Beli Winter Rotormax 30 X 12 Hydraulic bekas (89.033)

Kondisi: baru, Tahun pembuatan: 2025, de-hu-rotormax-spec Iiodpov A E Rusfx Ahyjh

Kondisi: baru, Tahun pembuatan: 2025, Measurements (LxWxH) 0x0x0 mm Weight 0 kg Total power requirement 2.5 kW Gluing star ROTORMAX 40 X 12 HYDRAULIC - Working length 4000 mm - Working width 1200 mm - Gluing thickness 20 - 80 mm Iedpfev A E Rzex Ahyjih - Number of levels 3 - Manual rotation - Pressing is performed with a single-sided hydraulic cylinder - Number of cylinders per level: 8 - The pressure cylinders are fixed - Cylinder type Ø 50 x 150 mm - Specific pressure 7 kg/cm² - Number of hold-down devices per level: 4 - Each hold-down device has a pneumatic cylinder - Pneumatic cylinder type Ø 50 x 75 mm - Each hold-down device has its own air valve for on/off - Pressure regulation with regulator - Hydraulic power unit - Pump flow rate 10.0 l/min - Hydraulic motor power 2.5 kW - Max. pressure for the hydraulic motor: 30 – 160 bar - Parking station for hold-down devices

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (length/width/height) 0x0x0 mm Weight 0 kg Total power requirement 2 kW Gluing Star ROTORMAX 25 x 12 HYDRAULIC Iodpov A E Rhsfx Ahyeih - Working length: 2500 mm - Working width: 1200 mm - Gluing thickness: 20 - 60 mm - Number of levels: 3 - Manual rotation - Pressing is performed with a single-sided hydraulic cylinder - Number of cylinders per level: 5 - The pressure cylinders are fixed - Cylinder type: Ø 50 x 150 mm - Specific pressure: 6 kg/cm² - Number of hold-down clamps per level: 2 - Each hold-down clamp has a pneumatic cylinder - Pneumatic cylinder type: Ø 50 x 100 mm - Each hold-down clamp has its own air valve for On/Off - Pressure regulation via regulator - Hydraulic unit - Pump flow rate: 6.3 l - Hydromotor power: 2 kW - Max. pressure for the hydromotor: 30 – 150 bar - Parking position for the hold-down clamps

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Total power requirement 0 kW Glue Application Star ROTORMAX 25 x 12 PNEUMATIC - Working length: 2500 mm - Working width: 1200 mm - Gluing thickness: 20 - 60 mm - Number of levels: 3 - Manual rotation - Pressing is performed with pneumatic cylinders - Number of cylinders per level: 5 - The pressure cylinders are fixed in place - Cylinder type: Ø 100 x 150 mm - Specific pressure: 1.8 kg/cm² - Number of hold-down devices per level: 2 Iodpfx Aov A E Rnehyoih - Each hold-down is equipped with a pneumatic cylinder - Pneumatic cylinder type: Ø 50 x 75 mm - Each hold-down has its own air valve for On/Off - Pressure adjustment with regulator - Max. pressure: 8 bar - Parking position for the hold-down device

