Beli Alat Dan Cutter Grinder bekas (24.343)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
iklan kecil

11.191 km
Pemotong alat
DeckelFP1 Aktiv
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed – As-new condition
Technical Specifications:
>> Year of manufacture: 1987 Machine No. 2102-3536
Hfsdpfx Aju R D I Sodqjn
>> Fixed angle table
>> Spindle speed: 40 – 2000 rpm
>> Infinitely variable feed on 3 axes
>> Rapid traverse on 3 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travel (X/Y/Z): 300/160/340 mm
>> Vertical milling head can be displaced on spindle carrier by 100 mm
>> Vertical and horizontal quills - SK40
>> Drawbar system S20x2
>> Weight approx. 800 kg
Accessories and Equipment:
>> 3-axis digital display Heidenhain TNC113
>> Centralized electric lubrication
>> Machine lamp
>> Coolant system
>> Operating manual, spare parts catalog
About the machine:
Offered here is a Deckel FP1 universal milling machine, year 1987, in original as-new condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, and the machine also features rapid traverse in these axes. The active 3-axis digital readout is a major advantage. With this Heidenhain TNC113 system, you can enter target positions, and the machine will automatically move to them. The FP1 was used in a training facility and was only operated occasionally. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.
iklan kecil

11.790 km
Alat penggiling
Walter HelitronicHMC 400
Hubungi
Kondisi: bekas, Walter Helitronic Power HMC 400, CNC Tool & Cutter Grinder 5 sumbu, S/N 6504, tahun 1997. Disertakan dengan manual asli mesin dan pemrograman.
Catatan: Kami memiliki tiga mesin – satu berfungsi normal dan dua lainnya untuk suku cadang dan perbaikan. Semua bagian ada pada mesin, serta kami memiliki cadangan perkakas grinding sesuai gambar.
Hfedpfxsw Ipano Adqon
iklan kecil

10.554 km
Penggiling alat
ANCARGX
Hubungi
Kondisi: bekas, Tahun pembuatan: 2001, nomor mesin/kendaraan: 410116, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Machine equipped with a robot (40 tools). Play likely needs to be eliminated on the Y-axis. Fully operational.
Hjdpfewrt Ixex Adqjfn

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
iklan kecil

11.101 km
Pemotong alat
DeckelFP3 L Aktiv
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 1978, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. In operational condition. Can be demonstrated under power by prior arrangement.
Hsdpfx Adoug T Dxsqsfn
iklan kecil

11.208 km
Pemotong alat
DECKELFP4NC-2810
Hubungi
Kondisi: perlu perbaikan (bekas), panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan pemakanan sumbu X: 2.000 m/menit, laju pemakanan gandar Y: 2.000 m/menit, laju pemakanan sumbu Z: 2.000 m/menit, gores kuas bulu: 80 mm, diameter quill: 90 mm, kecepatan spindel (maks.): 3.150 rpm, kecepatan spindel (min.): 25 rpm, gerak cepat sumbu X: 3.000 m/menit, pergeseran cepat sumbu Y: 3.000 m/menit, pergerakan cepat sumbu Z: 3.000 m/menit, panjang meja: 700 mm, lebar meja: 430 mm, tinggi total: 2.100 mm, panjang total: 2.300 mm, lebar total: 2.000 mm, berat keseluruhan: 2.500 kg, beban meja: 300 kg, tegangan masuk: 400 V, lebar yang dibutuhkan: 3.000 mm, persyaratan ruang panjang: 3.500 mm, kebutuhan tinggi: 2.100 mm, panjang kabinet kontrol: 800 mm, lebar kabinet kontrol: 700 mm, Perlengkapan: dokumentasi / manual, DECKEL - FP4 NC milling machine
With manual 3D table (rotatable)
Hjdpfxjwh Ituj Adqsfn
Note:
Error message appears when moving the Z-axis
The machine is already placed on a pallet and is ready for collection or shipping.
Various tool holders can be purchased additionally upon request.
We look forward to receiving your price offer.
iklan kecil

11.062 km
Pemotong alat
MacmonM 100 E
Hubungi
Kondisi: sangat baik (bekas),
iklan kecil

