Beli Madrew Ae-400 bekas (19.395)

Kondisi: baru, The AE-400 SERVO edger is designed for longitudinal edging and cutting of side boards supplied to the machine at high speeds (100-400 m/minute). The machine interfaces directly with feeding and receiving conveyors for boards, operating in fully automatic mode. The machine is equipped with a board scanner from above and below. The maximum temporary output of the edger, up to 50 boards/min, can be achieved when cutting 2.5m boards to the same width without altering the saw blade spacing. Any adjustment of the edger’s components to the board’s width changes the throughput. Depending on the operational configuration, the average machine output ranges from 35-48 boards/min. Technical data: No. | Parameter | Value --- | ----- | ----- 1. Main saw spindle drive motor power: 55 kW 2. Saw spindle rotation speed: 3550 rpm 3. Saw blade diameter: 400 mm 4. Maximum cutting height: 50 mm 5. Number of saw blades: 2 to 3 pcs (2 floating saws) 6. Minimum board length: 2000 mm 7. Maximum raw material length: 6200 mm 8. Maximum number of boards after cutting 1 board: 2 pcs 9. Feed rate: 100-400 m/min Cutting into 1 board – with two saw blades (2 floating blades): - Minimum saw blade spacing (board width after cutting): 75 mm - Maximum outer blade spacing (board width after cutting): 300 mm Cutting into 2 boards – with three saw blades (2 floating blades): - Spacing of blades on fixed coupling (board width after cutting): 50-100 mm - Spacing between floating blades (board width after cutting): 50-100 mm - Minimum width for cutting into 2 boards: 2 x 50 mm - Maximum width for cutting into 2 boards: 2 x 100 mm Bwedpfx Aonygvrem Isl Other machine configurations are available upon request. Machines are custom-built. We also manufacture other sawmill lines: log sorting lines, board sorting lines, board stackers, conveyors.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 300 mm, jarak gerak sumbu Z: 250 mm, Diameter kawat (maks.): 0,3 mm, berat keseluruhan: 2.300 kg, jumlah sumbu: 5, diameter kawat (min.): 0,1 mm, Mesin pemotong kawat 5-sumbu ONA AE 400 ini diproduksi pada tahun 2005. Mesin ini memiliki ukuran benda kerja maksimum 800 x 500 x 250 mm dan dapat menangani berat benda kerja maksimal hingga 500 kg. Mesin ini juga dilengkapi dengan tangki dielektrik berkapasitas 600 liter. Jika Anda mencari mesin wire cut berkualitas tinggi, pertimbangkan ONA AE 400 yang kami tawarkan untuk dijual. Hubungi kami untuk detail lebih lanjut. Bwodpfx Ajymal Ejm Ijl • Perjalanan sumbu U/V: 80 x 80 mm • Dimensi maksimum benda kerja: 800 x 500 x 250 mm • Berat maksimum benda kerja: 500 kg • Sudut kerucut maksimum: ±20° (pada tinggi 100 mm) • Kapasitas tangki dielektrik: 600 liter

Kondisi: bekas, Tahun pembuatan: 2001, Material width 400 mm Material thickness 0.5 – 4.0 mm Material cross-section 1200 mm² Roller diameter 80 mm Feed length up to 9,999.9 mm Bwjdpfx Amjvzxqls Iol Speed up to 90 m/min Machine weight approx. 0.5 t Space requirements approx. 1.2 x 1.0 x 1.2 m (LxWxH) Servo roll feed

Kondisi: baru, Mesin ini baru, belum pernah digunakan, berasal dari stok gudang. Kondisinya sangat baik, siap untuk digunakan. Bwedjyv R Nnjpfx Am Isl Spesifikasi teknis Produsen: EMK Model: KAE2A132M 4B3E2K Daya: 7,5 kW Kecepatan putar: 1455 rpm Tegangan: 400/690 V Frekuensi: 50 Hz Kelas efisiensi: IE2 Tingkat perlindungan: IP55 Mode kerja: S1 Kelas isolasi: F Desain: IM B3 Berat: sekitar 54 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module - max. 0.5 - 10 Pressure angle 15 - 25° Speed 2800 rpm Total power requirement 0.4 kW Machine weight approx. 0.02 t Space requirement approx. 0.4 x 0.2 x 0.2 m For profiling grinding worms for gear flank grinding machines. Finish and re-profiling on the following models: Bjdpfsvibc Hox Am Iswl NZA, AZA, RZ 300 E, RZ 301 S, RZ 362 A, AM,... Adjustable plate (right) with micrometer screw axial adjustment Adjustable plate (left) with micrometer screw radial adjustment 2 precision motor spindles for mounting diamond wheels.

