Beli Kraussmaffei Km350-2000Cx bekas (230)

Kondisi: bekas, Tahun pembuatan: 2005, Injection moulding machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: Opening: 105 kN Closing: 95 kN Mounting platen (H x V): 1,060 x 1,095 mm Clear distance between tie bars (H x V): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Gbsdpjxu Uvajfx Alksl Max daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/back: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heater control zones: 6 Dry cycle rate: 1,550 1/h Oil fill: 720 ltr. Dimensions and weights: Net weight with control cabinet: approx. 16,0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max mould weight: 4,780 kg Injection unit: Shot volume: 1,900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection flow: 527 cm³/s Screw speed standard / optional: rpm 285/349 Screw drive motor standard or stage 1: 95 kW Screw drive motor optional or stage 2: 117 kW Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT color display and 3.5 inch floppy drive for data backup Plasticising: 1 complete thermoplastic plasticising unit in wear-resistant design, screw diameter 70 mm with non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle orifice: 6.00 mm 12526ä

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, de-hu-1 Gsdpjy A Hl Esfx Alkobl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 ccm Clamping unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen size: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Controller with 16 hot runner zones Injection unit hardened – bimetallic Gbsdpfxey Dqiws Alksl Energy-efficient machine – features a system with 3 variable output hydraulic pumps Parallel movements Proportional valve on the injection unit – for precise injection Additional oil cleaning pump Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by servo motors (electric): X, Y, Z, B; axis C Touch panel controller Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor at additional cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50x2.20x2.30 m All machines offered are put into operation by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 6.200 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.200 kN, diameter sekrup: 75 mm, Krauss-Maffei KM 420-2000 CX Injection molding machine from Krauss-Maffei with 420 tons clamping force. Only 6,000 automatic operating hours. Year of manufacture: 2008. MC5 control unit. Screw diameter: 75 mm. Extras: 8 hot runner zones, 2 core pulls on the fixed platen, 2 core pulls on the moving platen, 1 pneumatic valve on the moving platen. The machine is delivered RE-Conditioned by the technical expert team of UK Transitus. Optionally, we can offer on-site commissioning at the customer's facilities, ensuring reliable operation upon installation completion. Technical Details SCREW DIAMETER: 75 mm INJECTION PRESSURE: 1635 BAR Gbjdpfjwq D Efsx Alksl INJECTION VOLUME: 1237 cm³ SHOT WEIGHT: 1126 g MAX. PLATEN DISTANCE: 1400 mm MIN. MOLD HEIGHT: 380 mm OPENING STROKE: 1020 mm TIE BAR DISTANCE: 900 x 800 mm PLATEN DIMENSIONS: 1270 x 1230 mm SCREW DIAMETER: 75 mm CLAMPING FORCE: 4200 kN YEAR OF MANUFACTURE: 2008 OPERATING HOURS: 6,282

