Beli Kraussmaffei Km250-1400Cx bekas (235)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, gaya penjepit: 2.500 kN, Perlengkapan: dokumentasi / manual, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar spacing: 630 x 630 mm Shot weight: 471 g (PS) Shot volume: 518 cm³ Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 kN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Max. opening stroke: 630 mm 5. Mold height (min./max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Max. injection speed: 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m Dksdsxqhfyopfx Aaqel 2. Machine weight: approx. 14.0 – 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Machine equipment:_ 1. BluePower servo pump drive system (energy-efficient servo hydraulics) 2. Hydraulic core pull 1× on operator side + pressure relief system 3. 8-circuit water manifold with solenoid valve shut-off 4. 4-zone hot runner control (ZE 88.5404) 5. MC6 control with 19″ touch TFT screen 6. PV control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. Energy-saving BluePower servo drive system LRX 150 linear robot (payload &lt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, jam operasional: 54.872 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 2.500 kN, diameter sekrup: 55 mm, volume langkah: 570 cm³, tekanan injeksi: 2.387 batang, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, berat keseluruhan: 15.000 kg, de001 Dodsyv Elwspfx Aaqskl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Djdpfx Aey Dqiwsaqokl Metering volume: 1077 ccm Clamping unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen size: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Controller with 16 hot runner zones Injection unit hardened – bimetallic Energy-efficient machine – features a system with 3 variable output hydraulic pumps Parallel movements Proportional valve on the injection unit – for precise injection Additional oil cleaning pump Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by servo motors (electric): X, Y, Z, B; axis C Touch panel controller Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor at additional cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50x2.20x2.30 m All machines offered are put into operation by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Dkodpfxey Dqiqo Aaqel Shot weight: 617 g Injection pressure: 2,007 bar Metering volume: 679 cc Clamping unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 interface Robot interface Air valve with vacuum monitoring x 1 Hydraulic core pull units x 3 Air core pull units x 3 Hot runner control x 10 Injection unit hardened – bimetallic Energy-efficient machine – equipped with a system with 3 variable-capacity hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Robot Krauss Maffei LRX Easy Control 100 Year of manufacture: 2019 4-axis robot: 3 axes driven by servomotors (electric); C axis – pneumatic Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt subject to surcharge Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, jam operasional: 65.850 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61013689, gaya penjepit: 2.500 kN, diameter sekrup: 50 mm, jarak antara tiang: 630 mm, volume langkah: 432 cm³, tekanan injeksi: 2.304 batang, berat injeksi: 393 g, Perlengkapan: dokumentasi / manual, Here we offer, as a specialist trader of injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines on an ongoing basis. Year of manufacture: 2010 We have been a wholesaler of used injection moulding machines for over 25 years. Current notice – Tax benefit for used machines: From 01.07.2025, used machines can also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower price compared to a new machine, you can claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 para. 2 EStG-E) Currently in stock, tested at our warehouse in Hanover: Manufacturer: Krauss Maffei Model: KM 250 1000 CX Control system: MC5 Year of manufacture: 2010 Operating hours: 65,850 h Machine number: 61013689 Processed materials: PE and PP thermoplastics Equipment / Extras: - 2 x core pull (movable core pull, fixed core pull) - Pneumatic valve 1 on moving platen - Accumulator for increased injection capacity - Fast SK demounting CX Midrange - Ejection of cold sprue - Start handling during mould movement - Start-up control - Cycle time analysis - External USB keyboard - Graphic analysis and maintenance notifications - Electronic coding of injection unit - Pneumatic valve at fixed platen for air blast - 12 temperature control zones - Volt-free BDE contact - Process monitoring - Cycle memory - Trend graphics – target vs. actual - PV control - Active backpressure regulation - From first ownership – origin Germany - Maintained regularly by manufacturer and previous owner Clamping unit: Clamping force: 2500 kN / 250 tonnes Tie bar spacing: 630 x 630 mm Platen size: 995 x 1050 mm Maximum daylight: 820 mm Minimum mould height: 330 mm Maximum opening stroke: 1150 mm Ejector stroke: 200 mm Ejector force: max. 57 kN / return 26.3 kN Injection unit: Screw diameter: 50 mm Injection volume: 432 ccm Shot weight: 393 g/PS Injection pressure: 2304 bar Electrics: Pump: 45 kW Heater: 5 zones, 18.7 kW Weight: 13,900 kg Dimensions: 5.7 x 2.3 x 2.3 m Complete documentation (manual, software) Available ex stock Hanover, Germany, or delivered free to your location for an additional freight charge – available immediately. The machine is offered fully tested and functional. The machine is our exclusive property. The machine is available immediately at our Hanover warehouse, is fully functional, and can be inspected under power. About our company and equipment offered: - We only sell machines owned by us, procured directly from ongoing production, from our Hanover warehouse - All offered machines are inspected and tested before disassembly - We DO NOT sell insolvency assets – we are NOT brokers or agents dealing with third-party machines - All offered machines come from successful businesses where maintenance and care are a matter of course - All offered machines are available for inspection at our warehouse Dedpjxqhuuefx Aaqekl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, jam operasional: 78.454 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 60 mm, jarak antara tiang: 630 mm, volume langkah: 678 cm³, tekanan injeksi: 2.007 batang, tinggi pemasangan: 330 mm, panjang total: 6.500 mm, lebar total: 2.200 mm, tinggi total: 2.300 mm, d85a8603 Dsdpfx Aaoyxmz Ejqekl