Kondisi: bekas, Tahun pembuatan: 2003, Verfahrweg - x 300 mm Verfahrweg - z 400 mm Werkzeugaufnahme VDI 40 / VDI 50 Gesamtgewicht ca. 141 kg Bwedpjydqm Usfx Am Ijl Raumbedarf ca. 1,2 x 0,8 x 0,85 m Werkzeugvoreinstellgerät ULMER - Präzisa 400

Kondisi: baik (bekas), Kontrol SPS, unit pusat, memori kerja, CPU, perangkat pusat, modul pemposisian - Produsen: Siemens, SIMATIC S7-400 modul pemposisian FM 451 - Tipe: 6ES7 451-3AL00-0AE0 - Jumlah: 1 unit tersedia Bwodpswc Nncsfx Am Isl - Dimensi: 215/50/H290 mm - Berat: 1,4 kg

Kondisi: bekas, Tahun pembuatan: 1990, Saw blade diameter 400 mm Cutting length 400 mm Cutting diameter 130 mm Speeds 9.5 - 48 rpm Peripheral speed 12 - 60 m/min Cutting capacity at 90° round 130 mm Cutting capacity at 90° square 125 mm Cutting capacity at 90° rectangular 400 x 125 mm Cutting capacity at 45° round 130 mm Cutting capacity at 45° square 110 mm Cutting capacity at 45° rectangle right 200 x 125 mm Bwsdpfx Amouia Hrj Isl Cutting capacity at 45° rectangle left 280 x 125 mm Total power requirement 4 kW Machine weight approx. 1.5 t Space requirements approx. 1.2 x 2.0 x 1.7 m

Kondisi: baru, Heidenhain LC 181 pengukur panjang ML 540 mm Id. 341 240-04 SN:13505256M + AE LC 181 kepala pembaca Id. 359 122-02 SN:13505264E, belum pernah digunakan dalam kemasan asli yang telah dibuka, 100% berfungsi, ruang lingkup pengiriman sesuai foto. Bwsdox Dwrvspfx Am Iol

Kondisi: bekas, Keba input card DI 470/A Kemro K2-400 – suitable for Engel CC200 control system - Removed from an operational machine - Fully functional Manufacturer: Keba Bodpfxew Ah Nlj Am Iswl Type: DI 470/A Kemro K2-400 Manufacturer no.: 054943

Kondisi: bekas, Keba input card DI 470/A Kemro K2-400 – compatible with Engel CC200 control system - removed from an operational machine - fully functional Manufacturer: Keba Type: DI 470/A Kemro K2-400 Bwedpfx Asw Ah N Esm Iol Manufacturer No.: 054943

Kondisi: bekas, stamping-bracket-supra-clap-cewe-pae-50-400-3gn-3p1 Bwsdpfx Amexbh N Tj Isl

Kondisi: sangat baik (bekas), Simultaneous welding and plasma cutting capability. Output power: 400A/36V at 60% duty cycle, 310A/32V at 100% duty cycle. Bodpfxsud Rl Uj Am Iowl

Kondisi: baru, Mesin baru dari produsen Jerman terkemuka Baumüller Nürnberg. Mesin belum pernah digunakan, stok lama (old stock). Tidak ada tanda-tanda pemakaian. Spesifikasi teknis – dari nameplate: • Produsen: Baumüller Nürnberg GmbH • Tipe: GNA 132 MV • Tegangan: 400 V • Arus: 39 A • Daya: 12 kW • Kecepatan putar: 1260–4000 rpm • Tegangan eksitasi: 310–365 V • Arus eksitasi: 0,17–0,38 A • Kelas isolasi: F Bjdpfoyga Ugsx Am Iewl • Tingkat perlindungan: IP23 • Standar: VDE 0530 • Nomor seri: 88104349 Mesin ini cocok untuk aplikasi otomasi, CNC, mesin khusus, serta sebagai suku cadang untuk sistem penggerak Baumüller yang sudah ada. Harga tertera untuk 1 unit.

