Beli Pressta-Eisele Profilma 510 E-Sa bekas (71.801)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Complete saw line consisting of infeed unit, fully automatic circular saw, and outfeed unit Suitable for a wide range of applications, particularly in the photovoltaic and automotive industries. Infeed unit: Horizontal loading magazine Model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Max. material height corresponds to the saw cutting range, round stock max. diameter 130 mm 3 sliding strips between the belts for additional support Profile length: min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele Model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously variable speed control Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 control with touchscreen Reversal device with 5-fold stroke, up to max. 5,000 mm Gjdpfx Amoxvbvvo Sobn Electronic material feed 3–1,000 mm (single stroke) Cutting gap extension on both sides Pneumatic removal slide Waste flap after the saw for cut-offs / remnants Cut length depending on profile, from 8 mm Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Outfeed: Support table area 1,500 mm x 2,500 mm Pneumatic cross transfer slide

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, High-performance automatic saw / Manufacturer: PRESSTA-EISELE Gbsdow D T Uiepfx Am Son Model: Profilma 510 / Year of manufacture: 09/2008 Description: * High-performance automatic saw with fully automatic operation * Very high cutting accuracy * Short cycle times * Burr-free sawing * High reliability * Low maintenance Suitable for aluminum and plastic, ideal for cutting large quantities of small parts. Length tolerance: 0.1 mm. The saw can be viewed and tested under power by appointment. Previous application: Used for cutting corner connectors. Very well-maintained, ready-to-use condition. Technical Data: - Saw motor: 7.5 kW, S6 - Speed: 2,000 - 3,500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1,000 mm / 5-fold reversing possible - Cut-off length: from 8 mm depending on the profile - Remaining piece length: from 90 mm depending on cut-off length - Operating pressure: 6 - 8 bar - Power supply: Standard 400 V, 50 Hz - Weight: 1,750 kg - Dimensions (L/W/H): 2,700 x 1,400 x 2,300 mm Equipment: - Siemens S7 control panel - Fully automatic bar feed - Roller conveyors - Extraction unit - Chip bunker - Various accessories - CE marking No guarantee for completeness or correctness of technical specifications or equipment details. Subject to prior sale.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, vollautomatische-bedienung-saegemaschine Gedsyvtyvepfx Am Ssbn

Tahun pembuatan: 2009, Kondisi: bekas, The machine is connected to power and can be inspected by appointment! Technical Data / Machine Components: Year of manufacture: 12/2009 Make: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18–20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 t Horizontal Loading Magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, each 90 mm wide, for holding profiles, with carrier 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Max. depth: 2,380 mm, length: 7,400 mm Max. loading weight: 1,000 kg Conveying length: 1,850 mm Minimum profile length: 1,000 mm Maximum profile length: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveying speed: 4 m/min Material stop left 'Magazine empty' sensor, manual step Touch switch for initial loading 5 pneumatic cylinders for aligning profiles in the longitudinal direction 6 lifting rollers for raising the profile from the loading magazine and transferring to the pusher Pusher, electronically positionable feed system: Reinforced design Max. feed length: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Carriage plate construction with recirculating ball bearings Drive via linear motor, positioning via magnetic tape Pneumatic material gripper All 8 profiles can be automatically clamped without manual adjustment Repeat accuracy: +/- 0.15 mm Max. rapid traverse speed: 180 m/min Input of the profile tube length in the control system 1 light barrier for detecting the profile start before the first punching head Punching Unit: Hydraulic drive Punching force per cylinder: 3.0 t, designed for 55 punches per minute Maximum of 2 tools in operation Vertical punching head with 2 cylinders Punching stroke 15 mm, incl. 2 punching tools for Ø 6.5 mm holes, 65 mm pitch Punching cylinders can be individually actuated, guide for profile 2 horizontal punching heads Punching stroke 15 mm, each incl. 1 punching tool for Ø 6.5 mm hole and 1 punching tool for slotted hole 7 x 12 mm, guide for profile Cycle spray unit with 4 nozzles for punch lubrication 3 l oil tank, fill level monitoring Saw: Drive 5.5 kW, 400 V, 50 Hz Saw blade Ø 500 mm Saw feed pneumatic with hydraulic control, from below Pneumatic profile clamping device vertical and horizontal Cycle spray unit with one nozzle Flap after the saw for removal of cut-offs and residual pieces, max. length 200 mm Parts fall down into the provided container Longer residual pieces are disposed of together with good parts Dot Peen Marking System: Marking size 2 – 7 mm Marking window 80 x 20 mm, 15 characters incl. spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Gsdpjzbac Tsfx Am Sjbn Each profile can have a different designation

