Beli Brandt Optimat Kd 56 bekas (89)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, BRANDT OPTIMAT KD 68 CF Edge Bander – Year of manufacture: 2001 – Technical documentation (DTR) included TECHNICAL SPECIFICATIONS: The machine is designed for processing PVC/ABS edges Edging thickness up to 3 mm and wood strips up to 9 mm thick Pre-milling unit – panel pre-milling Tape pressure Glue pot for hot-melt granulate glue plus separate glue application roller Heated tape guide bar Guillotine – preliminary edge trimming 3 pressure rollers 2 flush cutting units with circular saws 2 profile milling units for edge shaping (radius cutters) Nodpohcitrjfx Agyowp Corner rounding unit (milling) Scraping units – for excess glue removal Polishing units Max. workpiece thickness: 50 mm Min. workpiece width: 60 mm Min. workpiece length: 160 mm Feed speed: 9.6 m/min Total power: 10.8 kW Extraction port diameter: 120 mm Dimensions (L/W/H): 5700 / 1200 / 2100 mm Weight: 2000 kg

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Nwsdpfevvkd Tjx Agyop

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Equipped with pre-melter unit for hot-melt adhesive granulate Adhesive reservoir located below the glue roller Application of glue to the workpiece via adhesive roller, both in co-rotating and counter-rotating mode Automatic edge magazine for roll material and fixed lengths Pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for compressing upper and lower glue joints Centrally adjustable upper pressure Central manual lubrication of chain track Control panel at machine infeed End trimming unit for front and rear edge overhang; highly precise linear guides 2 motors of 0.18 kW each Tilting range for straight and bevel trimming: 0–15 degrees Flush trimming unit top and bottom with vertical and horizontal tracing Tilting range 0–15 degrees with 2 milling motors with combination of straight/radius reversible knives Digital counters allow for quick and precise—i.e., repeatable—settings Two-point pneumatic adjustment of top and bottom milling motors Scraper unit for finishing, with horizontal and vertical tracing Extendable workpiece support up to 350 mm Integrated control system for contactless management of processing functions. Adjustable via keypad and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Nwodpfx Aexya Rtogyjp Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Availability: short-term Stock location: Flörsheim

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Brandt KDF 110 Optimat Ambition – only 1,150 operating hours Manufacturer: Brandt Model: KDF 110 Year of Manufacture: 2012 Machine No.: 0-261-20-6960 Control: Easy Control 10+ Contactless track control, feed-rate regulated, with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: - Chain Feed Track: Standard equipment with central lubrication for transport chain Nwodsxvirfjpfx Agysp - Upper Pressure Rollers/Product Guide: Central control, 2 roller tracks - Jointing Unit: 2 x 0.75 kW, 200 Hz; includes DIA jointing cutter set, manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness - Gluing Unit: A3 gluing unit for hotmelt glue, with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control - Pressure Zone: 1 powered roller and 2 idle rollers for optimal and consistent compaction - End Trimming Unit: 0.18 kW, 12,000 rpm - Milling Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotating, 3-position adjustment for chamfer/radius (R2), overlap, and straight; max. 3 mm edge thickness with Siko counter - Profile Scraper: Max. 3 mm edge thickness - Surface Scraper: Reversible knives Chain width: 80 mm Edgebanding material (roll): 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Min. workpiece width: 70 mm for 8-22 mm thickness; 120 mm for 23-40 mm thickness (depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Location: ex stock 54634 Bitburg - immediately available -

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Tipe: Mesin Edge Bander Satu Sisi Pabrikan: BRANDT Model: Optimat KDF 550 C Tahun: 2008 Lokasi: Lituania Ketentuan: apa adanya di lokasi Ketebalan papan: 60 mm Ketebalan edge: 8 mm Nwodpfx Agexwwb Rjyep Kecepatan feed: 11 m/menit Dimensi (P x L x T): 5860,0 × 1560,0 × 230,0 mm Bobot: 2600 kg Kecepatan feed: 11 m/menit Ketebalan benda kerja: 8 – 60 mm / ketebalan edge: 0,4 – 8 mm / tinggi kerja: 950 mm Catu daya listrik: 400 V – 3 fase – 50 Hz / tekanan pneumatik: 6 bar / tingkat kebisingan: 80…87 dB(A) Diameter ekstraksi: 1 × 120 mm / 2 × 100 mm / jarak antar rol: maks. 3.0 × 45 mm / 0.8 × 65 mm

Kondisi: bekas, nomor mesin/kendaraan: 007517, Type of edge applied: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing cutter: yes Multi-function unit: yes Top trimming unit: yes Max. feed speed: 18 m/min Nwsdpfx Ajwuz E Rjgysp Maximum panel thickness: 60 mm Number of working units: 9

