Beli Romer / Catalog Prices Kpd 3 bekas (77.871)

Tahun pembuatan: 2026, Kondisi: baru, ROMER cabins are equipped with four-inch color touchscreens. The cabin operation is intuitive and can be controlled in three modes: automatic (timer-based), automatic (triggered by a clogged filter sensor), or manual. Automatic Filter Cleaning The electronic system for automatic filter cleaning features an adjustable range for cleaning frequency and burn-off timing. Each filter is cleaned individually, and the filters can also be cleaned manually at the touch of a button. Bwodpfx Abofzkzhsveu From experience, we know that it is often difficult for operators to carry out regular filter cleaning. Thanks to this system, the operator no longer has to worry about it. Aluminum fans are very quiet, operating at 74-79 dB—which is not much. It is difficult to have a conversation, even with a standard cabin configuration. Browse through the cabin By moving the lifting rails inside the cabin, the work efficiency is improved and relieves the operator from having to move them manually.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Bwodpfxofz A Iwe Abvou Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Touch to Delete ROMER cabins are equipped with 4-inch color touchscreen controls. Cab operation is intuitive and available in three modes: automatic (temporary), automatic (via a plug-in filter sensor), or manual. Filter Plug Sensor The cabins are fitted with a sensor that monitors filter clogging and indicates when they need to be cleaned. The system also notifies the user when filters have been used. Automatic Filter Cleaning The electronic automatic filter cleaning system manages the cleaning intervals and activation times. Each filter is cleaned individually; filters can also be cleaned manually using compressed air. From experience, we know it is difficult to rely on operators to clean the filters. Thanks to this system, the operator does not need to remember or stop for cleaning. Low Noise Level Aluminum fans operate very quietly, producing only 74-79 dB, which is not excessive. Bjdpofzciqjfx Abvewu Even with the standard cabin design, it is difficult to carry on a conversation near the units. Exhaust through the cabin. The cabin’s overhead squirrel cage fans improve workflow by eliminating the need for manual push systems, preventing operators from being distracted. Explosion Protection The cabin is designed to prevent explosive mixtures from accumulating during the painting process. All components have been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor Bwedpofz I Ehefx Abvju The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: baru, Tahun pembuatan: 2020, powder-coating-booth-kpo-3-de Bwedpfxsflk Ako Abveu

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor Bodpfxjfz A Ilo Abvowu The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Tahun pembuatan: 2020, Kondisi: baru, Touch delete ROMER cabins are equipped with 4-inch color touch lights. The cabin interface is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter cartridge), or manual. Filter Cartridge Sensor The cabins are equipped with a sensor that detects filter clogging and prompts cleaning. The system also notifies when the filters have already been used. Automatic Filter Cleaning The electronic system for automatic filter cleaning controls both the cleaning intervals and the burn-off timing. Each filter is cleaned individually, and filters can also be cleaned manually using presses. From experience, we know it can be difficult to rely on the operator to clean the filters. Thanks to this system, the operator no longer needs to intervene manually. Low Noise Level Aluminum fans are very quiet, operating within a range of 74-79 dB. Even with standard cabin design, it is difficult to hold a conversation due to the quiet operation. Boilers are separated from the cabin. Bjdpofzktzsfx Abvswu Hanging “squirrel cage” design inside the cabin improves workflow, allowing painters to work without manual handling. Early booking of construction recommended. All remaining cabins are designed to prevent the rise of explosive mixtures during the painting process. Every subcomponent has been carefully selected to minimize this risk.

Kondisi: baru, Tahun pembuatan: 2026, de Bwsdpoyfim Aofx Abveu

Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes. The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters. Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash. The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed. Each tank is represented by its own unique symbol and name for intuitive operation by the user. Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle. • Control panel mounted on a swing arm for improved accessibility • PLC microprocessor control • 7'' touchscreen interface • Significantly higher number of nozzles compared to conventional systems Bwedpfx Absflmdbovou • (Optional) Possibility to dry parts after washing • Customizable advanced programming capability • Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches • Monitoring system for tight sealing and opening of the main flap • Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination • Intelligent control – prevents fluid mixing in the event of power failure or emergency stop • Fully automatic operation Pricing information is available in the catalog.

