Bandsaw - horizontal

MEP SHARK 282 SXI - Evo

Cutting diameter: 250 mm
Cutting range at 90 degrees, flat: 280 x 220 mm
Cutting range at 90 degrees, square: 220 x 220 mm
Vice width: 285 mm
Cutting speed range: 36/72 m/min
Saw blade dimensions: 2950 x 27 x 0.9 mm
Total power requirement: 1.5 / 1.8 kW
Machine weight: approx. 485 kg
Space requirement: approx. 1700 x 1000 x 1800 mm

Electrohydraulic Semi-Automatic Bandsaw SHARK 282 SXI EVO
with semi-automatic/dynamic and manual modes, features a MEP-28 controller
for mitre cuts from 45° right to 60° left.

Semi-automatic function:
At cycle start: - Vice closes and motor starts -
Saw head lowers for the cut - Motor switches off - Saw head lifts -
Vice opens.

Semi-automatic dynamic system (manual lowering of the saw bow to
the desired position and cycle start via hand button.)

Some features:
- New centralised control panel mounted on a swing arm, allowing the operator
to operate easily from any working position.
- Low-voltage control unit:
- Polyester membrane keypad with thermoformed raised buttons
and operation confirmation signal.
- Display shows:
* Diagnostics (messages in user language)
* Alarms (description of alarm causes)
* Input and output status
* Cut counter
* Cutting time elapsed
* Saw band motor current draw
* Saw band tension
* Saw band speed
* Numeric display of head position
- Manual cycle switch handle, IP55 rated, 24 V.
- Complete program of all special cutting cycles.
- Ability to determine other special cutting cycles for specific
applications.
- State-of-the-art hydraulic control unit, highly efficient
with low energy consumption.
- Large working surface with turntable on roller bearings, 265 mm with
pre-loaded thrust bearing, mounted.
- Dual blade speed (36/72 m/min.) with control
- Prepared for installation of an electronic inverter for variable
blade speed adjustment from 20 to 90 m/min.
- Saw bow stroke programmable directly from the control panel to suit
cutting material.
- Clamping device laterally adjustable left/right, with quick-release vice.
- Manually operated blade tension control with display on the screen via
electronic transducer.
- Machine base with extendable coolant tray.
- Electric coolant pump for blade cooling and lubrication.
- Ready for installation of minimum quantity blade lubrication kit (optional),
in addition to standard emulsion oil lubrication.
- Chip removal brush.
- The machine is designed for pallet truck transport.
- Length stop for repeated cuts of same length
Dkodpfx Asfg E H Sec Tep
- Material support arm with roller, for attaching loading platform
- Bi-metal saw blade for solid and profile material.
- Tools and user manual in the applicable language.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.