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, Mesin Lem Pinggir Kuper Optimat KDF 660 – bekas, siap demonstrasi Mesin lem pinggir bekas Kuper Optimat KDF 660 berada dalam kondisi baik dan saat ini terhubung ke listrik, sehingga dapat didemonstrasikan di lokasi. Detail: Nwsdpfx Agexu Iafoyop Model: Kuper Optimat KDF 660 Kondisi: bekas, berfungsi dengan baik Mesin tersambung dan dapat diuji Layanan: Pengeluaran dan pemuatan mesin dapat diatur sesuai permintaan. Jika Anda berminat atau ingin menjadwalkan kunjungan, silakan hubungi kami!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, de Nwsdpfxew Uakqe Agyjp

Kondisi: bekas, Tahun pembuatan: 2014, Used machine Single-sided edgebanding machine Brandt Optimat KDF 220 C (Ambition 1220 FC) Year of manufacture: 2014 Machine number: 0-261-20-7913 Fixed fence side right Infeed fence adjustable manually Feed speed: 11 m/min Max. feed speed with contour trimming: 11 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Workpiece and edge parameters: Minimum workpiece width: - With workpiece thickness 8-22 mm: 70 mm - With workpiece thickness 23-60 mm: 120 mm Workpiece overhang: 38 mm Workpiece thickness: 8 - 60 mm Max. edge height = workpiece height + 5 mm Edgebanding material (roll): 0.4 - 3 mm Max. cross-section for edge material: - PVC: 135 mm² - Veneer: 100 mm² Max. roll diameter: 830 mm Edgebanding material (strips): 0.4 - 3 mm Max. cross-section for edge material (strips): 165 mm² Edge thickness up to 6 mm possible by modifying the pressure zone Aggregate configuration: - Jointing cutter unit: 2 x 2.2 kW 200 Hz (with/against feed direction) - Gluing unit A3 with workpiece preheating - End trimming unit, chamfer/straight: 2 x 0.18 kW - Milling unit: 2 x 0.27 kW (against feed direction) - Contour trimming unit (corner copying): 1 x 0.35 kW WD 40 Nwodpfx Agexx D D Ueyop - Profile scraper with quick-change heads - Glue joint scraper 5820 Control system: Easytouch Dimensions: approx. 4280 x 1300 x 1170 mm Weight: approx. 1400 kg Availability: short notice Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total connected load: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double upper pressure for workpiece stability Electronic thickness adjustment Feed frequency inverter Automatic lubrication of feed chain Automatic motor calibration Touchscreen control system Emulsion spray at both infeed and outfeed Edge preheating Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized cutting depth adjustment Gluing unit Application of glue or hot air Heated coating roller Quick-change of complete unit Automatic positioning via motor 3 pressure rollers Edging speed: 14 m/min End trimming unit Double-motor unit with automatic tilting Tilting up to 15° THK prismatic guideways Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Nsdpfjv Szt Dsx Agyowp Automatic tool position change via servomotor Electromagnetic horizontal movement Vertically hydraulically damped movement

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-261-07-2126, ketebalan tepi (maks.): 8 mm, tinggi kerja: 950 mm, lebar benda kerja (maks.): 60 mm, panjang benda kerja (maks.): 4.760 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Machine type: KDN 530 C Machine length: 4,760 mm Connected load: 6 kW Weight: 1,900 kg Extraction diameter: 2 x 100 mm Working area Feed speed: 11 m/min (optional: 14 m/min) Workpiece thickness: 8 – 60 mm Edge thickness: 0.4 – 8 mm Roll separation: max. 3.0 x 45 / 0.8 x 65 mm Working height: 950 mm MACHINE DETAILS Machine dimensions (W x H): 1,560 x 2,300 mm Voltage: 400 V, 3 ph, 50 Hz Njdpfeu Tur Rsx Agyewp Pneumatic operating pressure: 6 bar Noise emission value: 80–87 dB(A)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Diese BRANDT Optimat KDF 550 wurde 2008 hergestellt. Sie verfügt über eine Maschinenlänge von 5.860 mm, einen Leistungsbedarf von 11,5 kW und ein Gewicht von 2.600 kg. Sie eignet sich für Werkstückdicken von 8 bis 60 mm sowie für Kantenstärken von 0,4 bis 8 mm und ist damit ideal für präzise Kantenanleimarbeiten. Nutzen Sie die Gelegenheit, diese BRANDT Optimat KDF 550 Kantenanleimmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche: Njdpfx Aswug Uwsgyswp Kantenanleimen.