Tahun pembuatan: 2020, Kondisi: baru, ROMER® specializes in manufacturing individual technological devices for powder coating systems as well as complete, fully-automatic turnkey coating lines. ROMER® offers heating solutions for the aerospace and automotive industries, serving some of the world’s largest companies. We provide warranty and post-warranty service for all devices we sell, including a complete range of spare parts. A coating applied to a poorly pre-treated surface will peel off or corrode after a short period of time. Ensuring top-quality coating essentially starts with proper degreasing – the foundation of every paint job. Coating on inadequately degreased parts will peel off very quickly. After degreasing, the next step is to abrade the surface coating of the part, which improves paint adhesion—for example, when bending sheet metal—and to apply protective layers, such as a phosphate coating, which further enhances corrosion resistance. There are many solutions to address the aforementioned issues. But what is the most important thing in a powder coating workshop? You might think it’s the applicator, but that’s not the case; even the best applicator cannot help if your oven has poor temperature distribution. Areas where the component is overheated will cause discoloration, and in under-heated areas, the coating will not adhere properly. Above all, the oven is the most crucial aspect. Oil, gas, or electric oven? Not sure how to power your oven? Which method is more cost-effective? What does each method involve? What are the running costs? Bjdpfx Asfz A H Dobvjwu We will try to answer your questions. Depending on customer requirements, conveyor systems can be floor-mounted or suspended from rails. - For user-friendly solutions in manual systems, we recommend suspended transverse overhead conveyors (cross-transfer systems). - In automated systems, chain conveyors are most commonly used, as they operate continuously. These are an excellent solution for companies that require process quality and repeatability. - For companies producing different components simultaneously — for example, using multiple booths with different colors — flexible solutions employing power-and-free conveyors are used. This, however, is the most expensive option.

Kondisi: baru, Tahun pembuatan: 2024, de Bwedpfx Aeflpi Nobvsu

Tahun pembuatan: 2020, Kondisi: baru, Automation Use of a photoelectric sensor The use of a photoelectric sensor in the workpiece area enables you to measure the length of the workpiece and, consequently, gives you the ability to activate the spray guns when the object is within range, and to immediately switch off the guns once the workpiece has been completed. The photoelectric sensor is included as standard equipment. Identification of parts using special tags A plate with identification holes is placed over the hanger. Based on this, the PLC controller, in conjunction with the photoelectric sensor, recognizes the painted part, switches the guns on and off at the correct time, and thus reduces energy and powder consumption. Vertical detection of workpiece details By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the moment when the detail should appear in the gun zone, enabling the selective activation or deactivation of the guns. Use of light barriers with multiple sensors both horizontally and vertically This solution allows precise measurement of the workpiece dimensions, enabling adjustment of the manipulators as well. Advantages of using light barriers and photoelectric sensors The main advantages of using photoelectric sensors or light barriers are energy and powder savings. Eliminate painting in zones where there are no parts. With the use of light barriers, precise control of the guns is achieved. Our lines can optionally be equipped with photoelectric sensors or light barriers. The use of a photoelectric sensor in the workpiece area enables you to measure the length of the workpiece and, consequently, to activate the guns when the object is within their range and to immediately switch off the gun once the workpiece has been completed. Bjdpfx Absflq Spjvewu Identification of details using special tags A plate with identification holes is placed over the hanger. Based on this, the PLC controller, in conjunction with the photoelectric sensor, recognizes the painted part, switches the guns on and off at the correct time, thus saving energy and powder. By using light barriers with horizontal sensors, the PLC can analyze the vertical shape of the workpiece. The PLC calculates the time when the detail appears in the gun chamber, enabling selective activation or deactivation of the guns. Use of light barriers with multiple sensors horizontally and vertically This solution allows precise measurement of the workpiece dimensions, enabling the manipulators to be adjusted as well. The advantages of using photoelectric sensors or light barriers are primarily powder and energy savings. Eliminate painting zones where there are no parts. With the use of light barriers, precise control of the guns is achieved. Gun array vertical 8 pcs. guns Control - profiControl 10" Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 Manipulator MA1-23 x 2 pcs. Os X MX-100 x 2 pcs. Horizontal gate - Horizontal gate W400 x 2 units Vertical gate - H2000 vertical gate Maximum painting speed is 1.65714285714286 m/min 0 pcs. tug units Airflow required: 10,188 m³/h Minimum cabin passage required: B900mm H2100mm Duct diameter: 500 mm - minimum 16.9 m/s, 16 m/s Air consumption: 1210 l/min + recommended SC-20 compressor Min. St