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH) 3800 x 2100 x 2100 mm Weight 3500 kg Total power requirement 13 kW CNC Machining Center PTP-1230 DELUXE - Travel range X-axis: 1640 mm - Travel range Y-axis: 3400 mm - Travel range Z-axis: 250 mm - Working area X-axis: 1240 mm - Working area Y-axis: 3060 mm - Working area Z-axis: 100 mm - Drive system (X & Y axis): rack and pinion - Drive system (Z axis): ball screw - Travel motors: AC servo motors YASKAWA M-III - Milling spindle, air-cooled HSD / Italy 9.5 kW, HSK 63 F - Spindle speed stepless up to 24,000 rpm - Tool changer, carousel type, 8-fold, moving with gantry - Drilling unit with 9 vertical spindles + 6 horizontal spindles + groove saw unit - SHIMPO geared drive - Max. traverse speed: 45 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Console table with easy-to-position vacuum pods (SCHMALZ) and retractable workpiece side stops - 6 supports with 18 SCHMALZ vacuum pods - 9 pcs. VCBL-K1 140*115*50 mm - 6 pcs. VCBL-K1 125*75*50 mm - 3 pcs. VCBL-K1 125*50*50 mm Iisdpfxev A E I Tj Ahysh - BECKER vacuum pump 4.0 kW, oil-free, air-cooled, capacity 129 m3/h - Workpiece positioning in X and Y, pneumatically retractable stops - Automatic tool length sensor - Automatic lubrication pump - CAD/CAM software EXICAM (English) - Control system OSAI / Italy - Interface: Ethernet/USB/CompactFlash card - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0-45°C - Width: 2100 mm - Length: 3800 mm - Weight: 3500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 3800 x 2100 x 2100 mm Weight: 2900 kg Total Power Requirement: 19 kW CNC Machining Center ROUTERMAX 1230 ALL-ROUNDER - Working area X-axis: 1260 mm - Working area Y-axis: 3060 mm - Working area Z-axis: 100 mm - Spindle: Italian HITECO 9.0 kW / HSK 63 F - Spindle speed, stepless: 0–24,000 rpm - Rapid traverse speed: 80 m/min - Working speed: 20 m/min - Carousel tool changer with 8 positions - Drilling unit with 9 vertical spindles + 6 horizontal spindles + grooving saw unit - Drive system (X & Y axes): Rack and pinion drive - Drive system (Z axis): Ball screw spindle - Traverse drives: AC servo motors YASKAWA - CAD/CAM software EXICAM (English) - Control / Controller: OSAI / Italy - Working accuracy: 0.05 mm - Console table with easily positionable vacuum cups (SCHMALZ) and retractable workpiece side fences - Workpiece positioning in X and Y, pneumatically retractable fences Iiodpfxev A E Srs Ahyeh - Interface: Ethernet/USB/CompactFlash card - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0–45°C - BECKER vacuum pump: 160 m³/h - Dimensions width: 2100 mm - Dimensions length: 3800 mm - Weight: 2900 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, nomor mesin/kendaraan: 53, berat keseluruhan: 38.500 kg, tegangan masuk: 400 V, arus masuk: 355 A, frekuensi input: 50 Hz, kecepatan broaching: 12 m/menit, diameter benda kerja (maks.): 225 mm, panjang total: 7.100 mm, lebar total: 11.560 mm, tinggi total: 6.000 mm, Forst RISH 60 x 2125 x 630 Drall – Mesin internal vertikal Mesin Forst bekas untuk proses internal “Drall” pada benda kerja roda gigi. Sistem ini menggunakan meja yang dapat dinaik-turunkan dan penggerak “Drall” servo-elektrik; sudut “Drall” disesuaikan melalui program NC. Pemrosesan dilakukan secara individual atau berpasangan tergantung pada benda kerja. Identifikasi Produsen: Forst Technologie GmbH & Co. KG Tipe: RISH 60 x 2125 x 630 Drall Nomor Pabrik: 53 Nomor Pesanan Forst: M233202 Referensi / Nomor Inventaris: 351024 Tahun Pembuatan 2019 sesuai kartu mesin Data Teknis sesuai dokumentasi mesin - Gaya tarik maksimum: 600 kN - Langkah maksimum: 2.125 mm - Kecepatan pemotongan maksimum: 12 m/menit - Kecepatan langkah balik: 20 m/menit - Diameter benda kerja maksimum: 225 mm - Tinggi benda kerja maksimum: 50 mm - Diameter alat maksimum: 200 mm - Diameter tangkai alat: 80 mm - Diameter ujung alat: 75 mm - Dimensi keseluruhan sistem (P x L x T): sekitar 7.100 x 11.560 x 6.000 mm - Berat keseluruhan sistem: sekitar 38.500 kg - Berat mesin dasar: sekitar 34.500 kg - Sambungan listrik: 400 V, 3 fase, 50 Hz - Arus nominal sesuai pelat nama: 355 A Peralatan yang terdokumentasi - Siemens SINUMERIK 840D sl / S7-300 - Panel operator OP012 dan perangkat kontrol manual HT8 Iijdpfxsz Hq Ako Ahyeh - Penggerak ulir rol SKF dan rel linier - Penjepit benda kerja hidraulik - Sistem pendingin dan pelumasan dengan suplai tekanan tinggi/rendah dan tangki 1.800 liter - Konveyor serpihan dan sentrifugal serpihan - Pemisah kabut oli dan pelumasan pusat Buku petunjuk pengoperasian dan dokumentasi teknis tersedia. Data dan peralatan yang disebutkan menjelaskan kondisi sistem yang terdokumentasi. Cakupan pengiriman saat ini harus disepakati sebelum penutupan. Kesesuaian untuk benda kerja lain memerlukan pemeriksaan teknis dan alat serta perlengkapan yang mungkin perlu disesuaikan. Mesin bekas, berfungsi tanpa gangguan hingga pembongkaran. Harga berdasarkan permintaan.