Kondisi: bekas, Tahun pembuatan: 2006, Used machine Year of manufacture: 2006 Features and technical data: - Equipped with a gluing unit for hot-melt adhesive granulate - Capable of processing PU adhesive granulate, in compliance with adhesive processing guidelines - Adhesive reservoir below the glue roller - Adhesive application to the workpiece via glue roller in both co-rotating and counter-rotating directions - With contact heating shoe for pre-heating the workpiece - Automatic edge magazine for coil material and fixed lengths - Pressure zone with pneumatically driven main pressure roller and special follow-up pressure rollers to compress the upper and lower glue joints - Centrally adjustable upper pressure - Central manual chain track lubrication - Control panel at machine infeed - End trimming unit: - For trimming excess edging at front and rear; highly precise linear guide - 2 motors, each 0.18 kW - Swivel range for straight and chamfered cuts 0-15 degrees - Flush trimming unit: - Top and bottom with vertical and horizontal tracing - Swivel range 0-15 degrees with 2 milling motors with reversible cutting heads for straight/radius - Digital counters allow quick and precise, i.e., repeatable settings - Two-point pneumatic adjustment of upper and lower milling motors - Scraper unit for finishing with horizontal/vertical tracing - Workpiece support extendable to 350 mm - Integrated feed control for contactless control of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8 – 50 mm - Edge thickness: 0.4 – 3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3,150 mm Weight: approx. 750 kg Availability: short notice Nwjdpfx Aowkbd Eegysp Storage location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Nwsdpfx Agevvkfwoyjp

Tahun pembuatan: 2004, Kondisi: belum diuji (bekas), Brandt Optimat mesin pemangkas pinggir dengan pemotong tepi. Dibeli bekas oleh kami untuk lini produk yang tidak jadi diluncurkan. Berfungsi saat dilepas, hampir tidak pernah digunakan. Nwsdexguhgjpfx Agyep

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, I am selling a fully equipped edge banding machine BRANDT Optimat KDF 220 C, year of manufacture 2014: Configuration: - Manually adjustable infeed fence - Manually adjustable pre-milling unit - Edge banding with EVA glue / PUR glue possible - Manually adjustable pressure zone for workpiece feed Nedpfx Asu N T Ewegyswp - Pneumatically adjustable end trimming saws - Manually adjustable top and bottom radius milling units - Manually adjustable single-motor contour trimming unit - Pneumatically selectable R2 radius scraper (R1 set included) - Control panel Servo-motor adjustable working height Material height: 8-50 mm Edge material thickness: 0.4-3 mm Feed speed: 10 m/min Total length including feed table: 4150 mm Total weight: 1320 kg Very good condition, fully functional! Including full documentation and CE certification. Available immediately.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C-261-04-2523, kecepatan pemakanan sumbu X: 9.000 m/menit, diameter mata gergaji: 100 mm, kecepatan rotasi (maks.): 12.000 rpm, The submission of a bid obligates the buyer to collect the item by the deadline, no later than 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, edge trimmings, roll material Feed rate: 9 m/min Edge material thickness: 0.4–3.0 mm Lipping thickness: 0.4–3.0 mm Edge material height: 55 mm Roll diameter: 800 mm Speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction connection Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Roll material Max. band cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Edge Gluing Unit Speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trimming Unit Speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling heads Ø 50 × 12 × 16 mm, z = 4 Combination tools, r = 3 mm: 2 × Trimmers Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Nwsdpfx Ajxhgk Asgysp Frequency: 50 Hz Fuse protection: 16 A Auxiliary voltage: 24 V

Kondisi: sangat baik (bekas), Mesin pengeleman Kap mesin Dua mata router lurus Dua mata router pembulatan Nwjdpfxexdy Slj Agyjp

Kondisi: bekas, Tahun pembuatan: 1985, Edge thickness 0.4 - 12 mm Workpiece thickness 10 - 55 mm Workpiece length min. 160 mm Workpiece width min. 65 mm Feed rate 13 m/min Pneumatic connection 7 bar Total length 5220 mm Weight 1950 kg Heated glue pot with Quickmelt hot-melt adhesive granulate Glue roller rotation for synchronous and counter rotation Edge magazine for PVC roll goods and strip edging Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at the machine infeed All units are track-controlled – i.e., no workpiece-controlled limit switches required End trimming Milling combination: bevel milling/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with bevel cutter) with pneumatic adjustment Scraper – with pneumatic adjustment Buffing Central lubrication for chain track Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with error indication Nedpfoc Tmygsx Agyewp Infrared heating element CE compliant Note regarding used machines: • Technical data subject to change and prior sale. • Prices stated are ex works – loading included! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty or guarantee claims. Buyers are welcome to inspect machines at their current location. • Special agreements are only valid if made in writing. (Inquiries will only be answered if you provide your address and telephone number!)

