Beli Norgren 4546666000000000 bekas (14)

Kondisi: bekas, 454666600000, NORGREN, metering cylinder, adhesive cylinder, and synchronous motor Ksdpfxeuz D Nds Afiolr Model: 454666600000 Condition: Used

Kondisi: hampir baru (bekas), Norgren I374997 Ksdpfxet T Hlkj Afielr

Kondisi: bekas, Pneumatic cylinder, air cylinder, pneumatic ram, air ram -Stroke: 150 mm -Piston diameter: 63 mm -Quantity: 6 units available -Price: per piece -Dimensions: 460/75/H105 mm -Weight: 3 kg/piece Kjdpfx Afed Hvh Eoislr

Kondisi: bekas, Pneumatic cylinder, air cylinder, pneumatic piston, air piston, round cylinder -Stroke length: 400 mm -Piston diameter: 25 mm Kodped Hvhvefx Afislr -Quantity: 2 units available -Price: per piece -Dimensions: 580/28 mm -Weight: 0.7 kg/piece

Kondisi: bekas, Pneumatic cylinder, air cylinder, pneumatic ram, air ram Kjdsd Hvhtepfx Afijlr -Stroke: 115 mm -Piston diameter: 50 mm -Quantity: 6 units available -Price: per unit -Dimensions: 400/65/H90 mm -Weight: 2.3 kg/unit

Kondisi: bekas, Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons Kjdpfxod Hvhxo Afiolr - Stroke length: 260 mm - Piston diameter: 80 mm - Quantity: 2 units available - Price: per piece - Dimensions: 610/95/H95 mm - Weight: 6.5 kg/piece

Kondisi: bekas, Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke: 320 mm Ksdpfx Ajd Hvh Dofijlr -Piston diameter: 50 mm -Quantity: 2 units available -Price: per piece -Dimensions: 530/65/H90 mm -Weight: 2.9 kg/piece

Kondisi: baik (bekas), Linear actuator, linear gearbox, lift gearbox, spindle drive -Manufacturer: Norgren -Type: M/46025B/M/320 Kodpfed Hui Hjx Afielr -Stroke: 320 mm -Piston: 25 mm -Dimensions: 520/70/H60 mm -Weight: 1.6 kg

Kondisi: baik (bekas), Pneumatic cylinder, air cylinder, pneumatic piston, air piston - Stroke length: 60 mm - Piston diameter: 40 mm - Quantity: 5 units available - Price: per piece - Dimensions: 255/55/H80 mm - Weight: 1.1 kg/unit Klsdpfx Afjd Hvh Tsior

Kondisi: baik (bekas), Linear actuator, linear gearbox, lifting gearbox, transfer rail, conveyor rail Klsdpfsii Sdzex Afier - Linear actuator: with toothed belt - Stroke: 2480 mm - Drive shaft: hollow shaft, Ø 14 mm - Note: without motor, can be supplied at extra cost - Transport dimensions: 2800/150/H135 mm - Weight: 24 kg

Kondisi: baru, Katup pengaman pers IMI HERION / NORGREN Katup PSV, katup kembar, katup arah Tipe: XSz 10 V Id.-No. 2492982 No. Seri 2608 Sama dengan no. pesanan: 2492951 Tekanan: 3 hingga 10 bar Ulir sambungan udara tekan (A)+(B)+(P)+(S): 1/2" Keluaran udara tekan (R): sambungan flange Tegangan suplai: 2x 24 Volt (DC) - Jarak lubang pelat dasar 115 x 63 mm, 4x lubang pemasangan Ø 6,5 mm - Dilengkapi dengan peredam suara pada keluaran udara tekan (R) Dimensi badan katup P x L x T: 105 x 90 x 220 mm Dimensi dengan peredam suara P x L x T: 180 x 165 x 220 mm Berat: 3,0 kg Baru, belum digunakan, dari stok gudang Kedpow T U A Ssfx Afielr

Kondisi: baru, Connection G 1/4 adjustable range: 0.7 - 8 bar Weight: 0.86 kg Kjdpfod Ih N Sex Afislr Pressure Regulator Housing: Zinc alloy without pressure gauge including operating manual 10 pieces available!

Kondisi: bekas, PerkinElmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General Information: Dual-furnace differential scanning calorimeter with power compensation. PerkinElmer DSC 8000 featuring Intracooler 2 for precise heat flow measurements from approx. –70 °C to 750 °C, offering high sensitivity and rapid thermal response. General Device Specifications: DSC Type: Dual-furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance: Standard Temperature Range: approx. –180 °C to 750 °C (with appropriate cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance: Dynamic Range: ±800 mW (typical) High sensitivity and rapid response time due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control: Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Klsdoyluicjpfx Afier Interfaces and Connections: USB Ethernet (LAN) Gas inlet fittings Cooler unit connection Power supply connection Accessory connections (e.g., autosampler, high-pressure cell, UV/photo calorimeter module) Temperature calibration interface Technical Data: 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum Power: 400 VA Accessories: Cooling system Polyscience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler, 96 positions High-pressure DSC cells, UV/photo calorimeter accessories IEC power connector Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz / A / Ph: 50 / 7.5 / 1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Kondisi: bekas, Tahun pembuatan: 2004, Max. turning diameter 250 mm Turning length 100 mm Control system SIEMENS 840 D Total power requirement 35 kW Machine weight approx. 7,500 kg Space requirement approx. [to be filled in] E M A G Vertical CNC hard turning and grinding machine with tool turret and automatic workpiece loading system Model VSC 250 DS Year 2004 # M7 28.69324 Max. turning diameter 250 mm Turning length inside/outside approx. 100 mm Workpiece length min./max. 29 – 100 mm 6-station tool turret Ø or swing diameter 480/790 mm Slide travel X / Z (workpiece slide!) / stroke 680 / 400 / 200 mm Feed / rapid traverse X/Z 45 / 30 m / min Feed force X/Z 5.5 / 11 kN Spindle speeds 4,300 / 6,000 rpm Spindle drive approx. 28 kW Total drive approx. 35 kW - 380 V – 50 Hz Weight 7,500 kg Kledpfx Afot Hxa Teijr Accessories / Special equipment • CNC path control SIEMENS 840 D with color display, graphics, menu-guided dialog programming and all standard options, cycles, and subprograms, etc. • 6-position hexagonal tool turret with 6 tool stations (Ø 40), without motorized drive, but functioning as a swiveling axis (B-axis), double bearing and with directional logic • 2 GMN grinding spindles mounted at turret positions T3 and T6, speeds approx. 42,000 rpm and 18,000 rpm, equipped with one CBN wheel and one ceramic pin • Workpiece loading system with circulating carrier frame for workpieces approx. 130 mm • MARPOSS MIDA – tactile measuring device at the workpiece change station for rough and finish measurements • NORGREN air gap measuring system (?), hydraulic weight compensation for the main spindle • SMW Autobloc 3-jaw diaphragm chuck (for simplified loading of billet parts) approx. Ø 250 mm, with clamping monitoring • HYFRA recooling unit for cooling the main spindle and thermal stabilization of the machine body, advanced SEITZ paper band filter system, retractable chip conveyor, coolant chiller for grinding emulsion, oil mist extraction, magnetic separator, central lubrication, etc. Vertical CNC lathes provide a thermally stable design (chips do not fall onto the machine bed), quick workpiece change times (pick-up system via main spindle), and a rigid tool setup that also enables non-standard machining processes. In this application, hardened gears were hard-turned and ground. Condition : Good – ready for demonstration shortly Delivery : Ex stock – as inspected Payment : strictly net – upon receipt of invoice