Tahun pembuatan: 2002, Kondisi: siap digunakan (bekas), Clamping force: 2,500 kN, clear tie bar spacing: 630 mm/630 mm, opening stroke: 1,150 mm, minimum mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2,000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control system: MC4. Machine dimensions: 5,700 mm / 2,200 mm / 2,300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8x hot runner controllers, 4x core pulls, blow-out unit, accumulator, hydraulic tie bar withdrawal unit, energy-saving circuit, ALS interface, 20mA interface, and color dosing unit interface. On-site inspection possible, documentation available. Dkedpjuiykdefx Aaqol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 8.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61029386, gaya penjepit: 2.000 kN, diameter sekrup: 70 mm, Perlengkapan: dokumentasi / manual, Dijual mesin injection molding KraussMaffei 200/1400 CX POL BMC dalam kondisi sangat baik. Jam operasi sedikit, diproduksi tahun 2017, mulai digunakan tahun 2018. Kontrol MC6. Untuk detail lebih lanjut, silakan hubungi kami melalui email! Terima kasih! Dkodpfx Aswz Iv Aeaqol

Kondisi: baru, Tahun pembuatan: 2025, Injection Moulding Machine – Krauss Maffei KM 300-1400 CX Year of manufacture: 2025 Fully hydraulic clamping unit. MC 6 control system based on an industrial computer operating in real-time Ethernet technology, equipped with an integrated 21.5" operator panel with a colour touch screen. Plasticising Unit Complete plasticising unit for thermoplastics, screw diameter 60 mm, with non-return valve and open nozzle Nozzle radius: 15 mm Nozzle opening: 6 mm Technical specifications (standard version) Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H x V): 995 x 1050 mm Tie bar spacing (H x V): 630 x 630 mm Opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Ejector stroke: 200 mm Dkjdpfxoxdd Sps Aaqjl Ejector force (forward/back): 58 / 28 kN Injection unit Screw diameter: 60 mm L/D ratio: 20.8 Injection pressure: 2006 bar Injection volume: 679 cm³ Shot weight (PS): 618 g Injection speed: 110 mm/s Injection rate (standard): 311 cm³/s Screw speed (standard): 260 rpm Electro-hydraulic system Pump motor power: 45 kW Installed heater capacity: 22.4 kW Dry cycle time according to Euromap 6: 2.7 s Oil tank capacity: 720 l Linear robot – Krauss-Maffei LRX 150 Payload < 15 kg (gripper + drives + parts) Part deposit on operator-opposite side Axes: X axis (from mould): 900 mm, servomotor Y axis (vertical, with motor brake): 750/750 mm, servomotor, telescopic Z axis (transverse): — Dimensions and weight Net weight (with control cabinet): 13.2 t Machine dimensions (L x W x H): 6.16 x 2.17 x 2.26 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Injection Moulding Machine Krauss Maffei KM 250-1900 C1 Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: fully hydraulic Control system: MC4 with colour monitor, control panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1050 mm Tie bar spacing: 630 x 630 mm Mould opening stroke: 820 mm Mould installation height: 330 mm Max opening width: 1150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1778 bar Shot volume: 1047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Output (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Cylinder heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1400 1/h Oil tank: 720 l 🔹 Dimensions and Weight Dkedpoxak Ucsfx Aaqel Net weight (including control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Max. mould opening force: 160 kN Movable platen traverse force – opening: 86 kN Movable platen traverse force – closing: 68 kN Mould platen dimensions (H × L): 995 × 1,050 mm Tie bar spacing (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight between platens: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/back): 58 / 28 kN Injection unit: Dodpfx Asw A N Hfsaqekl Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight (PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Max. plasticising rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: Oil tank Anti-vibration pads 3 × core pullers 8 × hot runner control zones 2 × air valves Robot interface compliant with Euromap 67 Additional information: Machine located in Poland Ready for collection Possibility to arrange loading, transport, installation, and commissioning

