Beli Unit Sekrup Stasioner, Stasiun Sekrup bekas (39.554)

Kondisi: baik (bekas), WSM stationary screwdriving unit, screwdriving station Assembly of components for car radios and navigation systems, as well as testing of the same. The assembly station is surrounded by a safety enclosure. The service doors are equipped with safety interlock switches. In automatic mode, the doors are locked and can only be opened after an automatic stop or in manual mode by pressing the 'Doors' button on the control panel. When a door is open, automatic operation cannot be started. Process sequence: The station is loaded with the pre-assembled module via the transfer belt. The following are the work steps of the automatic station during one WT cycle. Under normal operation, all three stations work in parallel. - Positioning of the WT with the pre-assembled module in station 2.1 - Lowering the carrier with scanner and vision sensor - Scanning of the three codes (front panel, front PCB, SD PCB), comparison with database - Checking the correct engagement of the FFC in the connector - Raising the carrier and lowering the WT onto the belt - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the belt - Positioning the WT with the pre-assembled module in station 2.3 - Lowering the light protection cover and contacting, moving in the carrier with the test sensors from below - Type-specific testing of the illumination of SD + CD slots and push buttons - Functional test of CD eject button - Lowering the WT onto the belt > process continues Gbjdsibichopfx Algsn If errors occur during testing, these are displayed and can be corrected if possible. For this, switch to manual mode and open the doors. After the repair, restart the automatic mode; the WT will be retested in the station. If repair is not possible (e.g., screwdriving error), the WT will be marked as NIO (not OK) in the control system and will not be further processed. Manual NIO marking and removal are also possible. Financing through our partner bank is also possible. komplett-konzept.leasingo.de More assembly stations, both new and used, can be found in our shop! International shipping costs available upon request!

Tahun pembuatan: 1988, Kondisi: baik (bekas), 18 stations Gbedpfobh H T Iex Algsn Shaft diameter: 89 mm Strip width: 600 mm Strip thickness: 3 mm

Kondisi: baru, Tahun pembuatan: 2008, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1753, berat keseluruhan: 450 kg, tekanan kerja: 250 batang, panjang total: 1.420 mm, tinggi total: 1.420 mm, jenis arus masuk: tiga fasa, lebar total: 900 mm, kapasitas tangki: 160 l, tegangan masuk: 380 V, kapasitas pompa: 65 l/menit, kecepatan rotasi (min.): 1.500 rpm, kecepatan rotasi (maks.): 1.500 rpm, daya: 18,5 kW (25,15 hp), tekanan pengiriman: 250 batang, berat kosong: 450 kg, Lokasi: Fohnsdorf, Austria Tersedia segera Gedpfx Alelhqdmsgjbn

Kondisi: bekas, Acrison sekrup pengumpan, unit dosis, feeder Gedsy Iciwjpfx Algsbn Feeder seluruhnya terbuat dari stainless steel Dilengkapi dengan mekanisme pencampur Diameter sekrup 80mm Daya motor 0,75kW Lihat iklan kami yang lain

Kondisi: sangat baik (bekas), Complete screw cylinder with screw, cylinder head, and shut-off nozzle for Engel injection unit size ES3550 Gsdjfnqapspfx Algobn

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 1 h, nomor mesin/kendaraan: MA0145_1375, AC2025-DE-01 Godpfx Aoh Ey N Uslgobn

Kondisi: bekas, Tahun pembuatan: 1994, nomor mesin/kendaraan: 940114747, Falzwerk 2. Station Eigensteuerung / Folding Unit 2nd Station Self-Control MBO T79-2-81/4, Year of manufacture: 1994, Serial No.: 940114747 4-pocket folding unit Maximum working width: 460 mm Gbedpfx Alsilx Srogsn Self-Control system Rear-mounted slitter shaft Online video inspection via Skype video available. We would be pleased to welcome you for a visit – further machines in stock. Available immediately – inspection possible. Located at our warehouse in Emskirchen / Nuremberg – test runs possible.

Kondisi: bekas, Tahun pembuatan: 1994, nomor mesin/kendaraan: 940114747, Falzwerk 3. Station Eigensteuerung / Folding Unit 3rd Station SelfControl MBO T79-3-46/2 Gbodpfx Aljilx Snogsn Year of Manufacture: 1994 - Serial No. 940114747 2-Pocket Folding Unit Maximum Working Width: 460 mm Independent Control System Rear-Mounted Slitter Shaft Online video inspection via Skype video available We would be pleased to welcome your visit – more machines in stock Available immediately – inspections possible Located in Emskirchen / Nuremberg – machine can be tested

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas),

Tahun pembuatan: 2025, Kondisi: baru, Screw dosing unit for powders. Dosing via rotating auger screw. - Specifications: Filling range: 5-3000g; Hopper capacity: 50 liters; Hopper with side opening; Stainless steel 304 construction; Power supply: 220~415V; Power consumption: 1.4kW. Please note that our new prices are often below the usual prices for used equipment. Feel free to contact us and let us know your specific packaging requirements. - We generally have 30-50 different new machines available from stock for immediate delivery. For customer-specific machines, we offer very short lead times starting from approximately 3 weeks. - All machines come with a full warranty. Gbsdov Nnmrjpfx Algjn

