Beli 4-Sumbu Cnc Penggilingan Mesin bekas (109.690)

Kondisi: baik (bekas), Tahun pembuatan: 2003, Ref.-No.: 10454 Produsen: DOOSAN Tipe: DAEWOO PUMA 300 MSC Bsdpfxeym Nbve Aa Tewi Tahun pembuatan: 2003 Jenis kontrol: CNC Kontrol: FANUC 18i-TB Lokasi gudang: Halberstadt Negara asal: Korea Selatan No. mesin: 0MS19XX Kecepatan putar: 4500 rpm Besar lubang bar: 62 mm Panjang pemesinan: 595 mm Jumlah posisi turret: 12 unit Informasi tambahan: - 4 sumbu (X/Z/C/B) - Spindle belakang - Stasiun alat penggerak - Sistem pengambilan benda jadi - Konveyor - Konveyor serbuk - Sistem pendingin Powercool - Bar feeder LNS Quickload Servo 3 - Pemegang alat - Pemegang penjepit - Collet Mesin dapat diperiksa dalam kondisi operasi sesuai kesepakatan.

Kondisi: bekas, 4-axis CNC drilling and milling machine IXION type 30 CNC W VMC, machining center Year of manufacture: approx. 1997, machine overhauled in 2020 Travel distances X: 600 mm Y: 350 mm Z: 600 mm Table size: 800 x 400 mm T-slot spacing: 75 mm Table load capacity: 300 kg Spindle taper: SK 40 (retention knob DIN 69872 A) Spindle speed: 20-5000 rpm Spindle torque: max. 150 Nm Distance spindle nose to table: max. 660 mm Feed rate X, Y and Z: 0 - 5000 mm/min, stepless Rapid traverse X, Y and Z: 15000 mm/min Tool change time: approx. 5 sec Chip-to-chip time: approx. 7.5 sec Milling capacity in St 60: 150 ccm/min Drilling capacity in St 60: 35 mm Tapping capacity in St 60: M24 Spindle drive power: 5 kW (10 kW at 25% duty cycle) Power supply: 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display Bedpfxju Tln Ne Aa Tswi - Electronic handwheel - RS 232 interface - 12-position automatic tool changer - Hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, 3-jaw chuck Ø 200 mm Speed approx. 25 rpm, gear ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Control cabinet fixed to the machine Transport dimensions: Length 320 cm x Width 230 cm x Height 300 cm Machine footprint with chip conveyor (L x W x H): 3200 x 3100 x 3000 mm Machine weight: 3,100 kg Chip conveyor weight: approx. 200 kg Good condition.

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 1 rpm, gores kuas bulu: 60 mm, For sale is a milling machine of the brand Kunzmann, model WF 4/3. The machine is fully functional and ready for immediate use. Technical data: • Control system: Heidenhain TNC 124 • Year of manufacture: 1996 • Working area, longitudinal X-axis: 400 mm • Transverse Y-axis: 350 mm • Vertical Z-axis: 400 mm • Fixed angle table, clamping surface: 650 x 350 mm • Maximum table load: 250 kg • Main drive AC motor: 5.5 kW • Feed drives: AC individual drives • Infinitely variable feed: 0 - 2,000 mm/min • Tool holder: SK 40 • Spindle speed range: 1–4,000 rpm • Quill, vertical travel: 60 mm • Swivel range, vertical milling head: ±90° • Tool clamping: hydraulic • Linear direct distance-coded measuring systems, resolution 0.001 mm • Positioning deviation Pmax according to VDI/DGQ 3441: 0.015 mm • Operating voltage: 400 Volt, 50 Hz • Total connected load: approx. 12 kVA • Weight: approx. 1,750 kg On request, transport and loading can be organized Europe-wide at extra charge. Prices are subject to VAT. Inspection by appointment is possible. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Bwodpfx Aaovftrxj Tei For further information or contact options, please visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 1994, jarak pergerakan sumbu X: 700 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 500 mm, For sale is a Deckel Mori portal machining center, model 70 V. The machining center is immediately operational and fully functional. Technical data: Year of manufacture: 1994 Control: Grundig Dialog 112 X-axis travel: 700 mm Y-axis travel: 550 mm Z-axis travel: 500 mm Tool holder: SK 40 Motor: Brushless AC servo Drive type: Stepless, 0-8000 rpm Feed rate: Stepless, up to 10,000 mm/min Table size: 900 x 550 mm Table load: 0.8 t Bjdpjv T U Udsfx Aa Towi Machine weight: approx. 7.2 t Equipped with Knoll scraper conveyor Internal coolant system Rapid traverse X/Y: 30,000 mm/min Rapid traverse Z: 20,000 mm/min Transport and loading can be arranged Europe-wide for an additional charge upon request. Prices plus VAT. Inspection possible by appointment. Contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase and sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), sk-004 Bedpfx Aeyln Dgea Tjwi