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, daya: 6,2 kW (8,43 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, suhu: 150 °C, panjang total: 600 mm, lebar total: 950 mm, tinggi total: 2.000 mm, berat keseluruhan: 150 kg, Jumlah ruang: 1, jenis kontrol: Kontrol CNC, Perlengkapan: Penandaan CE, dokumentasi / manual, Volume tangki: 100 liter Daya pemanas: 4,5 kW. Daya blower: sekitar 0,85 – 0,95 kW. Total daya: 6,2 kW Aliran udara: 90 m³/jam. Suhu pengeringan maksimum: 150 °C. Tegangan operasi: 400 V / 50 Hz. Tinggi transportasi: hingga sekitar 3000 mm. Berat perangkat: sekitar 130 – 150 kg. Bwodpjy N T Utjfx Abvou Dimensi (L x P x T): sekitar 950 x 600 x 2000 mm Tersedia 3 unit PENURUNAN HARGA DARI 1350 MENJADI 1200 EUR per unit!

Tahun pembuatan: 2022, Kondisi: baru, Powder coating booth directly from the manufacturer Model KPO-3 Booth Type Open Working Dimensions W/H/D 2800 x 1800 x 1000 mm External Dimensions 2800 x 2300 x 1700 mm Weight 550 kg Power Supply Electric Power Output 2.2 kW Voltage 380 V Frequency 50–60 Hz Filters Polyester Exhaust Air Volume 10,200 m³/h Number of Filters 3 Filter Attachment Type Bayonet type, easy on/off Fan Noise Level 74 dBa Filter Surface Area 22.5 m² Filter Cleaning System Pneumatic – Jet Venturi Bedpfxjbuyr To Abvswu Fan Type Aluminium radial impeller, 2 pcs. Warranty: 12 months * Options available GERMAN-SPEAKING CONTACTS IN GERMANY FEEL FREE TO CONTACT US Net price Delivery time approx. 8 to 12 weeks after order Shipping costs calculated individually. Custom plants available on request – just ask us! More information at: Powder coating, electrostatic painting, peinture en poudre, thermoplastic coating, powder application booth powder coating system powder coating plant powder coating booth for powder coating surface technology powder gun powder guns curing oven powder oven industrial oven INDUSTRIAL OVEN convection curing oven powder oven Romer Deutschland GmbH

