Beli Schuler Shp 35000-3150/2150 bekas (834)

Kondisi: bekas, Tahun pembuatan: 1998, Pressure 3500 t Stroke 900 mm Distance table/ram, stroke bottom 1000 mm Distance table/ram, stroke top 1900 mm Table size 3150 x 2150 mm Ram size 3150 x 2150 mm Maximum total tool weight 30.0 t Maximum upper tool weight 20.0 t Speed from 400 mm/s Working speed 0.9 – 9.2 mm/s Hydraulic operating pressure 280 bar Oil capacity 5500 l Rated current 760 A Voltage 400 V Frequency 50 Hz Drive power 425 kW Weight 231.0 t SPECIAL OFFER As is, disassembled, and stored WITHOUT commissioning / WITHOUT further work Lrodsvuukhopfx Apton Free loading onto truck Hydroforming press / IHU press / Internal high-pressure forming press Maximum preforming force approx. 1000 t Total tool weight approx. 30 t Upper tool weight approx. 20 t · Tool interface: 4 controlled axes, 3 on/off functions ram, 4 on/off functions table · Parallelism control: along the press longitudinal side · Light curtain: front and rear · Light barrier: left and right side · Ram locking in upper position · Two-hand operator panel: 1 · Independent high-pressure water hydraulic system: 2 · Max. operating pressure: 3,000 bar · Displaced volume of each pressure intensifier: 3.74 l · 2 filling pumps: volume and pressure dependent on mains supply · Location of pressure intensifier: to be determined · Main pumps: located on the press head piece/oil tank · Tool change table: 6.7 x 2.15 m · Max. tool size: 3.15 x 2.15 m · Tool clamping on ram: Hydraulic · Tool clamping on table: Mechanical · Electrical control: Schuler Multiview HF Note: This machine is an EU re-import! If the machine is to be installed and operated within the EU, it must be adapted to comply with the current EU regulations of the country of installation before commissioning. These works are not included in the offer price.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 65056, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 5.000 t, panjang langkah: 900 mm, lebar meja: 4.520 mm, panjang meja: 2.150 mm, berat keseluruhan: 319.000 kg, Perlengkapan: penghadang cahaya keselamatan, Waktu pembentukan tekanan: 3,6 dtk Waktu pelepasan tekanan: 1,5 dtk Robot industri 6-sumbu, pabrikan ABB, tipe IRB6640 M2004 Ljdpfxoxb Tpls Aptorn Deretan lemari kontrol, 12 pintu, SN 6/5056 Panel kontrol, unit hidrolik berbasis air Perangkat pergantian alat Rumah pelindung jaring dengan tirai cahaya pengaman

Kondisi: bekas, Tahun pembuatan: 1997, Press force: 1000 t Clearance between uprights: 1260 mm Stroke: 315 mm Stroke rate: 10, 21 – 42 strokes/min Distance table/ram, max. stroke up, upper adjustment: 1295 mm Table surface: 1250 x 800 mm Table height above floor: 670 mm Side opening between uprights: 830 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Ejector force in ram: 16 t Ejector stroke in ram: 23 mm Ram surface: 1250 x 800 mm Ram adjustment: 20 mm Transfer feed length: 0 – 250 mm Programmable closing path per rail: 0 – 140 mm Stroke rate of transfer unit: 42 strokes/min Drive power: 135.0 kW Weight: 120.0 t Space requirement (LxWxH): 5.9 x 4.8 x 7.95 m Height above floor: 6.95 m Height below floor: 1.0 m Equipped with: - DC drive - Pneumatic clutch - Motorized wedge adjustment of the ram - Pneumatic ram counterbalancing - Mechanical ejector in table (pneumatically actuated) - Mechanical ejector in ram - Ram locking Ljdpfx Aevuukuoptern - Tool clamping system for table and ram - Motorized circulating lubrication - Oil impulse lubrication - Grease lubrication Press control: Siemens S5 - CNC 2-axis transfer (manufacturer: Dreher, type STV-D Model 350/100-SO, year 2008), control: Siemens S7 - Cleaning unit (manufacturer: Beyss, year 1989) As is, as lies, WITHOUT commissioning, dismantled and stored Press was previously installed at the previous owner in a soundproof booth, which is NOT included in the scope of delivery A video of the press before dismantling is available

