Beli Presona Ab Baler Dengan Pengikat Silang 8 Kali Lipat bekas (44.736)

Kondisi: bekas, Tahun pembuatan: 1992, Temperature controller, temperature control unit, modular temperature control device, mold heater - Manufacturer: PSG, temperature control unit for mold heating with up to 8 control zones - Model: RSD II 8 - Max. power: 28 kW - Transport dimensions: 490/430/H460 mm Psdpfx Ajudqb Aonwegl - Weight: 30 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Podpfx Aey S Ru Aenwogl Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 37.656 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 85 t, lebar bukaan pengisian: 1.500 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 650 kg, berat keseluruhan: 25.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2024, laju aliran volumetrik: 410 m³/jam, lebar transportasi: 2.400 mm, panjang transportasi: 9.300 mm, Good day, Pgsdpfxjv T I Evj Anwsl We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for the accuracy and completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale size: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used by a recycling company for compaction of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed in the last 3 years. The machine has been regularly maintained. We would be pleased if this baler is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, jam operasional: 30.143 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 570 kg, berat keseluruhan: 20.000 kg, kapasitas tangki oli: 600 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 800 m³/jam, en-1 Pgedpfx Anjy S Rtlowjl

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 24.629 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.650 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 900 kg, berat keseluruhan: 24.000 kg, tinggi transportasi: 3.000 mm, kapasitas tangki oli: 2.000 l, daya: 90 kW (122,37 hp), laju aliran volumetrik: 1.350 m³/jam, lebar transportasi: 2.400 mm, panjang transportasi: 10.000 mm, en-001 Pgjdpfx Aneymmmpswel

Kondisi: diremaj di bengkel (bekas), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Edge thickness in laths/strips (min/max) mm: 0.4 / 1 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 3300 Control/Software: ICOS Open (Windows XP) Without transfer rail (Master & Slave systems) Feed speed (adjustable) m/min: 7 - 35 Cam spacing (mm): 270 FORMAT PROCESSING (per side): - Spraying device (for liquid anti-adhesive) Podpfx Aoyyya Donwjgl - Jointing milling unit - 08.379 (2 x 4 kW) EDGE PROCESSING (per side): - Gluing unit (hot melt adhesive + premelter) VTG + 283.205 - Pressure zone (CNC controlled) + edge magazine for rolls (No. 6 fold) - End trimming unit 08.42/30/B (2 x 0.66 kW) Max 30 m/min - Milling unit 08.055 (1 x 2 kW) 0°-30° - Contour milling unit (for fine finishing) CNC controlled KFA 30 (1 x approx. 0.5 kW) 30 m/min - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Spraying units (for polishing fluid) - Buffing unit 08.617-2 (2 x 0.18 kW)

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED FORMATTING AND EDGE BANDING MACHINE – First (1st) machine in a production line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.4 / 1 Roll material (edge) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows XP) Feed speed (adjustable) m/min: 10 – 50 No transmission bar (Master & Slave systems) FORMATTING UNIT (each side): Spraying unit (for liquid non-stick agent) Milling unit (2 x 8 kW) Pgodjyypi Uopfx Anwsl EDGE BANDING UNIT (each side): Gluing unit (hot-melt glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (number of compartments): 6 Servo-drive guillotine shear (for cutting edges) Pressure zone (CNC-controlled) Pre-milling unit 08.055 (2 x 1 kW) 0°–30° Profile scraper unit 08.519 Flat scraper unit 08.50 Buffing unit 08.617-2 (2 x 0.18 kW) Spraying unit (for polishing fluid) Universal milling unit for grooving, rebating, and profiling – 08.190 (1 x 4.5 kW) 0°–90° / 180°–270°

Kondisi: baik (bekas), Tahun pembuatan: 1980, nomor mesin/kendaraan: 80416010, Penawaran 26017 Data teknis: - Jangkauan maks.: 250 mm Pgjdpfoyzf I Aox Anwel - Kedalaman kerja: 217 mm - Jarak tengah rol: 80 mm - Ketebalan material maks. pada kekuatan 40 kg/mm²: 1,75 mm - Kecepatan kerja dapat diatur secara variabel - Putaran kanan & kiri - Penggerak: 400 V, 1,1 / 1,4 kW - Kebutuhan ruang kira-kira: L 500 x T 1450 x D 655 mm - Berat kira-kira: 250 kg - dengan: pedal kaki elektrik, set rol, pelat penahan

