Beli Scm Pusat Pemrosesan Untuk Jendela Dan Pintu bekas (30.948)

Kondisi: bekas, Tahun pembuatan: 2012, Integrated NC machining center for windows and doors consisting of: A) Automatic Loader Model “SP” Automatic Loader for Base SP No. 1 Moulder - Automatic loader consisting of: - Table with motorized belts - Automatic device for transferring parts from the buffer to the moulder loading area * Workpiece length min: 450 mm / max: 3200 mm * Workpiece width min: 40 mm / max: 230 mm * Workpiece thickness min: 40 mm / max: 120 mm * Work cycles: 10/min * Chain feed speed on table: 7 m/min * Loading table dimensions: 2800 x 2150 mm B) Automatic Moulder Model SUPERSET NT C 6 Position 1 = Planer spindle Position 2 = 1st right vertical spindle Position 3 = 1st left vertical spindle Position 4 = 1st top horizontal spindle Position 5 = 1st bottom horizontal spindle Position 6 = Bead recovery unit 2500 mm infeed height Feed speed: 6-36 m/min via inverter No. 1 - Motor power: 5.5 HP (4 kW) Horizontal pressure unit before the planer, pneumatically disengaged from panel Pneumatic disengagement from the control panel for the feed unit before the planer spindle Tandem infeed unit before the right vertical spindle with quick release Feed groups after the upper spindles to reduce trailing length from 620 mm to 450 mm Infeed guide with bearings for automatic feeders Electrical preparation for use of automatic loader Manual central lubrication Pump for lubricating the work table with automatic drive Facility for online integration with INTEGRA SYSTEM - Working table raised to 970 mm - Entry signal light - Piece counter Independent control panel POS. 1 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors T-SET quick tool clamping system - Allows tool locking/unlocking simply using a pneumatic gun POS. 2 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Vertical spindle with 180 mm working length T-SET quick tool clamping system Electronic vertical positioning POS. 3 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors High-precision spindle Vertical spindle with 180 mm working length T-SET quick tool clamping system Electronic horizontal positioning POS. 4 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Spindle speed: 8,300 rpm T-SET quick tool clamping system Electronic vertical positioning POS. 5 High-precision spindle 10 HP (7.5 kW) motor instead of 5.5 HP (4 kW) Brake for 5.5 HP (4 kW) to 10 HP (7.5 kW) motors Spindle speed: 8,300 rpm T-SET quick tool clamping system Lsdpfx Aajixxwmj Ujrl POS. 6 Bead recovery unit Includes: PRL allows automatic transition from planning to bead recovery and vice versa. - Working group with 30 mm spindle diameter, length 30 mm - Electronic horizontal positioning - Electronic vertical positioning - Hardware and PLC modifications for axis management - Tandem output and modifications.