Tahun pembuatan: 2018, Kondisi: siap digunakan (bekas), Rotational axis: 360°, max. rotational speed: 60,000 rpm, including accessories and documentation. Bwedpfx Aajihp Ipj Tei

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), A CNC 4-axis milling and drilling machine by Maka for plastics, wood, and aluminum is available. Travel paths X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle taper: HSK63, spindle power: 12kW, spindle speed: 24,000 rpm. Tool stations: 12, angular head positions: 3. Machine dimensions X/Y/Z: 12,000mm/5,700mm/3,200mm, control system: BWO 920. Documentation available. An on-site inspection is possible. Bedpfx Aovmq Tvja Towi

Kondisi: bekas, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of construction: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Max. tool installation height: 414 mm Table width: 55 mm Table height above floor: 950 mm Bwedsxpqy Depfx Aa Toi Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Electrical connection: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis ram control - 2-axis back gauge: X-axis (depth adjustment of back gauge), R-axis (height adjustment of back gauge) - 2 back gauge fingers, laterally manually adjustable (Z1, Z2) - Ram driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Lower tool clamping: 55 mm wide with 13 mm groove, groove depth 21 mm (Trumpf system or UKB System B) - Supplied without press brake tools (new set from UKB costs approx. EUR 3,600 net) - Read operating hours: 8,120 h - Working strokes: 1,049,789 cycles Space requirement (L x W x H): 3,450 x 1,850 x 2,650 mm Weight: 5,000 kg Good condition

Kondisi: baru, Tahun pembuatan: 2026, kecepatan rotasi (maks.): 36.000 rpm, Sangat cocok untuk: Milling 3D yang sangat efisien untuk komponen kecil – milling presisi dengan output bagian tinggi Material: Plastik, komposit seperti CFK / GFK, material model, aluminium Industri: Otomotif, dirgantara, transportasi & logistik, industri rekreasi, sanitasi, pembuatan kapal, otomasi _____ Nomor referensi: 1221 Ketersediaan: April 2026 Bedox Uw Stjpfx Aa Tjwi Model: Mesin CNC 5-sumbu G-S-F/B (25-13) Data spindle: 8 kW / 6,4 Nm; 1.000–36.000 rpm; HSK E 40 Kecepatan gerak cepat X/Y/Z: 80/80/60 Ukuran benda kerja X/Y/Z: 2500 x 1300 x 600 Kontrol: SIEMENS – Sinumerik One dengan terminal manual HT 2 Penukar alat: 13 alat Meja: 1 meja putar Sistem vakum: ya Kontrol patah & panjang alat: Renishaw-TS 27 R Lain-lain: atas permintaan Tahun pembuatan: 2026 Kondisi: baru

Tahun pembuatan: 2023, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin CNC batu 4 sumbu untuk finishing pinggir / lubang keran dan wastafel - cocok untuk BT40ER40/80 - 15 dudukan alat disertakan - pompa vakum disertakan - termasuk penentuan titik nol otomatis melalui silinder pneumatik - tanpa instalasi air - ukuran panel kontrol 900x600x1800 mm Bsdpfev Dulqox Aa Tswi

