Pemotong alat

Deckel FP1 2006 Generalüberholt

Kondisi: hampir baru (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, en-GB: Universal Milling Machine Deckel FP2, repowered by FPS, year of manufacture 2013, with 3-axis digital readout Heidenhain ND 780 - As New Condition!! Technical Specifications: - Machine No.: 2202-7020, FPS No.: 3364, Year: 2013 - Fixed angle table - Spindle speed: 40 - 2,000 rpm - Feed and rapid traverse on 3 axes - Drive power: 2.2 kW - Travel X/Y/Z: 400 / 200 / 400 mm - Features: Vertical and horizontal spindle - Extendable vertical and horizontal quill - SK 40 Cgodpfovbifgsx Abhsn - Drawbar system S20x2 - Weight approx. 1,100 kg Accessories and Equipment: - 3-axis digital readout Heidenhain ND 780 - Brake motor for immediate spindle stop - Centralised lubrication - 2 x emergency stop buttons - Operating manual - Coolant system About the machine: Offered here is a Universal Milling Machine Deckel FP2 repowered by FPS, in almost new condition. The Deckel is equipped with a brake motor for immediate spindle stop. The machine has automatic centralised lubrication, and for safety is fitted with two emergency stop switches. Status as of 2013. Mechanically and electrically tested. The Heidenhain digital readout makes machining easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Kondisi: bekas, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC Operator II Control Press force: 50 tons Working length: 2090 mm Cgjdjw Iq Ugepfx Abhjn Stroke: 200 mm Throat depth: 420 mm Clearance between side frames: 1660 mm Maximum tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Electrical connection: 400 Volt, 50 Hz, 20 Amp - 8-axis CNC control Operator II, Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measurement system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever tool clamping for the top tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Bottom tool holder, 60 mm wide - 11-piece top tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) length - 2-piece bottom tool, 88° - V 8, total length 1250 mm – consisting of: 1x 835 / 1x 415 mm length - Read-off operating hours: 30,537 h - Operating manual, electrical diagram, spare parts catalogue included Weight: 4700 kg Good condition

Kondisi: bekas, Mesin Frais Alat Universal DECKEL Tipe FP 1 No. Mesin 51265 Tahun Pembuatan sekitar 1967 Perjalanan sumbu X: 300 mm Y: 150 mm Z: 340 mm Ukuran meja 600 x 200 mm Taper spindle SK 40 - S20 x 2 Kecepatan spindle 40-2000 rpm, 16 tingkat Daya motor 1,0 dan 1,6 kW, bisa pengalih kutub Koneksi listrik 380 Volt, 50 Hz - Feeding pada sumbu X dan Z - Kecepatan spindle melalui 2 kecepatan motor dan 8 tingkat transmisi - Gerakan pinol pada kepala frais vertikal 60 mm - Meja sudut dapat diputar, diputar-putar, dan dimiringkan - Pompa pendingin di kaki mesin - Lemari kontrol terpisah Cgjdpfxsghtvas Abhon Dimensi ruang yang dibutuhkan P x L x T 1100 x 1100 x 1600 mm Berat 690 kg dalam kondisi baik

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 30.979 h, nomor mesin/kendaraan: B0702A1678, jenis kontrol: Kontrol CNC, gaya tekuk (maks.): 36 t, lebar kerja: 1.020 mm, panjang langkah: 120 mm, kedalaman tenggorokan: 150 mm, jarak antara penyangga: 932 mm, tinggi pemasangan: 2.390 mm, kecepatan operasi: 25 mm/dtk, kecepatan mundur: 220 mm/dtk, jumlah sumbu: 6, tinggi meja: 955 mm, jenis mahkota: dikendalikan CNC, berat keseluruhan: 2.600 kg, panjang total: 1.900 mm, lebar total: 1.800 mm, tinggi total: 2.390 mm, tegangan masuk: 400 V, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, sistem penjepitan alat Eropa, Kondisi mesin Kondisi teknis: sangat baik, sepenuhnya berfungsi Digunakan dalam kondisi bersih, tanpa kerusakan struktural Tersedia pengujian dan pemeriksaan di lokasi Dokumentasi lengkap tersedia untuk dilihat Fitur utama dan perlengkapan Kekuatan tekuk: 36 t (360 kN) Panjang tekuk: 1020 mm Kedalaman tenggorokan: 150 mm Gerakan balok: 120 mm Cjdox Apgvspfx Abhogn Kontrol CNC: TRUMPF TASC 6000 / Touchpoint TruBend Sumbu belakang: 6-sumbu (X, R, Z1, Z2, Y1, Y2) Kecepatan kerja: 25 mm/dtk Kecepatan balik cepat: 220 mm/dtk Data teknis Jarak antar tiang: 932 mm Tinggi instalasi: 2390 mm Tinggi meja: 955 mm Jangkauan sumbu belakang X: 600 mm Jangkauan sumbu Z: 0–1020 mm Berat: 2600 kg Daya terpasang: 7 kW Catu daya: 400 V