Kondisi: baru, Maximum workpiece length: 3,800 mm Milling spindle: 1 piece Main motor: 15 kW Controller: Maestro active windoor Windor NT 1 ANGULAR MACHINING CENTER FOR WINDOW AND DOOR PRODUCTION --- Manufacturer’s Short Description: Windor NT1 is the angular machining center for the production of windows and doors. Despite its compact dimensions, it is capable of performing all processing steps such as cross-cutting, tenoning, boring, milling, and profiling. It operates completely independently of design concept, joint type, cross-section, etc. --- Technical Manufacturer Description: Position "1": Cross-Cut Saw Unit Features: Ljdpfx Aaoy T R S Rj Uerl - Motor power: 4 kW (5.5 HP) - Speed: 3,000 rpm - Max. tool diameter: 400 mm - Saw blade bore: 80 mm / Flange diameter: 100 mm - Pneumatic vertical positioning ON/OFF - 1 extraction port, diameter: 160 mm Position "2": Tenoning and Slotting Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 3,500 rpm - Max. tool diameter: 320 mm - Max. tenon depth: 105 mm - Axial stroke below table: +15/-300 mm - Automatic anti-splinter device "Jolly" - Maximum tenon angle: ± 60° - Vertical positioning through M.C. brushless motors - Left-hand rotation - 1 extraction port, diameter: 200 mm Position "3": Profile Milling Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 6,000 rpm - Min./max. tool diameter: 130-240 mm - Axial stroke below table: +15/-300 mm - Vertical positioning through M.C. brushless motors - Pneumatic horizontal positioning ON/OFF with 5-position turret stop (standard, if option 99.06.62 is not installed) - Right-/left-hand rotation - Climb cutting function for anti-splinter protection during rebating Position "4": Profile Milling Unit Features: - Heavy-duty spindle, diameter: 50x320 mm - Motor power: 7.5 kW (10 HP) - Speed: 6,000 rpm - Min./max. tool diameter: 130-240 mm - Axial stroke below table: +15/-300 mm - Vertical positioning through M.C. brushless motors - Pneumatic horizontal positioning ON/OFF with 5-position turret stop (standard, if option 99.06.62 is not installed) Position "5": "DUO" Unit Shadow groove unit complete with: - Spindle diameter: 50 mm - Spindle length: 3 mm - Speed: 9,000 rpm - Tool diameter: 154 mm Unit for glazing bead cutting and/or hardware milling with: - Spindle diameter: 30 mm - Spindle length: 35 mm - Speed: 6,000 rpm - Max. tool diameter: – Saw blade for glazing bead cutting: 200 mm – Tool for hardware milling: 240 mm Common features: - Pneumatic angle rotation with 2 positions: 0°-90° - Pneumatic in/out of operation ON/OFF with 5-position turret stop - Manually operated axial positioning - 1 extraction port, diameter: 160 mm --- Maestro active windoor The machine control is organized on two levels. The first level comprises an industrial numerical control from BECKHOFF, which executes all SPS control functions. The second level is an industrial PC, the "eye-M evo" console, which serves as the interface between operator and machine.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, SPESIFIKASI LINI Mesin Las 4 Kepala FUSION 4H Unit pelepasan bingkai Modul frais pertama Q-MATIC 1 Koneksi serial antara mesin las dan pembersih Lrjdpfx Aajy S E E Ns Usl Meja pemutar Mesin pembersih elektronik TRIMMER 4A Meja ekstraksi Modul frais kedua Q-MATIC 2 Laptop pengawas lini Unit pemotong sisa Unit pelepasan bingkai otomatis

Kondisi: bekas, Tahun pembuatan: 1998, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 83406, Pusat pemrosesan jendela Weinig Unicontrol 10, tahun pembuatan 1998 Lodpfx Ajy Sxlpja Ujrl

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, The Nanxing ND712D is a state-of-the-art 6-sided CNC drilling machine, equipped with two independent workstations, allowing for the simultaneous processing of two panels and doubling productivity. The machine is designed for furniture manufacturers seeking speed, precision, and reliability in a compact footprint. Highlights: - 2 independent workstations (1200 + 650 mm), each with its own computer and dedicated processing units. - Optimized drilling blocks: up to 19 vertical drills plus horizontal drills on X and Y axes. - 4 main spindles (2 upper, 2 lower) with power up to 5.5 kW and 18,000 rpm. - Air cushion tables for panel handling without scratches. - Automatic dimension detector with alarm and compensation for panels. - Servo-driven clamps and automatic lateral alignment system for maximum accuracy. - Advanced software + SYNTEC CNC control with user-friendly interface and support for MPR, DXF, BPP, PDX, XML files. - Barcode reader for integration into automated production flows. - High safety: side sensors, emergency stop, cable protection. Lredpexcwmqefx Aa Usl Technical data: - Panel dimensions: Length 200–3000 mm / width 30–650 mm / thickness 10–60 mm - Max. traversing speed: X/U – 135 m/min, Y – 75 m/min, Z – 30 m/min - Total installed power: 43.8 kW - Weight: 6,300 kg - Machine dimensions: 6620 × 4620 × 2378 mm - Power supply: 380V / 50Hz / 3 phases Fields of application: - Medium and large series furniture production - Panel processing for kitchen cabinets, wardrobes, bathroom and office furniture - Complete 6-sided drilling + light milling in a single clamping User benefits: - High productivity: processes two panels simultaneously - Error reduction: automatic dimension detection and precise positioning - Integration into smart manufacturing lines: barcode reader, compatible with ERP/CAD-CAM software - Optimal cost / maximum efficiency: one machine equals two drilling machines