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang benda kerja (maks.): 1.000 mm, lebar benda kerja (maks.): 800 mm, tinggi benda kerja (maks.): 400 mm, kecepatan spindel (maks.): 36.000 rpm, kecepatan spindel (min.): 1.000 rpm, Sangat cocok untuk: Penggilingan 3D dengan efisiensi tinggi untuk komponen kecil – penggilingan presisi dengan output bagian yang tinggi Material: Plastik, material komposit seperti CFK/GFK, material untuk model, aluminium Industri: Otomotif, dirgantara, transportasi & logistik, industri rekreasi, sanitasi, pembuatan kapal, otomasi _____ Nomor referensi: 1218 Ketersediaan: Maret 2026 Model: Mesin CNC Milling 5-Sumbu RT-F 1400 Bwodpoxdwndefx Aa Tei Data spindle: 8 kW / 6,4 Nm; 1000-36000 rpm; HSK E 40 Gerak rapid X/Y/Z: 40/40/30 Ukuran benda kerja X/Y/Z: 1000 x 800 x 400 Kontrol: SIEMENS – Sinumerik One dengan HT 2 Penukar alat: 12 alat Meja: 1 meja putar Kontrol patah & panjang alat: Renishaw-TS 27 R Lain-lain: wadah serpihan, pijakan plat berlubang Tahun produksi: 2026 Kondisi: baru

Kondisi: baru, Tahun pembuatan: 2026, kecepatan rotasi (maks.): 36.000 rpm, Sempurna untuk: Milling 3D dengan efisiensi tinggi untuk benda kerja kecil – milling presisi dengan output komponen tinggi Material: Plastik, material komposit seperti CFK / GFK, material pembuatan model, aluminium Industri: Otomotif, dirgantara, transportasi & logistik, industri rekreasi, sanitasi, pembuatan kapal, otomatisasi _____ Nomor referensi: 1221 Ketersediaan: April 2026 Model: Mesin Milling CNC 5-sumbu G-S-F/B (25-10) Data spindle: 8 kW / 6,4 Nm; 1000-36000 rpm; HSK E 40 Kecepatan gerak cepat X/Y/Z: 80/80/60 Ukuran benda kerja X/Y/Z: 2500 x 1000 x 600 Kontrol: FANUC Penukar alat: 13 alat Meja: 1 meja putar Sistem vakum: ya Kontrol patah & panjang alat: Renishaw-TS 27 R Lainnya: berdasarkan permintaan Bedex S E Nbepfx Aa Tewi Tahun pembuatan: 2026 Kondisi: baru

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 36.000 rpm, kecepatan spindel (min.): 12.000 rpm, cnc-maschinen-rtf-1400-2026 Bedpfxex S Etme Aa Tjwi

Kondisi: baru, Tahun pembuatan: 2025, panjang pemakanan sumbu X: 80 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 60 mm, 1 Bodpfjx S Eqlsx Aa Tjwi

Kondisi: sangat baik (bekas), 4-axis CNC-controlled MACHINING CENTER Gantry-type construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with pod and rail system, incl. 6 working rails (length: 1400 mm) Automatic positioning of the rails (X-axis) Automatic positioning of vacuum pods (Y-axis) Automatic tool change system Rotary tool changer - magazine capacity: 18 tool holders Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X - Y - Z): 295 x 115 x 14 mm Bjdpfx Aevxhnuea Tswi Maximum workpiece dimensions (X - Y - Z): 4250 x 2200 x 60 mm Chip conveyor included Supplied with separate electrical and control cabinet. Total connected load: 28 kW WORKING UNITS (UPPER): Vertical main spindle (milling unit) HSK F63 - Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for fixing and moving panels on the machine's vacuum pods 5 air tables for panel handling before processing Vacuum system with programmable suction units for lifting panels onto the conveyor belt Panel outfeed system with motorized conveyor belts