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.961 kN, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Gaya penguncian: 200 t Jarak antar tie-bar: 560 x 560 mm Diameter screw (komponen pertama): 60 mm Diameter screw (komponen kedua): 35 mm Dksdey Exdlepfx Aaqel Berat injeksi (komponen pertama): 566 g Berat injeksi (komponen kedua): 178 g PERLENGKAPAN Sistem dua komponen Sistem Kraussmaffei Multinject Catatan: Jika Anda membeli beberapa item dari lokasi yang sama (lihat penawaran di bawah), biaya pembongkaran dan pemuatan yang lebih rendah akan diberlakukan.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, 1 Dodpfoy Dqiksx Aaqokl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 35-55 CX / Machine in very good technical condition Year of manufacture: 2008 Injection unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 cc Clamping unit: Clamping force: 35 t Tie bar spacing: 320x320 mm Platen size: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC V - touchscreen Additional equipment: Machine in very good technical condition EUROMAP 67 Robot interface Air valve x 2 Hot runner control x 6 Hardened injection unit - bimetallic The machine has been regularly serviced by authorized Krauss Maffei service in Germany The screw diameter can be changed to 20 mm or 22 mm Dimensions: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Dkodpoy Dp Husfx Aaqsl Drive: Pump/Motor: 11 kW Heating capacity: 3.78 kW Total connected load: 14.78 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of manufacture: 2018 Injection Unit: Screw diameter: 80 mm Shot weight: 1464 g Injection pressure: 1855 bar Dosage volume: 1608 cc Clamping Unit: Clamping force: 400 t Tie bar spacing: 920x830 mm Platen size: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. 19,000 h in automatic mode Euromap 67 Robot interface Min./max. mould installation height: 400/900 mm Air valve x 4 Hydraulic core pull x 4 Control with hot runner zones x 36 Self-sealing nozzle x 10 Injection unit hardened – bimetallic Proportional valve on the injection unit – precise injection Function for automatic extraction of the top tie bar Machine has been regularly serviced by authorized Krauss Maffei service Robot Krauss Maffei LRX 250 Year of manufacture: 2018 High-speed robot 5-axis robot: 5 axes driven by servo motors (electric): X, Y (telescopic), Z, B (rotation), and C Vacuum Touch control panel Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor at additional cost Dimensions: Weight: 22,650 kg Length/Width/Height: 7.58x2.73x2.32 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request Dksdpsy Dqi Rjfx Aaqol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Krauss Maffei KM 80-180 CX with Sepro Industrial Robot 55 Sprue Picker Year of manufacture: 2005 Injection Unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Metering volume: 85 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC V - touchscreen Additional Equipment: Dsdpfx Asy Dp Ifjaqskl Euromap 67 Robot interface Control with air valve One hydraulic core pull Hardened, bimetallic injection unit Sepro Industrial Robot 55 sprue picker Year of manufacture: 2018 It is possible to purchase a Moretto raw material feeding system at an additional cost. The set includes: - Volumetric screw dosing unit with hopper - Conveyor with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pump/Motor: 15 kW Heating capacity: 8.12 kW Total connected load: 23.12 kW All machines offered are started up and tested by our service technicians prior to sale. A video of the technical test of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: bekas, Motor, 1FK7060-5AF71-1DU5-Z, 4 pieces available. Motor, 1FK7100-5AF71-1AG0, 2 pieces available. Motor, 1FW3204-1GN72-5CK0-Z, 1 piece available. Motor, 1FW3204-1GY72-5CK4-Z, 1 piece available. Motor, 1FW3204-7GN01-4GY7-Z, 2 pieces available. Display, 2 pieces available. Siemens line filter for 120 kW Act, 6SL3000-0BE31-2AA0, 1 piece available. Siemens Simodrive drive unit, 6SN1111-0AA00-1FA0, 1 piece available. Siemens single motor module, 6SL3126-1TE32-0AA0, 3 pieces available. Siemens single motor module, 6SL3126-1TE31-3AA3, 1 piece available. Siemens double motor module, 6SL3126-2TE21-0AA0, 2 pieces available. Siemens Active Line Module, 6SL3136-7TE31-2AA1, 2 pieces available. Siemens SINAMICS sensor module SMC20, 6SL3055-0AA00-5BA1, 6 pieces available. Siemens motor module, 6SL-3126-1TE31-3AA0, 1 piece available. Dsdpfxjrbzx Rs Aaqokl Siemens motor module, 6SL-3126-1TE32-0AA4, 1 piece available. Siemens motor module, 6SL-3126-1TE21-8AA0, 2 pieces available. Siemens control unit, 6SL-3040-0MA00-0AA1, 2 pieces available. Siemens Simodrive drive unit, 6SN1111-0AA00-1FA0, 1 piece available. Motherboard

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 98.806 h, gaya penjepit: 40.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 255.000 kg, de-EN-20240617-km4000-sales-ad Dedsyt Hy Nepfx Aaqjkl

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 99.161 h, gaya penjepit: 32.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 230.000 kg, sales-description-kraussmaffei-injection-molding-machine Djdpfeyt H Dhjx Aaqskl