11.191 km
ALAT PENGGILING
Michael DeckelS11
Hubungi
Kondisi: sangat baik (bekas), Universal tool and cutter grinder Michael Deckel S11 with accessories and tool cabinet in very good condition!!
Technical data:
>> Year of manufacture: 1986
>> Serial no.: 759
Clamping range:
>> Clamping surface of the tool carriage: 500 x 180mm
>> Max. tool diameter between centres: 130mm
>> Max. tool diameter for overhung setup on universal dividing head: 620mm
>> Max. tool length between centres: 270mm
>> T-slot base: 12mm
>> T-slots on grinding head, tool carriage, and accessories: 8mm
Movement ranges:
>> Working travels:
Grinding stroke: 190mm
Hedsqd N S Djpfx Adqsfn
Grinding stroke for spiral grinding: 190mm
Cross travel of tool carriage: 100mm
Vertical adjustment grinding head: 325mm
Longitudinal adjustment grinding spindle: 5mm
>> Coarse adjustment:
Tool holder: 220mm
Grinding head support: 800mm
Universal dividing head on tool carriage: 330mm
>> Swivel ranges:
Grinding head support: 360 degrees
Grinding head: 360 degrees
Tool holder: 360 degrees
Grinding spindle:
Three-phase drive motor: 1.1kW at 2800 rpm
Spindle speeds, stepless: 2000 to 12000 rpm
Max. grinding wheel diameter: 125mm
Max. cutoff wheel diameter: 200mm
Dimensions:
Weight: 520 kg
Dimensions (D x W x H): 800 x 1100 x 1760mm
Required space (including operation): 2.5 x 2.3 m
Accessories and equipment:
1 pc tool cabinet containing:
>> Universal dividing head SK40
>> Spiral and relief grinding attachment
>> Radius grinding attachment SK40
>> Tailstock
>> Pivoting support finger
>> Machine vice
>> SK40 tool holders
>> Measuring holder
>> Intermediate support
>> Setting gauge
>> Support finger for radius cutters
>> Tooth supports
>> Dividing head centre
>> Safety covers
>> 1 set of collets, as new, from 1 to 17.5mm in 0.5mm increments
>> Grinding wheel arbors
>> Various grinding wheels
>> Indexing discs
>> Extraction unit with vacuum
>> Various holders and much more (as seen in the pictures)
About the machine:
Offered is a universal tool and cutter grinder Michael Deckel S11. This machine is suitable for grinding high-precision parts. With the S11, single parts and small batches can be ground surprisingly fast, efficiently, and flexibly, all with maximum operating convenience. The Deckel S11 is in very good condition and comes with a large range of accessories. It has been mechanically and electrically checked. Take advantage of the opportunity to inspect and test the machine under power on site.
iklan kecil

