Beli Alat-Alat Bergulir bekas (20.788)

Kondisi: sangat baik (bekas), Dijual alat ukur presisi UNIVERSAL CONCENTRICITY GAGE, diproduksi di AS, dirancang untuk pengukuran konsentrisitas, runout, kelurusan, serta kontrol komponen berputar. Set lengkap dengan dial gauge Blankenhorn 0,01 mm atau Käfer 0,01 mm (Made in Germany). Basis kokoh, rel presisi, dan penjepit dengan pengaturan mikrometer. Kondisi teknis sangat baik – perangkat sepenuhnya berfungsi, berasal dari departemen kontrol kualitas Jerman. Spesifikasi teknis: • Produsen: Universal Gage Co., AS • Model: Universal Concentricity Gage Kdsdextwxuepfx Aayjw • Akurasi: 0,01 mm • Rentang pengukuran: sekitar 0–100 mm • Dial gauge: Blankenhorn / Käfer – Made in Germany • Kondisi: bekas, berfungsi, sangat baik

Kondisi: bekas, Tahun pembuatan: 2014, 3d-coordinate-2014-lukas-industrie Kdjdpfxewku Hye Aayow

Kondisi: sangat baik (bekas), SK 50 tool holders 60 pieces Kdodpfxst Uztlo Aayow (Item no. 28529) Weight: 275 kg

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Mikron WF 3S with 3-axis active digital readout Heidenhain TNC 114 and infinitely variable feed Technical data: >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed in all 3 axes from 1-750 mm/min Kdsdpfxjxu Hkcs Aayow >> Rapid traverse in 3 axes: 1400 mm/min >> Travel X/Y/Z: 500/500/380 mm >> Vertical quill - SK40 extendable >> Weight: approx. 1600 kg Accessories and features: >> 3-axis active digital readout Heidenhain TNC 114 >> Centralized lubrication >> Operating manual, programming manual, electrical schematics About the machine: For sale is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain TNC 114 path control, allowing axis travel to a programmed dimension (X, Y, or Z) and automatic stop upon reaching it. Four different zero points can be set; measurements can be entered in either absolute or incremental mode. The feed rate can be adjusted steplessly from 0-750 mm/min even during milling, and rapid traverse is possible at the push of a button. Spindle speed is adjustable in steps from 50 to 2240 rpm, but only when at a standstill. The vertical milling head is mounted with three screws and can be removed or reattached in just 2 minutes. It is manually fastened using the joint arm seen on the left of the machine and simply swung aside. The standout feature of this machine is its large travel range relative to its size: Z=380 mm, X=500 mm, Y=500 mm. The machine also features electronic protection for the vertical spindle. Mechanically and electrically tested. You are welcome to inspect and test the machine on site under power.

Kondisi: baik (bekas), Tahun pembuatan: 1976, Mesin frais Deckel FP1, meja sudut tetap, dudukan spindle SK 40. Rem spindle. Aksesori: penahan lawan, berbagai collet penjepit. Dalam kondisi baik dan siap pakai. Dapat didemonstrasikan dengan listrik sesuai kesepakatan. Kodpsxw T Efjfx Aayedw

Kondisi: baik (bekas), 1 unit alat penguji kekerasan bekas Merek: Mitutoyo Tipe: Wizard 810 208 D Kdedpfx Aaoxup Uweysw Metode pengujian: Rockwell Brinell