Kondisi: bekas, Tahun pembuatan: 1985, nomor mesin/kendaraan: 294, x-travel: 400 mm y-travel: 190 mm z-travel: 310 mm Table clamping surface: 280 x 750 mm Vertical spindle overhang: 115-575 mm Number of feed speeds: 16 Feed range: 11.2-355 mm/min Tool holder: SK 40 Number of spindle speeds: 16 Spindle speed range: 56-1800 rpm Total power requirement: 2.2 kW Space requirement approx.: 1550 x 1250 x 2000 mm Machine weight approx.: 1200 kg 1 used universal tool milling machine incl. ACURITE digital readout Cjdpfovcf Hpjx Abhjgn Equipped as follows: - Vertical milling head - Fixed angle table - Separate rotary table - Micrometer screws - Various milling cutters - Various tool holders Manufacturer’s description: - All operating elements on one side with movable control panel - Additional manual traverse adjustment enlarges the working area of the machine, even beyond the table surface - Fine graduation of the speed and feed gear, step increment of 1.25

Tahun pembuatan: 1967, Kondisi: baik (bekas), nomor mesin/kendaraan: 7011/C, Table clamping surface: 310 x 1400 mm Table travel x-axis: approx. 950 mm Table travel y-axis: 325/345 mm Table travel z-axis: approx. 500 mm Cedod Rxw Hspfx Abhogn Spindle speeds: 20 - 1500 rpm Feeds longitudinal & cross: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min Electrical connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Data Umum Berat mesin: 680 kg Pergerakan Pergerakan Sumbu X: 304 mm Pergerakan Sumbu Z: 305 mm Pergerakan Sumbu Y: 254 mm Penggerak Utama Jumlah sumbu: 5 Kecepatan spindle: 30.000 RPM Cjdpfx Aox D Ip Sebhegn Daya motor spindle: 3,7 kW Meja Kapasitas beban meja: 68 kg HAAS OM-2A 5-sumbu ini diproduksi tahun 2013 dan dilengkapi dengan konfigurasi 3+2, kecepatan spindle 30.000 RPM dan daya motor 3,7 kW. Mesin ini dilengkapi penukar alat otomatis untuk 20 alat dan mampu menangani beban meja maksimum 68 kg. Jika Anda mencari mesin milling berkualitas tinggi, pertimbangkan HAAS OM-2A yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Tipe Aplikasi Milling

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2007, jam operasional: 70.000 h, jenis kontrol: Kontrol CNC, tingkat otomatisasi: semi-otomatis, jenis laser: Laser CO₂, produsen sumber laser: Mitsubishi, jam kerja laser: 14.000 h, daya laser: 4.000 W, panjang gelombang laser: 10.600 nm, ketebalan lembaran (maks.): 20 mm, ketebalan pelat baja (maks.): 20 mm, ketebalan maksimum lembaran baja tahan karat: 20 mm, tebal plat aluminium (maks.): 20 mm, panjang meja: 3.050 mm, panjang kerja: 3.000 mm, lebar kerja: 1.500 mm, jarak pergerakan sumbu X: 3.020 mm, jarak lintasan sumbu Y: 1.520 mm, jarak gerak sumbu Z: 50 mm, daya: 4 kW (5,44 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, jenis pendinginan: air, sambungan udara terkompresi: 8 batang, berat keseluruhan: 12.000 kg, panjang total: 12.000 mm, lebar total: 3.000 mm, tinggi total: 2.500 mm, tahun perombakan terakhir: 2023, Perlengkapan: Penandaan CE, dokumentasi / manual, ekstraksi asap, ekstraksi debu, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, Machine: AMADA LC-3015 X1 NT Laser Resonator: ML40CFX / 4KW Exhaust System: Herding – Delta Comp 1500-6/9 SB Chiller: Riedel – PC 1001.1MS5.I Operating Hours: see image Cedpeu Stk Esfx Abhogn Last maintenance: 10/2023

Kondisi: baik (bekas), Please read the technical specifications in full. If you are considering this machine as a potential investment, we require your complete identification with a correct telephone number and email address in order to submit an offer. DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travels: X/Y/Z: 300 x 160 x 340 mm Manual adjustment, milling head arm: 100 mm Enlarged working area: 300 x 260 mm Spindle speed, vertical/horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed control: stepless Rapid traverse X/Z axis: 1,200 mm/min Feed Y-axis: manual Fixed angle table: 600 x 210 mm Vertikal head swiveling: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data non-binding! Features: For horizontal machining, the milling head is swiveled 90 degrees and pushed to the back. 3-axis precision digital readout HEIDENHAIN Stepless feed in X/Z axes Machine was partially overhauled by a specialized company a few years ago. Equipment: 3-axis digital readout HEIDENHAIN Cgsdpexyc Tkjfx Abhen Micro coolant spray device Fixed angle table Chip tray Machine lamp Machine feet Further accessories on request! Condition: good to very good, from a training workshop Available from March 2026

Kondisi: bekas, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Cgjdpfevt D D Uex Abhen Table movements: C-axis: 360° Swivel range: +105° / -15° Universal Swivel Rotary Table: 400 x 290 mm, center bore 30H6 Table load: max. 100 kg Distance spindle nose – table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse ( X / Y / Z ): 5 m/min Input increment: 0.01 mm Total power consumption: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull stud: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power supply: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y and Z axes) - Manual swivel rotary table, C-axis = 360° table rotation, B-axis = swivel range +105° / -15° - Direct position measuring system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 gearbox stages - Fully enclosed cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Required space (L x W x H): 2000 x 2000 x 2100 mm Weight: 1750 kg Good condition