11.494 km
Grinda alat 5-sumbu - WALTER Helitronic
WalterHelitronic Basic
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 750 rpm, panjang pemakanan sumbu X: 470 mm, panjang umpan sumbu Y: 330 mm, panjang umpan sumbu Z: 640 mm, jenis arus masuk: tiga fasa, diameter roda gerinda: 150 mm, berat keseluruhan: 4.500 kg, kecepatan spindle penggilingan: 10.500 rpm, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 15 m/menit, daya motor spindle penggiling: 7.000 W, diameter benda kerja (maks.): 320 mm, frekuensi input: 50 Hz, tegangan masuk: 400 V, tahun perombakan terakhir: 2025, WALTER Helitronic Basic – CNC-Werkzeugschleifmaschine
TECHNISCHE DATEN:
Baujahr: 2008
CNC-Steuerung: FANUC 310i – MODELL A5
Installierte Software: Tool Studio Version 1.70.0.136
Achszahl: 5
Verfahrweg X-Achse: 470 mm
Verfahrweg Y-Achse: 330 mm
Verfahrweg Z-Achse: 640 mm
Verfahrgeschwindigkeit X, Y und Z Achsen: 15.000 mm/min
A-Achse: 360°
C-Achse: +/- 200°
Max. Werkstücklänge (Komplettbearbeitung): 255 mm
Max. Werkstücklänge (Rundschleifen): 350 mm
Max. Werkstücklänge (Planschleifen): 280 mm
Max. Schleifdurchmesser: 320 mm
Max. Schleifdurchmesser mit automatischem Werkstücktisch: 290 mm
Schleifspindelaufnahme: NCT
Schleifspindeldurchmesser: 70 mm
Schleifscheibendrehzahl: 10.500 U/min
Leistung Schleifspindelmotor: 7 kW
Max. Schleifscheibendurchmesser: 150 mm
Werkstückspindelaufnahme: ISO 50
Max. Werkstückgewicht im Spindelkopf: 20 kg
Betriebsstunden: 10.752 h
Kühlmittelpumpendruck: 7 bar
Kühlmittelpumpe Fördermenge: 80 l/min
Schmieröltankvolumen: 350 l
Versorgungsspannung: 400 V
Gewicht: 4.500 kg
AUSSTATTUNG:
x1 Software TOOL STUDIO 1.7
x1 ECO LOADER automatischer Werkzeuglader
x1 Werkzeugpalette (20 Plätze)
x1 automatisches Werkzeugspannsystem
x1 RENISHAW Werkzeugtaster
x1 Kalibrierkugeloption: Automatische Kalibrierung der X-, Y- und Z-Achsen
x1 DSL AIR TECHNOLOGY AES-SIGMA 20 Ölnebelabscheider
x1 Schmieröltank
x1 Papierbandfilteranlage
x1 GRUNDFOS Kühlmittelpumpe
x1 Brandbekämpfungssystem (Abnahme durch Käufer mittels Fachfirma erforderlich)
x2 Schleifscheibenflansche + Distanzstücke
x1 Maschinenparameter-Backup
x3 Technische Handbücher (Papierform)
x1 Technische Dokumentation (CD-ROM)
ZUSÄTZLICHE INFORMATIONEN:
Die Maschine kann nach Terminvereinbarung unter Strom besichtigt werden.
Preis auf Anfrage, Verladung auf LKW inklusive.
Weltweiter Versand möglich.
Hfsdpfx Aswu Tygsdqen
Die Angaben auf dieser Seite wurden nach bestem Wissen gemacht. Eine Gewähr für die Richtigkeit wird nicht übernommen.
iklan kecil

11.221 km
Pemotong alat
DECKELFP 4 NC
Hubungi
Kondisi: bekas, Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2810-4023, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, kecepatan spindel (maks.): 4.000 rpm, kecepatan spindel (min.): 40 rpm, panjang meja: 430 mm, lebar meja: 710 mm, tinggi total: 2.400 mm, panjang total: 2.300 mm, lebar total: 2.300 mm, berat keseluruhan: 2.000 kg, For sale: Well-maintained and fully functional Deckel FP4NC tool milling machine with Contour 3 control unit.
Includes rotary table (4th and 5th axis) Deckel FP 2212 (No. 800-0237), significantly expanding the machine’s application range. The machine has only been used for machining plastics. It is immediately available and ideally suited for precise single-part and series production or educational institutions. Last in operation in November 2024.
The machine can be inspected by appointment at any time.
Local pick-up: Grossacherstrasse 41, 8634 Hombrechtikon, from ramp.
Technical Data:
Machine: Deckel FP4NC
Machine/Serial No.: 2810 - 4023
Condition: used, very good condition
Accessories: Deckel FP 2212 rotary table + extensive additional equipment
Travels:
x-axis: 500 mm
y-axis: 400 mm
z-axis: 450 (390) mm
Work Table:
Table area: 710 x 430 mm
Spindle:
Speed range: 40 – 4,000 rpm (infinitely variable)
Spindle drive: 4.0 kW
Toolholder: SK40
Feeds:
Working feed: 10 – 2,000 mm/min
Rapid traverse: 4.0 m/min
Power and Weight:
Total drive power: 9 kW
Machine weight: approx. 2 t
Installation dimensions: approx. 2.4 x 2.3 x 2.3 m (LxWxH)
Hfodpfewrya Iex Adqon
Equipment:
CNC control: Contour 3
Rotary table available for 4th and 5th axis
Vertical head swivels +/- 130°
Fixed angle table
Automatic central lubrication
Pendant control panel with detachable handwheel
Separate switch cabinet with main safety disconnect
Safety emergency stop at control panel
Compact design
Special features:
Deckel FP 2212 rotary table included in the scope of delivery
Extensive accessories for versatile machining
iklan kecil