Kondisi: bekas, Tahun pembuatan: 2018, de-hu-001 Iodpfx Asy Ehzmjhyoih

Kondisi: bekas, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5480, EUROMAC XT FLEX 12S 1500/30-2500, mesin CNC untuk pemotongan/pelubangan. Data teknis: - Tahun pembuatan: 2022 Iiedpfx Aoz Aaw Sohyeh - Nomor seri: 5480 - Gaya pemotongan maksimum: 30 ton - Jangkauan kerja sumbu X: 2500 mm - Jangkauan kerja sumbu Y: 1500 mm - Termasuk dudukan untuk beberapa alat: XMTE6 dan XMTE10 - Pintu saluran untuk mengeluarkan komponen hingga ukuran 1000x1500 mm, dilengkapi dengan sensor deteksi komponen Mesin berada di Ivanjica, Serbia. Informasi lebih lanjut, foto tambahan, dan inspeksi dapat dilakukan sesuai permintaan.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 2200 x 1250 x 1750 mm Total Power Requirement: 6.5 kW Weight: 700 kg CNC Engraving and Milling Machine WINTER ROUTERMAX 6012 PREMIUM - X-axis working area: 600 mm - Y-axis working area: 1200 mm - Z-axis working area: 180 mm - Working precision: ±0.04/300 mm - Vacuum grid table with T-slots - Vacuum pump 2.2 kW, dry-running, air-cooled - Max. traverse speed: 15 m/min - Max. working speed: 6 m/min - Working accuracy: +/-0.2 mm - Repeat accuracy: +/-0.02 mm - Milling spindle motor: 3.5 kW, ER 25, air-cooled - Collet chuck tool holder diameter: 2, 4, 6, 8, 10, 12 mm - Spindle speed up to 18,000 rpm - Drive motors: Stepper motors - Voltage: 400 V / 50Hz - Linear guides on X, Y, Z axes - Travel system on X, Y, Z via ball screw - Command language: G-code - Control: DSP type NK 105 (OPTION: MACH3) - Interface: USB - CAD/CAM software: Vectric 2D PRO - Tool length sensor - Ambient temperature: 0-45°C - Relative humidity: 30-75 % - Dimensions: L=2200, W=1250, H=1750 mm Ijdpfx Aev Dmrcohysih - Weight: 700 kg

Kondisi: bekas, Tahun pembuatan: 2023, de-hu-001 Iiodpfjyk H S Hsx Ahyjh

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: M205M410, lebar kerja: 230 mm, tinggi penyerutan: 160 mm, lebar perataan: 230 mm, tinggi kerja: 160 mm, berat keseluruhan: 3.800 kg, tinggi benda kerja (maks.): 160 mm, jenis arus masuk: tiga fasa, lebar benda kerja (maks.): 230 mm, tegangan masuk: 400 V, jumlah spindel: 5, frekuensi input: 50 Hz, Dijual mesin perencanaan empat sisi profesional WINTER TIMBERMAX 5-23. Mesin ini hanya digunakan secara sporadis untuk produksi kami sendiri dan tidak digunakan dalam operasi shift berkelanjutan. Data teknis: - Produsen: WINTER Holztechnik GmbH - Model: TIMBERMAX 5-23 - Tahun pembuatan: 2017 - Nomor seri: M205M410 - 5 spindel Iisdpfx Ahsz Rpd Ajyeh - Area pemrosesan: 20–230 x 8–160 mm - Kecepatan umpan: 6–36 m/menit - Tegangan suplai: 400 V - Frekuensi: 50 Hz - 3 fase - Daya maksimum: 37,43 kW - Berat: sekitar 3.800 kg - Tanda CE - Juga cocok untuk pemrosesan kayu lembap Mesin ini berfungsi penuh. Mesin ini berlokasi di Polandia, 64-920 Piła. Inspeksi dan demonstrasi mesin dapat dilakukan setelah perjanjian sebelumnya. Foto tambahan, dokumen teknis, serta video mesin yang beroperasi dapat diberikan atas permintaan.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 2300 x 1250 x 1750 mm Weight: 800 kg Total power requirement: 8.5 kW CNC Machining Center WINTER ROUTERMAX ATC 6012 PREMIUM - Working area X-axis: 600 mm - Working area Y-axis: 1200 mm - Working area Z-axis: 180 mm - Working accuracy: ±0.04/300 mm - Vacuum grid table with T-slots - Vacuum pump 2.2 kW, dry-running, air-cooled - Max. traverse speed: 15 m/min - Max. working speed: 6 m/min - Working accuracy: +/-0.2 mm - Repeatability: +/- 0.02 mm - Milling spindle: 3.2 kW, water-cooled spindle with 4 x NBT30 tool holders - Collet chuck tool holder diameters: 2, 4, 6, 8, 10, 12 mm - Spindle speed up to 24,000 rpm - 4-position automatic tool changer - Drive motors: AC servo motors, 750 W Iijdsv Dmrvopfx Ahyjh - Voltage: 400 V / 50 Hz - Linear guides on X, Y, Z axes - Ball screw drive system on X, Y, Z axes - Programming language: G-code - Control: DSP Type NK 105 (Option MACH3) - Interface: USB - CAD/CAM software: Vectric 2D PRO - Tool length sensor - Ambient temperature: 0–45°C - Relative humidity: 30–75 % - Dimensions (L=2300, W=1250, H=1750 mm) - Weight: 800 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jam operasional: 44.561 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 173072, gaya penjepit: 3.000 kN, diameter sekrup: 55 mm, Perlengkapan: dokumentasi / manual, Di sini, sebagai perusahaan dagang mesin cetak injeksi, kami menawarkan mesin cetak injeksi bekas yang terawat dengan baik berikut ini: Tentu saja, kami juga membeli mesin cetak injeksi yang terawat dengan baik, mulai dari tahun pembuatan 2010. Kami adalah grosir mesin cetak injeksi selama lebih dari 25 tahun. Produsen: Engel Tipe: VC 1350/300 spex plus Viper 12 Robot Nomor Seri: 173072 Iiedpfx Aez Ng Rwehyeh Tahun Pembuatan: 2009 Jam Operasi: 44.561 jam Kontrol: CC200 Kondisi berfungsi penuh Kondisi sangat terawat Mesin berasal dari kepemilikan pertama di Jerman Fitur Tambahan: - Sistem penanganan Viper12 (sumbu Z 2240 mm, sumbu X 600 mm, sumbu Y 1200 mm) - Penggerak inti 1 x - Pelat penjepit diperbesar secara vertikal - Pelat penjepit standar, pusat 160 mm - Dapat digunakan hingga 350°C - Kontrol nozel alat 1 arah, hidraulik - Unit injeksi dapat diputar - Sekrup S8, tahan aus, kualitas tinggi / untuk termoplastik - Panjang sekrup L/D20 - Sistem hidraulik HV1 untuk urutan gerakan sekuensial - Antarmuka pewarnaan - 4 stopkontak 10A/16A, sisi tertutup - Antarmuka pengaman ejektor - Antarmuka kontak bebas potensial - Dapat diprogram secara bebas, 4 x output digital Unit Injeksi Sekrup: ⌀ 55 mm Berat injeksi: 570 gr./PS Tekanan injeksi: 1763 bar / ditingkatkan menjadi 2183 bar Volume injeksi: 618 ccm Unit Penjepit Gaya penjepit: 300 ton / 3000 kN Jarak tiang: tanpa tiang Pelat penjepit: 1100 x 700 mm (tinggi x lebar) Langkah pembukaan alat: 900 mm Tinggi pemasangan alat: 400 mm Jarak maksimum antar pelat: 1300 mm Gaya ejektor / 90 kN Unit penjepit hidraulik Berat: 19.400 kg Dimensi: 7,06 x 2,13 x 2,45 m Tersedia segera dari gudang kami di Hannover/Jerman atau pengiriman ke lokasi Anda dengan biaya pengiriman. Pengiriman ke seluruh dunia dimungkinkan. Mesin ini adalah milik kami sepenuhnya. Mesin yang diminta tersedia di gudang kami di Hannover dan akan ditawarkan setelah diuji fungsinya, dan dapat diperiksa saat beroperasi. Untuk informasi tentang mesin yang kami tawarkan dan perusahaan kami: - Kami hanya menjual mesin yang kami beli dari produksi yang sedang berjalan, yang berasal dari gudang kami di Hannover. - Semua mesin yang kami tawarkan diperiksa dan diuji sebelum dilepas. - Kami TIDAK menjual barang dari perusahaan yang bangkrut. - Kami BUKAN perantara yang menjual properti pihak ketiga. - Semua mesin yang kami tawarkan berasal dari perusahaan yang sukses, di mana perawatan dan pemeliharaan merupakan hal yang biasa. - Semua mesin yang kami tawarkan dapat diperiksa di gudang kami.

Kondisi: bekas, Tahun pembuatan: 2011, de2hu-001 Iedpjxq Hikefx Ahysih

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 4400 x 4600 x 3700 mm Weight: 4300 kg Total power requirement: 3.8 kW Verleimstern VS-3000-12 The Verleimstern is designed for width and thickness lamination of timber, where glue joints are air-dried. The Verleimstern is highly space-efficient and can be expanded in a modular fashion, both in terms of the dimensions of the workpieces and the required output. Furthermore, it is user- and maintenance-friendly. The glued timber is placed into clamping units located on the endless chain in each compartment and can be quickly and easily adapted to different workpiece dimensions. The Verleimstern is suitable for material thicknesses from 25 to 90 mm. For thinner or thicker materials, additional pressure elements (15–25 mm) must be used. The clamping units can be tightened manually, with a manually-operated hydromotor, or with an automatically-operated hydromotor. - Working length: 3000 mm - Working width: 1250 mm - Material thickness: 25 – 90 mm - Number of layers: 12 - Number of clamping units per compartment: 8 - Air connection: 8 bar, 1/2" - Motor power for rotation device: 0.55 kW - Clamping pressure per unit: 1 – 12 kN - Max. load per compartment: 150 kg - Pneumatics: Camozzi - Electrics: Telemecanique - Gear motor: Watt - Clamping units are finger-jointed - Protective guard - Hydraulic unit - Pump flow rate: 6.3 l - Hydromotor power: 3.0 kW - Hydraulic tank: 50 l - Max. hydraulic motor pressure: 110 bar - Transport dimensions: 3800 x 2400 x 2200 mm, 1400 kg 4400 x 1600 x 2000 mm, 950 kg Iedpfxsv A Hw Nj Ahyjih 1600 x 1600 x 800 mm, 900 kg 1600 x 1600 x 800 mm, 900 kg - Installation footprint (L x W x H): 4400 x 4600 x 3700 mm - Weight: 4300 kg Option: - Pressure elements for thin panels (15–25 mm): €44.00 each - Alignment with 4 pneumatic cylinders: €600.00

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (Length/Width/Height): 2800 x 2040 x 2200 mm Weight: 5,050 kg Total power requirement: 95.6 kW Wide Belt Sander WINTER SANDOMAT 1300-RRP DELUXE - Working width: 40–1300 mm - Working thickness: 3–120 mm - Shortest workpiece length: 580 mm 1st sanding unit: - Motor: 37.0 kW - Sanding speed: 21 m/s - Calibration roller 2nd sanding unit: - Motor: 30.0 kW - Sanding speed: 19 m/s - Calibration roller 3rd sanding unit: - Motor: 22.0 kW - Combination unit roller/pad - Sanding speed: 18.5 m/s 4th de-dusting brush: - Motor: 0.37 kW - Feed speed: 6–30 m/min - Feed motor: 5.5 kW - Motorized height adjustment: 0.75 kW - Total connected load: 95.6 kW - Abrasive belt size: 1330 x 2200 mm - Working air pressure: 8 bar - Air consumption: 0.2 m³/min - Extraction volume: 12,000 m³/h - Extraction speed: 25–30 m/s - Extraction ports: 7 x Ø150 mm - Automatic conveyor belt centering - Automatic star-delta switching - Pneumatic belt tensioning - Over-thickness protection with automatic release - Ammeter for monitoring material removal Iodpfev Dmr Nox Ahyoih - Instant stop with disc brake in case of malfunction - Overall dimensions (L x W x H): 2800 x 2040 x 2200 mm - Weight: 5,050 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Kami menawarkan Baykal BPM 1225 x 30 mesin press rem ini dalam kondisi sangat baik, tahun pembuatan 2017. Produsen: Baykal Model: BPM 1225 x 30 Iodpfx Ahey Swfhsyjih Tahun pembuatan: 2017 Kondisi: sangat baik ID Kategori: 1464 ID Tipe: 1717 Jenis mesin: press rem Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 4000 x 2300 x 2100 mm Weight: 2300 kg Total power requirement: 21 kW CNC machining center ROUTERMAX ATC 1530 ECO - Working area X-axis: 1500 mm - Working area Y-axis: 3000 mm - Working area Z-axis: 300 mm - Milling spindle, air-cooled, 9.5 kW, ISO 30 - Spindle speed continuously variable up to 24,000 rpm - Tool changer, 12 positions, lateral - Travel system (X & Y axis): rack and pinion drive - Travel system (Z axis): ball screw - Travel motors: AC servo motors, Leadshine 850 W - Max. traverse speed: 45 m/min - Max. working speed: 20 m/min - Working accuracy: 0.05 mm - Vacuum matrix table with 6 zones and T-slots - Vacuum pump: 7.5 kW, air-cooled - Workpiece positioning: pneumatically retractable stops, 2 each on X and Y - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (including NESTING) - Controller: DSP NK105 G3 - Interface: USB - Electrical connection: 3-phase, 400 V, 50 Hz - Operating ambient temperature: 0–45°C - Dimensions, width: 2300 mm - Dimensions, length: 4000 mm Iiedpfx Aov A E Tvohyjh - Weight: 2300 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 4000 x 2900 x 2100 mm Weight: 2500 kg Total power requirement: 24 kW CNC Machining Center ROUTERMAX ATC 2130 ECO - Working area X-axis: 2100 mm - Working area Y-axis: 3000 mm - Working area Z-axis: 300 mm - Milling spindle, air-cooled, 9.5 kW, ISO 30 - Spindle speed infinitely variable up to 24,000 rpm - Tool changer with 12 positions, side-mounted - Drive system (X & Y axes): rack and pinion drive - Drive system (Z axis): ball screw - Drive motors: Leadshine AC servo motors, 850 W - Max. traverse speed: 45 m/min - Max. working speed: 20 m/min Isdov A E Uajpfx Ahyeih - Working accuracy: 0.05 mm - Vacuum matrix table with 8 zones and T-slots - 2 air-cooled vacuum pumps, each 5.5 kW - Workpiece positioning with pneumatically retractable stops, 2 each on X and Y - Tool length sensor - CAD/CAM software: VECTRIC CUT 2D PRO (nesting included) - Controller: DSP NK105 G3 - Interface: USB - Electrical connection: 3-phase, 400 V, 50 Hz - Operating temperature: 0–45°C - Width: 2900 mm - Length: 4000 mm - Weight: 2500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 8800 x 2100 x 2100 mm Weight: 6000 kg Total Power Requirement: 18-36 kW CNC Processing Center ROUTERMAX NESTING 1224 DELUXE - X-Axis Travel: 2500 mm - Y-Axis Travel: 1260 mm - Z-Axis Travel: 200 mm - X-Axis Working Area: 2440 mm - Y-Axis Working Area: 1220 mm - Z-Axis Working Height: 70 mm - Loading/Unloading Speed: 15 m/min - Routing Spindle, Air-cooled HSD / Italy, 9.0 kW, ISO 30 (Option: 11 kW HSK 63F) - Spindle Speed Infinitely Variable: 24,000 rpm - Tool Changer, Rotary Carousel, 8-fold, traveling with the gantry - Vertical Drilling Head 5 + 4 FAM / Italian - 5 spindles in Y-direction, spindle pitch: 32 mm - 5 spindles in X-direction, spindle pitch: 32 mm - Drive System (X & Y axis): Rack and pinion - Drive System (Z axis): Precision ball screw - Axis Drive Motors: YASKAWA AC Servo Motors - High-precision THK Linear Guides with Long-life Lubrication Units on X, Y, Z axes - SHIMPO Gear Drive - Max. Traverse Speed: 80 m/min - Max. Working Speed: 25 m/min - Working Accuracy: 0.05 mm - Vacuum Grid Table with 4 Sections - BECKER Dry-running, air-cooled vacuum pump, output 250 m³/h (Option: 500 m³/h) - Workpiece Positioning via Pneumatically Lowerable Stops, 2 each in X and Y directions - Tool Length Measurement Sensor Iiedpfxsv A Hcfo Ahyeh - CAD/CAM Software EXICAM - Controller: OSAY - Interfaces: Ethernet/USB/CompactFlash Card - Safety Light Curtain according to EN 848-3 (optional depending on site conditions) - Loading via Hydraulic Scissor Lift Table The workpiece is fixed by vacuum suction cups mounted on the gantry and pulled into the machine from the scissor lift table. After nesting, the material is transferred by a pusher onto the discharge table's conveyor belt. - Electrical Connection: 3 phases, 400 V, 50 Hz - Operating Temperature Range: 0–45°C - Dimensions Width: approx. 2100 mm - Dimensions Length: approx. 8800 mm - Total Weight: approx. 6000 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, de-001 Ijdpfx Ahsu E E A Tjysih

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L x W x H): 312 x 410 x 739 mm Weight: 90 kg Total power requirement: 2 kW Fibre Laser Marking Machine LASERMAX FL 30 - Working area: 200 x 200 mm - Table height adjustment: 308 mm - Engraving speed: 7000 mm/s - Maximum marking depth: 0.3 mm - Minimum line width: 0.01 mm - Minimum character size: 0.05 mm - Repeatability: +/- 0.001 mm - Laser module: Maxphotonics, service life approx. 100,000 hours - Laser warranty: 1 year - Laser power: 30 W (air-cooled) - Wavelength: 1064 nm Iiodpfovz Hh Sjx Ahysh - Frequency: < 100 kHz - Air cooling - Voltage: 230 V / 50 Hz - Power consumption: 2000 W - Dimensions: L=312 mm, W=410 mm, H=739 mm - Weight: 90 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 2850 x 2270 x 2160 mm Weight: 1800 kg Total power requirement: 25.2 kW Wedge plank band saw HP-300PBX - with digital size display - Maximum working size: 300 mm (W) x 300 mm (H) - Distance from saw blade to feed table: 4-250 mm Iisdpfx Ahsvz E Sveysh - Conveyor belt size: 285 mm (W) x 5470 mm (L) - Saw wheel dimensions: Ø711 mm x 50.8 mm - Maximum feed speed: 45 m/min - Saw wheel motor: 22.0 kW - Hydraulic pressure: 40 kg/cm2 - Extraction nozzle diameter: 2 x 100 mm - Saw blade size: 4572 mm x 50.8 mm - Feed system: 2.2 kW motor with 15:1 gearbox and inverter - Motorized height adjustment: 1.0 kW motor Packaging dimensions with pallet: 2850 x 2270 x 2160 mm / 2000 kg - Machine weight: 1800 kg - Band wheel tracking via linear guide way - Height adjustment via ball screw spindle - Heavy-duty pressure roller system - Hold-down roller via pneumatic cylinder - Side feed support - Includes mist coolant and saw blade cleaning system - Blade tension control with electric motor/hydraulic tensioning system - 22.0 kW inverter - Low-friction bandsaw blade guides - Manual tilting of the 45-degree conveyor - Return roller conveyor (manual) - Angle scale for conveyor inclination - Voltage: 400 V, 50 Hz With a width of 150 mm, the feed speed can be 25 to 30 m/min. Cutting speed for pine (workpiece dimension): 2 x 203 mm: min. 32 – max. 49 m/min 2 x 254 mm: min. 26 – max. 32 m/min 2 x 304 mm: min. 16 – max. 26 m/min

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, jam operasional: 47 h, MACHINE WITH ONLY 47 operating hours. Inspected by ERMAKSAN FRANCE. Iedpfercb Hqex Ahyeih COMPLETE DATA AVAILABLE IN DOCUMENTS FANUC CONTROL