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), 2079916 Gbedpsxx Uf Ajfx Alkol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Krauss Maffei Injection Moulding Machine KM 350-2700 C2+ Year of manufacture – 2004 System: Fully hydraulic Control: MC4, colour monitor, integrated control panel, built-in disk station 2. Plasticising unit Complete plasticising unit for thermoplastics Version with abrasion protection Screw diameter: 80 mm Non-return valve Open nozzle TECHNICAL DATA Clamping unit Clamping force: 3500 kN Mould opening force: 220 kN Moving platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions (H × V): 1060 × 1095 mm Tie bar spacing (H × V): 710 × 710 mm Mould opening stroke: 920 mm Mould installation height: 380 mm Daylight: 1300 mm Ejector stroke: 250 mm Ejector force: 95 / 48 kN Injection unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight for PS: 1304 g Screw speed (standard/option): 218 / 284 rpm Injection rate: 1508 cm³/s Output at standard screw speed: 108 g/s Output at increased screw speed: 141 g/s Gedpfsx Elukjx Alkjbl Electro-hydraulic equipment Pump motor power: 75 kW Installed heating power: 36 kW Number of heating zones (barrel): 7 Dry cycle time according to Euromap: 1550 1/h Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 16.7 t Machine dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, gaya penjepit: 3.500 kN, diameter sekrup: 70 mm, berat injeksi: 998 g, This Krauss Maffei KM 350-3000 was manufactured in 2003. It features a clamping force of 3,500 kN and a maximum opening stroke of 920 mm. The machine is capable of processing various materials such as PA, PP, PE, and ABS. If you are looking for a high-quality injection moulding machine, you should consider the Krauss Maffei KM 350-3000 hydraulic injection moulding machine we have for sale. Please contact us for further details. • Shot volume: 1,097 cm³ • Processed materials: PA, PP, PE, ABS • Cylinder temperature: up to 450 °C • Mold opening force: 220 kN • Moving platen force: Opening 105 kN / Closing 95 kN • Max. opening stroke: 920 mm • Min. mould height: 380 mm • Max. daylight: 1,300 mm • Dimensions of mounting plates (H x V): 1,060 x 1,095 mm • Tie-bar spacing (H x V): 710 x 710 mm Gbedpfx Alsyyxmvjksl • Ejector stroke: 250 mm • Ejector force (forward/backward): 95 / 49 kN • Max. mould weight: 4,950 kg Additional equipment • Handling system: Wittmann with the following robot travel paths (X/Y/Z): 420 / 1,200 / 2,000 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Injection Moulding Machine Krauss Maffei KM 350–2700 C2+ 🔹 Basic Information Manufacturer: Krauss Maffei Model: KM 350–2700 C2+ Year of Manufacture: 2004 Type: Hydraulic injection moulding machine Control system: MC4 (colour monitor, integrated control panel, floppy disk station) 🔧 Clamping Unit Clamping force: 3500 kN (350 tons) Opening force: 220 kN Movable platen force: - Opening: 105 kN - Closing: 95 kN Platen dimensions: 1060 × 1095 mm Tie bar spacing: 710 × 710 mm Opening stroke: 920 mm Max. daylight: 1300 mm Min. mould height: 380 mm Ejector: - Stroke: 250 mm - Force: 95 / 48 kN 💉 Injection Unit Screw diameter: 80 mm Injection pressure: 1829 bar Shot volume: 1433 cm³ Shot weight (PS): 1304 g Screw speed: 218 / 284 rpm Injection rate: - 1508 cm³/s - 108 g/s (standard) - 141 g/s (option – increased speed) 👉 Plasticising Unit: - Version for thermoplastics with abrasion protection - Check valve + open nozzle ⚡ Electro-hydraulic System Pump motor power: 75 kW Gbedpoyv E Nvefx Alkel Heater power: 36 kW Number of heating zones: 7 Dry cycle time (Euromap): 1550 cycles/h Oil tank: 720 l 👉 The machine is a very good candidate for ESS retrofitting (energy savings up to 30–60%). 📐 Dimensions and Weight Weight: 16.7 t Dimensions (L × W × H): 6.91 × 2.04 × 2.41 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Injection Moulding Machine KRAUSS MAFFEI KM 420-2000 CX Basic Information Manufacturer: Krauss Maffei Model: KM 420-2000 CX Machine number: 61030600 Year of manufacture: 2018 Control system: MC6 Control panel: Colour monitor integrated with operator console The machine is equipped with a fully hydraulic clamping system and a state-of-the-art MC6 control system. Plasticising Unit Complete plasticising unit dedicated to thermoplastics processing. High-performance screw: HPS-UN Screw diameter: 60 mm Non-return valve: yes Nozzle type: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Injection unit: SP 2000 Clamping Unit Clamping force: 4200 kN Mould opening force: 250 kN Platen dimensions (horizontal × vertical): 1270 × 1230 mm Tie bar clearance (horizontal × vertical): 800 × 800 mm Maximum mould opening stroke: 1020 mm Minimum mould height: 580 mm Maximum platen opening stroke: 1600 mm Ejector stroke: 250 mm Ejector force (forward / return): 95 / 49 kN Injection Unit Screw diameter: 60 mm L/D ratio: 23.3 Injection pressure: 2420 bar Injection volume: 792 cm³ Shot weight (PS): 720 g Injection speed: 130 mm/s Injection flow rate: 368 cm³/s Screw speed: 285 rpm Plasticising capacity: 72.2 g/s Nozzle contact force: 82 kN Electrical and Hydraulic Equipment Rated pump motor power: 75 kW Installed heater capacity: 29 kW Number of barrel heating zones: 6 (+1 extended nozzle) Gjdoyugkwopfx Alkebl Dry cycle time (EUROMAP 6): 3.0 s / 560 mm Required hydraulic oil volume: 1000 l Dimensions and Weight Net weight (incl. control cabinet): 21.5 t Machine dimensions (length × width × height): 6.90 × 2.49 × 2.38 m Maximum mould weight: 6700 kg Optional ESS Energy Saving System (Energy Saving Systems) The machine can be equipped with the ESS servo drive system, which increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed according to the current demand during the production cycle. Key Benefits - Reduction of electricity consumption by up to 30% - Servo drive technology for hydraulic pump - World-class quality and proven industrial technology - Reduced energy losses during idle operation - Lower heating of the hydraulic system - Extended lifespan of hydraulic components - Can be installed on existing hydraulic injection moulding machines

