Beli Metkon Metallografie Metallografie Mount Tekan bekas (13.462)

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Attention - Do not purchase used metallography equipment! Anyone familiar with metallography knows: “used” unfortunately means “worn out”: Unless these machines are thoroughly cleaned every day, their heavy workload will lead to total failure within just a few years. The ECOPRESS 102 is a fully automatic hot mounting press with an electrohydraulic pressure system, so no separate compressed air connection is required. Operating pressure reaches up to 300 bar and embedding temperature up to 200°C. The embedding time is programmable up to 60 minutes. Due to the fully automatic cycle and integrated automatic cooling, short cycle times are achieved: Thermostatically controlled heating and cooling times, 1650 W heating power, automatic cooling cycle. The ECOPRESS 102 mounting press is supplied with a pressing cylinder and a piston (option: intermediate piston for two samples) with diameters of 25 / 30 / 40 / 50 mm (and inch sizes). (The ECOPRESS 202 comes with two mounting cylinders.) The end of the mounting cycle is indicated by an acoustic signal. The delivery includes everything ready for operation (including the pressing cylinder, piston, and intermediate piston for two samples required for your application). Required connections: 230V / 50 Hz, single phase (220V), water inlet and outlet. * 1650 watts heating power * up to 200° C embedding temperature * embedding time adjustable up to 60 minutes * automatic cooling cycle * no compressed air required * 12-month warranty Includes a selection/sample pack of consumables comprising: Psdpfxscwamxo Anwjpt * 5 x 1 kg (5 kg) of various mounting resins * Release agent (400 ml) Delivery by freight forwarder, free within Germany (ex works). Option: On-site installation by our technicians.

Tahun pembuatan: 2021, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin penggerinda dan pemoles metalografi Metkon FORCIPOL 202, dibeli pada tahun 2021. Barang ini belum pernah digunakan. Pabrikan: Metkon Model: FORCIPOL 202 Jumlah roda: 2 Kecepatan roda: 50-600RPM Arah putaran roda: searah jarum jam/berlawanan arah jarum jam (CW/CCW) Dimensi PxLxT (cm): 87 x 74 x 34 Berat (kg): 45 Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi saya. Pjdpfx Anjy Hpphswopt

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), SERVOCUT 302-MA Automatic Abrasive Cutting Machine Note: Do not purchase used metallography equipment: "Used unfortunately means worn out in this context." Abrasive materials can (unless thoroughly cleaned daily) cause total failure within just a few years. * Cutting machine for a wide range of different programmable cutting methods * Programmable via 7" touchscreen panel with SIEMENS PLC control * Programming of cutting parameters via LCD display Ppodpfx Aecw Ipaonwot * Automatic traversing table + manual chop cut (other models available) * Precise motorized positioning of the sample on the X-, Y-, and Z-axes * Integrated traversing table control with force-dependent adjustable feed rate * Variable cutting force, pulsed operation, overload protection for the drive motor * Compact motor: 2,800 rpm cutting disc speed * Electronic braking system * Cutting depth up to 110 mm solid material (with 300 mm cutting discs) * Double, split (left/right) T-slot table made of stainless steel * Base made from solid die-cast aluminum * Incl. 80 l recirculating cooling system complete with connection hoses * Delivered ready for operation (without clamping devices) * Power supply: 400 V / 50 Hz, 3-phase with neutral, 16 A fuse required * Delivery includes trial consumable set consisting of: * Set of 20 cutting discs diameter 300 mm * 5 liters METCOOL coolant

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Attention: Do not purchase used metallography equipment! Anyone experienced in metallography knows: "Used" unfortunately means "worn out" in this field. Abrasive particles can, if not thoroughly cleaned daily, lead to total equipment failure within just a few years. Grinding / Polishing Machine, Grinding Disc Diameter 250 mm Ppodpfx Anoptc Dswst - New or often as-new demonstration units available at special prices. - This is a standard machine suitable for manual sample preparation. - An automatic sample mover can be offered as an option. The machine is delivered ready for operation: - Base unit with 250 mm grinding disc diameter - 250 mm plastic grinding plate (aluminium plate optional) - Splash guard ring - Lid - Connection accessories for water cooling and drainage - German/English operating manual - Optional: Grinding paper, diamond grinding discs, polishing cloths, diamond suspensions, lubricant, etc. Price includes shipping costs / Delivery by technician can be arranged at extra charge. Non-binding offer, subject to prior sale.