10.275 km
Alat penggiling
KLINGELBSA 40
Hubungi
Kondisi: siap digunakan (bekas), Tahun pembuatan: 1976, Fungsionalitas: berfungsi sepenuhnya, Semi-automatic drill bit sharpening machine for sale due to model change! Sharpening range: 3–40 mm
Hfedpfx Aovirg Njdqjn
iklan kecil

11.191 km
Pemotong alat
DeckelFP2 Aktiv
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 with 3-axis Aktiv TNC 113 Heidenhain digital readout and infinitely variable feed in TOP condition
Technical Data:
>> Year of manufacture: 1979 Machine no.: 2202-10777
>> Rigid angle table (freshly planed)
Hjdpfsuc Ubwjx Adqsfn
>> Spindle speed: 25 - 2500 rpm
>> Infinitely variable feed in 3 axes
>> Rapid traverse on 3 axes
>> Motor power: 2.2 kW
>> Spindle brake
>> Travel X/Y/Z: 400/220/400 mm
>> Vertical milling head adjustable 150 mm on spindle carrier
>> Vertically extendable quill and horizontal quill - SK40
>> Drawbar system S20x2
>> Weight approx. 1400 kg
Accessories and features:
>> 3-axis TNC 113 Aktiv digital readout Heidenhain
>> Coolant system
>> Central lubrication
About the machine:
For sale is a universal milling machine Deckel FP2 in very good condition. The FP2 comes from a laboratory of a state-owned facility, where it saw only limited use. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. On this later FP2 model, the feed is infinitely adjustable on all three axes, and the machine further features rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With this Heidenhain positioning control, you can enter dimensions and the machine will automatically move to the set position. An oil change has been performed. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take this opportunity to view and test this machine under power on site.
iklan kecil

11.191 km
Pemotong alat
DeckelFP3
Hubungi
Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!!
Technical Data:
- Year of manufacture: approx. 1975
Hedpfx Adewkhr Ajqefn
- Machine number: 0681
- Swivel-tilt table (recently overhauled)
- Speed range: 40 – 2000 rpm
- Feeds and rapid traverse on 3 axes
- Drive power: 3 kW
- Travels X/Y/Z: 500/300/400 mm
- Equipment: Vertical and horizontal spindle
- Extendable vertical and horizontal quill – SK-40 taper
- Clamping system: M16
- Weight: approx. 1,300 kg
Accessories and Equipment:
- 3-axis digital readout RSF Elektronik Z-530
- Coolant device
- Central lubrication
About the machine:
Offered is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most bellows are nearly new. The swivel-tilt table is as-new. Oil change has been performed. Mechanically and electrically tested. The digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.
iklan kecil

11.191 km
Pemotong alat
Deckel repowered by FPSFP1
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 repowered by FPS, year of manufacture 2010, with 3-axis digital readout Heidenhain ND 780 – As New Condition!!
Technical Data:
>> Machine No. 55249/08, year of manufacture 2010
>> Fixed angle table
>> Spindle speeds: 40 – 2000 rpm
>> Feed on 2 axes
Hfodpfx Adswpi A Toqjn
>> Drive power: 1 / 1.5 kW
>> Travel distances X/Y/Z: 300/150/340 mm
>> Vertical quill SK40 and horizontal quill SK40
>> Drawbar system S20x2
>> Weight approx. 700 kg
Accessories and Features:
>> 3-axis digital readout Heidenhain ND 780
>> Hydraulic vice
>> Collets
>> Tool holders
>> Milling cutters
>> Operating manual
>> Coolant system
About the Machine:
Offered here is a Universal Milling Machine Deckel FP1 repowered by FPS, in as-new condition. Included accessories are a hydraulic vice with swivel base, collet chuck, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout provides easier and more precise operation. You are welcome to inspect and test the machine under power on site. The machine is available immediately.
iklan kecil