Kondisi: bekas, Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Universal tool grinding machine AU 150 with integrated Haller UFS 155 The AU 150 is the ideal solution for the manual re-sharpening of tools – an indispensable asset in tool grinding shops, maintenance departments of metalworking companies, as well as in training workshops. Whenever automation is not economical or appropriate, the AU 150 impresses with its precision and versatility. Thanks to the integrated Haller UFS 155, the machine offers maximum functionality and efficiency when grinding a wide variety of tools. Your advantages at a glance: - Maximum precision in re-sharpening - Cost-effective even for small batches and special tools Kdjdowl Amwspfx Aaysw - Robust construction for daily use - Easy operation and quick setup times Typical fields of application: - Re-sharpening of milling tools - Grinding of taps, reamers, step tools - Machining of lathe tools and other cutting tools made of HSS or carbide (HM) The AU 150 stands for universal versatility, long-lasting quality, and top-level manual grinding expertise.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis Heidenhain digital readout Original condition!!! Ksdpfeu Nvxmsx Aaysdw Technical data: >> Machine No. 56560/08 Year of manufacture: approx. 1975 >> Fixed angular table >> Spindle speeds: 40 - 2000 rpm >> Feed on 2 axes >> Motor power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories & equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and more precise. You are welcome to view and test the Deckel under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1978, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis K&C digital readout, stepless feed, in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse Kdjdpst Aav Iefx Aaysw >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Accessories and Features: >> 3-axis K&C digital display newly installed, with manufacturer's warranty and operating manual. Display unit: setting of reference points and zero points, coordinate input, mm/inch selection, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: Offered here is a Universal Milling Machine Deckel FP1 in excellent condition. The machine has minimal play in the cranks and all spindles move smoothly. All bellows are new. This later FP1 model features stepless feed on two axes, and also has rapid traverse. An oil change has been carried out. The machine has been mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. You are welcome to view and test the machine under power at our premises.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with New 3-Axis K&C Digital Readout and Stepless Feed on All Axes – Excellent Condition Technical Data: >> Year of manufacture: 1985 Machine no.: 2102-2867 >> Swivel-tilt rotary table (recently planed) >> Spindle speed range: 40 – 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes Ksdjt Aarpopfx Aayodw >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the column >> Vertical and horizontal quill – SK40 taper >> Drawbar system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C – newly installed, with manufacturer warranty and user manual. Display unit: reference points, set zero points, input of coordinates, mm/inch switching, absolute/incremental coordinates, circle functions, hole patterns, radius milling functions, and more. >> Coolant system >> Operating manual, spare parts diagram About the machine: Offered is a universal milling machine Deckel FP1 from 1985 in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speed, the milling machine runs very quietly. This newer FP1 model features stepless feed regulation on all three axes, as well as rapid traverse on these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital readout from K&C makes operation easier and even more precise. Arrange a viewing and live test operation on site under power.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1, repowered by FPS, year of manufacture 2010, with 3-axis Heidenhain ND 780 digital readout – As new condition!! Technical Data: >> Machine no.: 2101-51084, year 2011 >> Rigid angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal spindle taper: SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain ND 780 Kjdpfx Aowpi Dqjaysdw >> Hydraulic vise >> Collets >> Tool holders >> Milling cutters >> Operating manual >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine, repowered by FPS, in like-new condition. The scope of delivery includes a hydraulic vise with rotary base, collets, tool holders, and milling cutters. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel FP1 live under power at our facility. The machine is available immediately.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF, Overhauled in 2006, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill – SK40 taper >> Spindle brake >> Drawbar system S20x2 Kdedpfx Aovb Ud Ujaysw >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine leveling feet About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition. The Deckel features minimal backlash and all spindles move easily. An oil change has been carried out. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen little use since. The RSF digital readout makes operation easier and more precise. Take advantage of the opportunity to view and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed – Excellent CONDITION Technical data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Kodpeu Racrsfx Aayodw Accessories and equipment: Dpbyzb >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, the feed in all three axes is steplessly adjustable, and the machine also features rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can input measurements, and the machine will automatically move to the set positions. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed Excellent Condition Technical Data: >> Year of Manufacture: 1992 Machine No.: 2102-6289 >> Fixed angle table (freshly planed) >> Speed range: 40 - 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300 / 160 / 340 mm >> Vertical milling head on spindle carrier adjustable by 100mm >> Vertical and horizontal quill - ISO 40 taper (SK40) >> Drawbar system: S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis Heidenhain TNC 113 digital readout >> Coolant device >> Operating manual, spare parts list About the machine: For sale is a universal milling machine Deckel FP1, year 1992, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, feed can be infinitely adjusted on all three axes; rapid traverse is also available on these axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions that the machine will automatically approach. The FP1 was previously in a training workshop, where it was only used occasionally. Oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to view and test the machine under power on site. Kdjdpou T D Nrofx Aayew

