-lt-lv-nb Ppodpfey E Nv Eox Al Isr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, berat injeksi: 1.464 g, tinggi total: 2.500 mm, berat keseluruhan: 25.500 kg, produsen pengendali: KRAUSS MAFFEI, model controller: MC5, panjang produk (maks.): 7.300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. The robust hydraulic injection moulding machine from Germany features a clamping force of 4,200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1,464 g and an injection rate of 478 cm³/s. With a dry cycle rate of 1,200 cycles/h, it is ideally suited for high-volume production. Contact us for more information about this machine. • Electrical Data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating capacity: 36 kW • Rated power of pump motor: 75 kW • Number of barrel heating zones: 7 • Performance and Control: • Dry cycle (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine colour: grey / white / blue • Clamping Unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Force of moving platen (open/close): 124.7 / 102.4 kN • Platen dimensions: 1,270 × 1,200 mm • Mold opening stroke: 1,020 mm • Minimum mould height: 380 mm • Ejector stroke: 250 mm • Moving platen travel: 1,400 mm • Injection Unit: Ppjdpfx Aleydnp He Ior • Nozzle tip radius: 15 mm • Nozzle aperture diameter: 6 mm • Injection pressure: 1,856 bar • Injection volume: 1,608 cm³ • Injection capacity: 478 cm³/s

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Pjdpfxsy Hqwyj Al Ijpr Clamping unit: Clamping force [kN]: 13,000 Tie bar distance (H x V) [mm]: 1,570 x 1,270 Platen dimensions (H x V) [mm]: 2,210 x 1,910 Min./Max. mould height [mm]: 700–1,400 Max. daylight opening [mm]: 3,050 Max. ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5,195 Shot weight PS [g]: 4,728 Injection pressure [bar]: 2,296 Max. injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Pump motor rated power [kW]: 132 Screw drive motor rated power [kW]: 145 Heater capacity [kW]: 71 Dimensions and weight: Net weight incl. control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Cores: 3 hydraulic circuits (2 on the moving platen, 1 on the fixed platen) Pneumatics: 2 air valves (blow-off) + 1 valve for hot runner shut-off nozzle Hydraulic accumulator Cooling: 20 rotameter cooling circuits (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 70.936 h, gaya penjepit: 4.200 kN, diameter sekrup: 80 mm, This hydraulic injection moulding machine Krauss Maffei 420 - 4300 CX was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine is equipped with an injection unit featuring a screw diameter of 80 mm and an injection pressure of 2205 bar. Please enquire about the possibility of purchasing this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm Pjdpsyhby Hjfx Al Iepr • Platen dimensions (H x V): 1200 x 1200 mm • Minimum mould installation height: 380 mm • Opening stroke: 1020 mm • Daylight (distance between platens): 1400 mm • Max. mould weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on the moving side (AS) + 2 on the fixed side (DS) • Shut-off nozzle: 2-stage hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Shot volume: 1810 ccm • Shot weight (PS): 1647 g • Injection rate (PS): 498 g/s • Plasticising throughput: 106 g/s • Screw L/D ratio: 22.5 • Nozzle radius: 12 mm • Armoured injection unit: Yes Additional equipment • KM linear robot, year of manufacture: 2021 • Hot runner control, 12 zones • Tool sensors: Priamus (p=2 / t=0)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 44.678 h, gaya penjepit: 2.500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2,500 kN and a maximum mould weight of 3,430 kg. The machine is equipped with an LRX 150 linear robot for enhanced automation. Consider the opportunity to purchase this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Dimensions of clamping plate: 995 x 1050 mm • Minimum mould installation height: 330 mm • Distance between platen plates: 1,150 mm • Max. mould weight: 3,430 kg total (fixed side: 1,715 kg / moving side: 2,286 kg) • Core pull control: 4 units (2 x fixed platen / 2 x moving platen) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (Code 1000): • Screw diameter: 55 mm • Injection pressure: 1,904 bar • Shot volume: 523 ccm Ppjdsyhbq Ejpfx Al Isr • Shot weight (PS): 476 g • Injection rate (PS): 404 g/s • Armoured unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: LRX 150 linear robot with B/C axis combination (KM LRX 150 linear robot included) • Hot runner control: 12 zones • Cooling: 4 x HB 100

