Beli Alat Pemotong bekas (30.626)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Dsdpfx Asu Tuk Hep Ejck

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!! Technical Specifications: - Machine No.: 2202-7020, FPS No.: 3364, Year: 2013 - Fixed angle table - Spindle speed: 40 - 2,000 rpm - Feed and rapid traverse on 3 axes - Drive power: 2.2 kW - Travel X/Y/Z: 400 / 200 / 400 mm - Features: Vertical and horizontal spindle - Extendable vertical and horizontal quill - SK 40 - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Brake motor for immediate spindle stop - Centralised lubrication - 2 x emergency stop buttons - Operating manual - Coolant system Dodpfx Apevbifgs Eock About the machine: Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical specifications: >> Year of manufacture: approx. 1975, Machine no. 0681 >> Swivel-tilt table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 3 kW >> Travel (X/Y/Z): 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system M16 >> Weight approx. 1300 kg Accessories and features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: Dcjdpfxsxu E I Hs Ap Eek Offered is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swivel-tilt table is as good as new. An oil change has been performed. Mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available!!!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP4MK with 3-axis Heidenhain active digital display, light grey, in excellent condition, CE compliant!!! Technical Data: >> Year of manufacture: 1992 Machine No. 2203-8489 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle support >> Vertical and horizontal quill - SK40 >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1600 kg Equipment and Accessories: >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Central electric lubrication >> Operating manual, spare parts diagrams Djdpfow Evq Aex Ap Eock About the machine: Offered here is a Deckel FP4M Aktiv universal milling machine in excellent condition, CE compliant. The machine has very little backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs quietly. The machine is equipped with hydraulic clamping. On this newer FP4 model, the feed is infinitely variable in all three axes, and each axis features a rapid traverse. A major benefit is the active 3-axis digital display. With this Heidenhain position control, you can enter dimensions which the machine automatically approaches. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis K&C digital readout, stepless feed, in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis K&C digital display newly installed, with manufacturer's warranty and operating manual. Display unit: setting of reference points and zero points, coordinate input, mm/inch selection, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. Dodpfxjt Aav Ij Ap Eeck >> Coolant system About the Machine: Offered here is a Universal Milling Machine Deckel FP1 in excellent condition. The machine has minimal play in the cranks and all spindles move smoothly. All bellows are new. This later FP1 model features stepless feed on two axes, and also has rapid traverse. An oil change has been carried out. The machine has been mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. You are welcome to view and test the machine under power at our premises.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis Heidenhain digital readout Original condition!!! Technical data: >> Machine No. 56560/08 Year of manufacture: approx. 1975 >> Fixed angular table >> Spindle speeds: 40 - 2000 rpm >> Feed on 2 axes >> Motor power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 Dcjdpfeu Nvxmox Ap Esk >> Weight approx. 700 kg Accessories & equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and more precise. You are welcome to view and test the Deckel under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 3.0 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head on spindle support, adjustable by 150 mm >> Vertical and horizontal quill – SK40 retractable >> Drawbar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis Heidenhain digital display >> Coolant system >> Mechanical central lubrication Djdoxghtvepfx Ap Eock About the Machine: For sale is a Deckel FP2 universal milling machine in very good condition. The FP2 exhibits very little handwheel backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs smoothly. On this newer FP2 model, the feed is steplessly adjustable in all three axes; in addition, the machine features a rapid traverse for every axis. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to view and test this machine under power on site.

