Beli Mep Shark 282 Sxi Evo bekas (5)

Kondisi: baru, Model designation Ijdpfsgvkctox Aa Neht Shark 282 SXI evo

Kondisi: baru, Cutting diameter 250 mm Cutting area at 90 degrees: flat 280 x 220 mm Cutting area at 90 degrees: square 220 x 220 mm Vice width 285 mm Cutting speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 485 kg Space requirements: approx. 1700 x 1000 x 1800 mm Electrohydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic/manual function, equipped with MEP-28 control enabling mitre cuts from 45° to the right up to 60° to the left. Semi-automatic function: At cycle start: - Vice closes and motor starts - Saw head lowers to perform the cut - Motor switches off - Saw head lifts - Vice opens Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via manual button). Key Features: - New centralised control console on a pivoting arm for easy operation from any workstation. - Low voltage control panel: * Polyester membrane keypad with thermoformed, raised buttons and operation control signal. * Display shows: - Diagnostics (messages in the user’s language) - Alarms (with description of causes) - Status of inputs and outputs - Cut count - Time taken for each cut - Current draw of the saw motor Iodsfg E H Sepfx Aa Noht - Saw blade tension - Saw blade speed - Numerical display of head position. - IP55 switch handle for the manual 24-V cycle. - Complete program for all special cutting cycles. - Identification of other specialised cutting cycles for special applications. - Newest generation hydraulic control unit, highly efficient with low energy consumption. - Large work surface with turntable on roller bearings, 265 mm with preloaded thrust bearings. - Dual band speed (36/72 m/min) with control system. - Prepared for electronic inverter installation for stepless band speed adjustment from 20 to 90 m/min. - Saw bow stroke programmable directly from control panel to suit the material being cut. - Clamping device laterally adjustable to the left and right, with quick-release vice. - Manual band tensioning control with on-screen display via electronic transducer. - Base with retractable coolant tray. - Electric coolant pump for saw blade cooling and lubrication. - Prepared for installation of minimal saw blade lubrication kit (optional), alongside the standard emulsion oil lubrication system. - Swarf removal brush. - Machine is suitable for pallet truck transport. - Length stop for repeat cuts. - Material support arm with roller for loading table attachment. - Bimetal saw band for solid and profile material. - Tools and operating instructions in the respective user language.

Kondisi: baru, MEP SHARK 282 SXI evo [Semi-Automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36/72 m/min. Cutting capacity 0°: 250 / 220x220 / 280x220 Cutting capacity 45° right: 230 / 200x200 / 220x200 Cutting capacity 45° left: 200 / 170x170 / 200x140 Cutting capacity 60° right: 120 / 80x80 / 140x80 Cutting capacity 60° left: Description: Electrohydraulic semi-automatic bandsaw SHARK 282 SXI EVO featuring semi-automatic dynamic and manual operation, equipped with an MEP-28 control for mitre cuts from 45° right up to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – saw head descends for cutting – motor stops – saw head returns – vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand switch). Features: - New centralised control panel on an articulated arm for easy access from any working position. - Low voltage control unit: Polycarbonate membrane keyboard with thermoformed raised keys and actuation confirmation signal. - Display for: * Diagnostics (messages in the user’s language) * Alarms (alarm cause descriptions) * Status of inputs and outputs * Cut counter * Cut duration * Saw blade motor amperage * Blade tension * Blade speed * Numeric display of head position. - IP55 manual 24V cycle lever. - Full program of special cutting cycles. - Ability to determine additional special cutting cycles for specific applications. - Latest generation hydraulic control unit, highly powerful and energy efficient. - Large working area with turntable on roller bearing; 265 mm with pre-loaded thrust bearing, mounted. - Two blade speeds (36/72 m/min.) via control system. - Prepared for electronic inverter installation for stepless adjustment of blade speed from 20 to 90 m/min. - Saw bow stroke is programmable directly from the control panel, adaptable to cutting material. - Clamping device movable left and right, with quick-release vice. - Manual blade tension control, indicated on-screen via electronic transducer. - Machine base with pull-out coolant tray. - Electric coolant pump for blade cooling and lubrication. - Prepared for installation of minimum quantity lubrication system for the saw blade (optional), in addition to conventional emulsion oil lubrication supplied as standard. - Chip removal brush. - Machine designed for pallet truck transport. - Length stop for repeated cuts of equal length. Ijdpfscgbq Iex Aa Neht - Material support arm with roller for attaching loading table. - Bi-metal saw blade for solid and profile materials. - Tools and operating manual in the respective user’s language. For further technical data, please refer to the attached PDF document.

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vise opening: 285 mm Ihedpfoxaa S Rox Aa Not Blade speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx. 460 kg Space requirement approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for full function management * Front right, rotatable - Choice of manual or automatic bow descent * Infinitely variable adjustment of bow lowering speed - Carbide blade guides - Hydraulic blade tensioning with digital value display - 2 x blade speeds - 1 x bi-metal saw blade - 1 x angle stop - Chip removal brush - Machine base with forklift pockets - Operating instructions in German Semi-automatic operation: - Electro-hydraulic vise clamping - Electro-hydraulic bow descent - Electro-hydraulic bow lift - Electro-hydraulic vise opening SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing system

Kondisi: baru, Cutting diameter: 250 mm Cutting capacity at 90 degrees, flat: 280 x 220 mm Cutting capacity at 90 degrees, square: 220 x 220 mm Cutting capacity at 45 degrees, flat: 220 x 200 mm Cutting capacity at 45 degrees, round: 230 mm Cutting capacity at 45 degrees, square: 200 x 200 mm Cutting capacity at 60 degrees, flat: 140 x 100 mm Cutting capacity at 60 degrees, square: 100 x 100 mm Cutting capacity at 60 degrees, round: 150 mm Vice width: 285 mm Cutting speed range: 36/72 m/min Saw band dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic bandsaw (INDUSTRIAL) - With mitre cuts from 45° to the right up to 60° to the left * Mitre adjustment via a large rotary table - MEP microprocessor control EVO for managing all functions * Swivel-mounted, located front right - Choice of manual or automatic lowering of the saw frame * Infinitely variable adjustment of the saw frame descent - Saw band guide made from hard metal plates - Hydraulic saw blade tensioning - incl. digital value display Ihsdsxaatbepfx Aa Nst - 2x saw band speeds - 1x bi-metal saw band - Coolant device - 1x angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Operation in semi-automatic mode: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw frame - Electro-hydraulic raising of the saw frame - Electro-hydraulic opening of the vice