Kondisi: sangat baik (bekas), translation-001 Psdpfewz Ic Aex Anwegl

Kondisi: sangat baik (bekas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINE – First (1st) machine in a line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge material (thickness, min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Pgedpfeunrwnox Anwel Working width (min/max) mm: 236 / 1300 Control / Software: ICOS Open (Windows-based) Feed speed (adjustable) m/min: 10 – 50 Protective and soundproof cabins FORMATTING UNIT (each side): Milling unit 75.30 (2 x 6.6 kW) Free station EDGE BANDING UNIT (each side): Gluing unit (hot-melt glue + premelter) 04.1570 + 283.201 Pressure zone Edge magazine for rolls (slot no.): 6 Pre-milling unit 08.055 (2 x 1 kW) 0°-30° Milling unit 08.055 (2 x 0.66 kW) 0°-30° Profile scraping unit 08.515 Free station Buffing unit 08.617-2 (2 x 0.18 kW) No. 2 universal milling units for grooving/rebating and profiling DX: 75.30 (2 x 4.4 kW) 90°-180°

Kondisi: sangat baik (bekas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 240 / 2500 Control system: PC 22 Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (per side): Pre-milling cutter (trimming) 1 x 4.5 kW (hydro) Milling unit KD 11 (2 x 8.1 kW) hydro Pgjdpfelikydjx Anwsl EDGE BANDING SECTION (per side): Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (slot No. 6) Edge pressure zone "C" Pre-milling unit 2 x 0.55 kW Milling unit MF 20 (2 x 0.55 kW) 20° Profile scraping unit PN 20 Finishing unit (flat scraper + buffing unit) FA 11 Free slot

Kondisi: baik (bekas), Tahun pembuatan: 2008, Mesin pengikat silang otomatis dengan meja putar Pengikatan tunggal maks paket/menit: 40 Pengikatan ganda maks paket/menit: 20 Pengikatan silang maks paket/menit: 18 Lebar paket: 200-560 mm Panjang paket: min 200 mm Psdeg Nzv Uspfx Anwjgl Tinggi paket: 10-440 mm Diagonal paket untuk pengikatan silang: maks 560 mm Listrik: 200-440V, 3Ph AC, 50 Hz, 1,5 kW Berat: 540 kg

Tahun pembuatan: 2000, Kondisi: baik (bekas),

Kondisi: bekas, Tahun pembuatan: 1999, nomor mesin/kendaraan: 103638, Machine translation: Heidelberg Stahlfolder KD 78-4-KZ Folding Machine / Falzmaschine Year: 1999 - Serial No.: 103638-258036 - Maximum working width: 780 mm - Round pile feeder - 1st folding station: 4 buckle plates - 2nd folding station: 3 folding knives left/right, stream delivery Podomikq Aepfx Anwsgl - Standing sheet delivery stacker Stahl SBP 46 - Rietschle compressor - Manuals included Online video inspection possible via Skype video. We would be pleased to welcome your visit – more machines in stock. Available immediately – inspection possible. Located in Emskirchen / Nuremberg – test runs possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 8.900 h, nomor mesin/kendaraan: LP50VH2, Used Presona LP50 VH2 baler in good working condition with conveyor belt Technical data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h Pgedpfx Asyrhi Nsnwol - Productivity at bulk density: - 30 kg/m³ = 7–9 t/h - 50 kg/m³ = 8–9 t/h - 100 kg/m³ = 11–14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm - Loading chamber volume: 2.7 m³ - Bale width: 1,100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank volume: 600 l - Electric motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: - Conveyor width: approx. 1,300 mm - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Baler, control cabinet, operating panel, and conveyor belt for sale. Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is complete. Inspection possible by appointment. We accept no liability for technical information or possible errors. Video footage can be provided upon request.