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit at FA Huttelmaier Very good CONDITION Technical Data: >> Year of manufacture: 1985, Machine No. 2102-2891 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle arm >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC 111 >> Coolant system >> Operating manual, spare parts list Kdsdou Nvwvopfx Aayew About the Machine: Offered is a Deckel FP1 universal milling machine, year 1985, in very good condition. The FP1 was completely overhauled in 2008 by the company Huttelmaier. The machine shows minimal play in the handwheels, and all spindles move smoothly. Even at maximum rotation speed, the milling machine runs very smoothly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position controller, you can enter desired dimensions, and the machine will automatically position to them. The FP1 was located in a training facility, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and more precise. Take this opportunity to inspect and test this gem on site under power.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1, repowered by FPS, year of manufacture 2010, with 3-axis digital display Heidenhain ND 780. As new condition! Technical details: >> Machine No. 55249/08, year 2010 >> Fixed-angle table >> Spindle speed: 40 - 2000 rpm >> Feed: 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar: S20x2 >> Weight approx. 700 kg Equipment and accessories: >> 3-axis digital display Heidenhain ND 780 >> Hydraulic machine vise >> Collets Kdedpfx Aaoxu Hbhjysw >> Tool holders >> Cutters >> Operating manual >> Coolant system About the machine: For sale is a universal milling machine Deckel FP1 repowered by FPS, in like-new condition. The package includes a hydraulic vise with swivel base, collets, tool holders, and cutters. Mechanically and electrically inspected. The Heidenhain digital readout simplifies and improves accuracy of operation. You are welcome to inspect and test the Deckel under power at our location. The machine is immediately available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP2 with 3-axis Aktiv TNC 113 Heidenhain digital readout and infinitely variable feed in TOP condition Technical Data: >> Year of manufacture: 1979 Machine no.: 2202-10777 >> Rigid angle table (freshly planed) >> Spindle speed: 25 - 2500 rpm Kodpfeuc Ubwex Aayodw >> Infinitely variable feed in 3 axes >> Rapid traverse on 3 axes >> Motor power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertically extendable quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 1400 kg Accessories and features: >> 3-axis TNC 113 Aktiv digital readout Heidenhain >> Coolant system >> Central lubrication About the machine: For sale is a universal milling machine Deckel FP2 in very good condition. The FP2 comes from a laboratory of a state-owned facility, where it saw only limited use. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. On this later FP2 model, the feed is infinitely adjustable on all three axes, and the machine further features rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With this Heidenhain positioning control, you can enter dimensions and the machine will automatically move to the set position. An oil change has been performed. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take this opportunity to view and test this machine under power on site.