Kondisi: baru, Tahun pembuatan: 2025, panjang pemakanan sumbu X: 300 mm, panjang umpan sumbu Y: 165 mm, panjang umpan sumbu Z: 280 mm, jarak pergerakan sumbu X: 310 mm, jarak lintasan sumbu Y: 170 mm, jarak gerak sumbu Z: 330 mm, gores kuas bulu: 70 mm, kecepatan spindel (maks.): 2.600 rpm, kecepatan spindel (min.): 40 rpm, berat keseluruhan: 730 kg, Dear Sir or Madam, We are pleased to offer you the Macmon M100 NC. This model is a true all-rounder, ideal for training applications and small-batch production. The Macmon features a conventional base in combination with a Heidenhain TNC128 CNC path control, making this machine an essential must-have in specific working environments. Best of all: With a footprint of just one square meter, this machine fits into any workshop! Technical Standard Specifications: • Heidenhain TNC 128 control (integrated in the control panel) • Ribbed cast iron construction with hardened and ground guideways on column and carriage • Swiveling vertical head 360º • Extendable quill, travel 70 mm • Removable vertical head for switching between vertical and horizontal milling operations • Dovetail guides on all axes • Ground ballscrews on all axes Dcedpfxox H Nw Sj Ap Esk • Mechanical tool clamping for vertical and horizontal spindle • Tool holder ISO 40 for tools according to DIN 2080 AT 3, with draw thread S 20 x 2 or M 16 • Fixed angle table 215 x 600 mm, T-slots 4 x 12 H7 (spacing 45 mm) • Vertical mounting surface 195 x 640 mm, T-slots 2 x 12 H7 (spacing 90 mm) • HEIDENHAIN linear encoders, direct, resolution 0.001 mm • Positioning accuracy 0.02 mm, repeatability 0.005 mm • Horizontal milling attachment, console and end support • Chip tray, blue RAL 5019 • Paint finish blue RAL 5019, grey RAL 7035 • 1 operating manual • 1 CD programming instructions for TNC 128 • 1 inspection record and basic wiring diagram • 1 hand-operated oil pump • With support bearing, bushing ø 16 mm (plain bearing) for milling arbor length 230 mm • Machine lamp • Chip guard (required safety device according to EN 13128 for EU countries)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Mesin pengasah alat 5 sumbu dalam kondisi sangat baik, dijual karena tidak terpakai! Dcedexw Sxkjpfx Ap Eek

Kondisi: baik (bekas), Tool sharpening machine with wet grinding. Djdpfxeich Elo Ap Ejck

Kondisi: baik (bekas), Tahun pembuatan: 1990, Macmon M 100 E tool milling machine with 2-axis Elesta-Heidenhain digital display, from training department, rigid table, SK 40 spindle taper. Good, operational condition, can be demonstrated under power by arrangement. Dsdpfxsrazzre Ap Eeck

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Mesin frais alat Macmon M 100 NC Kecepatan poros dapat diatur tanpa tingkat, Pemegang alat SK 40 Dodox Hga Depfx Ap Eock Perangkat pendingin Manual pengoperasian

Kondisi: baik (bekas), Acera F3 Mesin frais dengan kualitas terbaik. Mesin dan transmisi terdengar sempurna. Tidak ada aksesori lain selain yang terlihat di gambar. Dapat dimuat di Eurotrailer dan pengiriman ke seluruh Eropa dapat diatur. Dedpsr Ixpdsfx Ap Esck

Kondisi: bekas,

Kondisi: bekas,

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 140014, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 8.000 rpm, penjepit spindle: MK 4, panjang meja: 1.270 mm, lebar meja: 305 mm, tinggi total: 2.390 mm, panjang total: 2.170 mm, lebar total: 2.510 mm, berat keseluruhan: 2.500 kg, berat benda kerja (maks.): 200 kg, model controller: Siemens 828 D, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, Dijual mesin CNC milling tipe V 760 L produksi MMD. Mesin ini digunakan sejak 2014 dalam operasi satu shift dan menunjukkan bekas pakai yang normal, namun tetap berfungsi penuh serta bekerja dengan presisi dan andal. Perlengkapan Teknis: - Kontrol: Siemens 828 D - Penukar alat otomatis - Probing 3D termasuk - Pengukuran alat otomatis - Mesin dalam kondisi teraliri listrik dan dapat dilihat sewaktu-waktu saat beroperasi Kondisi: Bekas, terawat, kondisi teknis sempurna. Rutin dirawat, siap pakai segera. Tahun pembuatan: 2014 Operasional: Satu shift Inspeksi dan uji coba dapat dilakukan dengan pengaturan waktu terlebih dahulu. Djdoxnnb Nepfx Ap Ejck

Kondisi: baik (bekas), 1 x Mesin frais universal Macmon M 100 dalam kondisi sangat baik, berasal dari sekolah kejuruan. Spesifikasi teknis dan foto tambahan akan menyusul. Dcjdpfx Apot Sdaij Ejk Mesin dapat diperiksa saat dalam kondisi menyala.