Kondisi: bekas, Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 44731, gaya penjepit: 500 kN, diameter sekrup: 25 mm, jarak antara tiang: 320 mm, berat injeksi: 47 g, tinggi cetakan (min.): 200 mm, langkah pembukaan: 550 mm, panjang total: 4.000 mm, lebar total: 1.163 mm, tinggi total: 1.787 mm, berat keseluruhan: 2.300 kg, frekuensi input: 50 Hz, tegangan masuk: 400 V, arus masuk: 58 A, Please refer to the pictures and video for the condition and contents of the offer. The system is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. Gbjdox Srggopfx Alkel The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Please visit our website to view our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications as well as errors in the item description may occur and are reserved.

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 22 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61035145, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, volume langkah: 393 cm³, tekanan injeksi: 2.429 batang, berat injeksi: 140 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 120 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 450 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 6.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we are offering our inspected and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry solution for all-electric injection moulding, enabling quick and innovative responses to market demands. It combines high performance, simple operation, and short delivery times. The machine is suitable for a wide variety of applications, including packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: Gbodpfoy Rmwdjx Alkjl – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine concept – Fast and reliable delivery due to the base machine concept featuring a broad range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, Year 2013) CONTROL - MC P1 with 15'' TFT colour display featuring multi-touch functionality CLAMPING UNIT - Clamping force: kN 1200 - Maximum mould opening force: kN 180 - Clear space (h x v): mm 520 x 470 - Mounting platen dimensions (h x v): mm 690 x 640 - Minimum–maximum mould height: mm 180–450 - Maximum opening stroke: mm 850 - Maximum mould opening travel: mm 450 - Ejector drive: electric - Ejector stroke: mm 120 - Ejector force fwd/rev: kN 27 / 33 - Ejector speed fwd/rev: mm/s 300 / 300 - Maximum mould weight: kg 850 INJECTION UNIT - Screw diameter / type: mm 35 / standard - Effective L/D ratio: 22.9 - Injection pressure: bar 2429 - Shot volume: cm³ 154 - Shot weight at max. stroke for PS: g 140 - Injection speed: mm/s 200 - Injection rate: cm³/s 192 - Screw speed: rpm 374 - Plasticising rate (standard screw): g/s 18.9 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 22.7 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 200 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight including control cabinet: t 6.7 - Length x width x height: m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve: single (BWAP) - Pneumatic control for hot runner shut-off: single - Electrical interface for pneumatic cascade: 4-fold - Euromap interfaces for automation: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold: 4-fold - Electrical prewiring for external hydraulic unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding function - Graphic analysis package - Swivelling device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Kondisi: bekas, Tahun pembuatan: 2006, jam operasional: 1.609 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61008195, gaya penjepit: 800 kN, diameter sekrup: 40 mm, jarak antara tiang: 420 mm, volume langkah: 201 cm³, tekanan injeksi: 2.500 batang, berat injeksi: 183 g, tinggi cetakan (min.): 400 mm, gaya ejektor: 22.600 N, lintasan ejektor: 