Kondisi: bekas, Tahun pembuatan: 2009, Maximum workpiece length: 4,500 mm Milling spindle: 1 unit Main motor: 20 kW Control: Siemens Weinig Conturex 2 C 114 ----- Working width: 40–260 mm Working height: 25–110 mm 2 x PowerGrip clamping table, 2 x 2,280 mm ----- Workpiece length: 200–4,500 mm Machining of workpieces over 2,700 mm in length is carried out via a follow-on/secondary cycle. Main spindle 1: ----- Motor with brake: 20 kW HSK 63F Speed electronically adjustable: 2,000–18,000 rpm Max. tool length from reference plane HSK 63 F: 290 mm With C-axis Tool magazine: ----- Number of positions: 30 Slot pitch: 100 mm Multi-spindle drilling head, permanently installed ----- For horizontal and vertical drilling and milling operations without tool change ----- Price ex location Prices for dismantling and loading onto customer’s truck, domestic and international transport, reassembly, commissioning, and, if required, engineering of new profiles upon request! Including used tools (drawings available on request!): Lrsdpfxewunwyo Aa Uel ----- Wood: IV 68, 78, 88, inward and outward opening, with attached weather bar Wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 Lift-slide doors IV 68 and 78 Entrance doors IV 68 and 78 Pivot windows Corner connection: counter/dowel Technical data according to manufacturer—no guarantee! Detailed technical description available on request!

Kondisi: bekas, Tahun pembuatan: 2024, jam operasional: 607 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9917348, kecepatan spindel (maks.): 24.000 rpm, panjang pemakanan sumbu X: 4.000 mm, panjang umpan sumbu Y: 200 mm, panjang umpan sumbu Z: 300 mm, daya: 8,5 kW (11,56 hp), gerak cepat sumbu X: 140 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, kecepatan rotasi (maks.): 3.600 rpm, jarak pergerakan sumbu X: 4.225 mm, jarak lintasan sumbu Y: 530 mm, jarak gerak sumbu Z: 410 mm, jenis arus masuk: tiga fasa, Perlengkapan: Port USB, kecepatan rotasi dapat diubah tanpa batas, Kami menawarkan pusat pemesinan kami untuk dijual. Peralatan dalam kondisi sangat baik dengan jam kerja sangat rendah; praktis masih baru. Pusat ini sudah lengkap dengan semua yang diperlukan dan dilengkapi dengan berbagai aksesori. Alasan penjualan: untuk meningkatkan fasilitas produksi kami sendiri. Lrjdpfx Aoy Su Hpea Usl

Kondisi: bekas, Dijual mesin beserta semua alat seperti terlihat pada foto. Lrsdpfx Asy Rumtsa Ujl

Kondisi: bekas, Tahun pembuatan: 2020, Max. workpiece length 6360 mm Milling spindle: 1 unit Main motor: 13 kW CNC control SCM CNC machining center ACCORD 40 FX for windows and doors ----- INCLUDES extensive window and door tooling among others (window profiling on request!): Wooden windows IV 68, 78, 92 Wooden windows "classic style" Wood-aluminum windows Front doors Lift-slide doors Box-type windows Machine can still be inspected in operation! Technical summary (detailed description available on request!): ----- - Working area X-Y= 6360x1905 Z=350 - Automatic table with 8 carrier rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP setting - self-calibration system for Prisma machining unit - Chip removal device on the electrospindle, adjustable - Prepared for right-angle head "Prisma T-S" - BRC machining unit: saw blade for end machining, 1 port for cutter, vertical 3 vertical, independent drilling heads, center distance 32 mm 3 vertical drilling heads (not independent), center distance 21.5 mm, for lock hole drilling 4 horizontal drilling heads (2 per side, not independent), center distance 21.5 mm Lrjdpfxjy Hl Iye Aa Ujl 2 horizontal milling heads (1 per side) - TRC 48 - rear tool magazine 48 tool positions (tool holders excluded) Center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total magazine load: 250 kg - MACH 5 - quick-change device: enables tool change on the electrospindle in just a few seconds. - Pendulum operation - Automatic axis lubrication - eye-M operator console with integrated PC - Additional fixed control panel - TECPAD - remote control for machine functions - Clamp jaw preparation H145 for worktable with 8 carrier rails - Front stop row H110 for worktable with 8 carrier rails - Rear stop row H110 for worktable with 8 carrier rails - Suction cup H110 145x145 mm - Suction cup H110 145x55 mm, rotatable - Suction cup H110 180x65 mm, rotatable - First side stop row H145 for worktable with 8 carrier rails - Second side stop row H145 for worktable with 8 carrier rails - Clamps H145 with round base - Clamps H145 with square base - No. 6 double-stroke lifting devices H145 - Laser and reference stop H145 for arches (left side) - PRO-SPEED safety system - Maestro cnc - user and programming interface - Maestro pro view – simulation software Sale of tools in the condition, scope, and with accessories as available in our warehouse. Note regarding window profiling, tool drawings, tool system listings: Engelfried GmbH assumes no liability that the tools actually available correspond with the mentioned and illustrated systems. (technical data according to the manufacturer – subject to verification!)