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: SÇ 521 S ÜÇLÜ SU TAHLİYE MAKİNESİ YÜKSEK FREKANS MOTORLU, • Capability to mill water drainage channels in PVC and Aluminium profiles • Independent operation of three separate groups Pgedpfxsra Nrqe Anwsl • Ability to operate the drainage system in angled positions • Pneumatic profile clamping system • Fully automatic operation • High-frequency motors for more efficient and long-lasting performance (18,000 rpm) • Vibration-free and higher quality channel milling thanks to high-frequency motor

Kondisi: baik (bekas), Profile steel shear, profile shear, punch, punching machine, punch press, punching shear, punching and notching machine Pjdpfx Astxkn Uenwegl -Manufacturer: Mubea, profile steel shear punching and notching machine type HIW 600 -Punching force: 60 t -Applications: punching, shearing, cutting, notching -Throat for punching: 260 mm -Accessories: incl. punching tool, see photos -Dimensions: 1470/960/H2140 mm -Weight: 1283 kg

Kondisi: bekas, Profile steel shear, profile shear, punch, punching machine, hole punch - Pressing force: 29 tons - Punching: - Shearing: - Cutting: - Notching: - Mechanical actuation: Pgodpfxof Ek H Ue Anwol - Various punches and dies: - Length stop: - Installation dimensions: 1300/1570/H1900 mm - Transport dimensions: 1300/770/H1900 mm - Weight: 1112 kg

Kondisi: baik (bekas), Hydraulic Profile Steel Shear, Profile Shear, Punching Machine, Punch, Hole Punch, ch/b Steel Shear -Manufacturer: Mubea, hydraulic profile steel shear type HPSN 350 -Drive: hydraulic Pgsdpfjfndy Nox Anwel -Pressing force: 35 t -Equipment: large support table with stops for punching -Punching -Shearing -Cutting -Notching -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080 kg

Kondisi: bekas, Gearbox, angular gearbox, worm gearbox Pgjdpfx Ajt Snwfenwjl - Manufacturer: DZ Transmissioni, double angular gearbox - Gear ratio: i = 1:1 - Shafts: Ø 20 x 50 mm - Direction of rotation: counter-rotating, see photo - Dimensions: 410/240/H75 mm - Weight: 7.5 kg

Kondisi: sangat baik (bekas), Strapping band, plastic strapping band, packaging band, tensioning band, plastic tape, PP strapping band -Strapping band: Plastic strapping band, 8 rolls, original packaging -Type: 5 x 0.5 mm, core diameter 200 mm -Width: 5 mm -Roll dimensions: Ø 395 x 190 mm -Price/sale: as a complete set Pjdpfxowpgf Se Anwogl -Transport dimensions: 800/800/H390 mm -Total weight: 87 kg

Kondisi: baik (bekas), Tahun pembuatan: 2011, frekuensi input: 50 Hz, tegangan kontrol: 24 V, Automatic cross strapping machine Manufacturer: Mosca Model: SONIXS-TRP Pgsdpfxewk Nyne Anwel Year of manufacture: 2011 Condition: good, see photos

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 521 PVC ÜÇLÜ SU TAHLİYE MAKİNESİ, • Possibility of opening water drainage channels in PVC profiles Pgedpfera Nqtsx Anwel • Independent operation of three separate groups • Ability to operate the water drainage system in an angled position • Pneumatic profile clamping system • Fully automatic operation system

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Combination machine 4-way HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Cutting length: 2,250 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 103 / 82 mm Max. crosscut width left of the saw blade: 2,310 mm Cutting width at parallel fence: 820 mm Saw blade tilting: 90° - 45° - Planer - Working width: 300 mm Planer table length: 1,510 mm Cutterhead diameter / Number of knives: 72 mm / 3 pcs. - Thicknesser - Table dimensions: 300 x 585 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Pjdpfx Ansci Tvhjwegl Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 7,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter saw blade guard: 60 mm - Special Offer Price - Location: Ex stock 54634 Bitburg

Kondisi: sangat baik (bekas), Double-sided stand-alone machine (or 1st and/or 2nd machine in a machine line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open (Windows-based) Without transfer rail (master & slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins Pgjdpoum Untsfx Anwel "Hopper" (the panels fall directly onto the motorized chain conveyors) Cam interval (mm): 270 FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Protection cutter (pre-milling) 75.186 (1 x kW 4.4) Milling unit (2 x kW 6.6) Free position EDGE PROCESSING (for each side): Edgebanding unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 0.66) 30 m/min Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617-2 (2 x kW 0.18) Free position