Tahun pembuatan: 2009, Kondisi: bekas, Aluminium cutting system with 2 saw motors, each capable of performing independent 45° cuts. Material feed unit accommodating up to 8,100 mm. Cross conveyor, discharge table, chip conveyor, and extraction unit included. Soundproof enclosure. Gbodpfjqzmnuox Am Sen Control via Siemens S7 panel. Operating manual and additional documentation available; further technical details on request. The machine was operational up to the point of dismantling. Further technical specifications available on request or see photos.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 499 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1587 / 1588, diameter mata gergaji: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw Unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with stepless speed control. Punching Unit: Features a hydraulic punching unit on the cut-off side with a punching force of 250 kN. Punching is performed vertically from above, with punch tool cassettes accommodating up to 8 profiles simultaneously. Material Feed: The material is fed via a ball screw spindle and a servomotor, with a maximum feed length of 400 mm per stroke. Control System: Modern versions are often equipped with a Siemens S7 control unit featuring a touch display for intuitive operation and precise programming. The machine is built for continuous industrial use and offers the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on equipment). Dimensions (Saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also customized financing options tailored to your needs. Whether down payment, installment plan, or individual financing models – together we will find the right solution. Upon request, we will also handle the entire transport logistics for you. From planning to reliable delivery, we ensure a smooth and on-schedule process so you don’t have to worry about a thing. 📞 Feel free to contact us for further information or a non-binding offer. We will advise you personally and professionally. Godsyyz Txopfx Am Sobn Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 450 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1589 / 1590, diameter mata gergaji: 500 mm, Fully automated sawing and punching machine for aluminum and plastic profiles The Profilma 502 ST-V combines precision sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex operations, and processing bundled materials. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Up-cut saw motion, motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round shaft guidance - Minimum offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punching unit (discharge side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2–3 seconds - Punch scrap ejection into frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) Godpfx Aeyyz Ebom Sjbn - 3 chip extraction ports Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2 × 3-liter tanks and fill level indicator - Soundproofing package: hood and saw blade guard insulated inside - Roller conveyor (740 mm) with reach-in guard on feed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety cover - Saw blade housing below tabletop Max. cutting capacity: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailored financing options designed to suit your needs. Whether down payment, installments, or individual financing models—we will find the right solution together. On request, we also handle complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process, so you do not need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, modifications, and errors!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, jam operasional: 67 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1591 / 1592, diameter mata gergaji: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic pass-through process. Based on the Profilma 502 model, it is specially optimized for high-volume applications and combined operations—including the processing of entire profile bundles. Control is via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnostics. An IXON router allows secure remote access via VPN. Up to 10 punching positions can be programmed per job. The horizontal punching unit can be deactivated as required. Saw range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Continuously variable speed adjustment - Saw cut from below, motorized feed - Material feed: 3–800 mm, reversing up to 4,000 mm - Ball screw with servo drive and round shaft guide - Offcut: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical and horizontal hydraulic punching unit (output side) with automatic oil cooler Gsdpfx Ajyyzxhom Sebn - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke continuously adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punching scrap is discharged laterally from the machine frame - Conveyor belt 250 × 800 mm for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free connection for extraction control - Minimum quantity lubrication system with two 3-liter tanks and fill-level display - Noise protection package: hood and internal blade guard sound-insulated - Roller conveyor (740 mm) with reach-in protection on feed side - Robust stationary frame, working height: 960 mm - Manually opening protective hood - Saw blade housing under the table Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available. ---- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailored financing solutions to suit your needs. Whether it's a down payment, installment plan, or custom financing models—together we'll find the right solution. On request, we can also take care of the entire transport organization. From planning to reliable delivery, we ensure smooth and timely handling so you don’t need to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We will be happy to provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Tahun pembuatan: 2004, Kondisi: bekas, de982b7c Gbodsxn Iq Dopfx Am Sen