Kondisi: baik (bekas), 0321-SCM-MULTIFLEXC-EN-DE Lrsdpsytn U Ijfx Aa Usl

Kondisi: bekas, Tahun pembuatan: 2020, Maximum workpiece length: 3740 mm Milling spindle: 1 unit Main motor: 15 kW Control system: CNC Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of client ----- - From a timber window manufacturing operation. - Machine still connected and ready for demonstration - Sold without machining tools Technical Description (Summary, see PDF for full details): ----- Working dimensions: X = 3,740 mm Lsdpfxjyq Szto Aa Ujrl Y = 1,570 mm Z = 350 mm clearance height (from console level), depends on clamping system, see layout. Travel distances: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speeds: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 – 24,000 rpm - Additional locking system for the C-axis - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in X direction, 5 spindles in Y direction, grooving saw in X direction) Horizontal drilling unit with 6 spindles, 4 spindles in X direction and 2 spindles in Y direction. 1 grooving saw in X direction, max. diameter 120 mm - Disc tool changer with 24 tool positions on the right of the machine frame Max. tool diameter 240 mm Max. tool height 370 mm - Tool change station for circular saw blade mounted on the cantilever/tool changer, Max. saw blade diameter 350 mm - Tool changer on the left of the machine frame with 10 tool positions. Max. tool diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - Disc tool changer with 24 tool positions mounted on the cantilever, travelling in the X direction Max. tool diameter 240 mm Max. tool height 370 mm - Moving pick-up position for chip deflector - 6 workpiece supports, s-motion, position controlled - 2 machining fields for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved element machining - Includes all existing solid wood clamps and vacuum suction pads - Automatic central lubrication - CE safety equipment - “WoodFLash” software Lamello Clamex P Macro Cut-out Macro - “Greenline package” for reduced energy consumption ----- Price for the above machine on request! ----- Optional new Oppold tool set for H500: -Windows Timber windows IV 68, 78, and 88 inward-opening, with changeable rebate at the sides and top. Glass rebate 20 mm, frame and sash side 20° beveled with loose and pre-machined glazing bead Old building timber windows IV 68, 78, and 88 inward-opening, without rain rail, with changeable rebate at the sides, top, and bottom. Glass rebate 20 mm, frame & sash side 15° beveled Removable weather board Timber-aluminium window (System supplier: Gutmann Mira, bevel rebate system) HA IV 68, 78, and 88, inward-opening, 2 sash variants: square and bevelled, Changeable rebate at the bottom, sides, and top -Entrance door Timber HTIV 68, 78, and 88 with single rebate in the frame and double rebate in the sash inward-opening, 1 sash variant, glass rebate, without changeable rebate Offset construction Timber-aluminium IV 68, 78, and 88 with single rebate in the frame and double rebate in the sash -Lift and slide door Timber HS IV 68, 78, and 88, without frame production Timber-aluminium HS IV 68, 78, and 88, without frame production Execution...

