Mesin frais kolom bergerak

MONTI M 20 - 2 TAVOLE

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), A CNC fixed-table milling and drilling center Bimatec Soraluce is available. Travel distances X/Y/Z: 2500mm/900mm/1600mm, spindle speed: 2000 rpm, spindle taper: ISO40/M16, tool stations: 30. Transport dimensions X/Y/Z: approx. 5300mm/3450mm/3500mm, weight: approx. 13,500kg, control unit: Heidenhain CNC 415, operating hours: 31,507 h. Includes fixed table, moving column, automatic indexing milling head, manual touch probe, coolant system, and filtration unit. Documentation is available. Inspection on site possible. Rodpfxsu T Rgwo Ad Rsr

Kondisi: baik (bekas), Tahun pembuatan: 2016, Abmessungen des Tisches: 3000 x 1700 mm Verfahrwege X/Y/Z: 3200 x 2100 x 920 mm Tischbelastung: 11.000 kg Abstand Spindelnase zu Tisch: 164 – 1084 mm Rodpfx Adewu Dlae Rjr Spindelaufnahme: DIN 50 Spindeldrehzahl: 6.000 U/min Werkzeugmagazin: 40 Plätze (ATC) Steuerung: Hurco WinMax 5 Späneförderer

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 12,000 mm y-travel 3,600 mm z-travel 1,500 mm Spindle speeds 3,000 rpm Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3,600 mm Cross (Z-axis): 1,500 mm Longitudinal (X-axis): 12,000 mm Guideway length: 14,700 mm Guideway width: 1,400 mm Lowest milling position of spindle nose measured from floor (head horizontal): 855 mm Rjdpfx Aexwdyged Ror Low column version 870x900x2,625 mm: 3,000 kg High column version 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Spindle taper: ISO 50 / DIN 69871-A Speeds: 11.7 : 231 : 3,000 rpm Feed range: 2–2,500 mm/min Rapid traverse X-axis: 12,000 mm/min Z/Y-axis: 15,000 mm/min Feed motor output X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Precision Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Compressed air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyor are not included in the scope of delivery. However, we can offer both used and new clamping plates and chip conveyors upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, x-axis 4000 mm y-axis 3500 mm Rsdpfxovwgmmo Ad Rer z-axis 1500 mm Control: SIEMENS 840 D w-axis 1500 mm Column clearance: 2500 mm Clamping surface: 3000 x 2000 mm Workpiece weight capacity: 10,000 kg Spindle speeds: 5-6,000 rpm Gear stages: 2 Drive power - milling spindle: 45 kW Distance spindle to clamping spindle: 3500 mm Spindle torque: 1,250 Nm Tool changer capacity: 200 positions Tool diameter: 135 / 250 mm Max. tool weight: 50 kg Max. tool length: 400 mm Tool holder: ISO SK-50 The portal milling machine is in very good condition. ADDITIONAL EQUIPMENT FOR DRILLING/MILLING Angle milling head yes Automatic tool clamping yes Ball screw drives yes Guideway covers yes Coolant system yes High pressure cooling system (internal coolant supply) yes Fully enclosed work area yes Portal machining center with tool changing system and second table plate.

Kondisi: bekas, Tahun pembuatan: 2014, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! MAIN TECHNICAL DATA Year of manufacture: 2014 Travel distances: Longitudinal (X): mm 3,000 Cross (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on the table surface: qty: 7 Size of T-slots: mm 22H12 Rsdpfx Aoygipaod Rer Reference slot: mm 22H7 Distance between slots: mm 140 Max. load capacity: kg 11,000 Paint finish: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Max. drive power: From 198 rpm kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Max. torque: Nm 935 Speed control: 3-stage (oil-cooled), with automatic switching Feeds: X, Y, and Z axis: mm/min 2 – 15,000 Max. rapid traverse: X, Y, and Z axis: mm/min 25,000 Max. feed force: X, Y, and Z axis: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor + 1,280mm) Height approx. (for Z= 1500mm): mm 3,800 Width approx. (for Y= 1200mm): mm 5,000 (with spacer 4,500mm) Weight: kg approx. 20,200 Connected load: kVA approx. 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head, diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & internal coolant supply (IKZ) RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this range are procured by us following a strict selection process and undergo a comprehensive inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are repaired professionally by our expert service team.