Tahun pembuatan: 2025, Kondisi: baru, de Bsdpeiv Imnofx Aa Towi

Kondisi: baru, Tahun pembuatan: 2025, 10463 Bodpfsxmd Szex Aa Tewi

Kondisi: baru, Tahun pembuatan: 2025, Ref.-No.: 10464 Manufacturer: IGREK Model: 3500 XXL Year of manufacture: 2025 Control type: CNC Control system: Siemens 840 D / Heidenhain iTNC 640 Location: Istanbul Country of origin: Türkiye X-axis travel: 10,500 mm Y-axis travel: 3,500 mm Z-axis travel: 1,400 mm A-axis: +/- 115° B-axis: 360° Maximum torque: 235 Nm Rapid traverse X/Y/Z: 30 m/min Spindle drive power: 54 kW Maximum table load: 4,000 kg Tool holder: HSK-A100 Spindle speeds: 12,500 rpm Machine length: 16,000 mm Machine width: 7,400 mm Machine height: 8,500 mm Weight: 195 t Additional Information: IGREK 3500 XXL – Custom Precision for Large-Scale Projects The IGREK 3500 XXL is a state-of-the-art CNC 5-axis gantry milling machine, specifically engineered for the highly precise machining of large workpieces. Built in 2024, immediately available, and equipped with the latest technology, it meets the most demanding standards in heavy industry and mechanical engineering. Key Features: - Gigantic Work Envelope: With travel distances of 10,500 mm (X), 3,500 mm (Y), and 1,400 mm (Z), this machine provides exceptional flexibility when machining oversized components. - 5-Axis Simultaneous Machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when processing complex parts. Bwodpfx Aoxc Tr Aea Tei - Powerful Spindle: Equipped with up to 12,500 rpm, a maximum torque of 235 Nm and a spindle drive power of 54 kW – ideal for high-performance machining operations. - Robust and Durable: With a weight of 195 tons and a table load capacity of up to 4,000 kg, this machine is built for heavy-duty applications. - Innovative Tool Holding: The HSK-A100 tool interface allows for rapid tool change and increased efficiency. - Speed and Efficiency: Rapid traverse speeds of 30 m/min on all axes ensure maximum productivity. Technical Data Overview: - Travel: X 10,500 mm / Y 3,500 mm / Z 1,400 mm - Spindle power: 54 kW - Spindle speed: 12,500 rpm - Table load capacity: up to 4,000 kg - Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm - Weight: 195 tons Additional Advantages: The machine is supplied with advanced Siemens 840D or Heidenhain iTNC 640 CNC control and offers global warranty and service support from the manufacturer. Rely on the IGREK 3500 XXL for precision and efficiency in large-part machining. Contact us now for a non-binding quote!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 630 mm, jarak lintasan sumbu Y: 710 mm, jarak gerak sumbu Z: 630 mm, berat keseluruhan: 26.000 kg, TECHNICAL DETAILS X-axis travel: 630 mm Y-axis travel: 710 mm Z-axis travel: 630 mm (Previous) Area of application: Cylinder head production Engine type: 4-cylinder diesel (EA189) Production output: approx. 2,000 parts/day MACHINE DETAILS Required space: approx. 5.7 × 3.4 × 3.2 m Machine weight: approx. 26 t EQUIPMENT Bwodpfov S H N Dsx Aa Toi - A-axis - Twin spindle

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, nomor mesin/kendaraan: 32-45326, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 710 mm, jumlah slot dalam magazin alat: 52, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The machine is particularly suitable for the mechanical machining of cylinder heads and cylinder crankcases. Maintenance and service intervals have been observed. TECHNICAL DETAILS X-travel: 800 mm Y-travel: 800 mm Z-travel: 710 mm Workpiece contour: Ø900 x 1000 mm Speeds Feed speed in X, Y, and Z axes: 36,000 mm/min Rapid traverse speed: 36,000 mm/min Spindle Tool holder: SK 50 Spindle diameter: 100 mm Speed: max. 12,000 rpm Pallets & Magazine Pallet size: 500 x 630 mm Tool magazine capacity: 52 positions Precision of ball screws: Ø50 x 20 mm MACHINE DETAILS Machine weight: approx. 12.5 t Total power requirement: 62 kW EQUIPMENT Bedpjv Tlraefx Aa Tjwi - B-axis - Infinitely variable spindle speed - Position measuring system

