Mobil pemadam kebakaran

Mercedes-Benz 809 fire ladder truck

Kondisi: bekas, Tahun pembuatan: 2001, Timber dimensions to be processed: Input lengths min/max: 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max: 40 - 300 mm Input thicknesses min/max: 15 - 120 mm Gedpfow Sy T Hsx Abhotu Maximum timber cross-section: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw, min./max.: 510 – 2800 mm Special application: Cutting blocks, length min/max: 100 – 200 mm (Note: Multiple block lengths in new sorting; blocks are transported to the end of the sorting line and fall into customer-supplied mesh boxes) Cut-off/trimming tolerance: +/- 0.8 – 1.5 mm (for timber with minimal resin content and even surface. Tolerance up to 1m fixed length max.; tolerance for longer parts up to 2.5m). Thickness tolerance: +/- 3 mm Curvature of timbers in any direction: max. 10 mm per meter length Timber species: Softwood or hardwood System performance: Feed speed: steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 sec To attain the practical daily capacity, effectiveness factors dependent on the customer’s production conditions must be considered. Infeed height and saw: 900 mm (To be mounted on customer-side platform, saw requires concrete base) Sorting height: 2000 mm Connection data: Total electrical connected load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Maximum voltage fluctuation: 5 % Compressed air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint color: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Non-driven support roller, front end in front of sheet metal table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera for detection of defect markings Pos. 4: Automatic contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version, with built-in waste chute, includes equipment package for large timber cross-sections Graphic input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control Processing capability: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on the outfeed conveyor Location: Nattheim

Kondisi: bekas, de-to-hu-it-lt-001 Gjdpfx Aew H Iv Tobhotu

Kondisi: bekas, Tahun pembuatan: 2004, WEINIG GRECON DOUBLE-END FINGER JOINTING LINE MOD. PJ 150/500 – CE – USED - Infeed wood length: 150 – 700 mm - Wood width: 40 – 150 mm - Wood thickness: 18 – 80 mm - Press length: 6100 mm Gtjdpfswry I Ejx Abhsu - Pressing force: 120 kN - Milling motor: 15 kW - Scoring saw: 5.5 kW - Year: 2004 CE

Kondisi: siap digunakan (bekas), Panel length: 3200 mm, panel width: 1000 mm, max. workpiece thickness: 38 mm, min. infeed length: 500 mm. Gtsdpem Habdefx Abheu

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, diameter mata gergaji: 450 mm, ketinggian potong (maks.): 100 mm, lebar pemotongan (maks.): 245 mm, tinggi kerja: 100 mm, jenis arus masuk: tiga fasa, – year of manufacture: 2001 – optimization Gtedpfxowtzrho Abheu – cross-cutting – the machine is equipped with additional tables, allowing a maximum cutting length of up to 6500 mm (currently set to 3400 mm) – 8 cutting lists TECHNICAL PARAMETERS: – max. cutting length: 6500 mm (currently 3400 mm) – min. element length: 300 mm – max. cutting height: 100 mm – max. cutting width: 245 mm – blade diameter: 450 mm – motor power: 9 kW – max. feed speed: 120 m/min – acceleration: 10 m/s2 – optimization by length and value – pneumatic material clamp – five ejectors – intelligently controlled waste chute – Vario speed system – total length: 17,500 mm – transport dimensions (L/W/H): 800 / 245 / 220 cm – weight: 3,500 kg

Kondisi: baik (bekas), Tahun pembuatan: 2006, de-1 Gtjdpfx Absxtxi Isheu

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Max. cutting width: 310 mm, chain width: 340 mm, engine power: 30 kW Godpfx Aswyagdsbhstu

Kondisi: sangat baik (bekas), jam operasional: 10 h, Fungsionalitas: berfungsi sepenuhnya, Automatic Grecon Dimter Ultra Finger Jointing Line The machine has undergone a complete overhaul. Specifications: Gtedpfx Absuddvajheu Tenoner: Saw Spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling Spindle: - Spindle diameter: Ø50 mm - Usable spindle length: 210 mm - Max. tool diameter: Ø250 mm–Ø150 mm - Spindle speed: 6,000 rpm - Cutter motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feeding Table: - Min. board length: 150 mm - Max. board length: 700 mm - Feed rate: Infinitely adjustable Dust Extraction: Chipper extraction nozzle diameter: Ø100 mm Cutter extraction nozzle diameter: Ø150 mm Extraction capacity (flow rate): approx. 2,400 m³/h Pneumatics: Operating pressure: 6 bar Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Jointing Press CONTI M 6/6000: Press: - Lamella width: 25–160 mm - Finished lamella length: approx. 6,000+15-50 mm - Pressing force: 3–7.5 T (3,000–7,500 daN) Crosscut Saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Dust Extraction: - Saw extraction nozzle diameter: Ø100 mm - Extraction capacity (flow rate): approx. 400 m³/h Pneumatics: - Operating pressure: 6 bar - Air requirement: approx. 2.5 m³/h at 6 bar (15 Nm³/h) Scope of Overhaul Work: 1. Cleaning of machine bodies and application of new paint 2. Replacement with new bearings on: main spindle of tenoner; saw spindle of the press; linear bearings on the tenoner table carriage guide; bearings on conveyor belts. 3. Installation of a new glue nozzle with 3.8 mm pitch on the tenoner body, assembly of a glue tank with safety valve; 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic hoses for cylinders, solenoid valves, and other pneumatic components in the machines; 7. Replacement of gears and double roller chain on the press’s belt-chain feeder. 8. Refurbishment of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic cylinders; replacement of worn solenoid valves with new ones. 10. Replacement with new operator panels with graphics on the tenoner control cabinet, press control cabinet, and auxiliary press control panel. 11. Replacement of buttons, indicator lights, and switches on control panels and control boxes. Replacement of terminal boxes with new ones. 12. Replacement of machine and press controlling PLCs, adaptation of the machine control program to user requirements 13. Installation of new frequency inverters on the press rollers and on the outfeed table pusher; 14. Overhaul of the electrical installation in the control cabinets, modernization, and drawing of the electrical diagram. 15. Installation of guards, mesh guards, necessary labels, safety stickers, manufacturer’s logo, and nameplates. 16. Replacement with new V-belts, inspection of pulleys, gear motors, and motors; 17. Replacement with new limit switches, inductive sensors, and photoelectric sensors (photo-cells) We specialize in finger jointing machines. Installation, commissioning, and operator training within Poland included in the price; in other countries, available at extra cost. We provide service and access to spare parts.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 183,87 kW (249,99 hp), jenis bahan bakar: diesel, konfigurasi gandar: 4x2, tipe perpindahan gigi: semi-otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2025, Perlengkapan: kantung udara, kunci diferensial, winch kabel,

Kondisi: sangat baik (bekas), 4-sided DOUBLE END PROFILING LINE currently set up for INTERIOR DOORS, Comprising the following machines: X10023A) CELASCHI driven roller conveyor for infeed Gtsdswzmbqjpfx Abhou X10023B) CELASCHI DOUBLE END PROFILER model TSA 3 B 480 A installed total power KW 65 X10023C) CELASCHI 90° transfer (L-shaped driven roller conveyors) X10023D) CELASCHI DOUBLE END PROFILER model TSA 2 B 360 installed total power KW 65