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 4.517 h, gaya penjepit: 16.000 kN, diameter sekrup: 125 mm, berat injeksi: 7.450 g, This 3-axis hydraulic injection moulding machine, Krauss Maffei 1600-17200MC, was manufactured in 2001. It offers a clamping force of 16,000 kN and a screw diameter of 125 mm. The maximum shot weight is 7,450 g, and the platen size is 2,600 x 2,110 mm. If you are looking for a high-quality injection moulding machine, consider the Krauss Maffei 1600-17200MC, which we are offering for sale. Contact us for further details. • Injection unit: 17200 • Tie bar spacing (h × v): 1,600 × 1,250 mm • Platen size (h × v): 2,600 × 2,110 mm • Daylight opening (x × y): 1,800 × 1,400 mm • Maximum mould opening stroke: 2,500 mm • Mould installation height (min–max): 900–1,600 mm • Opening width: 3,400 mm • Mould opening force: 1,108 kN Podpfeyyyr Tjx Al Iopr • Movable platen force: Open 177 kN / Close 153 kN • Ejector stroke: 300 mm • Ejector force (forward/reverse): 415 / 177 kN • Operating voltage: 400 V / 50 Hz • Motor current: 446 A • Heating current: 164 A • Total pump operating hours: 73,761 h Additional equipment • Spare cylinder / screw set (1x) • Internal cooling system • Core pull unit (2x)

Kondisi: bekas, Krauss Maffei SE502 MC4 pengendali alur – dilepas dari KM 18 C3 - dilepas dari mesin yang sedang beroperasi Podpfxsrr Eh Ae Al Ijpr - berfungsi penuh Pabrikan: Krauss Maffei Tipe: SE502 No. suku cadang: 5 Kondisi: bekas

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 29.000 h, gaya penjepit: 50 kN, volume langkah: 59 cm³, tekanan injeksi: 2.500 batang, berat keseluruhan: 3.700 kg, diameter konveyor sekrup: 25 mm, Freight basis: ex works Delivery time: by arrangement Terms of payment: 100% prior to machine collection, strictly net Manufacturer: Krauss Maffei Model: KM50-180AX Ppsdpfx Ajppigdsl Ijr Condition: from ongoing production Operating hours: approx. 26,000 CLAMPING UNIT: Clamping force: 50 t Opening stroke: 300 mm Min. mould installation height: 150 mm Max. mould installation height: 470 mm Tie bar distance (h x v): 410 x 360 mm Platen dimensions (h x v): 510 x 460 mm Centering diameter (nozzle/ejector plate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Shot weight in polystyrene: 54 g Stroke volume: 59 cm³ Injection pressure: 2,500 bar CONTROL: MC5 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 x (hydraulic core pull unit) Air valves: 2 Hot runner zones: 6 Robot interface: Euromap 67 Other equipment: Quality monitoring package GENERAL DATA: Installed heating capacity: 8.1 kW Pump drive power: not applicable Total connected load: motor + heating Total weight: 3,700 kg Overall dimensions (L x W x H): 4.4 x 1.6 x 1.9 m

Kondisi: bekas, Krauss Maffei IPC 5-133 untuk kontrol MC4 - dilepaskan dari KM, belum diuji. Produsen: Krauss Maffei No. suku cadang: 5 Kondisi: bekas Psdpjrr Egwjfx Al Ijpr

Kondisi: bekas, Tahun pembuatan: 2008, jam operasional: 37.200 h, gaya penjepit: 160 kN, volume langkah: 251 cm³, tekanan injeksi: 2.500 batang, berat keseluruhan: 8.200 kg, diameter konveyor sekrup: 40 mm, Basis pengiriman: FCA Pegnitz Waktu pengiriman: sesuai kesepakatan Ppedpfx Aowd Udlsl Isr Syarat pembayaran: 100% pembayaran sebelum pengambilan mesin, bersih tanpa potongan

Kondisi: bekas, Tahun pembuatan: 2004, Technical Details: Screw diameter: 105 mm Shot weight in polystyrene: 4727 g/PS Clamping force: 2300 kN Platen size: 2830 x 2400 mm Opening stroke: 3700 mm Mould installation height: 1100-1800 mm Injection volume: 5195 cc Max. injection pressure: 2296 bar Dimensions: 14.2 x 4.15 x 2.84 m Ppodpfstrbcbox Al Isr Total weight: 143 t Tie bar spacing: 2000 x 1600 mm Robot system, core pulls, hot runner controller -    The machine is in very good condition. -    Additionally, complete cutting units available. -    Includes a conveyor belt and robot systems (model year 2012).