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), - BEKAS - MESIN PENGUKUR 3D Bwedpfxjzlu Tao Abveu CATATAN: LENGAN PENGUKUR 3D PORTABEL DENGAN 6 SUMBU, DIAMETER MAKSIMUM 3000 mm, DILENGKAPI DENGAN DETEKTOR SENTUH, DUDUKAN, DAN DASAR MAGNET.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, 579 MESIN PEMOTONG ROTI ARTEZEN SV 3 BEKAS - Mondial Forni, dilengkapi dengan mesin pembulat adonan. Kami menawarkan peralatan ini dalam satu set. Bwsdsz Iktxopfx Abveu DIMENSI EKSTERIOR MESIN PEMOTONG (dalam cm): - lebar 55 (82 dengan corong) - panjang 223 - tinggi 177 - lebar kanvas 29 DIMENSI EKSTERIOR MESIN PEMBULAT (dalam cm): - lebar 70 - panjang 185 - tinggi 145 SPESIFIKASI TEKNIS: - tahun produksi: 2009 - sumber daya: 3+N+T 400V 50Hz - berat adonan 80-1780 g - 1 dan 2 piston Harga yang tertera adalah harga bersih untuk satu set. Opsi tambahan berbayar tersedia: biaya pengiriman peralatan. KAMI BERBICARA DALAM BAHASA INGGRIS, JERMAN, PRANCIS, RUSIA, UKRAINA.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Dijual lini pengecatan powder coating Romer. Peralatan produksi tahun 2022, jarang digunakan. Digunakan untuk pengecatan pintu baja. Lini powder coating terdiri dari: 1. Oven (pintu di kedua sisi, 5 rel pengecatan) Bwsdpfjyzw Hwjx Abveu Model: Romer SW Dimensi interior: 3000 x 1500 x 2200 mm Oven tidak dilengkapi burner pemanas, sebelumnya menggunakan gas. Dapat dipasang burner gas maupun listrik sesuai kebutuhan. 2. Dinding penangkap cat Romer Model: Romer KPO-3ZN 3. Sistem transportasi Dimensi total: panjang 5900 mm x lebar 14000 mm, 2 trolley masing-masing 5 rel. 4. Traverse dengan roda (20 unit) Saat ini lini sudah dibongkar dan siap untuk dikirim.

Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes. The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters. Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash. The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed. Bwodpfx Ajfzq Stebvou Each tank is represented by its own unique symbol and name for intuitive operation by the user. Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle. • Control panel mounted on a swing arm for improved accessibility • PLC microprocessor control • 7'' touchscreen interface • Significantly higher number of nozzles compared to conventional systems • (Optional) Possibility to dry parts after washing • Customizable advanced programming capability • Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches • Monitoring system for tight sealing and opening of the main flap • Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination • Intelligent control – prevents fluid mixing in the event of power failure or emergency stop • Fully automatic operation Pricing information is available in the catalog.