Kondisi: baru, Tahun pembuatan: 2025, Screw dosing unit for powders. Dosing is performed via a rotating screw auger. - Specifications: Filling range: 500–10,000 g; Filling hopper capacity: 100 litres; Hopper with side opening; Stainless steel 304 construction; Power supply: 220~415 V; Power consumption: 2.75 kW. Please note that our new prices are often below the usual prices for used equipment. Don’t hesitate to contact us and let us know your packaging requirements. - We usually have 30–50 different new machines available from stock at any given time. For machines made to customer specifications, we offer very short delivery times starting at approximately 3 weeks. - All machines are available with a full warranty. Gsdsv Nnm Ejpfx Algjbn

Kondisi: baru, Tahun pembuatan: 2025, Screw dosing unit for powders. Dosing is performed via a rotating screw spindle. - Specifications: Filling range: 5-1000g; Hopper capacity: 30 liters; Hopper with side opening; Constructed in stainless steel 304; Power supply: 220~415V; Power consumption: 1.4kW. Please note that our new prices are often below the usual used equipment prices. Feel free to make an inquiry and let us know your packaging application. – We typically have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we also offer very short lead times starting from approximately 3 weeks. – All machines are supplied with a full warranty. Gedpfsv Nnmlex Algsbn

Kondisi: baru, Tahun pembuatan: 2025, Screw dosing unit for powders. Dosing via rotating screw spindle. – Specifications: Filling range: 10–5000g; Hopper capacity: 50 liters; Hopper with side opening; Stainless steel 304 construction; Power supply: 220~415V; Power consumption: 2.25kW. Gsdsv Nnmxepfx Algjbn Please note that our new prices are often below the typical used equipment prices. Feel free to contact us with your packaging requirements. – We usually have 30–50 different new machines available from stock for immediate delivery. For machines manufactured to customer specifications, we offer very short delivery times starting from around 3 weeks. – All machines are supplied with a full warranty.

Tahun pembuatan: 2025, Kondisi: baru, Screw dosing unit for powders. Dosing via rotating screw auger. - Specifications: Filling range: 3–500g; Filling hopper capacity: 30 liters; Hopper with side opening; Made of stainless steel 304; Power supply: 220~415V; Power consumption: 1kW. Please note that our new prices frequently undercut the usual prices for used equipment. Feel free to send us your enquiry and tell us about your packaging requirements. – We typically have 30–50 different new machines available from stock at all times. For custom-built machines, we also offer very short lead times starting from approx. 3 weeks. – All machines come with full warranty. Gsdpfx Alev Nnmfsgjbn

Kondisi: baru, Tahun pembuatan: 2025, Screw dosing unit for powders. Dosing via rotating screw conveyor. - Specifications: Filling range: 1-200g; Hopper capacity: 15 litres; Hopper with side opening; Stainless steel 304 design; Power supply: 220~415V; Power consumption: 1kW. Please note that our new equipment prices are often below the typical used equipment prices. Feel free to contact us with your specific packaging requirements. - We typically have 30-50 different new machines available from stock at all times. For custom-built equipment, we offer very short lead times starting from approx. 3 weeks. - All machines are supplied with a full warranty. Godpfjv Nnl Ujx Algsbn

Kondisi: hampir baru (bekas), diameter sekrup: 82 mm, Schnecke and barrel (plasticizing unit) 82mm Suitable for: - DEMAG D430-2350 NC II and NC III machines - DEMAG D400-2800 NC III - DEMAG D500-2800 NC III Gsdpfx Alew A R H Tegjbn Shot weight: - 1390g = 1560ccm (D430-2350 NC II & NC III) - 1490g = 1670ccm (D400 / D500-2800 NC III) The mounting block (cooling flange) must be transferred from the old barrel. The screw and barrel are in as-new condition (dimensions checked). Complete with RSP.

Kondisi: bekas, Unit dosing, sekrup dosing, hopper dosing Dilengkapi dengan dasar yang dapat digerakkan untuk mencegah pembentukan jembatan material Dilengkapi dengan panel kontrol Gbjdpfjx Nzvfjx Algjn Diameter sekrup sekitar 30 mm Lihat iklan kami lainnya VMA Wekerom