150 mm, langkah pembukaan: 750 mm, panjang total: 3.960 mm, lebar total: 1.480 mm, tinggi total: 2.020 mm, berat keseluruhan: 3.550 kg, kapasitas pemanasan: 10,9 kW (14,82 hp), jenis penggerak: Hadraulisch, bentang bebas: 470 mm, berat alat: 1.000.000 g, Injection moulding machines direct from the manufacturer! As a manufacturer, KraussMaffei offers you our inspected and flexible stock machines: The fully hydraulic CX series features an especially compact, efficient, and flexible two-platen machine. The highly compact two-platen design with cantilevered clamping unit provides generous space for peripheral equipment and optimal accessibility. An efficient and intelligent energy management system with BluePower servo drive further offers a powerful basis to meet the highest demands, ensuring the right solution for any application. TECHNICAL DATA: KM 80 / 380 CX G01 (Order 38648713) CONTROL SYSTEM - MC 6 with TFT color display with multitouch functionality CLAMPING UNIT - Clamping force: kN 800 - Maximum mold opening force: kN 55 - Clear space between tie bars (H x V): mm 470 x 420 - Mounting platen size (H x V): mm 670 x 670 - Minimum/maximum mold height: mm - Maximum opening stroke: mm 750 - Maximum mold opening travel: mm 500 - Ejector drive: hydraulic - Ejector stroke: mm 150 - Ejector force fwd/back: kN 23 / 10 - Ejector speed fwd/back: mm/s 760 / 800 - Max. mold weight: kg 1000 INJECTION UNIT - Screw diameter/type: mm 40 / Standard (customization possible) - Effective L/D ratio: 20 - Injection pressure: bar 1,860 - Shot volume: cm³ 201 - Shot weight at max. stroke for PS: g 183 - Injection speed: mm/s 100 - Injection flow rate: cm³/s 126 Gbedpfx Aley Rlmwjkjl - Screw drive/rotation speed: 1/min 295 - Plasticizing rate (standard): g/s 12.3 - Nozzle contact force: kN 50 ELECTRICAL PARAMETERS - Connected load: kW 15.0 - Installed heating capacity: kW 10.9 - Power supply: V/Hz 400 / 50, 3 phases with neutral WEIGHT & DIMENSIONS - Net weight with control cabinet: t 3.55 - L x W x H: m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - 1 additional temperature control circuit for nozzle heating - 1-way air valve (BWAP) - Pneumatic hot runner shutdown control, 1-way - Hydraulic core pull, 1-way (BWAP) - Euromap interface for handling: E18, E63 - Euromap interface (central computer): E67, E77 - Adaptive Process Control (APC) - Injection-compression function - Graphic analysis package The machine is located at our facility in Parsdorf and is available at short notice. Additional options are available upon request. We look forward to your inquiry.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, 1 Gsdpjy Dqikofx Alksbl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Krauss Maffei KM 35-55 CX / Machine in very good technical condition Year of manufacture: 2008 Injection unit: Screw diameter: 18 mm Shot weight: 18 g Injection pressure: 2500 bar Dosage volume: 20 cc Clamping unit: Clamping force: 35 t Tie bar spacing: 320x320 mm Platen size: 540x540 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC V - touchscreen Additional equipment: Machine in very good technical condition EUROMAP 67 Robot interface Air valve x 2 Hot runner control x 6 Gsdey Dp Hujpfx Alkjbl Hardened injection unit - bimetallic The machine has been regularly serviced by authorized Krauss Maffei service in Germany The screw diameter can be changed to 20 mm or 22 mm Dimensions: Weight: 2600 kg Length/Width/Height: 3.50x1.40x1.70 m Drive: Pump/Motor: 11 kW Heating capacity: 3.78 kW Total connected load: 14.78 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2,007 bar Metering volume: 679 cc Clamping unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 interface Robot interface Air valve with vacuum monitoring x 1 Hydraulic core pull units x 3 Air core