Tahun pembuatan: 2020, Kondisi: baru, Automatic car wash systems are a solution designed to help you reduce costs, improve quality, and increase the efficiency of surface preparation processes. The automatic car wash station is equipped with a set of spray pumps. It is engineered to minimize fluid carryover between sequential process steps, reducing expenses and enhancing wash quality. This is particularly important because any apparent savings made by using systems without such solutions can result in significantly higher future costs due to increased chemical usage and waste disposal, as well as challenges in maintaining required bath parameters. Our research and development efforts have enabled us to develop a car wash system with an optional parts drying feature, utilizing hot air blown by a series of fans post-wash. The car wash station is fitted with an advanced macro-programming system, allowing users to create custom wash programs—up to 10 steps per tank—tailored to your process requirements. Program steps can be repeated or rearranged as needed. Each tank is represented by its own unique symbol and name for intuitive operation by the user. Bwjdpfxsfy T Szj Abvou Optionally, tanks can be equipped with automated bath replenishment systems, which can refill liquid either after each process stage or at the end of the cycle. • Control panel mounted on a swing arm for improved accessibility • PLC microprocessor control • 7'' touchscreen interface • Significantly higher number of nozzles compared to conventional systems • (Optional) Possibility to dry parts after washing • Customizable advanced programming capability • Advanced damper system made of acid-resistant sheet metal, double-secured with limit switches • Monitoring system for tight sealing and opening of the main flap • Dedicated pipework, nozzles, and tanks for each stage to prevent liquid cross-contamination • Intelligent control – prevents fluid mixing in the event of power failure or emergency stop • Fully automatic operation Pricing information is available in the catalog.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7525SE-0949-FA, rentang pengukuran sumbu X: 2.600 mm, jumlah sumbu: 7, RINCIAN TEKNIS Sumbu: 7 Rentang pengukuran: 2,6 m Akurasi Suhu saat pengujian: 20 °C Kelembapan udara saat pengujian: 50 % Deviasi titik tunggal yang diizinkan: 0,028 mm Deviasi titik tunggal yang terdeteksi: 0,010 mm Deviasi panjang volumetrik maksimum yang diizinkan: ± 0,039 mm Deviasi panjang volumetrik yang terdeteksi: -0,018 mm Pemindai Produsen: Hexagon Model: CMS108 Integrasi: Terkalibrasi di lengan pengukuran Catatan: Dapat digunakan pada lengan pengukuran dengan perangkat lunak pemindaian yang sesuai Catatan: Perangkat lunak pemindaian tidak termasuk dalam cakupan pengiriman RINCIAN MESIN Desain: Sistem pengukuran portabel Berat sistem pengukuran termasuk kotak transportasi: sekitar 40 kg Dimensi luar kotak transportasi lengan pengukuran: sekitar 1.350 x 550 x 350 mm Dimensi tripod: sekitar 750 x 750 x 750 mm Berat tripod: sekitar 75 kg Dimensi kotak pemindai: sekitar 600 x 450 x 220 mm Berat pemindai termasuk kotak pembawa: sekitar 6 kg Ukuran laptop: 17 inci Catatan: Lengan pengukuran diberi label ulang sebelum kalibrasi terakhir Bjdpfszv Rhusx Abvjwu PERLENGKAPAN - Lengan pengukuran Hexagon ROMER Absolute Arm RA-7525SE, 7 sumbu - Mobility Pack FP2-1503-FA dengan koneksi nirkabel ke komputer - Kotak transportasi untuk lengan pengukuran - Kaki magnet - Bilah pengujian, panjang 700 mm - Bola pengujian, diameter 25 mm - Kotak probe dengan 3 probe - Probe dengan bola rubi, diameter 6 mm - Probe dengan bola rubi, diameter 3 mm - Bola kalibrasi, diameter 15 mm - Penutup pelindung debu - Set kabel lengkap - Sertifikat kalibrasi lengan pengukuran, laptop Dell M6600 - Perangkat lunak PowerInspect 11 termasuk kunci perangkat keras (hardware dongle) - Perangkat lunak Hexagon-RDS - Tripod bergulir Brunson 231, tinggi dapat disesuaikan - Rentang penyesuaian tinggi tripod: sekitar 700 hingga 1.100 mm - Pemindai Hexagon CMS108 - Kotak pembawa untuk pemindai - Sertifikat kalibrasi pemindai Catatan: PowerInspect 11 hanya untuk pengukuran taktil, tidak dapat dipasangkan dengan pemindai Catatan untuk permintaan pengemasan: €250, palet khusus dengan konstruksi karton dan tripod di atas palet Eropa

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Bjdpfxof Aaalo Abvswu Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1393, jangkauan lengan: 2.500 mm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Termasuk laptop dan perangkat lunak PCdemis 2016! SPESIFIKASI TEKNIS Paket Mobilitas FP2: tersedia Perangkat lunak pengukuran: PCdemis (2016) Bwedpfezrd R Usx Abvou Laptop: DELL M 6800 dengan layar 17 inci dan Windows 10 Tripod: Tripod bergulir tugas berat Brunson Tipe 230 FIX Rentang pengukuran: 2.500 mm Kelas akurasi: 5 Jumlah sumbu: 6 Akurasi titik tunggal yang diinginkan: 0,020 mm Akurasi volume yang diinginkan: ±0,029 mm Berat lengan: 8 kg Set probe: Probe dengan bola rubi 3mm, 6mm, dan bola baja 15mm PERLENGKAPAN - Konstruksi dua tabung serat karbon memungkinkan pemisahan antara stabilitas dan pengukuran - Seri AbsoluteArm dapat langsung memulai pengukuran tanpa perlu melakukan kalibrasi referensi - Sistem probing dengan deteksi probe otomatis - Pelat pemasangan dengan magnet - Paket Mobilitas FP2 - Kotak transportasi - Tripod magnetik - Bilah uji L = 700 mm - Bola uji D = 25 mm - Catu daya dengan kabel penghubung - Kabel USB lengan pengukur-laptop - Penutup pelindung debu - Silinder tekanan baru telah dipasang - Pelabelan ulang lengan pengukur sebelum kalibrasi 2023 - Sertifikasi ISO 10360 dengan sertifikat 2023 disertakan Syarat Pengiriman - dari pabrik, tanpa kemasan tambahan (lengan pengukur dalam kotak dan laptop dalam sarung pelindung) dan tripod bergulir Brunson – jadi 3 bagian - jika pembeli mengatur pengambilan melalui perusahaan pengiriman, penjual merekomendasikan kemasan khusus (karton sekitar 160 x 70 x 70 cm di atas palet, dibungkus dengan gelembung udara di dalamnya) dan juga palet Eropa (tripod bergulir Brunson) dengan harga 250 €, diamankan dengan tali pengikat pada palet.