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, jam operasional: 57.752 h, gaya penjepit: 13.000 kN, diameter sekrup: 105 mm, berat keseluruhan: 83.000 kg, Hydraulic injection moulding machine from 2002. This Krauss Maffei 1300-12000 MC features a screw diameter of 105 mm and a maximum processing temperature of 450°C. It is equipped with a hydraulic-mechanical two-platen clamping system and a robust motor current of 261 A. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei 1300-12000 MC, which we are offering for sale. Contact us for further details. • International specification: 12000 MC / 1300 • Operating hours: 57,752 h • Mains voltage: 400 V, 3-phase, 50 Hz (400/230 V European standard) • Motor current: 261 A • Heating current: 239 A • Total motor current: 245 A • Motor circuit breaker: 315 A • Heater circuit breaker: 250 A • Main switch: 6-pole, heating and power separately switched • Sockets: Service socket Schuko 10 A; 3x Schuko 16 A; 2x CEE 16 A; 2x CEE 32 A • Oil-cooled pump motor: IP54 • Housing cooling fan Control System and HMI • MC4 32-bit microprocessor control • TFT colour display • 3.5-inch floppy disk drive Clamping Unit • Hydraulic-mechanical two-platen clamping system • 4 pressure pads integrated into the moving platen • Hydraulic central ejector • Hydraulic core pull control • Hydraulic safety gate on operating side • Minimum mould height: 700 mm • Maximum mould height: 1400 mm • Maximum opening stroke: 2250 mm • Maximum daylight opening: 2950 mm Injection and Plasticising • PV-controlled injection unit • Thermoplastic plasticising unit, wear-resistant design • Screw diameter: 105 mm • Integrated check valve • Open nozzle design • Nozzle radius: 15 mm; nozzle bore diameter: 4 mm • Hydraulic screw drive with constant motor • Parallel plasticising possible • Plasticising unit: SP12000 • Maximum processing temperature: 450°C • Injection compression control adjustable via display • Injection stroke control • Hold pressure control • Injection speed control Hydraulics, Lubrication, Cooling Pedpfx Aeyx Ez Rjl Ijpr • Regenerative pump control system • Internal oil filtration system • Oil monitoring system • Oil cooler for water supply: max. 31°C • Cooling water pressure: 4-6 bar Temperature Control • 8 temperature control zones for hot runners • Adaptive temperature controllers • Maximum controller power: 2 kW • Controller supply: 230 V Monitoring and Software • Quality monitoring package • Process monitoring system • Tolerance band monitoring • Cycle analysis display • Cycle data saving for up to 20,000 cycles • Event log • Alarm history • Graphical process curves • Trend graphics for 12 parameters Interfaces and Connectivity • RS232 interface • Ethernet interface TCP/IP • Euromap 12 interface • Euromap 63 / SPI software support • Interface for external temperature measuring device 20 mA • Central computer interface • PDA interface with 5 contacts • Volt-free contact for dosing unit

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), diameter sekrup: 40 mm, Krauss Maffei 150-520 C2 ini diproduksi pada tahun 2002. Mesin ini memiliki diameter sekrup 40 mm dan dilengkapi dengan robot Sepro serta konveyor penyimpanan dari tahun 2014. Mesin dalam kondisi siap pakai, dengan 50.327 jam operasi pompa dan 36.908 jam operasi otomatis. Manfaatkan kesempatan untuk membeli mesin cetak injeksi hidrolik Krauss Maffei 150-520 C2 ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Ppjdox D Hxljpfx Al Ier

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: - Opening: 105 kN - Closing: 95 kN Pjdpfxjyv E Nvs Al Iepr Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and a state-of-the-art MC6 control system. Plasticising Unit Complete plasticising unit dedicated to thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / return): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw speed: 285 rpm Plasticising capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical and Hydraulic Equipment Ppjdjyugkwjpfx Al Ior Rated pump motor power: 75 kW Installed heater capacity: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Dimensions and Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (length × width × height): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS Energy Saving System (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed according to the current demand during the production cycle. Key Benefits - Reduction of electricity consumption by up to 30% - Servo drive technology for hydraulic pump - World-class quality and proven industrial technology - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended lifespan of hydraulic components - Can be installed on existing hydraulic injection moulding machines