Kondisi: hampir baru (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed – As-new condition Technical Specifications: >> Year of manufacture: 1987 Machine No. 2102-3536 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes Kdodpfx Asu R D I Sjayew >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be displaced on spindle carrier by 100 mm >> Vertical and horizontal quills - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital display Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalog About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in original as-new condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, and the machine also features rapid traverse in these axes. The active 3-axis digital readout is a major advantage. With this Heidenhain TNC113 system, you can enter target positions, and the machine will automatically move to them. The FP1 was used in a training facility and was only operated occasionally. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this gem under power on site.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed, light grey, excellent CONDITION Technical Data: >> Year of manufacture: ca. 1990, Machine No. 2102-5231 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Coolant system >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has minimal backlash, and all spindles move freely. Even at maximum spindle speeds, the milling machine runs very smoothly. This newer FP1 model features stepless feed adjustment in all three axes, and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, you can enter dimensions which the machine will move to automatically. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem under power on site. Kodpfx Aasxu E R Isyodw The machine is immediately available.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Universal tool grinding machine Michael Deckel S11 speed, year of manufacture 2002, in very good condition!! Technical data: >> Year of manufacture: 2002 >> Serial no.: 2197 Clamping range: >> Clamping plate of the tool carriage: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm Motion range: >> Working travels Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool carriage: 100 mm Vertical adjustment of grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels Tool holder: 220 mm Grinding head support: 800 mm >> Swivel angles Grinding head support: 360 degrees Grinding head: 360 degrees Tool holder: 360 degrees Kedpfx Aaswrnf Ejyodw Grinding spindle: Three-phase drive motor: 1.1 kW at 2,800 rpm Infinitely variable spindle speeds: 2,000 to 12,000 rpm Max. grinding wheel diameter: 125 mm Max. cutting disc diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (depth x width x height): 800 x 1100 x 1760 mm Space requirement (including operation): 2.5 x 2.3 m Accessories and equipment: >> See photos About the machine: For sale is a universal tool grinding machine of the brand Michael Deckel S11 speed. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground surprisingly quickly, economically, and flexibly, all with maximum operator comfort. The Deckel S11 speed is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Universal tool grinding machine Michael Deckel S11 in very good condition!! Technical data: >> Year of manufacture: 1992 >> Serial no.: 1651 Clamping range: >> Clamping surface of the tool slide: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter for overhung mounting in the universal indexing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slots on machine base: 12 mm >> T-slots on grinding head, tool slide and accessories: 8 mm Range of movement: >> Working travels Grinding stroke: 190 mm Grinding stroke when helical grinding: 190 mm Cross adjustment of the tool slide: 100 mm Vertical adjustment of the grinding head: 325 mm Longitudinal adjustment of the grinding spindle: 5 mm >> Coarse adjustment travels Tool carrier: 220 mm Grinding head carrier: 800 mm Universal indexing head on tool slide: 330 mm >> Swivel angles Grinding head carrier: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Grinding spindle: Three-phase drive motor: 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Space requirement (including operation): 2.5 x 2.3 m Accessories and equipment: >> Opto-electronic measuring device with microscope and digital display >> Radius grinding attachment SK40 >> Handwheel device for tool slide >> Extraction unit >> Machine lamp Kdsdpfx Aasm E T Ansyjw About the machine: For sale is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small batches can be ground remarkably fast, efficiently, and flexibly, all with maximum operating comfort. The Deckel S11 is in very good condition. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Michael Deckel S5 tool grinding machine in very good condition Kdsdpjpr U Etofx Aayjw Technical Data: >> Year of manufacture: 03/1995 >> Maximum grinding wheel diameter: 100 mm >> Spindle speed: 5,600 rpm >> Power consumption: 1.5 kW >> Weight: 450 kg Accessories: >> Swiveling dividing head SK40 >> Various SK40 tool holders About the machine: For sale is a Michael Deckel S5 tool grinding machine. This machine is suitable for grinding high-precision parts. The Deckel S5 is in very good condition. Mechanically and electrically tested. Take the opportunity to inspect and test the machine under power on site.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-universal-tool-grinding-machine-michael-deckel-s11-with-acces sories-and-tool-cabinet-in-very-good-condition-technical-data-yea r-of-manufacture-1992-serial-no-1673-clamping-range-mounting-surf ace-of-tool-slide-500-x-180-mm-max-tool-diameter-between-centers- 130-mm-max-tool-diameter-with-overhung-mounting-in-the-universal- dividing-head-620-mm-max-tool-length-between-centers-270-mm-t-slo ts-machine-base-12-mm-t-slots-grinding-head-tool-slide-and-access ories-8-mm-travel-range-working-travel-grinding-stroke-190-mm-gri nding-stroke-for-helix-grinding-190-mm-cross-travel-tool-slide-10 0-mm-vertical-travel-grinding-head-325-mm-longitudinal-travel-gri nding-spindle-5-mm-coarse-adjustment-travel-tool-carrier-220-mm-g rinding-head-carrier-800-mm-universal-dividing-head-on-tool-slide -330-mm-swivel-angles-grinding-head-carrier-360-degrees-grinding- head-360-degrees-tool-carrier-360-degrees-grinding-spindle-three- phase-drive-motor-1-1-kw-at-2800-rpm-spindle-speeds-infinite-2000 -to-10000-rpm-max-grinding-wheel-diameter-125-mm-max-cutting-whee l-diameter-200-mm-dimensions-weight-520-kg-dimensions-depth-x-wid th-x-height-800-x-1100-x-1760-mm-space-requirement-incl-operation -2-5-x-2-3-m-accessories-and-equipment-1-pc-tool-cabinet-with-con tents-see-pictures-about-the-machine-offered-is-a-universal-tool- grinding-machine-of-the-brand-michael-deckel-s11-the-machine-is-s uitable-for-grinding-high-precision-parts-with-the-s11-individual -parts-and-small-batches-are-processed-incredibly-fast-economical ly-and-flexibly-with-top-operating-comfort-the-deckel-s11-is-in-v ery-good-condition-and-comes-with-extensive-accessories-mechanica lly-and-electrically-tested-take-advantage-of-the-opportunity-to- view-and-test-this-machine-under-power-on-site Kjdpfxoxu E Nqs Aaysdw