Tahun pembuatan: 2020, Kondisi: baru, • PLC Microprocessor Control • HMI Control Panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – prevents fluid mixing in the event of power failure or sudden shutdown The control box features IP54 technology User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners use sheets that protect against chemicals. The washing walls provide splash protection, and thanks to the closed chemical circuit, the process can be carried out with minimal chemical usage. Due to the small amount of refrigerant required, it is easy to heat and cheaper to purchase. Additionally, you can wash large components that cannot be cleaned in standard tanks. Filtration system Thanks to the filtration system, the chemicals operate in a closed loop; three different filters of varying thickness are used to prevent debris and grease from entering the circuit. The chemicals are stored in heated stainless steel tanks and are pumped under pressure to the lance. Washing dimensions The high-pressure cleaner allows for washing large items and optionally features a rotating platform to turn the cleaned items; components can be loaded onto it by forklift or crane. Bwedpoflpmqsfx Abveu High-pressure pumps The wash system consists of two preparation stages. Both processes have separate sets of pipes, pumps, wires, and spray guns to minimize mixing of agents during phase change. The drains have separate valves to manage liquid return. The wash system is equipped with a logic controller that manages all components. Chemicals are supplied by a highly durable, acid-resistant, multi-stage AISI304 pump (3 kW, up to 20 bar). The rinse phase uses a high-pressure piston pump with ceramic pistons (3 kW), delivering 160–200 bar.

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption. Bwedpoyg H Erofx Abveu

Kondisi: baru, Tahun pembuatan: 2025, Ovens for curing, as shown in the photos, can vary in price depending on size, configuration, and optional features. At ROMER, we produce both standard models and fully customized solutions tailored to your process needs. Simply provide us with your part dimensions, line capacity, curing profile, and available floor space, and we will recommend the optimal setup and options that deliver real improvements in daily performance. Control and Monitoring - Real-time control of temperature, time, airflow, and operating modes—featuring alarms and recipe storage for repeatable cycles. Bedpozduplsfx Abvjwu Heating Module - Rapid heat-up and stable temperature using efficient heating elements for fast energy transfer. Air Circulation - Uniform airflow ensures minimized temperature variance and consistent coating quality. Insulation and Construction - Advanced chamber design reduces heat loss for quicker setpoint achievement and lower energy consumption. Safety and Certification - Equipped with sensors, interlocks, and protective logic to maximize operational safety and reliability. High Efficiency - Optimized heat transfer and minimized losses result in tangible energy savings. Automatic Start - Programmable scheduling enables automatic preheating before shifts, streamlining production startup. Self-Latching Doors & Intelligent Chimney - Prevents unintentional opening; chimney operates only when necessary for increased safety. ECO Mode - Low-consumption standby mode cuts energy use by up to 20%, depending on the process. Inspection Window and Lighting - Enables inspection without opening the door, reducing heat loss and simplifying supervision. Guide Rails & Automatic Heat Hood - Heat hood activates only during loading to avoid temperature drop; automated rail infeed enhances ergonomics and loading speed. Multi-Zone Heating - Independent zone control for precise curing of parts with varying mass and geometry. MTS System - Heating elements installed without thermal bridges for higher efficiency and faster heat-up times. 2-in-1 Split Chamber - Movable partition provides two independent zones—allowing drying and curing in a single unit, maximizing flexibility. VFD Ventilation - Variable fan speed control based on chamber conditions for improved accuracy and reduced power consumption.