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 1.809 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1559, diameter mata gergaji: 550 mm, panjang pemakanan sumbu X: 800 mm, panjang total: 2.400 mm, lebar total: 2.000 mm, tinggi total: 1.800 mm, Rentang pemotongan baja bulat pada 90°: 190 mm, jenis arus masuk: tiga fasa, kecepatan rotasi (maks.): 2.850 rpm, ketinggian potong (maks.): 150 mm, berat keseluruhan: 1.650 kg, panjang bagian (min.): 3 mm, panjang bagian (maks.): 4.000 mm, kecepatan mata gergaji: 2.850 rpm, tegangan masuk: 400 V, penggerak gergaji: 7.500 W, diameter pemotongan: 270 mm, lubang pisau gergaji: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm Maximum profile width 270 mm, Siemens S7 control with touch display incl. piece counter Includes CPU 315 and a Flexisoft, quantity multiplier for processing material bundles Gsdpey Dtpmjfx Am Sebn Cycle time indication in seconds, chain dimensions, includes reversing device for sections up to max. 4 m length Automatic shut-off via limit switch at the end of the material, error diagnosis, incl. IXON router for VPN connection, see data sheet Motorized saw blade feed, infinitely adjustable, vertical and horizontal clamping device from bottom to top, on both infeed and outfeed sides of the saw head, cutting gap expansion on both sides of the saw blade, electronic material feed unit, 800 mm feed length, with ball screw spindle and servomotor, including pneumatic horizontal and vertical clamping units. The profile support area in the feed section is equipped with a lift/lowerable roller, minimum remainder length from 75 mm (profile-dependent), horizontal and vertical clamping pressure reduction with 6 pressure regulators, cycle spray device with level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame lined with insulation mats on the inside 2 extraction nozzles Ø 100 mm, safety guard over the saw head and the feed unit, 740 mm roller conveyor with reach protection on the infeed side, 450 mm Pertinax table top with reach protection on the outfeed side Chip Extraction MG 3 Dust and chips are collected in a 172-liter metal container, which can be swung out for easy emptying 2 outlets with 100 mm hose adapter, without extraction hose, 3.0 kW drive, 400 V, 50 Hz, three-phase motor Max. air flow 2,600 m³/hr, negative pressure 30 mbar, with fan snail housing above the extractor Large filter area, pneumatic shaking unit for filter cleaning, filter class M, maximum noise level 80 db (A) Selector switch for continuous operation or operation controlled by the saw, without electric cable, paintwork: RAL 7035 / 9016

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, 2013 metal circular saw. This PRESSTA EISELE Profilma 400 V features a Ø400 mm saw blade diameter and a powerful motor with approx. 12 kW output. It offers automatic material feed and a pneumatic clamping system for efficient operation. If you are looking for a high-quality saw, you should consider the PRESSTA EISELE Profilma 400 V we have for sale. Please contact us for further details on this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminium and non-ferrous metal profiles Gjdpfx Asyyxxfsm Sobn • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500-5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Saw feed direction: Linear feed from top to bottom • Cutting principle: Cross-cut • Material feed: Automatic servo feed with repeat strokes for longer cut lengths • Material separation: Before saw blade retraction (no post-cutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force individually adjustable; interchangeable plastic/PVC jaws • Control: PLC-based; operation via control panel with display • Features: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostic and error messages; machine status display • Saw blade lubrication: Minimal quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor power: up to 22 kW (multi-stage motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction system (to connect to Ø100/Ø160 mm ports)

Tahun pembuatan: 2009, Kondisi: bekas, Sägeblattdurchmesser vertikal: 600 mm Sägeblattdurchmesser horizontal: 500 mm Ausklinkbreite: bei 90° Verarbeitung von Profilen bis zu 300 mm, Spitze Gehrungen bis 30° Profilhöhe max. 280 mm Ausklinktiefe: bei 90° horizontal bis 185 mm / bei 90° vertikal bis 230 mm Materialanschlag: schwenkbar 30° - 90° - 45° Materialanschlag schwenkbar mit Rastpunkten und Anzeige im Display Programmsteuerung zur automatischen Einstellung der Klinkhöhe, der Winkel sowie der Ausklinköhe Bis zu 6 Programme sind speicherbar Gjdjywtqdepfx Am Sobn Hydropneumatischer Materialvorschub über 2-Hand-Bedienung Pneumatische Materialspanner Kühlmittelschmierung