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Injection Moulding Machine KRAUSS MAFFEI KM 1100-12000 MX Basic Specifications Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: colour screen integrated with the operator console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticising unit for thermoplastics processing with abrasion protection. Clamping Unit Clamping force: 11,000 kN Mould opening force: 770 kN Platen dimensions (horizontal × vertical): 2210 × 1910 mm Tie bar spacing (horizontal × vertical): 1550 × 1250 mm Mould opening stroke: 2000 mm Minimum mould height: 600 mm Maximum mould height: 1200 mm Platen stroke: 2600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1758 bar Injection volume: 6786 cm³ Shot weight (PS): 6175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1118 cm³/s Injection rate (with accumulator): 1696 cm³/s Electrical and Hydraulic Equipment Podpfsyugfzsx Al Iopr Rated pump motor power: 132 kW Installed heating power: 82 kW Number of barrel heating zones: 7 Dry cycle time (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2440 l Machine Dimensions and Weight Net weight (incl. control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, adjusting the motor speed to current demand throughout the production cycle. Key Benefits - Reduction of electricity consumption by up to 30% - Hydraulic pump servo drive technology - Globally recognized, proven technology applied in plastics processing industry - Decreased energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection moulding machines The ESS system enables significant reduction of operating costs while maintaining full production performance parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Injection Moulding Machine KRAUSS MAFFEI KM 4000-24500 MC with optional ESS Energy Saving System Basic Information Manufacturer: KraussMaffei Model: KM 4000-24500 MC Year of manufacture: 2003 Control system: MC4 Software languages: German, English, Swedish Clamping Unit Clamping force: 40,000 kN Mould opening force: 2,525 kN Platen dimensions: 3,315 × 2,920 mm Tie bar spacing: 2,240 × 1,800 mm Mould opening stroke: 3,100 mm Minimum mould height: 1,100 mm Maximum mould height: 2,000 mm Maximum daylight: 4,200 mm Ejector stroke: 350 mm Ejector force: 772 / 368 kN Injection Unit (HPS-AT) Screw diameter: 150 mm L/D ratio: 23 Maximum injection pressure: 1,843 bar Injection volume: 13,254 cm³ Shot weight (PS): 12,061 g Injection rate: 1,431 cm³/s Plasticising rate: 266 g/s Electrical-Hydraulic System Hydraulic pump motor power: 200 kW Heater power: 159 kW Number of cylinder heating zones: 7 Dry cycle time (EUROMAP 6): 270 cycles/h Hydraulic oil tank capacity: 2,700 l Machine Dimensions and Weight Machine dimensions (L × W × H): 17.3 × 4.9 × 3.74 m Machine weight: 247 t Maximum mould weight: 90,000 kg Optional ESS Energy Saving System (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic plastic injection moulding machines. Podpfx Aeyuf N Eol Iepr The system controls the operation of the hydraulic pump motor by using a frequency inverter that adjusts the motor speed to the machine's actual demand during the production cycle. As a result, electrical energy is consumed only when truly needed. Key Benefits of the ESS System • Reduction of electrical energy consumption by up to 30% • Hydraulic pump servo drive technology • World-class and proven technology used in plastics processing industry • Reduced energy consumption during machine idle time • Lower hydraulic system heat generation • Extended service life of the motor and hydraulic components • Retrofit possible for existing hydraulic injection moulding machines without modification to the machine's structure The ESS system offers a state-of-the-art solution, enabling a significant reduction in the operating costs of the injection moulding machine while maintaining full production parameters.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, en001 Ppsdpfx Ajyrrwksl Ijr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Year of manufacture: 2011, Arm reach: 1717 mm, Ppodpfjtxymmox Al Ior Weight: 20 kg, Controller: DX100

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, KRAUSS MAFFEI KM 4000-24500 MC Injection Molding Machine _____ Basic Data • Year of Manufacture: 2003 • Control System: MC4 • Software Languages: Swedish, German, English _____ Clamping Unit • Clamping Force: 40,000 kN • Mold Opening Force: 2,525 kN • Platen Dimensions (horizontal × vertical): 3,315 × 2,920 mm • Tie Bar Spacing (horizontal × vertical): 2,240 × 1,800 mm • Mold Opening Stroke: 3,100 mm • Min./Max. Mold Height: 1,100 – 2,000 mm • Max. Daylight: 4,200 mm • Ejector Stroke: 350 mm • Ejector Force (forward / return): 772 / 368 kN _____ Injection Unit (HPS-AT) • Screw Diameter: 150 mm • L/D Ratio: 23 • Max. Injection Pressure: 1,843 bar • Injection Volume: 13,254 cm³ • Shot Weight (PS): 12,061 g • Injection Rate: 1,431 cm³/s • Plasticizing Rate: 266 g/s _____ Electro-Hydraulic System • Hydraulic Pump Motor Power: 200 kW • Installed Heater Power: 159 kW • Number of Cylinder Heating Zones: 7 • Dry Cycle Time (Euromap 6): 270 cycles/h Psdpjyifg Dofx Al Iopr • Hydraulic Oil Tank Capacity: 2,700 l _____ Machine Dimensions and Weight • Machine Dimensions (L × W × H): 17.3 × 4.9 × 3.74 m • Machine Weight: 247 t • Max. Mold Weight: 90,000 kg