Kondisi: sangat baik (bekas), Lista drawer cabinet with milling tools Lista drawer cabinet Number of drawers: 13 Drawer type: Full extension Very high load capacity due to precise and stable design made of high-quality, welded sheet steel Cabinet color: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 720 x 710 x 1000 mm Contents: Metal circular saw blades Side and face milling cutters, cross-toothed & coupled Side and face milling cutters, cross-toothed Angular half-round milling cutters Dovetail milling cutters Dsdpfx Apjq Aa I Tj Eock Half-round milling cutters Thread milling cutters You can find more items – new and used – in our shop! International shipping costs on request!

Kondisi: hampir baru (bekas), Model Urschel L-A sangat ideal untuk memotong dadu daging ayam, kalkun dan bebek, kerang, lobster, udang, tiram, kepiting, seledri, paprika segar atau acar, jamur dan kulit buah jeruk, ceri, citron, plum kering, buah manisan, apel, peterseli. • Ketebalan atau diameter bahan masuk maksimum tidak boleh melebihi 1/2'' (12,7 mm). • Memberikan operasi berkelanjutan untuk produksi tanpa gangguan. • Dilengkapi dengan bagian kontak berbahan baja tahan karat. Dsdpfx Aeyufl Hep Eeck * Hasil produksi dapat bervariasi tergantung pada ukuran potongan dan jenis produk.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Mesin bubut CNC vertikal dengan turret 12 posisi dan alat potong yang digerakkan; Tahun pembuatan 2012, kondisi baik; Pengendali Fanuc 31i dengan Manual Guide i; Chuck 630 - diameter bubut 900; Transmisi 2 tingkat – menghasilkan torsi yang sangat tinggi; Penyetel alat, dapat dilepas; Konveyor serpihan; berbagai dudukan alat, tetap dan digerakkan; hanya sekitar 4.100 jam penggunaan; Dedpfxszrwa Ne Ap Ejck Inspeksi dapat dilakukan dengan perjanjian dan mesin dalam kondisi menyala, serta sangat dianjurkan;

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4104064175, KITOTEC CT-12000-D Hochpräzisions-Messgerät für Schneidwerkzeuge (2021) Das KITOTEC CT-12000-D ist ein universelles Hochpräzisions-Messsystem für nahezu alle Anwendungen. Es eignet sich direkt zur Vermessung spezieller Winkel an Bohrern, Gewindebohrern, Fräsern, Reibahlen, Wendeschneidplatten oder Sägeblättern, wie z. B. Stirnfreischliff, Freiwinkel, Helixwinkel, Haupt- und Nebenschneide, Teilung, Kerndurchmesser, Querschneide, Querschneidenwinkel, Achswinkel, Radius-Zentriermessung, Fadenkreuz-Peilung einfach und drehbar, Spanwinkel sowie radialer Freiwinkel. Messlänge: 250 mm Drehtisch ca. 280° schwenkbar, mit 300 mm verschiebbarer Grundplatte Stiftsystem kann flexibel positioniert werden Mess-Software Metric MT 9.02. Pixelauflösung auf höchster Zoomstufe mit 0,5x Konverterlinse: 2 Mikron Inklusive Rollomatic Concentricity Pro mit Adapterplatte - Zoomsystem 12x mit 0,67x Adapter mit abgewinkeltem optischen System - Vorsatzlinse 0,5x - Doppel-Führungsschiene in Z- und Y-Achse - Z-Achse 170 mm – Steigung 1 mm, Auflösung 0,001 mm - X-Achse 100 mm – Steigung 1 mm - Y-Achse 250 mm – Steigung 5 mm (Kugelgewindespindel), Messeinheit Auflösung 0,001 mm - Drehachse 280° bei 150 mm mit V-Prisma und Anschlag hinten, kleines V-Prisma für kleinere Werkzeuge - Kaltlicht-LED mit Schlitzringlicht und Diffusor – flexibel beweglich - Doppelte LED-Spots mit Schwanenhalsarmen - Rücklicht, parallel mit Halter beweglich, blau für automatisierte Messfunktionen Djdpfxjvi Enaj Ap Eock - Messsoftware Metric MT 9.02 - Schnittstelle zur XZ-Achsen-Auslesung zur Software - Inkl. NUC-PC 4K WIN 10 GB