11.191 km
Pemotong alat
DeckelFP2
Hubungi
Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP2 in special paint finish with 3-axis Sony digital readout from university use!!
Technical specifications:
>> Machine No.: 4547
>> Swiveling tilting rotary table
>> Spindle speed: 40 – 2000 rpm
>> Feed and rapid traverse on all three axes
>> Drive power: 2.2 kW
>> Travel distances (X/Y/Z): 500/200/400 mm
>> Equipment: vertical & horizontal spindle
>> Extendable vertical and horizontal quill – SK-40
>> Drawbar system S20x2
>> Weight approx. 1100 kg
Accessories and features:
>> 3-axis Sony digital readout
>> Coolant system
Hfodpjwkhvnsfx Adqon
About the machine:
For sale is a universal milling machine Deckel FP2 in very good condition. It comes from a government facility and has seen very little use. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically tested. The Sony digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power.
iklan kecil

11.191 km
Pemotong alat
DeckelFP1 Aktiv 2008 Retrofit FA Huttelmaier
Hubungi
Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, F736
Universal Milling Machine Deckel FP1
with 3-axis active digital readout TNC 111 Heidenhain
2008 retrofit at FA Huttelmaier
Very good CONDITION
Technical Data:
Hedpfx Aou Nvwvodqsfn
>> Year of manufacture: 1985, Machine No. 2102-2891
>> Fixed angle table
>> Spindle speed: 40 - 2000 rpm
>> Infinitely variable feed in 3 axes
>> Rapid traverse in 3 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travels X/Y/Z: 300/160/340 mm
>> Vertical milling head can be shifted 100 mm on spindle arm
>> Vertical and horizontal quill – SK40
>> Drawbar system S20x2
>> Weight approx. 800 kg
Accessories and Features:
>> 3-axis digital readout Heidenhain TNC 111
>> Coolant system
>> Operating manual, spare parts list
About the Machine:
Offered is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was completely overhauled in 2008 by the company Huttelmaier. The machine shows minimal play in the handwheels, and all spindles move smoothly. Even at maximum rotation speed, the milling machine runs very smoothly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position controller, you can enter desired dimensions, and the machine will automatically position to them. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and more precise. Take this opportunity to inspect and test this gem on site under power.
iklan kecil

11.191 km
Pemotong alat
DeckelFP1 Aktiv
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed
Excellent Condition
Hfsdpeu T D Nrsfx Adqen
Technical Data:
>> Year of Manufacture: 1992 Machine No.: 2102-6289
>> Fixed angle table (freshly planed)
>> Speed range: 40 - 2000 rpm
>> Infinitely variable feed on all 3 axes
>> Rapid traverse on all 3 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travel distances X/Y/Z: 300 / 160 / 340 mm
>> Vertical milling head on spindle carrier adjustable by 100mm
>> Vertical and horizontal quill - ISO 40 taper (SK40)
>> Drawbar system: S20x2
>> Weight approx. 800 kg
Accessories and Equipment:
>> 3-axis Heidenhain TNC 113 digital readout
>> Coolant device
>> Operating manual, spare parts list
About the machine:
For sale is a universal milling machine Deckel FP1, year 1992, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, feed can be infinitely adjusted on all three axes; rapid traverse is also available on these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will automatically approach. The FP1 was previously in a training workshop, where it was only used occasionally. Oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power on site.
iklan kecil

11.191 km
Pemotong alat
DeckelFP1 Aktiv
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed – Excellent CONDITION
Technical data:
>> Year of manufacture: 1984 Machine No. 2102-2601
>> Swivel-tilting rotary table
>> Spindle speed: 40 - 2000 rpm
>> Stepless feed on 3 axes
>> Rapid traverse in 3 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travel X/Y/Z: 300/160/340 mm
>> Vertical milling head can be displaced on spindle carrier by 100 mm
>> Vertical and horizontal quill – SK40
>> Drawbar system S20x2
>> Weight approx. 800 kg
Accessories and equipment:
Dpbyzb
>> 3-axis digital readout Heidenhain TNC113
Hfodpfxou Racrj Adqen
>> Coolant system
>> Operating manual, spare parts list
About the machine:
Offered here is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed in all three axes is steplessly adjustable, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can input measurements, and the machine will automatically move to the set positions. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.
iklan kecil