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 52.964 h, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 550 mm, model controller: Heidenhain MillPlus, kecepatan spindel (maks.): 12.000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Control unit: Heidenhain MillPlus Table Table length: 1,100 mm Table width: 650 mm Maximum table load: 800 kg Feed rate X-axis: 20,000 mm/min Y-axis: 20,000 mm/min Z-axis: 20,000 mm/min Spindle Spindle taper: ISO 40 / BT / MT Spindle power: 15 kW Maximum speed: 12,000 rpm Tool changer Bedpfx Aownbqgsa Tjwi Number of tools: 24 Number of controlled axes: 3 MACHINE DETAILS Length: 3,400 mm Width: 2,400 mm Height: 2,800 mm Weight: 8,700 kg EQUIPMENT - 4th axis - Chip conveyor - Coolant system - Electrical cabinet

Kondisi: baru, Tahun pembuatan: 2024, This is a CNC milling machine equipped with 4 spindles that can operate simultaneously and switch automatically! This significantly increases production efficiency, making it up to 4 times faster. This CNC router is ideal for large-scale production of façades, doors, windows, mouldings, and more. Thanks to the planetary gear of the Wattsan M1 1325, you can easily mill hardwoods and non-ferrous metals. Additionally, a vacuum table can be installed, ensuring rock-solid workpiece holding. With a Wattsan milling machine, you can process metal, hardwood, plastics, foam, aluminium, and plexiglas. Contact our sales team for further details! Key Features of the Wattsan M1 1325 S4: - Working area: 1300 x 2500 mm Bwodpfor D Ntfjx Aa Toi - Spindle: 6 kW - Machine dimensions: 2000 x 3040 x 1780 mm - Weight: 1000 kg Virmer not only provides top-quality machinery but also offers comprehensive service and delivery. Our engineers and managers are ready to answer all your questions and provide video support if needed. In addition, owners of Wattsan equipment receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. As the official supplier of Wattsan, we deliver not just laser engravers but also metal cutting machines, welders, markers, and cleaning devices. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and continuously develops its machines based on customer feedback. Thanks to this input, Wattsan has implemented over 50 improvements, making the machines more reliable, precise, and powerful—helping you take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for the right laser or CNC milling machine, we are happy to assist. We offer a wide range of laser equipment and accessories: CO2 laser machines; metal laser cutting machines; laser metal cutters; fiber laser cutters; fiber laser engraving machines; CNC milling machines for metal; woodworking routers; CNC routers; laser engravers; plywood laser cutters; metal laser cutters; CNC routers; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; air compressors; rotary axes; mirrors for laser machines.

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.400 mm, jarak lintasan sumbu Y: 2.700 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 24.000 rpm, model controller: Siemens CNC 840 D, TECHNICAL DETAILS Travel X-axis: 3,400 mm Travel Y-axis: 2,700 mm Travel Z-axis: 1,500 mm Control: Siemens CNC 840 D C-axis rotation range: +400° A-axis swivel range: +100° Clearance between columns: 2,200 mm Spindle Spindle speed: max. 24,000 rpm Spindle power: 15 kW Tool holder: HSK A63 Bjdev Uqyxepfx Aa Tewi Tool & Pallets Tool changer positions: 20 Number of pallets: 2 Pallet size: 2,500 × 1,400 mm EQUIPMENT - Gantry construction with 5 axes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, 4-axis CNC vertical lathe Brand: UMARO Model: SC27 Year: 2001 / 2018 (retrofit) CNC: FANUC 0i Specifications: Turning capacity: Max. swing diameter: 2650 mm Max. turning diameter: 2600 mm Max. turning height: 1900 mm Table: Diameter: 2500 mm Max. load: 15 t Turning speed (2 ranges): 1 to 112 rpm Main motor power: 75 / 60 kW Rams on crossrail: Vertical travel of right ram: 760 mm Bwjdpfew Add Eox Aa Tji Vertical travel of left ram: 1200 mm Crossrail: Vertical travel: 1600 mm Dimensions (W x D x H, fully extended): 5 x 4.8 x 4.8 m Equipped with: Grinding spindle on left ram Set of 4 jaws

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, jam operasional: 42.832 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.100 mm, jarak gerak sumbu Z: 760 mm, model controller: FANUC SERIES 18i MB, jarak antara tiang: 2.300 mm, 1 Bwodpsymxi Ajfx Aa Toi