Moretto DGM 120 (2013)

Moretto DGM 120

Tahun pembuatan: 2015, Kondisi: bekas, en Guedsy Udkcepfx Aa Hjg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Electronic saw height adjustment Working area, square max.: 170x170 mm Working area, flat max.: 300x150 mm Working area, round max.: 200 mm Saw feed: 0 – 40 mm/s, stepless adjustment Cut length: 5-950 mm (9999 mm with multiple stroke) Feed speed max.: 500 mm/s Weight approx. 1,900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After a comprehensive retrofit, the machine is in like-new condition both technically and visually. Thanks to its features and robust design, it is highly efficient and suitable for a wide range of applications. The programmed HMI control enables easy and highly profitable operation. The soundproof enclosure minimizes noise emissions. The machine is completely overhauled in our facility according to customer requirements. The overhaul includes, among others, the following upgrades: - Conversion to Siemens S7 PLC - Upgrade to Siemens HMI operator interface - Replacement of the ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of wear parts - Refurbishment of the enclosure Gsdpjuiy Hrofx Aa Hjug Additional features: - Soundproof enclosure - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor and wear parts are excluded from the warranty. Options: - Multiple clamping device for parallel sawing of several workpieces - Flat magazine for automatic loading of material up to 6 m in length - Roller conveyors for raw material - Reinforced motor 18.0 kW (frequency controlled) - Delivery and installation at your site - Training for your personnel

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Seri CNC Fanuc Diameter maksimum benda kerja yang dapat diputar pada meja kerja mm 780 Diameter maksimum benda kerja yang dapat diputar pada kepala geser mm 630 Diameter maksimum benda kerja yang dapat dikerjakan mm 406 Panjang maksimum benda kerja yang dapat dikerjakan mm 520 Diameter batang mm 65 Jenis poros utama ASA A2-6 Diameter lubang poros utama mm 52 Kecepatan putar poros utama putaran/menit 5000 Daya motor poros utama kW 18,5 Diameter lubang poros belakang mm 45 Jenis poros belakang ASA A2-5 Collet Bellegrandi pada poros utama dan poros belakang + 2 collet yang dapat mengencangkan sendiri Langkah sumbu X mm 260 Langkah sumbu Z mm 590 Langkah sumbu Y mm +102 -51 Langkah sumbu B mm 590 Kecepatan gerakan cepat sumbu X/Z/B m/menit 30 Kecepatan gerakan cepat sumbu Y m/menit 10 Jenis turret BMT Jumlah posisi pada turret No. 12 Kecepatan putar alat potong bermotor putaran/menit 5000 Dimensi mm 3530x1863 T=2163 Berat kg 5900 No. 10 dudukan alat potong bermotor Guedpsyiu Dnefx Aa Hjg

Kondisi: bekas, Machine designation: Dry Bulk Feeder Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year of manufacture: Unknown Speed: Mixer speed: 5.6 rpm Capacity: 75 liters Drive motor: 0.25 kW - Mixer drive 0.25 kW Dimensions: Length 800 mm x Width 700 mm x Height 1200 mm Empty weight: 100 kg Technical documentation: No Guedsiv Ic Eepfx Aa Heg Note: Mixer drive 0.25 kW, speed 5.6 rpm Condition: Used Price: On request

Kondisi: baru, *TECHNICAL SPECIFICATION: Heating capacity hot circuit: 48 kW Heating capacity cold circuit: 12 kW Cooling capacity hot circuit: 42 kW Cooling capacity cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 l at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions LxWxH: 1,395 x 753 x 1,180 mm Weight approx. 580 kg *FEATURES HIGHLIGHTS: -Control and regulation via PLC with touch screen -Heating via Incolloy stainless steel tubular heaters -Heating control via solid state relay -Control cabinet IP54 with forced ventilation -Electrical wiring on terminal blocks -Potential-free input for signal to switch between hot/cold (front door) -Potential-free contact for collective alarm on 3-pin connector (front door) -Temperature control unit with heating and cooling circuit, designed for connection to a valve station for rapid switching between hot and cold circuits -Temperature-controlled feeding of return water -Level monitoring with automatic level compensation -Dirt filter in cooling water inlet and in the return of the circulation system -Separate automatic filling with dirt trap -Flow measurement based on differential pressure in both circuits -Heating element surface monitoring via temperature sensor -System pressure regulation, required compressed air connection: 6 to 8 bar -Booster pump type DS 360 for make-up water supply -Corrosion-resistant components (stainless steel, brass) -Unit mounted on castors and ready for connection *OPTIONS: -EcoTemp system for intermittent operation -Connection for external temperature sensor PT100 or type J/K -Remote touch screen with 15 m cable Guedpfx Aajg Ey Ufj Hog Visit our website for more details or for other performance classes. *This unit complies with the European directives. Other regulations and standards are only fulfilled if indicated in the order confirmation. This technical specification reflects the standard equipment; customer-specific options differing from the standard will be specified in offers or order confirmations.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Perangkat Pengangkut dan Dosing Merek: A. Tschritter Tipe: WC 100 Gueded Twgcopfx Aa Heg Tahun: 2004

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Perlengkapan: Pelat tipe tersedia, Volumetric Dosing Systems – Granulate, Powder, and Regrind We offer a range of fully operational volumetric dosing systems, ideally suited for conveying granulate, powder, and regrind materials. • Various models available: We have different dosing units in stock, which can be adapted to suit your material and application requirements. • Testing option: Upon request, we can test the dosing units with your specific material to ensure they meet your requirements. • Reliable performance: All units have been tested and are ready for immediate operation. Contact us, and we will help you find the right dosing system for your needs. We are happy to answer any questions or provide advice! Guodpfx Aaovmylzo Hsg

Tahun pembuatan: 2000, Kondisi: bekas, Used filterless suction conveying unit Gujdpsdlpynofx Aa Hjg

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), A complete Artec recycling and extrusion plant is available. Materials: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145 mm, L/D ratio: 42, extrusion output: 700 kg/h, degassing: double vented, drive power shredder/extruder/screen changer: 55 kW/609 kW/55 kW. Overall plant dimensions (L/W/H): approx. 20,700 mm/3,000 mm/3,400 mm. Control system: Siemens. Includes shredder, conveyor units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot-cut pelletizer, bag filling and weighing station, and bagging station. Documentation is available. On-site inspection is possible. Gujdpfov Ip S Hex Aa Hsg

Kondisi: baru, Cutting range at 90°: round 305 mm Cutting range at 90°: square 260 mm Cutting range at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 – 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirements approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made in one casting, exceptionally quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent access to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cutting! • CNC control for optimized workflows Entry of various parameters such as quantities and material lengths, automatic groove calculation • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. 1 sawing program with multiple section lengths • Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm. Includes: - Micro-spray device Gusdpfx Aaoupw R Aj Hjg - Leveling elements