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Programmable 2-axis NC milling head, 2.5° Rjdswrzkzspfx Ad Ror - Coolant system The machine is sold without the platen table Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and a ball screw for the X-axis. Technical data: X-axis travel (longitudinal): 10,000 mm Y-axis travel (cross): 1,500 mm Z-axis travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed range (2-step): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main drive power (100% duty cycle): 37 kW Machine weight approx.: 39,300 kg Technical data, accessories, and machine description are not binding.

Tahun pembuatan: 2011, Kondisi: siap digunakan (bekas), - BEKAS - MESIN FRAIS CNC KOLOM BERJALAN DENGAN MEJA PUTAR DAN GESER JARAK GERAK MEMANJANG: 8000 mm JARAK GERAK MELINTANG: 1500 mm JARAK GERAK VERTIKAL: 2500 mm RAPID FEED L-T-V: 35 m/menit UKURAN MEJA: 2000 x 2000 mm GERAK MELINTANG MEJA: 1500 mm BEBAN MAKSIMUM: 15000 Kg KEPALA: SUMBU A/B OTOMATIS; KONTINU; ISO 50; 7000 rpm; 49 kW; 1180 Nm MAGAZIN PERKAKAS: TIPE RANTAI; 80 POSISI UNIT KONTROL: HEIDENHAIN iTNC 530 AKSESORIS: KONVEYOR SERPIHAN LOGAM; HANDWHEEL PORTABEL; PENGATUR PERKAKAS LASER CATATAN: DENGAN MEJA PUTAR 1500X1500 mm; BEBAN MAKSIMUM 15000 Kg Rodpfxjwl R Age Ad Rjr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20194, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 1.500 mm, daya: 49 kW (66,62 hp), Kekakuan tinggi untuk pemesinan tugas berat Redpfsx S Hgzjx Ad Rer Meja besar untuk benda kerja berukuran besar Kontrol CNC dengan HEIDENHAIN TNC 530 untuk operasi presisi Pengganti alat otomatis dengan 50 posisi Sistem pelumasan dan hidrolik terpusat

Kondisi: sangat baik (bekas), jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 2.600 mm, jarak gerak sumbu Z: 1.600 mm, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 24 m/menit, pergerakan cepat sumbu Z: 24 m/menit, kecepatan pemakanan sumbu X: 20 m/menit, laju pemakanan gandar Y: 24 m/menit, laju pemakanan sumbu Z: 24 m/menit, kecepatan spindel (maks.): 3.200 rpm, kecepatan rotasi (maks.): 3.200 rpm, rentang pivot: 360 °, tahun perombakan terakhir: 2022, pasokan pendingin: 16 batang, tinggi ejeksi: 1.250 mm, kapasitas tangki: 800 l, Technical Data Travelling paths • X-axis (bed): 8,000 mm • Y-axis (vertical): 2,600 mm • Z-axis (horizontal spindle head): 1,600 mm Control system • CNC control: Heidenhain iTNC 530 Feed rates • Y and Z axes steplessly adjustable: 2 – 24,000 mm/min • X axis steplessly adjustable: 2 – 20,000 mm/min Universal milling head in orthogonal design • Swivel range milling head holder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed: 3,200 rpm Chip conveyor • Discharge height above floor level: 1,250 mm • Task length: 8,000 mm • Task width: 350 mm Coolant system • Paper band filter unit o Tank capacity: 800 l o Pump pressure at the machine: 16 bar o Approx. 32 l/min Year of manufacture: 2005 • 2016: General overhaul of spindle head unit • 2022: General overhaul of milling head About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts supply, on-site service, machine overhauls, as well as control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization Rsdpfewfdaljx Ad Rsr _____ _____ _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used boring milling machine - used metal milling machine - used metal mill - used metal milling machine - used cnc mill - cnc milling machines - milling machine - large part machining - large workpiece machining - cnc large part machining - milling - shw - uf6 - uf 6 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 6 - UFZ 6 - UFZ6L - UFZ 6 L - Heidenhain - MBM milling machine - MBM machine - column milling machine