Kondisi: bekas, Tahun pembuatan: 1993, Peralatan IV 68, 78 dan perlindungan bangunan bersejarah. Spindel bor dan slot untuk 3 alat, motor 7,5 kW. Spindel profil untuk 3 alat, motor 5,5 kW. Lrsdpjy Hrrxjfx Aa Uol

Kondisi: bekas, Tahun pembuatan: 2006, nomor mesin/kendaraan: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of manufacture: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Ljdpfoyu Sn Usx Aa Ujrl Current capacity: 160 A Power: 61 kW If you have any questions or require additional information, please contact us by message or phone. CNC machining center for processing wooden profiles (windows, doors, etc.). Additional linear tool magazine (120 positions). 2 four-axis working heads for simultaneous machining (20 kW each). Automatic loading and unloading tables. Optionally, it is possible to purchase an extensive tool package (tool holders, angle aggregates, profile heads). Machine currently in continuous operation. Machine purchased in 2024 after a complete overhaul. Since then, it has been operating for 15 months on a single shift. Technical data: Working ranges: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The maximum working length is achieved by repositioning the element multiple times in the clamp. Milling spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Rotation directions: right/left C axis: yes Feed speeds: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Magazine for milling spindle no. 1: - magazine type: disk-type - magazine capacity: 18 tools - holder spacing: 100 mm - max weight of single tool: 10 kg - max total weight of tools: 130 kg - tool holder type: HSK F 63 Milling spindle no. 2: Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Rotation directions: right/left C axis: yes Feed speeds: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Magazine for milling spindle no. 2: - magazine type: disk-type - magazine capacity: 18 tools - holder spacing: 100 mm - max weight of single tool: 10 kg - max total weight of tools: 130 kg - tool holder type: HSK F 63 External tool magazine: - magazine type: linear - capacity: 120 tools - holder spacing: 80 mm - tool holder type: HSK F 63 Loading table: cross automatic Unloading table: cross automatic CNC control system: PLC control: Siemens S7 Mobile control panel. Supervisory computer: - operating system: Microsoft Windows - modem for data transfer and diagnostics - touch screen Siemens Sinumerik 840 D Number of axes: 4 Machine fully operational, currently in continuous production. For an additional fee, it is possible to purchase extensive equipment: 8 angle aggregates, set of 3 standard tool holders, set of 17 new spindles for heads.

Kondisi: baru, Tahun pembuatan: 2026, Maximum workpiece length 4400 mm Milling spindle 1 unit Main motor 19.2 kW Control Beckhoff CNC machining center MASTERWOOD 4 WIN ----- Specifically designed for efficient and flexible production of wooden windows and doors HIGHLIGHTS: - Various tool magazines for optimal tool configuration - Simultaneous loading of 4 workpieces - Patented clamping system for optimal processing of workpieces - CNC-controlled work table with automatic positioning of beams and clamps - Automatic reclamping for switching between exterior and interior profiling - INTEGRATED window manufacturing software, meaning the machine does not have to (but can, of course) be operated from the office with external industry software - Powerful 19.2 kW HSK-63 E motor Please note that this stock machine is located with us in Oberkochen and is already equipped with many useful options. Tools available at short notice upon request! Request a quote and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available on request! Lrodpfxsyyqm Ue Aa Uel Enclosed you will find the technical description of the machine as a PDF document. We would also be pleased to take your used machine in part exchange at a fair price! Suitable stationary or mobile extraction systems available on request (see e.g. #5674 NESTRO NE 300) Suitable compressor available on request (#5997 Kaeser Aircenter SM 15) (Technical data as per manufacturer – subject to change!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Pusat Pemrosesan CNC – untuk furnitur dan pintu FORMAT Tipe: Profit 3 Tahun pembuatan: 2006 4 sumbu Lrjdpfjw T U Axox Aa Uel Ekstra: 1) Unit rumah kunci 2) Unit gergaji 90° KONDISI SANGAT BAGUS !!!