pull units x 3 Hot runner control x 10 Injection unit hardened – bimetallic Energy-efficient machine – equipped with a system with 3 variable-capacity hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Robot Krauss Maffei LRX Easy Control 100 Year of manufacture: 2019 4-axis robot: 3 axes driven by servomotors (electric); C axis – pneumatic Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt subject to surcharge Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Gbjdpfx Alsy Dqiqskjl Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of manufacture: 2018 Godey Dqi Repfx Alksbl Injection Unit: Screw diameter: 80 mm Shot weight: 1464 g Injection pressure: 1855 bar Dosage volume: 1608 cc Clamping Unit: Clamping force: 400 t Tie bar spacing: 920x830 mm Platen size: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC5 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. 19,000 h in automatic mode Euromap 67 Robot interface Min./max. mould installation height: 400/900 mm Air valve x 4 Hydraulic core pull x 4 Control with hot runner zones x 36 Self-sealing nozzle x 10 Injection unit hardened – bimetallic Proportional valve on the injection unit – precise injection Function for automatic extraction of the top tie bar Machine has been regularly serviced by authorized Krauss Maffei service Robot Krauss Maffei LRX 250 Year of manufacture: 2018 High-speed robot 5-axis robot: 5 axes driven by servo motors (electric): X, Y (telescopic), Z, B (rotation), and C Vacuum Touch control panel Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor at additional cost Dimensions: Weight: 22,650 kg Length/Width/Height: 7.58x2.73x2.32 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Krauss Maffei KM 80-180 CX with Sepro Industrial Robot 55 Sprue Picker Gbjdjy Dp Ifopfx Alkel Year of manufacture: 2005 Injection Unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Metering volume: 85 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC V - touchscreen Additional Equipment: Euromap 67 Robot interface Control with air valve One hydraulic core pull Hardened, bimetallic injection unit Sepro Industrial Robot 55 sprue picker Year of manufacture: 2018 It is possible to purchase a Moretto raw material feeding system at an additional cost. The set includes: - Volumetric screw dosing unit with hopper - Conveyor with proportional valve Dimensions: Weight: 3900 kg Length/Width/Height: 3.80x1.50x2.10 m Drive: Pump/Motor: 15 kW Heating capacity: 8.12 kW Total connected load: 23.12 kW All machines offered are started up and tested by our service technicians prior to sale. A video of the technical test of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: bekas, Motor, 1FK7060-5AF71-1DU5-Z, 4 pieces available. Motor, 1FK7100-5AF71-1AG0, 2 pieces available. Godsrbzx Ropfx Alkebl Motor, 1FW3204-1GN72-5CK0-Z, 1 piece available. Motor, 1FW3204-1GY72-5CK4-Z, 1 piece available. Motor, 1FW3204-7GN01-4GY7-Z, 2 pieces available. Display, 2 pieces available. Siemens line filter for 120 kW Act, 6SL3000-0BE31-2AA0, 1 piece available. Siemens Simodrive drive unit, 6SN1111-0AA00-1FA0, 1 piece available. Siemens single motor module, 6SL3126-1TE32-0AA0, 3 pieces available. Siemens single motor module, 6SL3126-1TE31-3AA3, 1 piece available. Siemens double motor module, 6SL3126-2TE21-0AA0, 2 pieces available. Siemens Active Line Module, 6SL3136-7TE31-2AA1, 2 pieces available. Siemens SINAMICS sensor module SMC20, 6SL3055-0AA00-5BA1, 6 pieces available. Siemens motor module, 6SL-3126-1TE31-3AA0, 1 piece available. Siemens motor module, 6SL-3126-1TE32-0AA4, 1 piece available. Siemens motor module, 6SL-3126-1TE21-8AA0, 2 pieces available. Siemens control unit, 6SL-3040-0MA00-0AA1, 2 pieces available. Siemens Simodrive drive unit, 6SN1111-0AA00-1FA0, 1 piece available. Motherboard

