Sistem pembersihan - sistem pembersihan semprotan

Metalclean LT 100 Spritzreinigung

Kondisi: bekas, Tahun pembuatan: 1996, Grinding length: 600 mm Grinding width: 250 mm Workpiece height approx. 385 mm Clamping surface of table: 600 x 200 mm Table speed - stepless: 2 - 35 m/min Maximum table load: 250 kg Grinding wheel dimensions: ø 225 x 25 mm Grinding wheel bore: 50.8 mm Vertical feed, automatic: 0.001 - 0.099 mm Rapid vertical traverse: 600 mm/min Table cross feed, continuous: 10 - 1000 mm/min Rapid cross traverse: 1000 mm/min Gbjdot Tqrnspfx Adtog Total power requirement: 6 kVA Machine dimensions L x W x H: 2.65 x 1.70 x 2.28 m Accessories: Digital readout on Y and Z axes, magnetic chuck 600 x 200 mm, grinding wheel with flange, wheel dressing device, wet grinding system with paper band filter.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Cleaning System Type W 60 C Machine body, internal pipework, control cabinet and washing basket made of stainless steel Combination unit - rotary table system with removable turning device and small parts basket - Basket diameter, rotary table washing basket: 600 mm - Usable interior height: 370 mm - Basket load, rotary table washing basket: 100 kg - Usable interior height: 530 mm - Small parts basket dimensions: 375 x 220 x 200 mm Mesh size: 12 mm - Basket load, small parts basket: 20 kg Fully stainless steel construction Pumps and external pipework/fittings Configured for operation with liquids up to a density of 1.3 via reinforced pump with frequency converter Chip/particle filter with bath cover plate Eco-rinse (loss rinse) for minimal water consumption Water supply via operator's mains with integrated machine-side hot water supply Gbedpfjq Ewgkox Adtjg Hot air drying 1 x 4 kW Oil skimmer Drainage system/floor flushing with pump and stainless steel pipework

Kondisi: bekas, Tahun pembuatan: 2002, Grinding diameter: 350 mm Grinding length: 1,000 mm Centre height: 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with 225 mm centre height Base Model: Kellenberger Kel-Varia UR175-1000 Kelco 120 Gbedpfxouxfuce Adtjg Grinding Head UR with T1-T2-T3 Standard Equipment: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - B-axis infinitely variable, high resolution - Marposs measurement system for tool setting - Active longitudinal positioning - GAP control at T1 and T2 from ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt-driven Options at Additional Cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (lead time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic leadscrew in X - New hydrostatic system with only one pump and accumulator for better energy efficiency - Monitoring of water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New state-of-the-art CNC cylindrical grinder control system with BEMA cylindrical grinding interface - Rebuilt control cabinet - New drive technology - Replacement of all electrical wiring, Berus pressure switch, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s equipment. Basic software - External and internal oscillation grinding - External and internal plunge grinding - External and internal plane oscillation grinding - External and internal plane plunge grinding - External and internal cone oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zeroing - Grinding wheel zeroing - Measurement of dressing diamonds - Two form diamonds - One form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - Three flat dressers - Corrections - Z-position measurement (probe required) - GAP touch detection (touch dressing device required) OPTIONS at additional cost: Software for profile plunge grinding: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single and multi-start external and internal thread grinding with threads dressed on the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Non-circular grinding software: Non-circular grinding requires the workpiece axis to be equipped with a high-resolution rotary encoder to operate the axis as a C-axis. The non-circular...

Kondisi: sangat baik (bekas), Hello, Godpsitcq Tefx Adtsbg We are offering used Erowa PalletSetW vices for sale. All units have been cleaned and inspected in-house. - ER-025895 Vice PalletSet W 40mm - ER-054922 Flat Vice 8mm PalletSet W - ER-055774 Vice 0-170mm A full functional test has also been conducted. The vices show minor signs of wear but are in very good technical condition. Individual purchase is possible. Spare parts are also available. If you have any questions, please do not hesitate to contact us.

Tahun pembuatan: 2011, Kondisi: diremaj di bengkel (bekas), Boschert EASY SHARP Tool Grinding Machine Configured for TRUMPF Tool System (AMADA system optional) Machine for punch tool maintenance with a cooling system and particularly powerful motor, making it suitable for use with diamond grinding wheels as well. Used machine – currently being overhauled Equipment for TRUMPF tool system up to size III Accessories: - Tool holder for flat and Whisper punches - Die holders for sizes I, II, and III - New corundum grinding wheel - Dressing diamond - Overhauled cooling system and machine base Technical data: - Grinding wheel diameter: 175 mm Gedpfx Asid I T Iedtebg - Height adjustment: 150 mm - Working area: 400 x 150 mm - Motor power: 2.2 kW - Motor speed: 2825 rpm Optional: Adapter for Amada system available Pictures similar

Kondisi: baru, en Gedpfefggcwex Adtjbg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tinggi pusat: 150 mm, panjang total: 620 mm, mechanics-all wear parts of the machine are replaced, including the X-axis adjustment spindle. All assemblies are brought to a like-new condition. After the overhaul, the machine is comparable to a new one. geometry-the machine is completely disassembled down to the guideways. Before restoring the geometry of the individual tables and assemblies, both X- and Z-axis guideways are hand-scraped and restored to an as-new condition. Upon completion, the machine receives a measurement protocol according to manufacturer specifications. painting-after the geometry restoration, the machine is prepared for repainting. All housings, tables, and the machine bed are stripped of old paint, cleaned, and repainted. hydraulics-the entire lubrication system, including lubrication unit, is replaced. The hydraulic unit is also completely overhauled. conventional internal cylindrical grinding machine TSCHUDIN HTG 610I equipment of the machine: technical data: center height: 150 mm distance between centers: 680 mm grinding length: 620 mm machine weight and required space: 2,500 kg // 2,340 x 1,445 x 1,900 mm equipment of the machine (standard): 1 pc. workpiece spindle head MK5 Gbodpfx Adeurw Uyotsg 1 pc. control panel 1 pc. mount for internal grinding spindle 1 pc. speed control device for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit optional: • digital 2-axis measuring system • freely adjustable speed (1–800 rpm) including soft start (higher speeds optional upon clarification of technical details) • separate low-speed setting for part alignment

Kondisi: bekas, Tahun pembuatan: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over support: 240 mm Turning length: 1100 mm Swing diameter in the gap: 600 mm Gjdpfx Aou Ix D Aedtsbg Spindle speed range: 24 - 900 rpm / 8 steps Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.3 x 0.9 x 1.3 m Equipment: Röhm 3-jaw chuck, Ø 200 mm 4-way tool post, swiveling 30° right/left 2x T-slots for copying attachment Live center

Tahun pembuatan: 2003, Kondisi: baik (bekas), Travel: 560 x 410 x 510 mm, table: 900 x 410 mm, 30-tool magazine, spindle: 12,000 rpm, chip conveyor. Gsdpeiwkhksfx Adtobg

Kondisi: siap digunakan (bekas), 100000 Liter Edelstahlbehälter, isoliert Gbjdpfx Asn E N N Eedtog Mit einer Heizschlange, die über die gesamte Behälterhöhe verläuft Durchmesser: 3,15 m Höhe: 16,50 m