Kondisi: sangat baik (bekas), WEINIG Window Production Line, Unicontrol 6, S/N 035-823, Year 1997 - Crosscut saw, pneumatically indexed (3 kW) with laser guide light - Grooving spindle 50 x 320 mm for 4 tools of 80 mm each – motor 11 kW - Parallel spindle 50 x 120 mm – motor 7.5 kW - Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each – motor 11 kW - Fitting spindle, pneumatically indexed 40 x 160 mm – motor 3 kW Lsdpfjy Dud Eox Aa Usrl - Sawing / grooving spindle, horizontal top, pneumatically indexed – motor 3 kW - Feed speed adjustable from 6 to 12 m/min – motor 1.1 kW - Screen control for 99 window types - Support bar for sash bar production, pneumatically indexed - Picture window unit with digital angle display - Length stop up to approx. 3,500 mm - Perimeter milling device with support rail - Return conveyor to operator side - Machine complete with operating manuals, circuit diagrams, spare parts lists LEITZ Tooling Set, IV-78 THE MACHINE IS IN VERY GOOD TECHNICAL AND VISUAL CONDITION Delivery: EXW Delivery time: short-term by arrangement Inspection: by appointment Payment: upon notification of readiness for dispatch Errors and prior sale excepted.

Kondisi: baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Ruchser troli transport daun dengan pelindung kain, 15 kompartemen masing-masing lebar 110 mm, lebar: 900 mm, tinggi: 2400 mm, panjang: 2200 mm Ledpfsy Dfwijx Aa Ujrl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Winkelbearbeitungsanlage Lsdpfx Asxn T Smea Uerl

Tahun pembuatan: 2002, Kondisi: perlu perbaikan (bekas), Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 1300030418, Dijual: pusat pemrosesan CNC untuk profil aluminium dan baja Elumatec SBZ 130. Mesin ini milik perusahaan dan berada di area produksi tertutup, terlindungi dari pengaruh luar. Spesifikasi dan kondisi: Tahun pembuatan: 2002. Lrjdpfx Aeyz Dvroa Usl Status: Saat ini tidak dalam kondisi operasional (memerlukan servis pneumatik). Riwayat: Mesin digunakan secara aktif hingga tahun 2014, kemudian disimpan di dalam gudang. Elektronik: Komputer kontrol berfungsi penuh, mesin dapat dinyalakan untuk pemeriksaan sistem. Investasi yang diperlukan: Penggantian seluruh selang pneumatik dan pemeriksaan/servis blok kontrol. Kelebihan: Mesin dalam kondisi mekanis yang baik dan tidak pernah disimpan di luar ruangan. Merupakan peluang ideal untuk perusahaan dengan kapasitas teknis untuk peremajaan atau membutuhkan basis yang andal untuk modernisasi.

Kondisi: baru, de-hu-it-lt Lsdpfxeyrtyye Aa Ujrl

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, hentian panjang: 3.200 mm, diameter alat: 400 mm, diameter spindel: 50 mm, langkah spindel: 640 mm, kecepatan spindel (maks.): 3.000 rpm, panjang spindle milling: 320 mm, diameter mata gergaji: 400 mm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: AC (pendingin udara), tinggi kerja: 130 mm, lebar kerja: 200 mm, SCM Windor 60/100 – Angle Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* Lrjdpfxox Nqqxs Aa Usl 1. General Description of the System The subject system is a window and door production line, type Windor 60/100 by SCM Group, year of manufacture 2005. This is a CNC-controlled angle processing centre for industrial machining of frame and sash components. The system is designed for series production and enables precise, repeatable processing in integrated process steps. 2. Main Components of the System 2.1 Angle Processing Centre SCM Windor 60/100 The SCM Windor 60/100 is of modular construction and designed as an angle machining unit. Machining is carried out on a tenoning side and a profiling side, arranged at right angles to each other. The system combines several machining steps such as milling, drilling, grooving, rebating, and tenoning in a continuous, CNC-controlled process. Key features: * CNC multi-sided machining * Several milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the production line and provides precise drilling operations for joints and fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile-forming milling operations and consists of two machining sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour machining Left side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling 2.4 Löwer Wide-Belt Sander A wide-belt sander from Löwer is integrated into the production line. The machine is solely used for surface sanding to improve the surface quality of the processed components. 3. Control, Operation, and Safety The system is equipped with CNC control, managing all machining operations, tool changes, as well as feed and spindle movements. Operation is semi-automated or fully automated by trained personnel. The safety equipment corresponds to the state of the art at the time of installation (year of manufacture 2005) and includes in particular: * Mechanical safety devices and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL Planer (10-spindle) To expand the existing machinery, the installation of an SCM Topset XL planer with 10 spindles is planned. The machine will be operated as an independent processing station at a separate location within the production hall and will not be integrated into the Windor system’s CNC control. The system is available and can be dismantled at any time. Dismantling and transport must be organised by the purchaser. Available from: 07/01/2026