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical specifications: >> Year of manufacture: approx. 1975, Machine no. 0681 >> Swivel-tilt table (newly overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse on 3 axes >> Drive power: 3 kW >> Travel (X/Y/Z): 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable - SK-40 >> Clamping system M16 >> Weight approx. 1300 kg Kdedpfjxu E I Hjx Aayow Accessories and features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the machine: Offered is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swivel-tilt table is as good as new. An oil change has been performed. Mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel on site under power. The machine is immediately available!!!

Kondisi: sangat baik (bekas), Universal tool and cutter grinder Michael Deckel S11 with accessories and tool cabinet in very good condition!! Technical data: >> Year of manufacture: 1986 >> Serial no.: 759 Clamping range: >> Clamping surface of the tool carriage: 500 x 180mm >> Max. tool diameter between centres: 130mm >> Max. tool diameter for overhung setup on universal dividing head: 620mm >> Max. tool length between centres: 270mm >> T-slot base: 12mm >> T-slots on grinding head, tool carriage, and accessories: 8mm Movement ranges: >> Working travels: Grinding stroke: 190mm Grinding stroke for spiral grinding: 190mm Cross travel of tool carriage: 100mm Vertical adjustment grinding head: 325mm Longitudinal adjustment grinding spindle: 5mm >> Coarse adjustment: Tool holder: 220mm Grinding head support: 800mm Universal dividing head on tool carriage: 330mm >> Swivel ranges: Grinding head support: 360 degrees Grinding head: 360 degrees Tool holder: 360 degrees Grinding spindle: Three-phase drive motor: 1.1kW at 2800 rpm Spindle speeds, stepless: 2000 to 12000 rpm Max. grinding wheel diameter: 125mm Max. cutoff wheel diameter: 200mm Dimensions: Weight: 520 kg Dimensions (D x W x H): 800 x 1100 x 1760mm Required space (including operation): 2.5 x 2.3 m Accessories and equipment: 1 pc tool cabinet containing: >> Universal dividing head SK40 >> Spiral and relief grinding attachment >> Radius grinding attachment SK40 >> Tailstock >> Pivoting support finger >> Machine vice >> SK40 tool holders >> Measuring holder >> Intermediate support >> Setting gauge >> Support finger for radius cutters >> Tooth supports >> Dividing head centre >> Safety covers >> 1 set of collets, as new, from 1 to 17.5mm in 0.5mm increments >> Grinding wheel arbors >> Various grinding wheels >> Indexing discs >> Extraction unit with vacuum >> Various holders and much more (as seen in the pictures) Kdsdpfxjqd N S Ds Aayew About the machine: Offered is a universal tool and cutter grinder Michael Deckel S11. This machine is suitable for grinding high-precision parts. With the S11, single parts and small batches can be ground surprisingly fast, efficiently, and flexibly, all with maximum operating convenience. The Deckel S11 is in very good condition and comes with a large range of accessories. It has been mechanically and electrically checked. Take advantage of the opportunity to inspect and test the machine under power on site.