11.191 km
Pemotong alat
KunzmannWF 600M
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Kunzmann WF 600M Universal Milling Machine with Heidenhain TNC 124 Control – AS NEW CONDITION, CE Compliant!
Technical Data:
>> Year of manufacture: 2013 Machine No.: 610261
>> Milling table clamping surface: 800 x 425 mm
Hfedjurv T Ijpfx Adqen
Number of T-slots: 6
T-slot width: 14 H 7
T-slot spacing: 63 mm
Max. table load: 300 kg
>> Spindle speeds S I: 1 – 1125 rpm
Spindle speeds S II: 1126 – 4500 rpm
>> Feed rate (potentiometer 100%): 0 – 2000 mm/min
Rapid traverse X and Y: 5000 mm/min
Rapid traverse Z: 4000 mm/min
>> Travel X/Y/Z: 600/400/400 mm
>> Vertical and horizontal quill – SK40
>> Hydraulic clamping system
>> Weight approx. 2000 kg
>> Dimensions approx.: 2 x 2 x 2 m
>> Main drive motor: 5.5 kW
Equipment and Accessories:
>> Heidenhain TNC 124 CNC control
>> Heidenhain HR410 electronic handwheel
>> Hydraulic clamping for vertical and horizontal operation
>> Chip rinse gun
>> Automatic central lubrication system
>> Spindle brake
>> Technical documentation, spare parts diagrams, operating manual
>> Coolant system
About the Machine:
For sale is a Kunzmann WF 600M universal milling machine equipped with a Heidenhain TNC 124 control unit. This machine is in as-new condition. It was previously used only occasionally for training purposes in a large industrial facility. The control system is very user-friendly. The machine features hydraulic clamping for both vertical and horizontal operation. Conversion from vertical to horizontal milling is very straightforward, simply by swiveling away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. You are welcome to view and test the machine under power at our facility. Two identical machines are available.
iklan kecil

11.191 km
Pemotong alat
DeckelFP1 2006 Generalüberholt
Hubungi
Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF, Overhauled in 2006, TOP Condition
Technical Data:
>> Machine No. 53819/08
>> Fixed angle table
>> Spindle speed: 40 – 2000 rpm
>> Feed on 2 axes
>> Drive power: 1 / 1.5 kW
>> Travels X/Y/Z: 300/150/340 mm
>> Vertical quill and horizontal quill – SK40 taper
>> Spindle brake
>> Drawbar system S20x2
Hodpfxovb Ud Uj Adqsfn
>> Weight approx. 700 kg
Accessories and Equipment:
>> 3-axis digital readout by RSF Elektronik
>> Coolant system
>> Machine leveling feet
About the Machine:
Offered here is a Deckel FP1 universal milling machine in very good condition. The Deckel features minimal backlash and all spindles move easily. An oil change has been carried out. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen little use since. The RSF digital readout makes operation easier and more precise. Take advantage of the opportunity to view and test this machine under power on site.
iklan kecil

11.191 km
Pemotong alat
Deckel repowered by FPSFP1
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1, repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout – As new condition!!
Technical Data:
>> Machine no.: 2101-51084, year 2011
>> Rigid angle table
>> Spindle speed: 40 - 2000 rpm
>> Feed on 2 axes
>> Drive power: 1 / 1.5 kW
>> Travel X/Y/Z: 300/150/340 mm
>> Vertical and horizontal spindle taper: SK40
>> Drawbar system: S20x2
Hodpfxjwpi Dqj Adqjfn
>> Weight approx. 700 kg
Accessories and Equipment:
>> 3-axis digital readout Heidenhain ND 780
>> Hydraulic vise
>> Collets
>> Tool holders
>> Milling cutters
>> Operating manual
>> Coolant system
About the machine:
For sale is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. The scope of delivery includes a hydraulic vise with rotary base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel FP1 live under power at our facility. The machine is available immediately.
iklan kecil