Tahun pembuatan: 2013, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M284 2013.5.2, For sale is a Steinhauer eCAB WorkCenter CNC machining center, manufactured in 2014, in very well-maintained and fully functional condition. The last maintenance was performed on 13.08.2024. The machine is immediately ready for operation. The eCAB WorkCenter was specifically developed for professional switchgear cabinet construction and is ideally suited for automated processing of mounting plates, doors, side panels, and other enclosure components. It enables precise drilling, milling, and thread cutting of parts made from steel, stainless steel, aluminum, and plastic. Machining is CAD-supported via CNC control with high repeat accuracy – optimal for both single-part and series production. Technical highlights: Lrodpjymw Hajfx Aa Uol - CNC machining center designed specifically for switchgear cabinet construction - Automated processing of mounting plates, doors, and enclosure components - Suitable for steel, stainless steel, aluminum, and plastic - High precision and repeatability - User-friendly CNC control / software Machine data: Manufacturer: Steinhauer Model: eCAB WorkCenter Year of manufacture: 2014 Last maintenance: 13.08.2024 Condition & Service: - Very well maintained, fully functional - No known technical defects - Inspection and test run possible by appointment Scope of delivery: - eCAB WorkCenter incl. control unit - Accessories / tool holders - Documentation / computer incl. software

Kondisi: bekas, Tahun pembuatan: 2004, Manufacturer: KOCH Model: Windoor 410 Year of manufacture: 2004 Machine Description / Technical Data Machining center for window and entrance door elements Manufacturer: KOCH Model: Windoor 410 Year: 2004 Processing operations: - Hinge drilling (sashes) - Strike plate marking drillings - Mounting hole drilling (frames) - Strike plate milling - Strike plate milling (4 mm rebate clearance) Workpiece dimensions: Workpiece length: 300 – 4,500 mm Workpiece width: 20 – 240 mm Workpiece thickness: 20 – 150 mm The machine is equipped with 2 working zones. Max. machining length with 2 working zones: 1,100 mm Max. machining length with 1 working zone: 2,500 mm Machining units: a) Horizontal drilling unit with 1 spindle fixed at a 7 degree angle b) Horizontal drilling head with 3 individually selectable drilling spindles c) Horizontal milling unit for lock cases, strike plate milling d) Vertical milling unit for profile change milling, strike plate milling e) Vertical drilling unit with 5 individually selectable drilling spindles f) Glue application and dowel insertion station, dowel size 8 x 60 mm Connection data: Electrical connection: 400 V, 50 Hz, 3-phase Voltage fluctuations: max. +6% to -10% Ledpfxewrnh Hj Aa Uerl Immediately available

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1988, Mesin pembuat jendela Pabrikan: Okoma Tipe: UF1 S Tahun: 1988 dengan alat Lrsdpfxeyk Haqj Aa Usl

Kondisi: bekas, Used CE-compliant SAOMAD window and door production centre Comprising: Tenoning machine SE 3 A, year 2005 Complete with: - End trimming unit Motor power: 3 kW Blade diameter: 400 mm - Tenoning unit Motor power: 9.2 kW Shaft length: 320 mm Maximum tool diameter: 350 mm Profiling machine PS1ASX, year 2005 Complete with: - No. 2 profiling spindles Motor power: 7.5 kW each Shaft length: 320 mm Maximum tool diameter: 240 mm Ljdpfxowrb Tvj Aa Usrl - Hardware radiusing unit Motor power: 2.2 kW - Strip recovery unit Motor power: 2.2 kW Maximum tool diameter: 200 mm - Hardware group Motor power: 3 kW Maximum tool diameter: 180 mm - No. 1 left profiling spindle Motor power: 7.5 kW Shaft length: 320 mm Piece return system