Kondisi: bekas, Tahun pembuatan: 2013, nomor mesin/kendaraan: 5279, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.600 mm, jarak gerak sumbu Z: 1.300 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 22 rpm, Year of manufacture: 2013 Control system: SIEMENS Sinumerik 840D pl Tool holder: HSK 100-A TRAVEL PATHS Horizontal (X-axis): 8,000 mm Vertical spindle slide (Y-axis): 1,600 mm Horizontal/Traverse spindle (Z-axis): 1,300 mm WIRELESS PROBE: m&h HSK 100 SIEMENS OPERATOR HANDHELD UNIT B-MPI RIDE-ALONG WORK PLATFORM 3-SIDED SPLASH AND CHIP GUARD WALL CHIP CONVEYOR CLAMPING PLATE Dimensions: Length: 10,000 mm, Width: 2,500 mm WASHING GUN IN THE WORK AREA REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2,000 l 2-CHANNEL COLLISION MONITORING SYSTEM 2 monitoring channels: – 1. Collision monitoring for orthogonal milling head (Channel 1) – 2. Collision monitoring for fork milling head (Channel 2) PENDULUM OPERATION, 3 WORKING AREAS MULTI-AXIS INTERPOLATION FOR FREE-FORM SURFACES (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATIONS For fork head, mounted on clamping plate – 10 tool positions – Maximum tool weight: 12.5 kg – Maximum tool length: 200 mm – Maximum tool diameter: 63 mm – Maximum tool diameter with free adjacent slot: 250 mm – Tool holder HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine: 48 Maximum tool diameter (full magazine): 125 mm Maximum tool diameter (with free adjacent slots): 250 mm Maximum tool length: 500 mm Maximum tool weight: 25 kg Maximum tool load torque: 40 Nm Tool holder: HSK 100-A HEAD CHANGE MAGAZINE 1 PIECE FORK HEAD WITH HIGH-FREQUENCY SPINDLE AUTOMATIC FORK HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE – High-frequency milling spindle – Integrated high-frequency spindle – Tool holder HSK – A 63 DIN 69893 – Main drive power: 20 kW at 100% duty cycle or 25 kW at 40% duty cycle – Speed range up to 20,000 rpm – Motor spindle bearings with lifetime grease lubrication – Sealed with air purge – Torque: 40 Nm at 100% duty cycle, 50 Nm at 40% duty cycle – Automatic tool clamping – Power transmission according to RPM-power diagram GMN HCS 170 – Technical data per datasheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN – Liquid-cooled milling head – Cast construction from GGG 60 – Milling head, automatically swiveling, 180 x 1 degree – The resulting positions can be accessed via CNC control, programmed, and executed – Repeatability at spindle nose: ±0.002 mm, positioning accuracy ±3 seconds – Tool holder: HSK 100-A – The milling spindle is equipped with a hydromechanical quick-change system – Tool clamping force: 45 kN – Internal coolant supply Form A-D – External coolant supply via shower ring Redpfx Aeu Sppwsd Rjr – Speed range: 22-4,000 rpm MAIN DRIVE Through a frequency-controlled liquid-cooled AC motor with 32 kW drive power at 100% duty cycle and 46 kW at 40% duty cycle. Direct power transmission WITHOUT gearbox, therefore no heating or wear of a gearbox. – 637 Nm torque at 100% duty cycle, 875 Nm at 40% duty cycle.