Kondisi: baru, Tahun pembuatan: 2026, en-de-machinery-001 Gbjdevg U Dxepfx Algen

Kondisi: sangat baik (bekas), pl-hu-01 Gbjdpfx Aljyxtf Rsgon

Kondisi: sangat baik (bekas), For sale: Professional automatic Mitutoyo HV-100 Vickers hardness tester, Japanese-made, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and a Mitutoyo Vision Unit, enabling fast, repeatable, and fully automated hardness measurements without subjective operator input. Designed for measurement laboratories, quality control departments, manufacturing facilities, automotive, aerospace, and tooling applications. ⸻ Key Information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic indent recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory design ⸻ Technical Condition • Device is functional and complete • Excellent visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for operation after connection Gbedpfx Asyc H I Selgen ⸻ Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Complete set of weights • Original accessories and holders • Transport cases with accessories • Original Mitutoyo documentation and manuals • Weight: 65 kg.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Reda STERILDOSE unit dosis aseptik Gbedpfx Aoyil A Solgon Dapat digunakan sebagai doser aseptik untuk mendosis komponen apa pun ke dalam susu, jus, dan produk minuman lainnya Kapasitas: 3000 l/jam Kondisi baru Dimensi PxLxT: 2650x1800x2230 mm

Kondisi: bekas, With this offer, you are purchasing used equipment: "Canon Document Insertion Unit N1" Items included in the sale: 1 x Canon Document Insertion Unit N1 suitable for various Canon models Condition: Gbsdpfx Aljt Rfh Eegen This offer is for a used device which may show signs of wear (such as minor scratches or yellowing). The device has been tested and is fully functional. Packaging and Shipping: You are welcome to inspect the device during our business hours. Please contact us to arrange an appointment! Sea-worthy packaging and worldwide shipping available upon request! For further information, please feel free to contact us directly.

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, tekanan: 58 batang, de-hu-758 Godpszaqu Djfx Algsbn

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 1.408 h, nomor mesin/kendaraan: 89-4010241, KOMPRESOR UDARA AIRMAN BEKAS 830CFM, 150PSI Godpfxoyrb Hns Algjbn MODEL: PDSF830S NOMOR SERIAL: 89-4010241 TAHUN: 2008 JAM OPERASI: 1408 (SESUI FOTO)

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 04344, FABBRICAMENTE NUOVO Leistritz Serie ZSE Maxx (27 / 40 / 50) – 48 L/D – 0 Ore – Avvolto in fabbrica! Specifiche tecniche Produttore: Leistritz Extrusionstechnik GmbH Modelli disponibili: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Anno di costruzione: 2024 Condizioni: 100% nuovo di fabbrica (Zero ore di funzionamento, totalmente inutilizzato, ancora nell’imballo/origine fabbrica) Rapporto L/D: 48 L/D (Tutte le unità aggiornate direttamente da Leistritz con nuovi set completi di cilindri e nuovi alberi) Tutte le macchine sono dotate di alimentatori laterali. Descrizione Disponibili per vendita immediata singolarmente o in lotto: Tre (3) estrusori bivite Leistritz ZSE Maxx 2024 impeccabili (modelli: ZSE 50 Maxx, ZSE 40 Maxx e ZSE 27 Maxx). Queste unità erano originariamente macchine da laboratorio di proprietà Leistritz. Per soddisfare requisiti produttivi di alto livello, Leistritz ha effettuato direttamente l’upgrade di tutte e tre le unità portandole a un rapporto L/D di 48. Gli upgrade OEM includono nuovi set completi di cilindri e nuovi alberi montati direttamente in fabbrica. Tutte le unità sono in condizioni perfette, completamente nuove, con zero (0) ore di funzionamento. Sono ancora sigillate e imballate nelle casse originali dalla fabbrica: non sono mai state aperte, toccate o messe in servizio dal loro arrivo da Leistritz. Ciascuna macchina viene proposta come sistema completo chiavi in mano, fornita con sistema di alimentazione dedicato, architettura di controllo e un’ampia dotazione di attrezzature e ricambi originali. Fornitura e accessori inclusi (per ogni macchina) Sistema di alimentazione ed estrusione Alimentatore volumetrico e alimentatore laterale (con apposito carrello per alimentatore laterale) Bocche di carico Accessori downstream e testa filiera Testa filiera strand, piastre forate, portafiltri Controllo e sistema elettrico Quadro di comando completo (con macrometro integrato nel pannello operatore) Set completo di cavi di collegamento e cavi per azionamento principale Gedpfxsy Ufk Rj Algjbn Kit ricambi completo per quadro elettrico Sistema di vuoto e degasaggio Set supplementare di pompe per vuoto, tubazioni per vuoto e manometri Sistemi di riscaldamento/raffreddamento per pompe vuoto e relativi collegamenti Sensoristica, manutenzione e installazione Sensori di temperatura e pressione fusione Dispositivo per montaggio coclee, estrattori e spazzole di pulizia Barre di sollevamento, elementi di livellamento, inibitori di corrosione Riepilogo per acquirenti Modelli disponibili: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Pronta consegna: nessuna attesa per tempi di produzione – disponibili subito. Garanzia OEM: tutti gli aggiornamenti e le estensioni a 48 L/D effettuati ufficialmente da Leistritz. Prezzi disponibili per singola macchina o per il pacchetto completo da tre unità. Foto degli imballi originali e della documentazione su richiesta.