Kondisi: bekas, Tool steel, round stock, shaft section Shaft, steel block, sawn shaft Cold work tool steel 1.2842 Material section Ø 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Short designation: 90MnCrV8 Cold work tool steel with high hardenability and good dimensional stability during hardening Dcsdsgmi U Sjpfx Ap Esk Applications in tool making for cutting, punching, and embossing tools. Rolls and profile rollers, measuring tools, guide rails, paper cutting knives. Delivery condition: Annealed to max. 229 HB Tensile strength in delivery condition: 770 N/mm² Hardening: 790–820 °C Tempering: 220–260 °C Working hardness: 58-62 HRC Soft annealing: 680-720°C - Medium-alloy cold work tool steel - Oil hardening 4 pieces available, price per piece

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TK4S35322107121, lebar kerja: 3.200 mm, kecepatan pemotongan: 90.000 mm/menit, ketebalan lembaran (maks.): 50 mm, panjang kerja: 3.500 mm, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! RINCIAN TEKNIS Dcedpfx Apszpxg Eo Eek Material yang sesuai: Kertas karton bergelombang, karton, lembaran busa, film, material label, tekstil, lembaran sarang lebah, dan material non-logam lainnya. Area penggunaan sebelumnya: Pemotongan tekstil. Area kerja: 3.500 x 3.200 mm Ketebalan material maksimum: 50 mm Kecepatan kerja maksimum: 1.500 mm/s RINCIAN MESIN Kondisi: Dibongkar Tegangan nominal: 380 V Frekuensi jaringan: 50/60 Hz Daya nominal: 24,38 kW PERLENGKAPAN - Meja vakum - Alat putar bertenaga - Mata pisau tarik - Alat penusuk - Sistem kamera - Sistem konveyor - Alat pemuatan gulungan - Stasiun kerja dengan komputer dan perangkat lunak

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 300 mm, rentang pengukuran sumbu Y: 250 mm, rentang pengukuran sumbu Z: 600 mm, berat keseluruhan: 700 kg, Perangkat Kombinasi untuk Pengaturan, Penyusutan, dan Pengukuran Catatan: Pada tanggal 30 Mei 2022, mesin diperiksa oleh teknisi dari perusahaan ZOLLER. Proses penyusutan saat ini tidak dapat dilakukan. Kumparan induksi dan unit kontrol perlu diganti. RINCIAN TEKNIS Rentang Pengukuran Rentang pengukuran sumbu X: 300 mm Rentang pengukuran sumbu Y: 250 mm Rentang pengukuran sumbu Z: 600 mm Djdpfxozqcvae Ap Eock Waktu Proses Waktu pendinginan: maks. 40 detik Waktu pengaturan, penyusutan, dan pengukuran kontrol termasuk pendinginan: maks. 2 menit RINCIAN MESIN Kontrol Jenis kontrol: CNC Perangkat lunak: Saturn 1 Sistem pengukuran: ZOLLER Multivision II Dimensi & Berat Dimensi mesin (P x L x T): 2.600 mm × 1.400 mm × 1.900 mm Berat mesin: 700 kg Dimensi tangki pendingin (P x L x T): 800 mm × 600 mm × 920 mm PERLENGKAPAN Sistem penahan panjang otomatis pada sumbu Z untuk pengaturan dan penyusutan ke dimensi yang diinginkan Pengukuran kontrol setelah proses penyusutan Kumparan induksi dengan penyangga (perlu diganti) Sistem pendingin dengan pendinginan air Sistem penahan panjang otomatis pada sumbu Z Kontrol CNC Perangkat lunak Saturn 1 ZOLLER Multivision II Catatan: Dudukan perkakas atau dudukan tambahan tidak termasuk.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, panjang pemotongan (maks.): 4 mm, diameter mata gergaji: 350 mm, kecepatan rotasi (maks.): 3.000 rpm, berat keseluruhan: 600 kg, daya: 4,4 kW (5,98 hp), Tidak ada harga minimum – penjualan dijamin dengan harga penawaran tertinggi! RINCIAN TEKNIS Kecepatan spindel: sekitar 3.000 RPM Panjang pemotongan: sekitar 3–4 m Diameter mata gergaji: sekitar 350 mm (300–400 mm) Sudut gergaji: 90° dan 45° RINCIAN MESIN Material yang sesuai: Profil aluminium dan PVC Kebutuhan udara bertekanan: 6–8 bar Daya motor per kepala: sekitar 1,5–2,2 kW Tegangan sambungan: 400 V Berat: sekitar 500–600 kg PERALATAN Penjepit horizontal pneumatik Dcedpfx Apjzqblae Eek