Kondisi: baik (bekas), Tahun pembuatan: 2008, nomor mesin/kendaraan: 0-260-20-1170, Kantfräs & kap Brandt Modell: Optimat FTK 130 Nr: 0-260-20-1170 Årsmodell: 2008 FTK 130 har tagits fram som ett komplement till kantlistmaskiner. Den huvudsakliga användningen för FTK 130 är formade arbetsstycken, där både invändiga och utvändiga radier kan bearbetas. Även raka arbetsstycken kan enkelt bearbetas. Trimteknologi för formade arbetsstycken: För mindre verkstäder erbjuder FTK 130 en flexibel och kostnadseffektiv lösning för deras kap- och trimbehov. För att bearbeta både invändiga och utvändiga former är trimmotorerna vertikalt monterade. Fräs- och kapenheter för samtidig övre och nedre radie-/rentrimning av överskjutande kantlistmaterial på arbetsstycken med raka kanter samt på rundade arbetsstycken med inre och yttre radier. Kapsats för exakt kapning av överflödigt listmaterial i början och slutet av arbetsstycket, längsgående med arbetsstyckets tryckriktning. Teknisk information: Fräsenhet Arbetsstyckets tjocklek: ca 12-55 mm Min. arbetsstyckesbredd: ca 30 mm Min. inre radie: ca 35 mm Max. kantlisttjocklek: ca 3 mm Fräsverktyg: 2xWPL radiefräs r=3, diameter 67x21x16 mm Fräsmotorer: 11 000 v/min Nwsdoq Ehpaopfx Agyep Kapenhet Arbetsstyckets tjocklek: 12-55 mm Max. kantlisttjocklek: 3 mm Sågbladsdiameter: 100 mm Sågbredd: 3 mm Centrumhål: 36 mm Tryckluft: 6 bar, anslutning 1/2", ca 2000 PA Luftförbrukning per slag: ca 10 NL Utsugsdiameter: 80 mm, 510 m³/h, lufthastighet 28 m/sek Elanslutning: 400 volt, 2,5 kW, 50 Hz, 3-fas, 16A Mått: 1130x765x1480 mm (LxBxH) Vikt: 320 kg Lager nr: 2001877BXA

Kondisi: bekas, Tahun pembuatan: 2000, nomor mesin/kendaraan: 0-260-06-0228, Foot operation Njdpfxsigadlj Agyowp 1200 x 800 mm Extraction nozzle 80 mm Pneumatic connection Cable + plug 16 A 1 set of operating tools 1 set of sensing rollers

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, I am selling a fully equipped edge banding machine BRANDT Optimat KDF 440 C, year of manufacture 2015: Configuration: - Infeed fence adjustable via servomotor - Pre-milling unit manually adjustable - Edge banding with EVA adhesive / Airtec system Schugoma - Pressure zone for material adjustable manually - End trimming saws pneumatically adjustable Nwjdjwun Irepfx Agyep - Top and bottom radius trimming units adjustable via servomotor - Corner rounding unit (2-motor), manually adjustable - Radius scraper R2 pneumatically retractable - Flat scraper pneumatically retractable - Polishing brushes - Separator and cleaning spray device at infeed and outfeed ends - Control panel Working height adjustable via servomotor Material height: 8–60 mm Edge material thickness: 0.4–8 mm Feed speed: 11 m/min Total length including feed table: 5573 mm Total weight: 1,860 kg Only 592,198 metres glued. Very good condition, fully functional! Including complete documentation and CE certification. Available immediately.

Kondisi: bekas, Type: OPTIMAT F 13 Year of manufacture: 2001 Condition: Function tested, very good, used Njdpjud U Iyefx Agyjwp - Workpiece thickness: 16 to 55 mm - Minimum workpiece width: 30 mm - Minimum inner radius: 35 mm - Maximum edge thickness: 3 mm - 2 milling motors, 0.4 kW each - Extraction connection: 80 mm

Kondisi: sangat baik (bekas), Adhesive applicator Nwodjttu Riepfx Agysp Guillotine Crosscut saws Milling machine (or Router, depending on context) Scraper Polishing machine

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, ketebalan tepi (maks.): 3 mm, kecepatan rotasi (maks.): 10.960 rpm, Perlengkapan: Penandaan CE, de_en_001 Nwedpfxsxw Tugo Agyep