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 98.806 h, gaya penjepit: 40.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 255.000 kg, de-EN-20240617-km4000-sales-ad Gbedpfx Aeyt Hy Nelkel

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 99.161 h, gaya penjepit: 32.000 kN, diameter sekrup: 130 mm, berat injeksi: 8.100 g, panjang total: 4.900 mm, tinggi total: 4.200 mm, berat keseluruhan: 230.000 kg, sales-description-kraussmaffei-injection-molding-machine Gedpfeyt H Dhex Alkjbl

Kondisi: bekas, Tahun pembuatan: 1998, jam operasional: 101.215 h, nomor mesin/kendaraan: 23J01415, gaya penjepit: 23.000 kN, berat injeksi: 6.100 g, panjang total: 4.500 mm, tinggi total: 3.800 mm, berat keseluruhan: 205.000 kg, Two high-performance KraussMaffei injection molding machines are being offered for sale. The machines are KM 2300-14700 MC models, specifically engineered for high-volume production of large plastic components. Each unit features a clamping force of 23,000 kN, a screw diameter of 105 mm, and a maximum shot weight of 6,100 g. This makes them especially suited for manufacturing oversized parts and applications requiring substantial material throughput. Both systems come fully equipped with a comprehensive range of peripherals, including a KUKA KRC4 robot interface, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also part of the package. Machine details: Machine 1 - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 6) - Year: 1998 - Operating hours: approx. 101,215 h Machine 2 Gedpfx Aoyt Hidslksbl - Model: KraussMaffei KM 2300-14700 MC (IMM MC3F No. 9) - Year: 1997 - Operating hours: approx. 99,030 h Shared technical specifications: - Clamping force: 23,000 kN - Screw diameter: 105 mm - Maximum shot weight: 6,100 g - Machine weight: approx. 205,000 kg - Dimensions: - Depth: approx. 4,500 mm - Height: approx. 3,800 mm Both machines have been in operation in an industrial production environment and offer a reliable, proven solution for plastics processing companies looking to expand their large-part injection molding capabilities.

Tahun pembuatan: 2004, Kondisi: sangat baik (bekas), de Gsdpfsgbpnmsx Alkjbl

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, volume langkah: 393 cm³, Clamping force 1600 kN Max. tool opening force 87 kN Moving platen opening force 45 kN Moving platen closing force 38 kN Clamping platen (H x V) 820 x 845 mm Clear distance between tie bars (H x V) 520 x 520 mm Mold opening stroke 650 mm Min. mold installation height 300 mm Maximum opening stroke 950 mm Ejector stroke 150 mm Ejector force forward/back 23 kN Injection Unit: Screw diameter 50 mm Gsdpfey Nlb Sex Alkebl L/D ratio 20 Injection pressure 1892 bar Shot volume 393 ccm Shot weight (PS) 358 g Injection flow rate 177 ccm/s Screw speed 265 rpm Plasticizing rate 36.2 g/s Nozzle contact force 50 kN Electrohydraulic Equipment: Rated power of pump motor 22 kW Installed heating capacity 16 kW Number of heating zones (barrel) 5 Oil capacity 489 liters Dimensions and Weights: Floor space approx. 5.50 x 2.00 x 2.20 m Total weight 8200 kg Max. mold weight 1862 kg Accessories: - Vibration-damping elements - BluePower servo pump drive Additional Equipment: - 1 x air valve - 8 x hot runner controllers - 2 x core pulls on moving platen - 2 x core pulls on fixed platen - Robot interface to Euromap 67

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, jam operasional: 57.830 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 3.000 kN, diameter sekrup: 70 mm, volume langkah: 1.047 cm³, 01 Gsdpfxoy Nk Tae Alksbl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.900 h, gaya penjepit: 1.600 kN, diameter sekrup: 105 mm, jarak antara tiang: 18.701.420 mm, volume langkah: 4.546 cm³, panjang total: 13 mm, lebar total: 4 mm, tinggi total: 3 mm, berat keseluruhan: 83 kg, tekanan: 1.778 batang, 8 saluran panas 16 sekuensial pneumatik Godpfx Alsy I Apqeksbl 2 peniup SERVO POMPA PC MC6 BERAT 83T JARAK ANTAR PLAT 3400MM