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Attention – do not buy used metallographic equipment! Anyone experienced in metallography knows: in this field, 'used' unfortunately means 'spent': Abrasive particles can (unless thoroughly cleaned daily) lead to total machine failure within just a few years. The METACUT 302 is the most affordable quality wet abrasive cut-off machine available on the market. The cutting operation is performed entirely manually via the hand lever on the right side. Manual cutting is often the most efficient method, and the job is finished before an automatic cut-off saw is even programmed. To enable cutting of extremely long workpieces, a side pass-through opening has been added to the left side of the machine. Highlights: * Manual, abrasive wet cut-off saw * 4.6 kW compact motor with electronic braking system * Cutting capacity for solid workpieces up to Ø 90 mm (110 mm with Ø 300 mm cutting disc) * Suitable for cutting discs up to Ø 250 / 300 mm * Double T-slot table made from stainless steel * Base assembly made of solid die-cast aluminum Ppodpj Ebqnsfx Anwst * Machine body powder-coated, protective hood made of fiberglass-reinforced plastic (FRP) * 80-liter recirculating coolant system with tank and pump included as standard. Ready for operation upon delivery (Options: clamping device, base cabinet) Delivery includes a consumable starter kit consisting of: * Selection of 20 cutting discs * 5 liters of METCOOL coolant Delivery by freight carrier, free domicile within Germany (Option: installation by our technicians on site)

Tahun pembuatan: 1969, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, gaya penekanan: 16 t, panjang langkah: 250 mm, panjang meja: 780 mm, lebar meja: 400 mm, nomor mesin/kendaraan: 792769/4260, Tidak ada harga minimum - penjualan dijamin kepada penawar tertinggi! Pengajuan penawaran mewajibkan pengambilan tepat waktu antara 23.06.2026 dan 26.06.2026! RINCIAN TEKNIS Daya tekan: 16 t Langkah kerja: 250 mm Luas pemotongan: 400/1 mm² Ukuran meja: 780 x 400 mm Diameter lubang: sekitar 90 mm Diameter roda gila: 1.600 mm RINCIAN MESIN Dimensi & Berat Dimensi (P x L x T): 1.600 x 1.600 x 2.000 mm Berat: 700 kg Referensi eksternal: 15 Ppodpfx Asy D Sgwsnwjt

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1977, nomor mesin/kendaraan: 212355, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 40 t, panjang langkah: 50 mm, lebar meja: 510 mm, panjang meja: 700 mm, penyesuaian silinder hidrolik: 80 mm, kecepatan rotasi (maks.): 400 rpm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Penawaran mengikat untuk pengambilan tepat waktu antara 23.06.2026 dan 26.06.2026! DETAIL TEKNIS Gaya tekan: 40 t Rentang putaran: 65 – 400 rpm Langkah ram: 8 – 50 mm Penyesuaian ram maks.: 80 mm Dimensi meja: 700 mm x 510 mm Decoiler Model: KEMMERICH V 500 AE Diameter: 1.200 mm DETAIL MESIN Daya penggerak: 7,5 kW Dimensi & Berat Dimensi (P x L x T): 4.000 x 1.200 x 2.100 mm Ppsdpfxsy D Ryce Anwjt Berat mesin: 4.000 kg Referensi eksternal: 60

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, nomor mesin/kendaraan: 1204197, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 125 t, panjang langkah: 120 mm, lebar meja: 700 mm, panjang meja: 1.100 mm, diameter lubang: 52 mm, penyesuaian silinder hidrolik: 100 mm, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! Pemberian penawaran mewajibkan pengambilan tepat waktu antara 23.06.2026 dan 26.06.2026! DETAIL TEKNIS Gaya tekan: 1.250 kN Rentang kecepatan putar: 30 - 250 rpm Langkah ram: 8 - 120 mm Penyesuaian ram: 0 - 100 mm Diameter lubang pasak: 52 mm Ukuran meja: 1.100 x 700 mm Podpfjy D Nnljx Anwjpt DETAIL MESIN Produsen kontrol: UNIDOR Daya penggerak: 35 kW Dimensi & Berat Dimensi (P x L x T): 6.000 x 2.400 x 3.300 mm Berat mesin: 12.000 kg PERLENGKAPAN Uncoiler, diameter sekitar 1.200 mm Lemari laci bengkel dengan peralatan penjepit Referensi eksternal: 68