Kondisi: bekas, Tahun pembuatan: 2009, Hydraulische Arbeitsweise - Hu Gbjdpfx Aoyu Rw Ism Sjn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1015, Profile dimensions (HxW) up to 100x195 mm, 80x200 mm Automatic working cycle Drive via a 3 kW/400 V motor, 2850 rpm Saw blade: d=450x3.8x40 mm, z=110 Horizontal and vertical material clamping on the infeed side Dosing spray installation Horizontal material clamping in the feed device Retraction of both clamping jaws during return stroke (prevents profile scratching) Steplessly adjustable hydropneumatic feed for the saw blade Saw blade advances from the rear Length of cut sections adjustable within 0-300 mm (with reversing device 0-600 mm) Cutting length adjustment via handwheel with mechanical counter Maximum width of profile to be cut: 200 mm Cutting range (height x width): 100x195 mm, 80x200 mm Automatic shutdown when material is depleted Gbjdewgmv Sjpfx Am Ssn Option to connect an extraction unit

Kondisi: bekas, max-stanzkraft-100-kn Gbjdpfx Asxrmz Aom Ssn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, berat keseluruhan: 380 kg, Data teknis Ukuran alur profil: 25 – 60 mm Maks. offset ruang profil: 40 mm Badan punching yang dapat disesuaikan untuk berbagai geometri profil Sensor, pisau dan sisipan penahan dapat disesuaikan ketinggiannya secara variabel Gbodpfxjzc R Ebo Am Sen Sistem kerja pneumatik Berat mesin: sekitar 380 kg

Kondisi: baik (bekas), Tahun pembuatan: 1993, Mitre saw, saw unit right/left, double mitre saw, crosscut and mitre saw, double-end profiler -Manufacturer: Emmegi, Pressta Eisele, Double Mitre Saw Type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: swiveling 45° -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm, cutting width 160 mm Gjdpfjtxkprjx Am Ssbn -Cutting data 45°: Cutting height 260 mm, cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Tahun pembuatan: 2016, Kondisi: bekas, de-001 Gbedpfx Amoza Akws Sen

Tahun pembuatan: 1988, Kondisi: sangat baik (bekas), Installation height: Standard 140 mm Gbsdofitbwspfx Am Sjn Maximum installation height: 280 mm Table size: 450 x 300 mm Dimensions (W x D x H): 60 x 850 x 1500 mm Weight: 300 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1989, nomor mesin/kendaraan: 4867, pressta-eisele-stanzautomat-he-40-s Gedpfxey Tizke Am Sebn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8698, berat keseluruhan: 380 kg, Mesin penyambung sudut berkinerja tinggi untuk memproses profil aluminium dengan ukuran alur 25–60 mm dan pergeseran ruang profil hingga 40 mm. Badan penekan yang dapat disesuaikan serta sensor, pisau, dan sisipan penahan yang dapat disetel ketinggiannya secara kontinu memastikan penyesuaian presisi terhadap berbagai kontur profil. Gbjdjy Sptkjpfx Am Sjn

Kondisi: bekas, Tahun pembuatan: 2001, de-001 Gbedpfx Amjyu Rzts Sjn

Kondisi: bekas, Tahun pembuatan: 1998, hydropneumatische-arbeitsweise-01 Gbedpfjyrrddex Am Son

Kondisi: bekas, Tahun pembuatan: 1995, hydropneumatische-arbeitsweise-01 Gbjdpfx Ajyrrbvjm Sjn

Kondisi: bekas, Tahun pembuatan: 2011, Hydropneumatische Arbeitsweise Profilhöhe: 200 mm unter Niederhalter Max. Einstanzhöhe: 150 mm Gedpfx Amjynaluo Sebn Widerlagenhöhe: 150 mm Gewicht: ca. 400 kg