Kondisi: baru, Dijual: kontrol daya profesional (SCR) Advanced Energy seri Thyro-A. Perangkat BARU – belum pernah digunakan (stok penyimpanan gudang). Peralatan industri kelas atas untuk instalasi produksi tingkat lanjut. 🔧 Spesifikasi Teknis: Produsen: Advanced Energy Model: Thyro-A 3A 400-350 HF RL3 Tegangan: 400 V Arus: 350 A Keluaran: Relay Out 4A / 250V Tipe: pengendali SCR (thyristor) ⚙️ Aplikasi: - tungku industri - sistem pemanas - otomasi industri - pengaturan daya pada lini produksi 📦 Paket terdiri dari: - 3x modul Thyro-A - housing/radiator industri - kipas pendingin - paket lengkap sesuai foto ✅ Kondisi: BARU – belum pernah digunakan Kemungkinan ada sedikit tanda penyimpanan. Bwodpfjyw T Ipox Am Isl Fungsi 100% normal.

Kondisi: sangat baik (bekas), A device for precise setting, measurement, and inspection of CNC cutting tools. Equipped with an EZset optical camera system and EZvision software (Image Controller 1). The unit is in very good condition, complete, and ready for operation. Technical data and specifications: • Model: PRECIsset 400 • Measuring system manufacturer: EZset GmbH & Co. KG, Germany • Control monitor: Image Controller 1 • Software: EZvision • Documentation version: 1.1.1 (18.08.2006) • X / Z axis measuring range: up to 400 mm • Camera with image processing system • Capability to measure tool edge, length, and diameter • Saving and printing measurement results • USB and RS ports • Power supply: 12 V DC, 40 VA • Year of manufacture: approx. 2018–2019 • Supplied with original PRECITOOL technical documentation Condition: • Used, fully functional • Display operates correctly • Längsachse / Querachse axes reference properly • Well-maintained example from a German tool shop Functional description: The PRECIsset 400 enables fast and repeatable pre-setting of tools for CNC machining. The EZset vision system allows analysis of tool geometry and wear inspection. High measurement accuracy is ensured by a stable column and industrial-grade optics. Bjdpexn Awxofx Am Iewl

Kondisi: baru, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange cone Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) incl. grinding wheel T1SP 300x145x160 M 2.5 EW20° 3GG Cubitron by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to machine type Reishauer Bsdpjuayy Tsfx Am Iowl Profiling according to specification: module m, pitch accuracy gg, pressure angle EW Advantages: - Virtually eliminates the risk of grinding burn - Up to 50% shorter grinding times - Dressing effort reduced by a factor of two - Double service life of grinding wheels - Consistent grinding performance - Significantly higher grinding parameters compared to standard tools

Kondisi: baru, Max. grinding wheel width: 145 mm Grinding wheel diameter/bore: 300 mm Flange taper: Reishauer 0 Bsdpfxouayy Hs Am Iowl Grinding wheel dimensions: 300x145x160 mm Carrier flange (Machine type Reishauer RZ 400/800/1000) + including grinding wheel T1SP 300x145x160 M 1.5 EW20° 3GG from 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to Reishauer machine type Profile according to specified module m, tooth count gg, pressure angle EW Advantages: - Risk of grinding burn is virtually eliminated - Up to 50% shorter grinding times - Dressing effort reduced by a factor of 2 - Double the grinding wheel service life - Consistently stable grinding performance - Significantly higher grinding parameters compared to standard tools

Kondisi: baru, Grinding wheel width max. 145 mm Grinding wheel diameter/bore: 300 mm Flange cone: Reishauer 0 Grinding wheel dimensions: 300x145x160 mm Support flange (machine type Reishauer RZ 400/800/1000) incl. grinding wheel T1SP 300x145x160 M 2.25 EW20° 3GG by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to machine type Reishauer Bsdpfx Asuayyyem Ijwl Profiling according to specification: module m, lead gg, pressure angle EW Advantages: - Grinding burn risk virtually eliminated - Up to 50% shorter grinding times - Dressing effort reduced by a factor of 2 - Double the service life of grinding wheels - Consistently uniform grinding performance - Significantly higher grinding parameters compared to standard tools

Kondisi: baru, Grinding wheel width max. 145 mm Grinding wheel diameter/bore 300 mm Flange taper Reishauer 0 Grinding wheel dimensions 300x145x160 mm Carrier flange (machine type Reishauer RZ 400/800/1000) + grinding wheel included Bjdpfx Aouayymom Ijwl T1SP 300x145x160 M1 EW20° 2GG by 3M Ceramic grinding wheels for gear flank grinding – 145 mm wide Dimensions according to Reishauer machine type Profiling as specified: module m, pitch accuracy gg, pressure angle EW Advantages: - Risk of grinding burn approaches zero - Up to 50% reduced grinding times - Dressing effort reduced by factor of 2 - Double the service life of grinding wheels - Consistently uniform grinding performance - Significantly higher grinding parameters than standard tools

