Pers hidrolik

Metallist P6326

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. Hjdpfx Asfxyhfja Nong The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Tahun pembuatan: 1979, en: Technical details: Pressing force: 250 t Ram stroke: 40–160 mm Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250x800x100 mm Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900x670x100 mm Clearance between uprights: 500x400 mm Total power requirement: 23 kW Hedpsu Nfinsfx Aa Nsng Machine weight approx.: 16.6 t Machine dimensions: 2.8x1.4x3.7 m Control cabinet dimensions (LxWxH): 1.15x0.6x2.1 m Drawing device: Ejector and blank holder force each 16 t Table with 4 parallel T-slots (1250x800x100 mm) Ram plate with 4 radial T-slots Accessories: - Steel plate 1170x860x80 mm

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, tekanan: 300 batang, kapasitas tangki oli: 220 l, ID43737 Jahr: 1991-1997 Pressen mit einer Kapazität von 60 bis 80 Tonnen Marke: Hydro-Presses 2 Stück mit 60 Tonnen Presskraft, Modell PH600 Hydraulikhub: 600 mm Maximale Hydraulikkraft: 60 Tonnen bei 300 bar 5 Stück mit 80 Tonnen Presskraft, Modell PH800 Hydraulikhub: 600 mm Maximale Hydraulikkraft: 80 Tonnen bei 300 bar Hjdpfxowhcmps Aa Njng

Kondisi: bekas, Tahun pembuatan: 1961, druck-025-t-technik Hnsdpfxexukpce Aa Neg

Kondisi: baru, Tahun pembuatan: 2019, Pressure: 110 t Stroke: 400 mm Machine weight approx.: 4.5 t Dimensions (L x W x H): approx. 1650 x 1150 x 2800 mm Hnedpfxsfxygto Aa Neg Return force: 11 t Total power requirement: 11 kW Max. working height: 500 mm Feed speed max.: 10 mm Pressing speed: 10 mm/sec Rapid traverse speed: 10 mm/sec Travel distance: 400 mm Ram plate: 600 x 500 mm Table plate: 800 x 700 mm Table cut-out: 150 x 150 mm Table height above floor approx.: 900 mm Oil tank: 250 l Monitor SIEMENS: 7 inch Side panels: €2,800 Siemens S7 1200: €4,800 Front and rear light barriers: €2,400

Kondisi: baik (bekas), Tahun pembuatan: 1982, Pressing force: max. 200 kN Safety distance: 100 mm Secondary stroke: max. 10 mm Motor power: 3 kW incl. accessories Hnjdoxr Ay Uopfx Aa Njg