Gergaji pita

MIOTAL S 225 G

Kondisi: baru, Tahun pembuatan: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials Two-speed drive motor allowing saw band speeds of 30 and 65 m/min Electromechanical saw band tension monitoring via microswitch When lifting the saw arm, the lowering cylinder locks in the upper position via solenoid valve – additional locking at the cylinder is therefore not required Saw arm inclined by 25°, resulting in increased saw blade service life Precise and robust band guides with adjustable carbide plates After completion of the cutting cycle, the saw band automatically stops in the lower end position Lowering of the saw arm by gravity or manually With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Kdsdpfx Aog U Uv Rocijn Machine data Saw band speed(s): 30 / 65 m/min Speed stages: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting capacities 0° round (pipe): 220 mm 0° round (solid): 120 mm 0° rectangular, flat (hollow section): 230 x 150 mm 0° bundle (pipe): 230 x 120 mm -45° round (pipe): 160 mm -45° round (solid): 85 mm -45° rectangular, flat (hollow section): 160 x 90 mm -60° round (pipe): 90 mm -60° round (solid): 55 mm -60° rectangular, flat (hollow section): 90 x 90 mm Item no.: 3680001 Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Cutting capacity at 90 degrees (round): 125 mm Cutting capacity at 90 degrees (square): 125 mm Ksdpeupw R Nsfx Acisdn Cutting capacity at 90 degrees (rectangular): 127 x 125 mm Saw blade dimensions: 1435 x 12.7 x 0.65 mm Blade speed: 38 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Dimensions (L x W x H): 720 x 380 x 450 mm Both straight and mitre cuts can be performed at angles between 45 and 90 degrees. With this metal band saw, you work not only precisely but also quickly: the blade speed can be variably adjusted between 38 and 80 metres per minute. With a weight of only 25 kilograms, the saw is suitable for mobile use.

Kondisi: bekas, Tahun pembuatan: 2022, Technical details: Cutting diameter: 128 mm Bandsaw blade length: 1640 x 13 mm Bandsaw blade width: 0.64 mm Cutting range at 90 degrees, round: 128 mm Cutting range at 90 degrees, flat: 100 x 150 mm Cutting range at 45 degrees, round: 90 mm Cutting range at 45 degrees, square: 90 x 75 mm Blade speed: 24 - 35 - 55 m/min Electrical connection: 220 V / Hz Total power requirement: 500 watts Machine weight approx.: 80 kg Machine dimensions (LxWxH) approx.: 0.95 x 0.52 x 1.1 m The machine is unused—as new, in its original packaging. The bandsaw is manually operated. Kdedju Nig Repfx Acijn Suitable for steel, cast iron, and non-ferrous metals. Workpiece clamping with vice jaws via handwheel, 1 fixed and 1 movable, clamping range 165 mm, swivel range 60°. Stop for length adjustment up to max. 85 mm. i.D.

Kondisi: baru, Tahun pembuatan: 2024, ketinggian potong (maks.): 150 mm, Rentang pemotongan baja bulat pada 45°: 108 mm, Rentang pemotongan baja bulat pada 90°: 108 mm, BERG+SCHMID Dual Mitre Bandsaw GBS 218 Eco AutoCut Cutting speed: 25–80 m/min • Mitre cutting left up to 60° • Suitable for cutting steel, stainless steel, and aluminum profiles • Quick-release vise with rapid clamping system • Integrated blade tension control Kjdpfot I R Edjx Acijdn • Carbide blade guides • Electric coolant system • Machine base (supplied disassembled) The AutoCut system includes: • Hydraulic cylinder, feed control, spring pack, and limit switch, allowing for three operating modes: 1. Automatic saw frame lowering via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid lowering of the saw frame from home position to the workpiece, then switching to normal cutting feed 3. Manual operation – hydraulic cylinder functions as a braking cylinder Blade dimensions: 2455 x 27 x 0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, and minimum quantity lubrication available on request! Delivery time: ex stock Waiblingen Beinstein

Kondisi: baru, Cutting diameter: 170 mm Bandsaw blade dimensions: 2080 x 20 x 0.9 mm Table height: 880 mm Cutting speed: 40 + 80 m/min Cutting capacity at 90° round: 170 mm Cutting capacity at 45° round: 125 mm Cutting area at 90° rectangular: 150 x 190 mm Cutting area at 45° rectangular: 95 x 120 mm Total power requirement: 1.1 kW Kdsdsg Trvrspfx Acisn Machine weight approx.: 0.24 t Dimensions (L x W x H): 870 x 1,550 x 1,740 mm This metal bandsaw is equipped with an enclosed worm gear drive. Additionally, it features hydraulic pressure regulation and a base frame rotatable by 45 degrees. Other features include emergency stop, a complete cooling system, the factory base frame, automatic shut-off, and a quick-release device.