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 101.215 h, nomor mesin/kendaraan: 23J01415, gaya penjepit: 23.000 kN, berat injeksi: 6.100 g, panjang total: 4.500 mm, tinggi total: 3.800 mm, berat keseluruhan: 205.000 kg, Two high-performance KraussMaffei injection molding machines are being offered for sale. The machines are KM 2300-14700 MC models, specifically engineered for high-volume production of large plastic components. Each unit features a clamping force of 23,000 kN, a screw diameter of 105 mm, and a maximum shot weight of 6,100 g. This makes them especially suited for manufacturing oversized parts and applications requiring substantial material throughput. Both systems come fully equipped with a comprehensive range of peripherals, including a KUKA KRC4 robot interface, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also part of the package. Machine details: Machine 1 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) - Year: 1998 - Operating hours: approx. 101,215 h Machine 2 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 9) - Year: 1997 Dedpfoyt Hidox Aaqjkl - Operating hours: approx. 99,030 h Shared technical specifications: - Clamping force: 23,000 kN - Screw diameter: 105 mm - Maximum shot weight: 6,100 g - Machine weight: approx. 205,000 kg - Dimensions: - Depth: approx. 4,500 mm - Height: approx. 3,800 mm Both machines have been in operation in an industrial production environment and offer a reliable, proven solution for plastics processing companies looking to expand their large-part injection molding capabilities.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force 1600 kN Dkodpsy Nlb Sefx Aaqjl Max. tool opening force 87 kN Moving platen opening force 45 kN Moving platen closing force 38 kN Clamping platen (H x V) 820 x 845 mm Clear distance between tie bars (H x V) 520 x 520 mm Mold opening stroke 650 mm Min. mold installation height 300 mm Maximum opening stroke 950 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection Unit: Screw diameter 50 mm L/D ratio 20 Injection pressure 1892 bar Shot volume 393 ccm Shot weight (PS) 358 g Injection flow rate 177 ccm/s Screw speed 265 rpm Plasticizing rate 36.2 g/s Nozzle contact force 50 kN Electrohydraulic Equipment: Rated power of pump motor 22 kW Installed heating capacity 16 kW Number of heating zones (barrel) 5 Oil capacity 489 liters Dimensions and Weights: Floor space approx. 5.50 x 2.00 x 2.20 m Total weight 8200 kg Max. mold weight 1862 kg Accessories: - Vibration-damping elements - BluePower servo pump drive Additional Equipment: - 1 x air valve - 8 x hot runner controllers - 2 x core pulls on moving platen - 2 x core pulls on fixed platen - Robot interface to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 57.830 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 70 mm, volume langkah: 1.047 cm³, 01 Dkodpfoy Nk Taox Aaqsl

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), de Dkedegbpnmspfx Aaqol

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.900 h, gaya penjepit: 1.600 kN, diameter sekrup: 105 mm, jarak antara tiang: 18.701.420 mm, volume langkah: 4.546 cm³, panjang total: 13 mm, lebar total: 4 mm, tinggi total: 3 mm, berat keseluruhan: 83 kg, tekanan: 1.778 batang, 8 saluran panas 16 sekuensial pneumatik 2 peniup SERVO POMPA Dksdpey I Apqjfx Aaqol PC MC6 BERAT 83T JARAK ANTAR PLAT 3400MM

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 61.300 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, jarak antara tiang: 470 mm, tekanan: 2.429 batang, Here, as a specialized dealer in injection moulding machines, we offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of injection moulding machines for over 25 years. ++++From pharmaceutical cleanroom production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International designation: 380 EX / 120 Machine number: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical Data - Clamping Unit Clamping force: 1,200 kN Tie bar distance h x v: 470 x 470 mm Platen size h x v: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. daylight: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Moveable platen centering diameter: 160 mm Fixed platen centering diameter: 125 mm Mould weight: 1,485 kg Technical Data - Injection Unit Screw diameter: 35 mm Shot volume: 156 cc Injection pressure: 2,429 bar Screw L/D ratio: 23 l/d Screw speed: 289 rpm Plasticizing rate: 27 g/s (PS) Free-shot rate: 477 g/s (PS) Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6m x 1.7m x 2.19m Total weight: 9,700 kg Equipment Screen texts: German Screen texts: English +++Extras++++ Automation: Handling device / extraction robot included - Handling: LR 100-2300 Conveying technology: Roller conveyor included CE marking: available Full maintenance and acceptance history Complete last test report Incl. conveyor belt Incl. safety cage Machine equipped with water battery Machine without material hopper Leveling elements Interface: EUROMAP 12 Electrical Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty valid until first commissioning Djdpoy D Adtsfx Aaqekl Loading/Shipping Free loaded onto buyer's truck or free delivery against freight reimbursement Available ex stock Hanover / Germany