Gergaji pita ø250 mm

Mep SHARK 282 SXI EVO

Kondisi: baru, Cutting diameter: 250 mm Cutting range at 90 degrees, flat: 280 x 220 mm Cutting range at 90 degrees, square: 220 x 220 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirement: approx. 1700 x 1000 x 1800 mm Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO with semi-automatic/dynamic and manual modes, features a MEP-28 controller for mitre cuts from 45° right to 60° left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers for the cut - Motor switches off - Saw head lifts - Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button.) Some features: - New centralised control panel mounted on a swing arm, allowing the operator to operate easily from any working position. - Low-voltage control unit: - Polyester membrane keypad with thermoformed raised buttons and operation confirmation signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Input and output status * Cut counter * Cutting time elapsed * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position - Manual cycle switch handle, IP55 rated, 24 V. - Complete program of all special cutting cycles. - Ability to determine other special cutting cycles for specific Rodpfx Asfg E H Sodcjch applications. - State-of-the-art hydraulic control unit, highly efficient with low energy consumption. - Large working surface with turntable on roller bearings, 265 mm with pre-loaded thrust bearing, mounted. - Dual blade speed (36/72 m/min.) with control - Prepared for installation of an electronic inverter for variable blade speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from the control panel to suit cutting material. - Clamping device laterally adjustable left/right, with quick-release vice. - Manually operated blade tension control with display on the screen via electronic transducer. - Machine base with extendable coolant tray. - Electric coolant pump for blade cooling and lubrication. - Ready for installation of minimum quantity blade lubrication kit (optional), in addition to standard emulsion oil lubrication. - Chip removal brush. - The machine is designed for pallet truck transport. - Length stop for repeated cuts of same length - Material support arm with roller, for attaching loading platform - Bi-metal saw blade for solid and profile material. - Tools and user manual in the applicable language.

Kondisi: bekas, nomor mesin/kendaraan: 050189, for groove width: 13 - 30 mm Rcjdpfx Adob Amlhjcsh for groove depth: 22 - 35 mm Cutter speed approx.: 1200 rpm Drive motor: AC 220 V, 1020 W Weight: approx. 6 kg

Kondisi: baru, Model designation Shark 282 SXI evo Rcedpogvkctofx Adcsh

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw band dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - With mitre cuts from 45° to the right up to 60° to the left * Mitre adjustment via a large rotary table - MEP microprocessor control EVO for managing all functions * Swivel-mounted, located front right - Choice of manual or automatic lowering of the saw frame * Infinitely variable adjustment of the saw frame descent - Saw band guide made from hard metal plates - Hydraulic saw blade tensioning - incl. digital value display - 2x saw band speeds - 1x bi-metal saw band - Coolant device - 1x angle stop - Chip removal brush Rcjdpfoxaatbsx Adcjh - Machine base with forklift pockets - Operating manual in German Operation in semi-automatic mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice

Kondisi: baru, translation-001 Rodpfegxi D Tex Adcjch

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vise opening: 285 mm Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for full function management * Front right, rotatable - Choice of manual or automatic bow descent * Infinitely variable adjustment of bow lowering speed - Carbide blade guides - Hydraulic blade tensioning with digital value display - 2 x blade speeds - 1 x bi-metal saw blade - 1 x angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Rcedexaa S Ropfx Adceh Semi-automatic operation: - Electro-hydraulic vise clamping - Electro-hydraulic bow descent - Electro-hydraulic bow lift - Electro-hydraulic vise opening SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, 001 Rcedpfjyv Narex Adceh

Kondisi: baru, Tahun pembuatan: 2022, EN23070101 Rcodomf T Hpepfx Adcjh

Kondisi: bekas, Single-column hydraulic press, straightening press, punching frame ECKOLD Rjdpfsd Swtaex Adcsch Press frame with hydraulic cylinder, mobile press, punching unit Type: RSD 1500 - 125 Machine no.: 317 / 690 Year of manufacture: approx. 1986 Pressing force: 150 tons Throat depth: 125 mm Ram stroke: 35 mm Table size: 280 x 210 mm Ram surface: Ø 125 mm Installation height (ram to table): max. 265 mm Table height above floor: 403 mm Hydraulic operating pressure: max. 500 bar - Without hydraulic power unit - Ram surface with 4 threaded holes M16 and 20 mm guide slot, centered centering hole Ø 15 mm - 1 high-pressure hydraulic hose with external thread M30x1.5 mm, hose length 4 meters - 1 high-pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Required space (L x W x H): 700 x 300 x 1450 mm Weight: 1250 kg Good condition

Kondisi: baru, Table length 3000 mm Table width 1500 mm Table height (side surface) 200 mm Weight 1374 kg SIEGMUND official dealer – all items available! Product Description - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5–27 mm - Side panel made from high-quality steel S355J2+N + plasma nitriding - Bore diameter Ø 28 mm - Surface bores in diagonal grid pattern - Corners, edges, and bores rounded - Side panel height 200 mm - Side panel bores in diagonal grid pattern - Includes surface scaling - Reinforced construction with ribs - Grid lines allow precise setups The welding tables are equipped with standard scale. Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion Rodpfxsxabiwo Adcsch - Corrosion-resistant / increased load capacity Features: - 28mm hole grid / dimensions 3000 x 1500 x 200 mm - Plasma-nitrided "Extreme" version with scale - With diagonal grid on the tabletop - Side panel with diagonal grid pattern - Incl. 6x standard base feet