Kondisi: baru, Tahun pembuatan: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control system: DT 15 Bending length: 3050 mm Distance between columns: 2600 mm Y-axis rapid speed: 160 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 140 mm/s Motorized crowning Table length: 630 mm Kdedpfsfifg Hsx Acien Table width: 154 mm Table height: 900 mm Stroke: 365 mm Throat depth: 410 mm 2 support arms 2 rear gauge fingers X-axis travel speed: 250 mm/s R-axis working speed (max.): 140 mm/s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminum) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motor as well as linear guide and ball screw Backgauge fingers with height adjustment (R-axis, manual) CE die holder system (upper dies) Front support arms for sheet metal, sliding (with T-slot and stops) Hydraulic blocks and valves in special design, according to worldwide standards Electrical equipment according to worldwide standards Options: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4-axis) CNC motorized crowning Motor power: 37 kW Oil tank capacity: 250 l Length: 4300 mm Width: 1820 mm Height: 3230 mm Weight: approx. 17,250 kg

Kondisi: baru, Tahun pembuatan: 2026, Ganz gleich, welche Schnittaufgabe Sie haben – die A700 ist die einzige Säge, die Sie jemals benötigen werden. Mit der größten Schnittkapazität ihrer Klasse und einem enormen Gehrungsbereich von ±75° ist sie für echte Hochgehrungsschnitte ausgelegt, ohne Kompromisse bei der Größe der zu schneidenden Aluminiumprofile einzugehen. Ideal auch für das Bündelschneiden mehrerer Profile gleichzeitig und hochpräzise. Hochgeschwindigkeits-Aluminiumverarbeitung mit präzise geregelten Bewegungsabläufen durch eine PLC-Steuerung. Pneumatisch betätigte Schutzhaube, die sich per Knopfdruck öffnet und schließt – für einen vollständig freien Zugang zum Sägetisch. Sicherheitsschalter, der die Säge beim Anheben der Haube deaktiviert. Optional CNC-gesteuerte Gehrungseinstellung der Säge mit Touchpad-Bedienung. • Ø700 mm Hartmetall-Kreissägeblatt mit 4 kW Antriebsmotor • Nach AS / NZS 4024:2014 Sicherheitsstandard, Zweihandbedienung beim Sägeschnitt • Überkopf-Schutzhaube mit Sicherheitstunneln, jeweils 900 mm beidseitig der Säge • Schutzhaube pneumatisch auf Knopfdruck anhebbar • Sicherheitsschalter schaltet den Sägebetrieb beim Anheben der Haube ab • 2x vertikale und optional 2x horizontale Spannzylinder mit einstellbarem Spannungsdruck • Gehrungsbereich ±75° mit Rastpunkten bei 0°, ±15°, ±22,5°, ±30°, ±45°, ±60°, ±75° • Dosier-Schmiersystem für das Sägeblatt • Luftdüse und LED-Innenbeleuchtung • 2× Ø100 mm Anschlussstutzen für Späneabsaugung • Optional 2,2 kW Späneabsauganlage • Optional automatisches Gehrungseinstellsystem Besonders geeignet für: • Serienfertigung von Aluminium • Herstellung von gehrungsverschweißten Aluminiumkonstruktionen • Herstellung von Fenstern und Türen • Fertigung von Rollläden, Jalousien und Möbel • Herstellung von einbaufertigen Aluminiumrahmen und -konstruktionen Ksdjmb U Tuepfx Aciodn • Produktion von Aluminiumfassaden

Kondisi: baru, Model designation Kdjdpfx Ajgvquwocion Shark 332-1 CCS

Kondisi: bekas, Tahun pembuatan: 2000, de-hu-001 Kjdeykb Hfepfx Acisdn

Kondisi: bekas, Mesin Frais Universal Merek: OPTIMUM Kdedjw Rlvqspfx Acisn Model: MT 100 Tahun produksi: 2018 – telah dicek bengkel No. mesin: J33021808035 Pemeriksaan geometris dengan protokol pengujian Perlengkapan: - Layar digital 3-sumbu DPA 2000 - Kepala frais vertikal SK 40 dengan ulir pengikat M 16 - Meja tetap 1.120 x 260 mm (alur-T: 14 mm) - Lampu mesin - Perangkat pendingin cairan - Pelumasan sentralis manual - Buku petunjuk pengoperasian Bekas, dijual apa adanya, tanpa garansi Mesin secara teknis sesuai dengan standar tahun produksinya.