11.191 km
Pemotong alat
DeckelFP4M Aktiv CE Konform
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001
Hedsu Tuk Hepfx Adqofn
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

iklan kecil

11.191 km
Pemotong alat
DeckelFP1 3 Achs Vorschub
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with New 3-Axis K&C Digital Readout and Stepless Feed on All Axes – Excellent Condition
Technical Data:
>> Year of manufacture: 1985 Machine no.: 2102-2867
>> Swivel-tilt rotary table (recently planed)
>> Spindle speed range: 40 – 2000 rpm
>> Infinitely variable feed on all 3 axes
>> Rapid traverse on all 3 axes
Hsdpfx Aet Aarpodqofn
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Travels (X/Y/Z): 300/160/340 mm
>> Vertical milling head can be shifted 100 mm on the column
>> Vertical and horizontal quill – SK40 taper
>> Drawbar system: M16
>> Weight approx. 800 kg
Accessories and Equipment:
>> 3-axis digital readout K+C – newly installed, with manufacturer warranty and user manual.
Display unit: reference points, set zero points, input of coordinates, mm/inch switching, absolute/incremental coordinates, circle functions, hole patterns, radius milling functions, and more.
>> Coolant system
>> Operating manual, spare parts diagram
About the machine:
Offered is a universal milling machine Deckel FP1 from 1985 in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speed, the milling machine runs very quietly. This newer FP1 model features stepless feed regulation on all three axes, as well as rapid traverse on these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital readout from K&C makes operation easier and even more precise. Arrange a viewing and live test operation on site under power.
iklan kecil

11.191 km
Pemotong alat
Deckel repowered by FPSFP2
Hubungi
Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!!
Technical Specifications:
- Machine No.: 2202-7020, FPS No.: 3364, Year: 2013
Hedpevbifgefx Adqsfn
- Fixed angle table
- Spindle speed: 40 - 2,000 rpm
- Feed and rapid traverse on 3 axes
- Drive power: 2.2 kW
- Travel X/Y/Z: 400 / 200 / 400 mm
- Features: Vertical and horizontal spindle
- Extendable vertical and horizontal quill - SK 40
- Drawbar system S20x2
- Weight approx. 1,100 kg
Accessories and Equipment:
- 3-axis digital readout Heidenhain ND 780
- Brake motor for immediate spindle stop
- Centralised lubrication
- 2 x emergency stop buttons
- Operating manual
- Coolant system
About the machine:
Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.
iklan kecil

11.191 km
Pemotong alat
DeckelFP1 stufenlos
Hubungi
Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis K&C digital readout, stepless feed, in light grey, excellent condition
Technical Data:
>> Year of manufacture: 1978 Machine No. 2101-0465
>> Fixed angle table
>> Spindle speed: 40 - 2000 rpm
>> Stepless feed on 2 axes
>> Drive power: 1.5 / 1.9 kW
>> Spindle brake
>> Rapid traverse
>> Travel X/Y/Z: 300/160/340 mm
>> Vertical milling head adjustable on spindle carrier by 100 mm
>> Vertical quill and horizontal quill – SK40
>> Drawbar system S20x2
>> Weight approx. 700 kg
Accessories and Features:
Hsdpfet Aav Isx Adqefn
>> 3-axis K&C digital display newly installed, with manufacturer's warranty and operating manual.
Display unit: setting of reference points and zero points, coordinate input, mm/inch selection, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc.
>> Coolant system
About the Machine:
Offered here is a Universal Milling Machine Deckel FP1 in excellent condition. The machine has minimal play in the cranks and all spindles move smoothly. All bellows are new. This later FP1 model features stepless feed on two axes, and also has rapid traverse. An oil change has been carried out. The machine has been mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. You are welcome to view and test the machine under power at our premises.
iklan kecil

11.191 km
Pemotong alat
DeckelFP1
Hubungi
Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1
with 3-axis Heidenhain digital readout
Original condition!!!
Technical data:
>> Machine No. 56560/08 Year of manufacture: approx. 1975
>> Fixed angular table
>> Spindle speeds: 40 - 2000 rpm
>> Feed on 2 axes
>> Motor power: 1 / 1.5 kW
>> Travel X/Y/Z: 300/150/340 mm
Hsdpfeu Nvxmsx Adqsfn
>> Vertical quill SK40 and horizontal quill SK40
>> Drawbar system S20x2
>> Weight approx. 700 kg
Accessories & equipment:
>> 3-axis Heidenhain digital readout
>> Coolant system
About the machine:
For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and more precise. You are welcome to view and test the Deckel under power on site.
Kami memudahkan pencarian untuk Anda: "alat cutter grinder"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.
Bekas Alat Dan Cutter Grinder (24.343)
Sekarang telusuri seluruh Machineseeker dengan lebih dari 200.000 mesin bekas.Jelajahi nama mesin paling populer:

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan