BARU semi-otomatis. gergaji pita

MEP Shark 281 CCS

Kondisi: baru, Model designation Iaedpfx Aogvkchoa Nel Shark 281 CCS

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2 t Reeving 4/1 Lifting height 10 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM group 2M Operating voltage 400 V Iaedovx E Ncopfx Aa Nsl Control voltage 230 V Flange width 300 mm Immediately available from stock

Kondisi: baru, Cutting diameter: 250 mm Saw band dimensions: 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.37 t Space required approx. ... m MEP Sawing Machine: Saw bow, vice assembly, and base made from robust cast iron Precision angle markings on the cast iron frame Electrical system (with fully identifiable wiring and 24 V low voltage circuit) Control handle IP 55 for manual cycles (if available) Rotating cleaning brush for the saw band Ijdpfx Aefg E H Iea Njal Quick-clamping assembly with vice for rapid positioning Accurate end stops with adjustment for mitre cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering guides in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic cutting via gravity-fed head advance. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for halting the blade, also available as retrofit for existing machines. Quick-clamping vice Hydraulic tension display for blade tensioning Electric coolant pump for lubrication and cooling of the saw band, with accessible coolant tray located above the base frame For versions with pneumatic vice (MA), the opening and closing is operated by a manual valve (optionally available with foot pedal control).

Kondisi: baru, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Article number: SH281CCS Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 375 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Description: - Saw bow, vice assembly, and base made of high-strength cast iron - Precision angle marking on the cast iron frame - Electrical system (with fully identifiable wiring and 24V low-voltage system) - IP 55 control handle for manual cycles (if applicable) - Rotating chip brush for the saw blade - Quick-approach vice closure system - Precise stops with angle cutting adjustment at 0°, 45°, 60° left - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, instructions for use, and spare parts ordering guide in the user's language - SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic feed cut via gravity. - CCS (Cut Control System) with (A: switch for manual and automatic cut – B: adjustable cutting speed – C: hydraulic brake with reservoir – D: end stop for band shutoff), also available as an option for machines already in service. - Quick-adjust vice - Hydraulic transducer for displaying blade tension - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray above the machine base - For models with pneumatic vice (MA), opening and closing is via manual valve (optional foot pedal available) MEP SHARK 281 SXI evo [Semi-automatic] Article number SH281SXI Motor power 1.5/1.8 kW Vice opening 285 mm Blade dimensions 2950x27x0.9 mm Weight 435 kg Band speed 36/72 m/min Cutting capacity at 0° 250 / 230x230 / 280x200 mm Cutting capacity at 45° right 190 / 180x180 / 180x180 mm Cutting capacity at 45° left - Cutting capacity at 60° right - Cutting capacity at 60° left - Description Semi-automatic function: Vice closes and motor starts, saw head descends for the cut, motor shuts off, saw head raises, vice opens. Features include: - New centralized control console on articulated arm. - Latest-generation hydraulic control unit: highly efficient and low energy consumption. - Base with removable coolant tank. Ijdpfecgbp Isx Aa Neal Machine in full compliance with all CE regulations! For further technical data, please refer to the attached PDF document.

Kondisi: baru, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special features included in the price: - 3 driven rolls Iaedpfx Aasg Tzbwj Nel - Digital display - Includes standard roller set for steel Description Hydraulic / motor-driven ring bending machine Usable horizontally and vertically, with 3 powered rolls All 3 rolls are motor driven Upper roll adjustment is hydraulic Rolls are hardened Left/right rotation via foot pedal Roll shaft diameter: 50 mm Roll diameter (top): 158 mm Roll diameter (bottom): 158 mm Speed: 4.5 m/min Motor power: 0.75 + 1.5 kW Electrical connection: 400 V Complies with CE standard Weight: 420 kg

Kondisi: baru, Cutting diameter: 250 mm Ijdpoxz Hhzsfx Aa Njal Saw blade length: 2950 mm Cutting width: 280 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Cutting range at 90°: flat 280 x 200 mm Cutting range at 90°: square 230 mm Cutting range at 45°: round 190 mm Cutting range at 45°: flat 180 x 180 mm Cutting range at 45°: square 180 mm Cutting range at 60°: round 120 mm Cutting range at 60°: flat 110 x 110 mm Cutting range at 60°: square 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.4 t High-performance mitre band saw for cuts from 0° to 60° to the left CCS (CutControlSystem) for automatic cutting (Infinitely adjustable feed and automatic shutdown at the end of the cut) Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and setting of cutting pressure via compensating spring - Sturdy, torsion-resistant and low-vibration saw frame made of cast steel - Quick-release vice - Carbide blade guides for maximum cutting precision - Large, adjustable cast steel band wheels - Hydraulic unit for saw blade tensioning and monitoring with display on manometer (blade tension = 900 kg) - Clearly arranged control panel with all operating elements - Electric coolant pump for cooling and lubricating the saw blade - Chip removal brush for cleaning the saw blade

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (round): 120 mm Iasdjxaa H Iopfx Aa Nsl Vice width: 285 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2,950 x 27 x 0.9 mm Total connected load: 1.5 / 1.8 kW Machine weight: approx. 370 kg Space requirements: approx. 1,620 x 1,360 mm Equipment: - Robust electro-hydraulic bandsaw (INDUSTRIAL) - Single-sided mitre cut up to 60° - Automatic saw bow lowering with infinitely variable feed adjustment - Cut-off switch at end of cut - Manual cutting function selectable - 2x saw blade speeds - Saw blade guide made of carbide plates - 1x saw blade - 1x angle stop - Rotating swarf removal brush - Control panel located at front right - Hydraulic pressure accumulator for saw blade tensioning with analogue pressure gauge (manometer) - Machine base - Operating manual in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Bandsaw machine Iaedpfjcuntzox Aa Nsl Manufacturer: METALLKRAFT Model: BMBS 230 x 280 H-DG Item No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment includes: - Horizontal vice - Length stop (600 mm) - Electromechanical monitoring of saw blade tension - Chip removal brush - Coolant system - Operating manual

Kondisi: baru, Welding Positioner Table 50 kg Model: KT-50 without chuck Maximum load (horizontal): 50 kg Maximum load (vertical): 25 kg Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilt angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Iajdpfx Aaebambre Nel Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Power supply: AC 110V / 220V 50/60 Hz Price does not include quick-action chuck and height-adjustable workbench. Surcharge for quick-action chuck: €195 Packaging and shipping within Germany: approx. €80

Kondisi: baik (bekas), Tahun pembuatan: 2008, nomor mesin/kendaraan: 21100122-F, 25108 Technical Specifications: - Saw blade dimensions: 350 x 3.4 x 32 mm - Saw blade speed: 3,400 rpm - Cutting capacity at 90° (round): 120 mm - or (flat): 105 x 105 mm - or (flat): 180 x 70 mm - Cutting capacity at 45° (round): 110 mm - or (flat): 135 x 60 mm - Mitre adjustment left and right: 45° - Tiltable mitre adjustment of the saw head to the left for bevel cuts Isdewq N Swjpfx Aa Noal - Pneumatic vices - Discharge roller conveyor with length stop: 2,000 mm - Infeed roller conveyor: 3,000 mm - Drive: 400 V / 2.2 kW - Space requirement approx.: W 600 x H 1,730 x D 1,200 mm - Weight approx.: 180 kg