Kondisi: bekas, Tahun pembuatan: 1957, 1459342a Lrodpfx Asvzxnwepten

Kondisi: bekas, de-to-hu-it-lt-lv-nb-nl-pl-0001 Lrjdjyw Rvqspfx Apton

Kondisi: bekas, gesamtpresskraft-1200t-23062024 Lrodpfxjyw R Ads Aptsn

Kondisi: bekas, Tahun pembuatan: 1964, en-GB_Technical_details_01 Lrjdpfju Nfibex Apten

Kondisi: bekas, berat keseluruhan: 30.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 11/2007, panjang ruang muatan: 13.400 mm, lebar ruang muat: 2.500 mm, tinggi ruang muatan: 3.000 mm, Perlengkapan: ABS,

Kondisi: bekas, Sheet width: 2500 mm Sheet thickness: 1.25 mm Lrjdpfx Aecxxqcoptsn Total power requirement: 2.2 kW Space requirement approx.: 1.40 x 3.40 x 1.50 m Mechanical guillotine shear with work light, equipped with adjustable backgauge 0–520 mm

Kondisi: bekas, Tahun pembuatan: 1979, Pressure: 64 t Outreach: 315 mm Stroke: 8–100 mm Ledpfxocxxmfe Aptorn Strokes per minute: 140 spm Table size: 820 x 630 mm Table height above floor: 800 mm Ram stroke adjustable min. / max.: 8–100 mm Ram adjustment: 63 mm Total power requirement: 7.5 kW Machine weight approx.: 4.8 t Space requirements approx.: 1.45 x 1.70 x 3.10 m

Kondisi: bekas, Tahun pembuatan: 1967, Pressure: 80 t Outreach: 280 mm Stroke: 20-120 mm Lrjdpocxxrhjfx Apten Table width: 710 mm Table depth: 560 mm Ram dimensions: 560 x 355 mm Ram adjustment: 72 mm Strokes per minute: 125 spm Total power requirement: 9.5 kW Machine weight approx.: 4.4 t UVV (accident prevention regulation)

Kondisi: bekas, Tahun pembuatan: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight approx.: 3.5 t Lredpfjcxxx Hex Apton

Kondisi: bekas, Tahun pembuatan: 1997, Pressure: 40 t Throat depth: 280 mm Ram stroke: 8–120 mm Strokes per minute: 120 spm Throat depth: 280 mm Clearance: 350 mm Shut height: 270 mm Table size: 710 x 565 mm Ram area: 500 x 280 mm Total power requirement: 2.2 kW Ledpfx Ajcxxmgeptsrn Machine weight approx.: 3.2 t

Kondisi: bekas, Tahun pembuatan: 2006, Druck_250t_DE Ledpevuuhajfx Aptsrn

Kondisi: bekas, Tahun pembuatan: 1962, druck_025-de Lsdpoy Rutaofx Aptorn

Kondisi: bekas, Tahun pembuatan: 1977, 6c8ee282 Lrjdpfoylzw Hox Aptjn

Kondisi: bekas, Tahun pembuatan: 2012, trans-01 Ledpevuuk Isfx Aptsrn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Weishaupt pembakar gas G30/2-A, dengan jalur gas Dungs DN 65 Lsdsy Uvkzopfx Aptorn Tipe: ZM Kapasitas: 300–2150 kW Tekanan sambungan: 15–500 mbar Tahun pembuatan: 2001

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tehnički podaci prese: naziv: ekscentarska presa SCHULER model: PD 63 snaga prese: 63 t spoljne dimenzije prese (D x Š x V): 1800x1300x2500 mm težina prese: oko 4500 kg dimenzije stola (D x Š): 700x550 mm otvor stola (D x Š): 265x265 mm pritisna ploča (D x Š): 320x300 mm hod potiskivača: 135 mm (fiksno) maksimalna udaljenost pritisne ploče od stola: 400 mm PLC komponenta: SIEMENS SIMATIC S7-300 Lrsdpfxow R Tl Te Apten pneumatske komponente: FESTO komande: pojedinačne (nožna pedala, dvoručna ručica), kontinualne (automatski režim – podešavanje vremenskog intervala 1-99999 s i broja ponavljanja 1-32000) poseduje posebnu funkciju za određivanje donje pozicije pritisne ploče automatsko podmazivanje mašine pneumatsko pokretanje i kočenje. Napomena: u ponudi su dve identične prese (razlikuju se samo po veličini displeja – 7" i 4,3"). U slučaju kupovine obe prese, cena iznosi 9000 EUR. Tehnička dokumentacija nije dostupna. Postoji mogućnost online asistencije programera za programiranje PLC-a. Troškovi transporta su dodatni. Hitna prodaja, potreban mi je prostor za novu opremu. Cena je apsolutno fiksna, posle 1. marta prese će biti isključene sa električne mreže.

Kondisi: bekas, Tahun pembuatan: 1964, nomor mesin/kendaraan: 63/10.2995-96, gaya penekanan: 1.200 t, panjang total: 5.300 mm, lebar total: 2.690 mm, tinggi total: 9.300 mm, berat keseluruhan: 360.000 kg, Pressing Force: 1,200 t Ram Stroke: 600 mm Ram Adjustment: 500 mm Strokes per Minute: approx. 10–16 spm Shut Height: approx. 1,250 mm Drawing Mechanism: Blankholder Force: approx. 240 t Blankholder Stroke: approx. 250 mm Pneumatic Ejector in Ram: Pressure: approx. 95 t Stroke: approx. 150 mm Table Size: approx. 3,500 x 1,900 mm Heavy-duty mechanical eccentric press with robust double-column design by Schuler, suitable for industrial applications as well as classic forming and deep-drawing processes. The machine features a pressing force of 1,200 t with a fixed ram stroke of 600 mm and a ram adjustment of 500 mm. Strokes per minute are approx. 10 to 16, allowing for flexible operation based on application. The working area is outfitted with a table size of approx. 3,500 x 1,900 mm, offering ample space for medium to large dies. A highlight is the movable / traversable press table, which allows for convenient die setup and efficient tool changeover, making the machine ideally suited for use with heavy dies. The integrated drawing system (blankholder cushion) with approx. 240 t force and 250 mm stroke enables demanding deep-drawing and forming operations. Additionally, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated part removal. Maximum Shut Height: 1,250 mm Weight approx.: 360,000 kg Clamping Area of Table: 3,500 x 1,900 mm Distance between Columns: 3,600 mm Serial Number: 63/10.2995-96 Maximum Pressing Force: 1,200 t Lrodpfoy S Nhzox Aptsn Dimensions (LxWxH) approx.: 5,300 x 2,690 x 9,300 mm Year of Manufacture: 1964 Condition: Operational Terms of Payment: 100% prepayment before collection Delivery Terms: Ex Foundation Electrically Connected: Yes

Kondisi: bekas, Tahun pembuatan: 2000, nomor mesin/kendaraan: 309661, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 6.750 h, An eccentric press is being offered for sale. Make: SCHULER / Römer GmbH Type: PN 63-250 Rated force: 630 kN Ram stroke: 8-100 mm Strokes per minute: 140 spm 2-hand / foot control Separate control cabinet Used, fully functional condition. Collection by buyer; assistance with dismantling/transport can be arranged if required. Lsdpfsxvqmkex Aptorn If you are interested or have any questions, please feel free to write me a message. On-site inspection possible by appointment. Other metalworking machines available, such as bench drills, press brakes, column drills, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding machines, compressors, etc. – please see my other listings. Collection only - dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to write me a message. Additional photos and technical details available on request. All information provided without guarantee or warranty, subject to errors and prior sale. Nous parlons francais / Мы говорим по русски We speak English / Noi vorbim românește Viber / WhatsApp For an extra fee, we handle all customs and registration matters. Delivery of vehicles to the port possible at additional charge.

Kondisi: bekas, Tahun pembuatan: 1977, de-to-hu-std-001 Lrsdpjyxmulofx Aptjn

Kondisi: bekas, Tahun pembuatan: 1984, Total pressing force: 600 t Ram stroke: 762 mm Ram adjustment: 406 mm Die height (stroke down, adjustment up): 1322 mm Distance between uprights (L-R): 3700 mm Table clamping area approx.: 3350 x 2134 mm Ram clamping area approx.: 3350 x 2134 mm Cushion force in table: 180 t Cushion stroke: 305 mm Lrsdpfsuqdizex Aptjn Ejector in ram: 60 t Ejector stroke in ram: 230 mm Strokes per minute: 16 min⁻¹ Power requirement: 90 kW Approx. machine weight: 185 t Standard equipment Table cushion pneumatic Additional equipment Die change cart ABB handling robot

Kondisi: bekas, uzq4nfnhd7 Lredpfx Ajy D A Eqjptjn

Kondisi: bekas, Tahun pembuatan: 1985, AG-250TS-24HU Lrjdpjyvkukjfx Aptsn