Kondisi: baru, catalog no.: H0561 – brand new machine, in stock – CE certificate – Austrian manufacture – professional grade – steel bar carriage trolley TECHNICAL DATA Motor power S1: 5500W (/750) Voltage: 400V / 50Hz Table height: 890mm Extraction port: 100mm Sliding table: 3200x435mm Extension table: 1200x550mm Max. cutting width with fence: 1300mm Saw blade diameter: 250-400mm (30) Scoring blade diameter: 120 x 20 x 3.2-4.2/2.2 mm Main blade speeds: I: 3000; II: 4000; III: 5000 rpm Scoring blade speed: 8000 rpm Scoring blade motor power: 750W Blade tilt: 0-45° Sound power level: 90 dB(A) Sound pressure level: 88.2 dB(A) Overall dimensions when assembled (LxWxH): 3350x3600x900mm Shipping dimensions: 1350 x 2200 x 1170 mm Net/gross weight: 930 / 1110kg Features: Bsdpfxoyg Iu Is Am Iswl – robust construction – equipped with a large aluminum sliding table and outrigger, ideal for processing large workpieces and cutting big, heavy boards to size – cast iron working table (1100 x 700 mm) with table extension (900 x 830 mm) and table depth extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + crosscut fence (1950 – 3300 mm) – separate motor for scoring saw – manual main saw blade tilt adjustment from 0° to 45° (with angle indicator) – electric height adjustment of main saw blade and scorer Scope of supply: Main saw blade LEUCO TCT (Ø300 x 30 x 3.2 mm T72) Scoring blade LEUCO (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – optional Net price: 24,300 PLN Net price: 5,750 EUR (based on exchange rate of 4.20 EUR) (Prices may vary with exchange rate fluctuations)

Kondisi: sangat baik (bekas), 7259 Bedeyka E Topfx Am Iewl

Kondisi: sangat baik (bekas), CATALOG NUMBER 72133 TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Maximum blade diameter: 300 mm - Blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From above: - Pneumatic hold-down - Pawls - 2x metal pressure rollers - Pawls - Saw shaft - Smooth pressure roller - Pawls - Smooth pressure roller Bodpfxoyr Rmqs Am Iowl From below: - 2x metal, toothed feed rollers - Pawls - Track - Saw shaft - Track - Stepless feed speed adjustment via frequency inverter - Main motors: 2x55 kW - Feed motor: 4 kW - Hydraulic raise/lower of housing - Hydraulic adjustment of saw shafts - Pump motor: 0.37 kW - Centralized lubrication - Extractor hood diameter: 1x300 mm, 1x380 mm - Dimensions (LxWxH): 3200x2350x2000 mm - Weight: approx. 5500 kg ADVANTAGES – Made in Italy – Dual-shaft – Used multi-blade saw, very good condition Net price: PLN 238,900 Net price: EUR 56,880 Net price calculated at exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in both industrial and laboratory environments. The device is commonly used for: • Quality control (QC) • End-of-line production testing • Laboratories and OEM test stations — Basic specifications • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last ETL factory calibration: 05/2023 • Weight: 38kg — Equipment / included in the set • Main ATS 400 X8 unit with built-in touchscreen • Windows 10 Pro operating system (OEM) • Full set of test cables and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE marking Bodpfeyc H N Nox Am Iowl — Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering, all connectors and interfaces are complete

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, Feeder/Uncoiler/Straightener LARA DEMAE-10000/100/1400-D – Year 2018 Inspected, ready for production. Complete coil feeding line combining uncoiling, straightening and servo-driven feeding in a single compact unit. Engineered for continuous operation in cutting, stamping or deep drawing lines, offering high precision and reliability. Rugged construction, ideal for carbon steel, stainless steel and aluminium. Main components • Motorized hydraulic decoiler - Heavy coil handling capacity - Motorized coil loading car for quick coil change - Loop control via laser sensor - Loading area protected with safety barriers while ensuring excellent process visibility • Combined straightener-feeder - Head with 11 straightening and feed rollers - AC servomotor with PLC control + touchscreen HMI - Automatic feeding and unpinching for easier strip threading • Integrated electrical and hydraulic systems - Separate electrical cabinet - Precise feed control and synchronization with downstream equipment Main technical data - Maximum strip width: 1,400 mm - Sheet thickness: up to 3 mm (carbon steel / aluminium) up to 1.5 mm (stainless steel) - Electrical supply: 400 V / 50 Hz Bsdpfsy Edfzox Am Ijwl - Hydraulic pressure: up to 130 bar