Kondisi: bekas, Tahun pembuatan: 2003, nomor mesin/kendaraan: 0-306-04-2737, lebar kerja: 800 mm, panjang sabuk konveyor: 4.800 mm, kecepatan pemakanan sumbu X: 37 m/menit, tinggi kerja: 1.400 mm, panjang kerja: 2.300 mm, 1 Pjdpfxey Uwmqe Anwopt

Kondisi: bekas, Tahun pembuatan: 2002, nomor mesin/kendaraan: 0-306-04-1262, lebar kerja: 600 mm, panjang sabuk konveyor: 3.000 mm, kecepatan pemakanan sumbu X: 40 m/menit, tinggi kerja: 1.300 mm, panjang kerja: 2.500 mm, 8535 Ppodpoy Uv Iysfx Anwet

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 2.200 mm, lebar benda kerja (maks.): 800 mm, tinggi benda kerja (maks.): 40 mm, panjang langkah: 150 mm, nomor mesin/kendaraan: 52850199, translation_de_2024-06-18_1 Pjdpfx Asy Tn R Renwspt

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1995, kapasitas angkut: 70.000 kg, nomor mesin/kendaraan: 65068, Perlengkapan: derek, kabin, kebisingan rendah, Beschreibung Gebrauchter LKW-aufgebauter Gelände-Kran Hersteller: Tadano Faun Modell: ATF70-4 Der Kran verfügt über eine maximale Tragfähigkeit von 70 Tonnen. Die Maschine wird im aktuellen Zustand verkauft. Angetrieben von einem Dieselmotor. Ppsdpfxeul Uvuj Anwet Für weitere Informationen kontaktieren Sie bitte: VIJAY JPN Industrial Trading Pte Ltd 13A Pandan Crescent, Singapore 128478

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 45157, berat muatan maksimum: 50.000 kg, warna: kuning, Tahun pembuatan: 1996, Perlengkapan: hidrolik, kebisingan rendah, penggerak semua roda, winch kabel, de-1 Ppedjul Uu Repfx Anwst

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 450 kW (611,83 hp), Tahun pembuatan: 2025, de Psdsq Nfvuopfx Anwspt

Kondisi: baru, Bending tools/punches for Trumpf press brake H256mm, L500mm, L550mm in segments Psdpjiimz Rsfx Anwept

Kondisi: baru, Press brake tools/punches for Bystronic press brake P5 RFA style, 30 degrees, H250mm, R1.0mm Pedpjiim Dwsfx Anwjpt Flexible lengths: L500mm/508mm/515mm; L550mm in segmented sections

Kondisi: baru, Press brake punch for Amada/Promecam 30-degree, radius 0.6 mm, height 104 mm, length 835 mm, length 835 mm, sectioned Ppodpfx Ajin I Dtsnwst

Kondisi: baru, 85 degree press brake punch for Amada/Promecam R2.0mm, H145mm, L835mm, L835mm sectioned Podpfx Asin I E Hjnwopt

Kondisi: baru, Sonder-Umformwerkzeug Ppodpoiq Di Hofx Anwst

Kondisi: baru, Punches and dies for EHT press brake Ppodelp Hnzopfx Anwot

Kondisi: baru, Trumpf 标准折弯机模具，86°，R1.0mm，H157mm，最大承载 40 吨/米，长度 500mm & 550mm，分段设计。 Ppjdpfxetw Uxbe Anwst

Kondisi: baru, EHT Pressbiegemaschinen-Stempel 86° H220mm R0,5mm Segmentierte Längen Pedsvlwn Ropfx Anwspt

Kondisi: baru, 88 degree press brake punch for Amada/Promecam, R0.6mm, H120 mm, L835mm, L835mm sectioned Psdsin I D Espfx Anwjpt

Kondisi: baru, Stempel für Abkantpressen, Multi-V Matrizen Podeip Dayspfx Anwjpt

Kondisi: baru, Punches and dies for EHT press brake Ppsdpoiq Dnkofx Anwet